diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sa8775p.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sa8775p.dtsi | 445 |
1 files changed, 443 insertions, 2 deletions
diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi index 2343df7e0ea4..a71b745f7a34 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi @@ -7,7 +7,9 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,sa8775p-gcc.h> +#include <dt-bindings/clock/qcom,sa8775p-gpucc.h> #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h> +#include <dt-bindings/mailbox/qcom-ipcc.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> @@ -288,6 +290,11 @@ }; }; + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -449,8 +456,8 @@ <0>, <0>, <0>, - <0>, - <0>, + <&usb_0_qmpphy>, + <&usb_1_qmpphy>, <0>, <0>, <0>, @@ -585,12 +592,355 @@ }; }; + ufs_mem_hc: ufs@1d84000 { + compatible = "qcom,sa8775p-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; + reg = <0x0 0x01d84000 0x0 0x3000>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufs_mem_phy>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + power-domains = <&gcc UFS_PHY_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + iommus = <&apps_smmu 0x100 0x0>; + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + freq-table-hz = <75000000 300000000>, + <0 0>, + <0 0>, + <75000000 300000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + status = "disabled"; + }; + + ufs_mem_phy: phy@1d87000 { + compatible = "qcom,sa8775p-qmp-ufs-phy"; + reg = <0x0 0x01d87000 0x0 0xe10>; + /* + * Yes, GCC_EDP_REF_CLKREF_EN is correct in qref. It + * enables the CXO clock to eDP *and* UFS PHY. + */ + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&gcc GCC_EDP_REF_CLKREF_EN>; + clock-names = "ref", "ref_aux", "qref"; + power-domains = <&gcc UFS_PHY_GDSC>; + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + #phy-cells = <0>; + status = "disabled"; + }; + + usb_0_hsphy: phy@88e4000 { + compatible = "qcom,sa8775p-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x088e4000 0 0x120>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + resets = <&gcc GCC_USB2_PHY_PRIM_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_0_qmpphy: phy@88e8000 { + compatible = "qcom,sa8775p-qmp-usb3-uni-phy"; + reg = <0 0x088e8000 0 0x2000>; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&gcc GCC_USB_CLKREF_EN>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", "ref", "com_aux", "pipe"; + + resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, + <&gcc GCC_USB3PHY_PHY_PRIM_BCR>; + reset-names = "phy", "phy_phy"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + #clock-cells = <0>; + clock-output-names = "usb3_prim_phy_pipe_clk_src"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_0: usb@a6f8800 { + compatible = "qcom,sa8775p-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 14 IRQ_TYPE_EDGE_RISING>, + <&pdc 15 IRQ_TYPE_EDGE_RISING>, + <&pdc 12 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + wakeup-source; + + status = "disabled"; + + usb_0_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xe000>; + interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x080 0x0>; + phys = <&usb_0_hsphy>, <&usb_0_qmpphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + usb_1_hsphy: phy@88e6000 { + compatible = "qcom,sa8775p-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x088e6000 0 0x120>; + clocks = <&gcc GCC_USB_CLKREF_EN>; + clock-names = "ref"; + resets = <&gcc GCC_USB2_PHY_SEC_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_1_qmpphy: phy@88ea000 { + compatible = "qcom,sa8775p-qmp-usb3-uni-phy"; + reg = <0 0x088ea000 0 0x2000>; + + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, + <&gcc GCC_USB_CLKREF_EN>, + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "aux", "ref", "com_aux", "pipe"; + + resets = <&gcc GCC_USB3_PHY_SEC_BCR>, + <&gcc GCC_USB3PHY_PHY_SEC_BCR>; + reset-names = "phy", "phy_phy"; + + power-domains = <&gcc USB30_SEC_GDSC>; + + #clock-cells = <0>; + clock-output-names = "usb3_sec_phy_pipe_clk_src"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_1: usb@a8f8800 { + compatible = "qcom,sa8775p-dwc3", "qcom,dwc3"; + reg = <0 0x0a8f8800 0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_SLEEP_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 8 IRQ_TYPE_EDGE_RISING>, + <&pdc 7 IRQ_TYPE_EDGE_RISING>, + <&pdc 13 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; + + power-domains = <&gcc USB30_SEC_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB30_SEC_BCR>; + + interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + wakeup-source; + + status = "disabled"; + + usb_1_dwc3: usb@a800000 { + compatible = "snps,dwc3"; + reg = <0 0x0a800000 0 0xe000>; + interrupts = <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x0a0 0x0>; + phys = <&usb_1_hsphy>, <&usb_1_qmpphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + usb_2_hsphy: phy@88e7000 { + compatible = "qcom,sa8775p-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x088e7000 0 0x120>; + clocks = <&gcc GCC_USB_CLKREF_EN>; + clock-names = "ref"; + resets = <&gcc GCC_USB3_PHY_TERT_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_2: usb@a4f8800 { + compatible = "qcom,sa8775p-dwc3", "qcom,dwc3"; + reg = <0 0x0a4f8800 0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB2_PRIM_AXI_CLK>, + <&gcc GCC_USB20_MASTER_CLK>, + <&gcc GCC_AGGRE_USB2_PRIM_AXI_CLK>, + <&gcc GCC_USB20_SLEEP_CLK>, + <&gcc GCC_USB20_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>, + <&gcc GCC_USB20_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 10 IRQ_TYPE_EDGE_RISING>, + <&pdc 9 