summaryrefslogtreecommitdiff
path: root/arch/cris/arch-v32
diff options
context:
space:
mode:
Diffstat (limited to 'arch/cris/arch-v32')
-rw-r--r--arch/cris/arch-v32/boot/Makefile20
-rw-r--r--arch/cris/arch-v32/boot/compressed/Makefile26
-rw-r--r--arch/cris/arch-v32/boot/compressed/README24
-rw-r--r--arch/cris/arch-v32/boot/compressed/decompress.lds30
-rw-r--r--arch/cris/arch-v32/boot/compressed/head.S145
-rw-r--r--arch/cris/arch-v32/boot/compressed/misc.c318
-rw-r--r--arch/cris/arch-v32/boot/rescue/Makefile26
-rw-r--r--arch/cris/arch-v32/boot/rescue/head.S26
-rw-r--r--arch/cris/arch-v32/boot/rescue/rescue.lds43
-rw-r--r--arch/cris/arch-v32/drivers/mach-a3/gpio.c4
-rw-r--r--arch/cris/arch-v32/kernel/Makefile2
-rw-r--r--arch/cris/arch-v32/kernel/entry.S8
12 files changed, 10 insertions, 662 deletions
diff --git a/arch/cris/arch-v32/boot/Makefile b/arch/cris/arch-v32/boot/Makefile
deleted file mode 100644
index 99896ad60b30..000000000000
--- a/arch/cris/arch-v32/boot/Makefile
+++ /dev/null
@@ -1,20 +0,0 @@
-#
-# arch/cris/arch-v32/boot/Makefile
-#
-
-OBJCOPYFLAGS = -O binary -R .note -R .comment
-
-subdir- := compressed rescue
-targets := Image
-
-$(obj)/Image: vmlinux FORCE
- $(call if_changed,objcopy)
- @echo ' Kernel: $@ is ready'
-
-$(obj)/compressed/vmlinux: $(obj)/Image FORCE
- $(Q)$(MAKE) $(build)=$(obj)/compressed $@
- $(Q)$(MAKE) $(build)=$(obj)/rescue $(obj)/rescue/rescue.bin
-
-$(obj)/zImage: $(obj)/compressed/vmlinux
- @cp $< $@
- @echo ' Kernel: $@ is ready'
diff --git a/arch/cris/arch-v32/boot/compressed/Makefile b/arch/cris/arch-v32/boot/compressed/Makefile
deleted file mode 100644
index e176b8b69d92..000000000000
--- a/arch/cris/arch-v32/boot/compressed/Makefile
+++ /dev/null
@@ -1,26 +0,0 @@
-#
-# arch/cris/arch-v32/boot/compressed/Makefile
-#
-
-asflags-y += -I$(srctree)/include/asm/mach/ -I$(srctree)/include/asm/arch
-ccflags-y += -O2 -I$(srctree)/include/asm/mach/ -I$(srctree)/include/asm/arch
-ldflags-y += -T$(srctree)/$(src)/decompress.lds
-OBJECTS = $(obj)/head.o $(obj)/misc.o
-OBJCOPYFLAGS = -O binary --remove-section=.bss
-
-quiet_cmd_image = BUILD $@
-cmd_image = cat $(obj)/decompress.bin $(obj)/piggy.gz > $@
-
-targets := vmlinux piggy.gz decompress.o decompress.bin
-
-$(obj)/decompress.o: $(OBJECTS) FORCE
- $(call if_changed,ld)
-
-$(obj)/decompress.bin: $(obj)/decompress.o FORCE
- $(call if_changed,objcopy)
-
-$(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE
- $(call if_changed,image)
-
-$(obj)/piggy.gz: $(obj)/../Image FORCE
- $(call if_changed,gzip)
diff --git a/arch/cris/arch-v32/boot/compressed/README b/arch/cris/arch-v32/boot/compressed/README
deleted file mode 100644
index 182c5d75784b..000000000000
--- a/arch/cris/arch-v32/boot/compressed/README
+++ /dev/null
@@ -1,24 +0,0 @@
-Creation of the self-extracting compressed kernel image (vmlinuz)
------------------------------------------------------------------
-
-This can be slightly confusing because it's a process with many steps.
-
-The kernel object built by the arch/etrax100/Makefile, vmlinux, is split
-by that makefile into text and data binary files, vmlinux.text and
-vmlinux.data.
-
-Those files together with a ROM filesystem can be catted together and
-burned into a flash or executed directly at the DRAM origin.
-
-They can also be catted together and compressed with gzip, which is what
-happens in this makefile. Together they make up piggy.img.
-
-The decompressor is built into the file decompress.o. It is turned into
-the binary file decompress.bin, which is catted together with piggy.img
-into the file vmlinuz. It can be executed in an arbitrary place in flash.
-
-Be careful - it assumes some things about free locations in DRAM. It
-assumes the DRAM starts at 0x40000000 and that it is at least 8 MB,
-so it puts its code at 0x40700000, and initial stack at 0x40800000.
-
--Bjorn
diff --git a/arch/cris/arch-v32/boot/compressed/decompress.lds b/arch/cris/arch-v32/boot/compressed/decompress.lds
deleted file mode 100644
index 3c837feca3ac..000000000000
--- a/arch/cris/arch-v32/boot/compressed/decompress.lds
+++ /dev/null
@@ -1,30 +0,0 @@
-/*#OUTPUT_FORMAT(elf32-us-cris) */
-OUTPUT_ARCH (crisv32)
-
-MEMORY
- {
- dram : ORIGIN = 0x40700000,
- LENGTH = 0x00100000
- }
-
-SECTIONS
-{
- .text :
- {
- _stext = . ;
- *(.text)
- *(.rodata)
- *(.rodata.*)
- _etext = . ;
- } > dram
- .data :
- {
- *(.data)
- _edata = . ;
- } > dram
- .bss :
- {
- *(.bss)
- _end = ALIGN( 0x10 ) ;
- } > dram
-}
diff --git a/arch/cris/arch-v32/boot/compressed/head.S b/arch/cris/arch-v32/boot/compressed/head.S
deleted file mode 100644
index a4a65c5c669e..000000000000
--- a/arch/cris/arch-v32/boot/compressed/head.S
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * Code that sets up the DRAM registers, calls the
- * decompressor to unpack the piggybacked kernel, and jumps.
- *
- * Copyright (C) 1999 - 2006, Axis Communications AB
- */
-
-#define ASSEMBLER_MACROS_ONLY
-#include <hwregs/asm/reg_map_asm.h>
-#include <mach/startup.inc>
-
-#define RAM_INIT_MAGIC 0x56902387
-#define COMMAND_LINE_MAGIC 0x87109563
-
- ;; Exported symbols
-
- .globl input_data
-
- .text
-_start:
- di
-
- ;; Start clocks for used blocks.
- START_CLOCKS
-
- ;; Initialize the DRAM registers.
- cmp.d RAM_INIT_MAGIC, $r8 ; Already initialized?
- beq dram_init_finished
- nop
-
-#if defined CONFIG_ETRAXFS
-#include "../../mach-fs/dram_init.S"
-#elif defined CONFIG_CRIS_MACH_ARTPEC3
-#include "../../mach-a3/dram_init.S"
-#else
-#error Only ETRAXFS and ARTPEC-3 supported!
-#endif
-
-dram_init_finished:
-
- GIO_INIT
- ;; Setup the stack to a suitably high address.
- ;; We assume 8 MB is the minimum DRAM and put
- ;; the SP at the top for now.
-
- move.d 0x40800000, $sp
-
- ;; Figure out where the compressed piggyback image is.
- ;; It is either in [NOR] flash (we don't want to copy it
- ;; to DRAM before unpacking), or copied to DRAM
- ;; by the [NAND] flash boot loader.
- ;; The piggyback image is at _edata, but relative to where the
- ;; image is actually located in memory, not where it is linked
- ;; (the decompressor is linked at 0x40700000+ and runs there).