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "pwr_event", + "dp_hs_phy_irq", + "dm_hs_phy_irq"; + + power-domains = <&gcc USB20_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB20_PRIM_BCR>; + + interconnects = <&aggre1_noc MASTER_USB2 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB2 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + wakeup-source; + + status = "disabled"; + + usb_2_dwc3: usb@a400000 { + compatible = "snps,dwc3"; + reg = <0 0x0a400000 0 0xe000>; + interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x020 0x0>; + phys = <&usb_2_hsphy>; + phy-names = "usb2-phy"; + }; + }; + tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0x0 0x01f40000 0x0 0x20000>; #hwlock-cells = <1>; }; + gpucc: clock-controller@3d90000 { + compatible = "qcom,sa8775p-gpucc"; + reg = <0x0 0x03d90000 0x0 0xa000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + clock-names = "bi_tcxo", + "gcc_gpu_gpll0_clk_src", + "gcc_gpu_gpll0_div_clk_src"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + adreno_smmu: iommu@3da0000 { + compatible = "qcom,sa8775p-smmu-500", "qcom,adreno-smmu", + "qcom,smmu-500", "arm,mmu-500"; + reg = <0x0 0x03da0000 0x0 0x20000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + dma-coherent; + power-domains = <&gpucc GPU_CC_CX_GDSC>; + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>, + <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>, + <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_HUB_CX_INT_CLK>, + <&gpucc GPU_CC_HUB_AON_CLK>; + clock-names = "gcc_gpu_memnoc_gfx_clk", + "gcc_gpu_snoc_dvm_gfx_clk", + "gpu_cc_ahb_clk", + "gpu_cc_hlos1_vote_gpu_smmu_clk", + "gpu_cc_cx_gmu_clk", + "gpu_cc_hub_cx_int_clk", + "gpu_cc_hub_aon_clk"; + interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 674 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sa8775p-pdc", "qcom,pdc"; reg = <0x0 0x0b220000 0x0 0x30000>, @@ -638,6 +988,16 @@ interrupt-controller; }; + aoss_qmp: power-management@c300000 { + compatible = "qcom,sa8775p-aoss-qmp", "qcom,aoss-qmp"; + reg = <0x0 0x0c300000 0x0 0x400>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + #clock-cells = <0>; + }; + spmi_bus: spmi@c440000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0 0x0c440000 0x0 0x1100>, @@ -809,6 +1169,80 @@ <GIC_SPI 891 IRQ_TYPE_LEVEL_HIGH>; }; + pcie_smmu: iommu@15200000 { + compatible = "qcom,sa8775p-smmu-500", "qcom,smmu-500", "arm,mmu-500"; + reg = <0x0 0x15200000 0x0 0x80000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + + interrupts = <GIC_SPI 920 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 921 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 925 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 926 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 927 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 928 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 950 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 951 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 952 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 953 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 954 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 955 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 956 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 957 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 958 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 885 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 886 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 887 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 888 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 820 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 823 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 842 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 843 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 844 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 845 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 847 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 849 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 802 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 805 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 806 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 807 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 808 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 809 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 812 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 814 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 837 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 838 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 839 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 854 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 855 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 856 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 790 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 792 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 794 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 795 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 796 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>; + }; + intc: interrupt-controller@17a00000 { compatible = "arm,gic-v3"; reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ @@ -820,6 +1254,13 @@ redistributor-stride = <0x0 0x20000>; }; + watchdog@17c10000 { + compatible = "qcom,apss-wdt-sa8775p", "qcom,kpss-wdt"; + reg = <0x0 0x17c10000 0x0 0x1000>; + clocks = <&sleep_clk>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + }; + memtimer: timer@17c20000 { compatible = "arm,armv7-timer-mem"; reg = <0x0 0x17c20000 0x0 0x1000>; |