- ;; Use (_edata - herami) as offset to the current PC.
-
-hereami:
- lapcq ., $r5 ; get PC
- and.d 0x7fffffff, $r5 ; strip any non-cache bit
- move.d $r5, $r0 ; source address of 'herami'
- add.d _edata, $r5
- sub.d hereami, $r5 ; r5 = flash address of '_edata'
- move.d hereami, $r1 ; destination
-
- ;; Copy text+data to DRAM
-
- move.d _edata, $r2 ; end destination
-1: move.w [$r0+], $r3 ; from herami+ source
- move.w $r3, [$r1+] ; to hereami+ destination (linked address)
- cmp.d $r2, $r1 ; finish when destination == _edata
- bcs 1b
- nop
- move.d input_data, $r0 ; for the decompressor
- move.d $r5, [$r0] ; for the decompressor
-
- ;; Clear the decompressors BSS (between _edata and _end)
-
- moveq 0, $r0
- move.d _edata, $r1
- move.d _end, $r2
-1: move.w $r0, [$r1+]
- cmp.d $r2, $r1
- bcs 1b
- nop
-
- ;; Save command line magic and address.
- move.d _cmd_line_magic, $r0
- move.d $r10, [$r0]
- move.d _cmd_line_addr, $r0
- move.d $r11, [$r0]
-
- ;; Save boot source indicator
- move.d _boot_source, $r0
- move.d $r12, [$r0]
-
- ;; Do the decompression and save compressed size in _inptr
-
- jsr decompress_kernel
- nop
-
- ;; Restore boot source indicator
- move.d _boot_source, $r12
- move.d [$r12], $r12
-
- ;; Restore command line magic and address.
- move.d _cmd_line_magic, $r10
- move.d [$r10], $r10
- move.d _cmd_line_addr, $r11
- move.d [$r11], $r11
-
- ;; Put start address of root partition in r9 so the kernel can use it
- ;; when mounting from flash
- move.d input_data, $r0
- move.d [$r0], $r9 ; flash address of compressed kernel
- move.d inptr, $r0
- add.d [$r0], $r9 ; size of compressed kernel
- cmp.d 0x40000000, $r9 ; image in DRAM ?
- blo enter_kernel ; no, must be [NOR] flash, jump
- nop ; delay slot
- and.d 0x001fffff, $r9 ; assume compressed kernel was < 2M
-
-enter_kernel:
- ;; Enter the decompressed kernel
- move.d RAM_INIT_MAGIC, $r8 ; Tell kernel that DRAM is initialized
- jump 0x40004000 ; kernel is linked to this address
- nop
-
- .data
-
-input_data:
- .dword 0 ; used by the decompressor
-_cmd_line_magic:
- .dword 0
-_cmd_line_addr:
- .dword 0
-_boot_source:
- .dword 0
-
-#if defined CONFIG_ETRAXFS
-#include "../../mach-fs/hw_settings.S"
-#elif defined CONFIG_CRIS_MACH_ARTPEC3
-#include "../../mach-a3/hw_settings.S"
-#else
-#error Only ETRAXFS and ARTPEC-3 supported!
-#endif
diff --git a/arch/cris/arch-v32/boot/compressed/misc.c b/arch/cris/arch-v32/boot/compressed/misc.c
deleted file mode 100644
index 3595e16e82bc..000000000000
--- a/arch/cris/arch-v32/boot/compressed/misc.c
+++ /dev/null
@@ -1,318 +0,0 @@
-/*
- * misc.c
- *
- * This is a collection of several routines from gzip-1.0.3
- * adapted for Linux.
- *
- * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
- * puts by Nick Holloway 1993, better puts by Martin Mares 1995
- * adaptation for Linux/CRIS Axis Communications AB, 1999
- *
- */
-
-/* where the piggybacked kernel image expects itself to live.
- * it is the same address we use when we network load an uncompressed
- * image into DRAM, and it is the address the kernel is linked to live
- * at by vmlinux.lds.S
- */
-
-#define KERNEL_LOAD_ADR 0x40004000
-
-
-#include <linux/types.h>
-#include <hwregs/reg_rdwr.h>
-#include <hwregs/reg_map.h>
-#include <hwregs/ser_defs.h>
-#include <hwregs/pinmux_defs.h>
-#ifdef CONFIG_CRIS_MACH_ARTPEC3
-#include <hwregs/clkgen_defs.h>
-#endif
-
-/*
- * gzip declarations
- */
-
-#define OF(args) args
-#define STATIC static
-
-void* memset(void* s, int c, size_t n);
-void* memcpy(void* __dest, __const void* __src,
- size_t __n);
-
-#define memzero(s, n) memset ((s), 0, (n))
-
-
-typedef unsigned char uch;
-typedef unsigned short ush;
-typedef unsigned long ulg;
-
-#define WSIZE 0x8000 /* Window size must be at least 32k, */
- /* and a power of two */
-
-static uch *inbuf; /* input buffer */
-static uch window[WSIZE]; /* Sliding window buffer */
-
-unsigned inptr = 0; /* index of next byte to be processed in inbuf
- * After decompression it will contain the
- * compressed size, and head.S will read it.
- */
-
-static unsigned outcnt = 0; /* bytes in output buffer */
-
-/* gzip flag byte */
-#define ASCII_FLAG 0x01 /* bit 0 set: file probably ascii text */
-#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
-#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */
-#define ORIG_NAME 0x08 /* bit 3 set: original file name present */
-#define COMMENT 0x10 /* bit 4 set: file comment present */
-#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
-#define RESERVED 0xC0 /* bit 6,7: reserved */
-
-#define get_byte() inbuf[inptr++]
-
-/* Diagnostic functions */
-#ifdef DEBUG
-# define Assert(cond,msg) {if(!(cond)) error(msg);}
-# define Trace(x) fprintf x
-# define Tracev(x) {if (verbose) fprintf x ;}
-# define Tracevv(x) {if (verbose>1) fprintf x ;}
-# define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
-#else
-# define Assert(cond,msg)
-# define Trace(x)
-# define Tracev(x)
-# define Tracevv(x)
-# define Tracec(c,x)
-# define Tracecv(c,x)
-#endif
-
-static void flush_window(void);
-static void error(char *m);
-
-extern char *input_data; /* lives in head.S */
-
-static long bytes_out;
-static uch *output_data;
-static unsigned long output_ptr;
-
-static void error(char *m);
-
-static void puts(const char *);
-
-/* the "heap" is put directly after the BSS ends, at end */
-
-extern int _end;
-static long free_mem_ptr = (long)&_end;
-static long free_mem_end_ptr;
-
-#include "../../../../../lib/inflate.c"
-
-/* decompressor info and error messages to serial console */
-
-static inline void
-serout(const char *s, reg_scope_instances regi_ser)
-{
- reg_ser_rs_stat_din rs;
- reg_ser_rw_dout dout = {.data = *s};
-
- do {
- rs = REG_RD(ser, regi_ser, rs_stat_din);
- }
- while (!rs.tr_rdy);/* Wait for transceiver. */
-
- REG_WR(ser, regi_ser, rw_dout, dout);
-}
-
-static void
-puts(const char *s)
-{
-#ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
- while (*s) {
-#ifdef CONFIG_ETRAX_DEBUG_PORT0
- serout(s, regi_ser0);
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT1
- serout(s, regi_ser1);
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT2
- serout(s, regi_ser2);
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT3
- serout(s, regi_ser3);
-#endif
- *s++;
- }
-/* CONFIG_ETRAX_DEBUG_PORT_NULL */
-#endif
-}
-
-void*
-memset(void* s, int c, size_t n)
-{
- int i;
- char *ss = (char*)s;
-
- for (i=0;i<n;i++) ss[i] = c;
-
- return s;
-}
-
-void*
-memcpy(void* __dest, __const void* __src,
- size_t __n)
-{
- int i;
- char *d = (char *)__dest, *s = (char *)__src;
-
- for (i=0;i<__n;i++) d[i] = s[i];
-
- return __dest;
-}
-
-/* ===========================================================================
- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
- * (Used for the decompressed data only.)
- */
-
-static void
-flush_window()
-{
- ulg c = crc; /* temporary variable */
- unsigned n;
- uch *in, *out, ch;
-
- in = window;
- out = &output_data[output_ptr];
- for (n = 0; n < outcnt; n++) {
- ch = *out++ = *in++;
- c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
- }
- crc = c;
- bytes_out += (ulg)outcnt;
- output_ptr += (ulg)outcnt;
- outcnt = 0;
-}
-
-static void
-error(char *x)
-{
- puts("\r\n\n");
- puts(x);
- puts("\r\n\n -- System halted\n");
-
- while(1); /* Halt */
-}
-
-void
-setup_normal_output_buffer(void)
-{
- output_data = (char *)KERNEL_LOAD_ADR;
-}
-
-static inline void
-serial_setup(reg_scope_instances regi_ser)
-{
- reg_ser_rw_xoff xoff;
- reg_ser_rw_tr_ctrl tr_ctrl;
- reg_ser_rw_rec_ctrl rec_ctrl;
- reg_ser_rw_tr_baud_div tr_baud;
- reg_ser_rw_rec_baud_div rec_baud;
-
- /* Turn off XOFF. */
- xoff = REG_RD(ser, regi_ser, rw_xoff);
-
- xoff.chr = 0;
- xoff.automatic = regk_ser_no;
-
- REG_WR(ser, regi_ser, rw_xoff, xoff);
-
- /* Set baudrate and stopbits. */
- tr_ctrl = REG_RD(ser, regi_ser, rw_tr_ctrl);
- rec_ctrl = REG_RD(ser, regi_ser, rw_rec_ctrl);
- tr_baud = REG_RD(ser, regi_ser, rw_tr_baud_div);
- rec_baud = REG_RD(ser, regi_ser, rw_rec_baud_div);
-
- tr_ctrl.stop_bits = 1; /* 2 stop bits. */
- tr_ctrl.en = 1; /* enable transmitter */
- rec_ctrl.en = 1; /* enabler receiver */
-
- /*
- * The baudrate setup used to be a bit fishy, but now transmitter and
- * receiver are both set to the intended baud rate, 115200.
- * The magic value is 29.493 MHz.
- */
- tr_ctrl.base_freq = regk_ser_f29_493;
- rec_ctrl.base_freq = regk_ser_f29_493;
- tr_baud.div = (29493000 / 8) / 115200;
- rec_baud.div = (29493000 / 8) / 115200;
-
- REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl);
- REG_WR(ser, regi_ser, rw_tr_baud_div, tr_baud);
- REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl);
- REG_WR(ser, regi_ser, rw_rec_baud_div, rec_baud);
-}
-
-void
-decompress_kernel(void)
-{
- char revision;
-
-#if defined(CONFIG_ETRAX_DEBUG_PORT1) || \
- defined(CONFIG_ETRAX_DEBUG_PORT2) || \
- defined(CONFIG_ETRAX_DEBUG_PORT3)
- reg_pinmux_rw_hwprot hwprot;
-
-#ifdef CONFIG_CRIS_MACH_ARTPEC3
- reg_clkgen_rw_clk_ctrl clk_ctrl;
-
- /* Enable corresponding clock region when serial 1..3 selected */
-
- clk_ctrl = REG_RD(clkgen, regi_clkgen, rw_clk_ctrl);
- clk_ctrl.sser_ser_dma6_7 = regk_clkgen_yes;
- REG_WR(clkgen, regi_clkgen, rw_clk_ctrl, clk_ctrl);
-#endif
-
- /* pinmux setup for ports 1..3 */
- hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot);
-#endif
-
-#ifdef CONFIG_ETRAX_DEBUG_PORT0
- serial_setup(regi_ser0);
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT1
- hwprot.ser1 = regk_pinmux_yes;
- serial_setup(regi_ser1);
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT2
- hwprot.ser2 = regk_pinmux_yes;
- serial_setup(regi_ser2);
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT3
- hwprot.ser3 = regk_pinmux_yes;
- serial_setup(regi_ser3);
-#endif
-#if defined(CONFIG_ETRAX_DEBUG_PORT1) || \
- defined(CONFIG_ETRAX_DEBUG_PORT2) || \
- defined(CONFIG_ETRAX_DEBUG_PORT3)
- REG_WR(pinmux, regi_pinmux, rw_hwprot, hwprot);
-#endif
-
- /* input_data is set in head.S */
- inbuf = input_data;
-
- setup_normal_output_buffer();
-
- makecrc();
-
- __asm__ volatile ("move $vr,%0" : "=rm" (revision));
- if (revision < 32)
- {
- puts("You need an ETRAX FS to run Linux 2.6/crisv32.\r\n");
- while(1);
- }
-
- puts("Uncompressing Linux...\r\n");
- gunzip();
- puts("Done. Now booting the kernel.\r\n");
-}
diff --git a/arch/cris/arch-v32/boot/rescue/Makefile b/arch/cris/arch-v32/boot/rescue/Makefile
deleted file mode 100644
index 566aac663a38..000000000000
--- a/arch/cris/arch-v32/boot/rescue/Makefile
+++ /dev/null
@@ -1,26 +0,0 @@
-#
-# Makefile for rescue (bootstrap) code
-#
-
-CC = gcc-cris -mlinux -march=v32 $(LINUXINCLUDE)
-ccflags-y += -O2 -I $(srctree)/include/asm/arch/mach/ \
- -I $(srctree)/include/asm/arch
-asflags-y += -I $(srctree)/include/asm/arch/mach/ -I $(srctree)/include/asm/arch
-LD = gcc-cris -mlinux -march=v32 -nostdlib
-ldflags-y += -T $(srctree)/$(src)/rescue.lds
-LDPOSTFLAGS = -lgcc
-OBJCOPYFLAGS = -O binary --remove-section=.bss
-obj-$(CONFIG_ETRAX_AXISFLASHMAP) = head.o
-OBJECT := $(obj)/head.o
-
-targets := rescue.o rescue.bin
-
-quiet_cmd_ldlibgcc = LD $@
-cmd_ldlibgcc = $(LD) $(LDFLAGS) $(filter-out FORCE,$^) $(LDPOSTFLAGS) -o $@
-
-$(obj)/rescue.o: $(OBJECTS) FORCE
- $(call if_changed,ldlibgcc)
-
-$(obj)/rescue.bin: $(obj)/rescue.o FORCE
- $(call if_changed,objcopy)
- cp -p $(obj)/rescue.bin $(objtree)
diff --git a/arch/cris/arch-v32/boot/rescue/head.S b/arch/cris/arch-v32/boot/rescue/head.S
deleted file mode 100644
index 5f846b7700a3..000000000000
--- a/arch/cris/arch-v32/boot/rescue/head.S
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Just get started by jumping to CONFIG_ETRAX_PTABLE_SECTOR to start
- * kernel decompressor.
- *
- * In practice, this only works for NOR flash (or some convoluted RAM boot)
- * and hence is not really useful for Artpec-3, so it's Etrax FS / NOR only.
- *
- */
-
-#include <mach/startup.inc>
-
-#ifdef CONFIG_ETRAX_AXISFLASHMAP
-
-;; Code
-
- .text
-start:
-
- ;; Start clocks for used blocks.
- START_CLOCKS
-
- move.d CONFIG_ETRAX_PTABLE_SECTOR, $r10
- jump $r10 ; Jump to decompressor
- nop
-
-#endif
diff --git a/arch/cris/arch-v32/boot/rescue/rescue.lds b/arch/cris/arch-v32/boot/rescue/rescue.lds
deleted file mode 100644
index 8ac646bc1a2b..000000000000
--- a/arch/cris/arch-v32/boot/rescue/rescue.lds
+++ /dev/null
@@ -1,43 +0,0 @@
-/*#OUTPUT_FORMAT(elf32-us-cris) */
-OUTPUT_ARCH (crisv32)
-/* Now that NAND support has been stripped, this file could be simplified,
- * but it doesn't do any harm on the other hand so why bother. */
-
-MEMORY
- {
- bootblk : ORIGIN = 0x38000000,
- LENGTH = 0x00004000
- intmem : ORIGIN = 0x38004000,
- LENGTH = 0x00005000
- }
-
-SECTIONS
-{
- .text :
- {
- _stext = . ;
- *(.text)
- *(.init.text)
- *(.rodata)
- *(.rodata.*)
- _etext = . ;
- } > bootblk
- .data :
- {
- *(.data)
- _edata = . ;
- } > bootblk
- .bss :
- {
- _bss = . ;
- *(.bss)
- _end = ALIGN( 0x10 ) ;
- } > intmem
-
- /* Get rid of stuff from EXPORT_SYMBOL(foo). */
- /DISCARD/ :
- {
- *(__ksymtab_strings)
- *(__ksymtab)
- }
-}
diff --git a/arch/cris/arch-v32/drivers/mach-a3/gpio.c b/arch/cris/arch-v32/drivers/mach-a3/gpio.c
index 7a87bc0ae2e8..97357cfd17bb 100644
--- a/arch/cris/arch-v32/drivers/mach-a3/gpio.c
+++ b/arch/cris/arch-v32/drivers/mach-a3/gpio.c
@@ -681,7 +681,7 @@ static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
shadow |= ~readl(dir_oe[priv->minor]) |
(arg & changeable_bits[priv->minor]);
i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
- spin_lock_irqrestore(&gpio_lock, flags);
+ spin_unlock_irqrestore(&gpio_lock, flags);
break;
case IO_CLRBITS:
spin_lock_irqsave(&gpio_lock, flags);
@@ -690,7 +690,7 @@ static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
shadow |= ~readl(dir_oe[priv->minor]) &
~(arg & changeable_bits[priv->minor]);
i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
- spin_lock_irqrestore(&gpio_lock, flags);
+ spin_unlock_irqrestore(&gpio_lock, flags);
break;
case IO_HIGHALARM:
/* Set alarm when bits with 1 in arg go high. */
diff --git a/arch/cris/arch-v32/kernel/Makefile b/arch/cris/arch-v32/kernel/Makefile
index 993d987b0078..40358355d0cb 100644
--- a/arch/cris/arch-v32/kernel/Makefile
+++ b/arch/cris/arch-v32/kernel/Makefile
@@ -9,8 +9,6 @@ obj-y := entry.o traps.o irq.o debugport.o \
process.o ptrace.o setup.o signal.o traps.o time.o \
cache.o cacheflush.o
-obj-$(CONFIG_ETRAXFS_SIM) += vcs_hook.o
-
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_ETRAX_KGDB) += kgdb.o kgdb_asm.o
obj-$(CONFIG_ETRAX_FAST_TIMER) += fasttimer.o
diff --git a/arch/cris/arch-v32/kernel/entry.S b/arch/cris/arch-v32/kernel/entry.S
index 5e674c8f7c51..435b9671bd4b 100644
--- a/arch/cris/arch-v32/kernel/entry.S
+++ b/arch/cris/arch-v32/kernel/entry.S
@@ -852,6 +852,14 @@ sys_call_table:
.long sys_fallocate
.long sys_timerfd_settime /* 325 */
.long sys_timerfd_gettime
+ .long sys_signalfd4
+ .long sys_eventfd2
+ .long sys_epoll_create1
+ .long sys_dup3 /* 330 */
+ .long sys_pipe2
+ .long sys_inotify_init1
+ .long sys_preadv
+ .long sys_pwritev
/*
* NOTE!! This doesn't have to be exact - we just have