diff options
Diffstat (limited to 'arch/m68k/68360/commproc.c')
| -rw-r--r-- | arch/m68k/68360/commproc.c | 309 |
1 files changed, 0 insertions, 309 deletions
diff --git a/arch/m68k/68360/commproc.c b/arch/m68k/68360/commproc.c deleted file mode 100644 index 14d7f35cd37b..000000000000 --- a/arch/m68k/68360/commproc.c +++ /dev/null @@ -1,309 +0,0 @@ -/* - * General Purpose functions for the global management of the - * Communication Processor Module. - * - * Copyright (c) 2000 Michael Leslie <mleslie@lineo.com> - * Copyright (c) 1997 Dan Malek (dmalek@jlc.net) - * - * In addition to the individual control of the communication - * channels, there are a few functions that globally affect the - * communication processor. - * - * Buffer descriptors must be allocated from the dual ported memory - * space. The allocator for that is here. When the communication - * process is reset, we reclaim the memory available. There is - * currently no deallocator for this memory. - * The amount of space available is platform dependent. On the - * MBX, the EPPC software loads additional microcode into the - * communication processor, and uses some of the DP ram for this - * purpose. Current, the first 512 bytes and the last 256 bytes of - * memory are used. Right now I am conservative and only use the - * memory that can never be used for microcode. If there are - * applications that require more DP ram, we can expand the boundaries - * but then we have to be careful of any downloaded microcode. - * - */ - -/* - * Michael Leslie <mleslie@lineo.com> - * adapted Dan Malek's ppc8xx drivers to M68360 - * - */ - -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/param.h> -#include <linux/string.h> -#include <linux/mm.h> -#include <linux/interrupt.h> -#include <asm/irq.h> -#include <asm/m68360.h> -#include <asm/commproc.h> - -/* #include <asm/page.h> */ -/* #include <asm/pgtable.h> */ -extern void *_quicc_base; -extern unsigned int system_clock; - - -static uint dp_alloc_base; /* Starting offset in DP ram */ -static uint dp_alloc_top; /* Max offset + 1 */ - -#if 0 -static void *host_buffer; /* One page of host buffer */ -static void *host_end; /* end + 1 */ -#endif - -/* struct cpm360_t *cpmp; */ /* Pointer to comm processor space */ - -QUICC *pquicc; -/* QUICC *quicc_dpram; */ /* mleslie - temporary; use extern pquicc elsewhere instead */ - - -/* CPM interrupt vector functions. */ -struct cpm_action { - irq_handler_t handler; - void *dev_id; -}; -static struct cpm_action cpm_vecs[CPMVEC_NR]; -static void cpm_interrupt(int irq, void * dev, struct pt_regs * regs); -static void cpm_error_interrupt(void *); - -/* prototypes: */ -void cpm_install_handler(int vec, irq_handler_t handler, void *dev_id); -void m360_cpm_reset(void); - - - - -void __init m360_cpm_reset() -{ -/* pte_t *pte; */ - - pquicc = (struct quicc *)(_quicc_base); /* initialized in crt0_rXm.S */ - - /* Perform a CPM reset. */ - pquicc->cp_cr = (SOFTWARE_RESET | CMD_FLAG); - - /* Wait for CPM to become ready (should be 2 clocks). */ - while (pquicc->cp_cr & CMD_FLAG); - - /* On the recommendation of the 68360 manual, p. 7-60 - * - Set sdma interrupt service mask to 7 - * - Set sdma arbitration ID to 4 - */ - pquicc->sdma_sdcr = 0x0740; - - - /* Claim the DP memory for our use. - */ - dp_alloc_base = CPM_DATAONLY_BASE; - dp_alloc_top = dp_alloc_base + CPM_DATAONLY_SIZE; - - - /* Set the host page for allocation. - */ - /* host_buffer = host_page_addr; */ - /* host_end = host_page_addr + PAGE_SIZE; */ - - /* pte = find_pte(&init_mm, host_page_addr); */ - /* pte_val(*pte) |= _PAGE_NO_CACHE; */ - /* flush_tlb_page(current->mm->mmap, host_buffer); */ - - /* Tell everyone where the comm processor resides. - */ -/* cpmp = (cpm360_t *)commproc; */ -} - - -/* This is called during init_IRQ. We used to do it above, but this - * was too early since init_IRQ was not yet called. - */ -void -cpm_interrupt_init(void) -{ - /* Initialize the CPM interrupt controller. - * NOTE THAT pquicc had better have been initialized! - * reference: MC68360UM p. 7-377 - */ - pquicc->intr_cicr = - (CICR_SCD_SCC4 | CICR_SCC_SCC3 | CICR_SCB_SCC2 | CICR_SCA_SCC1) | - (CPM_INTERRUPT << 13) | - CICR_HP_MASK | - (CPM_VECTOR_BASE << 5) | - CICR_SPS; - - /* mask all CPM interrupts from reaching the cpu32 core: */ - pquicc->intr_cimr = 0; - - - /* mles - If I understand correctly, the 360 just pops over to the CPM - * specific vector, obviating the necessity to vector through the IRQ - * whose priority the CPM is set to. This needs a closer look, though. - */ - - /* Set our interrupt handler with the core CPU. */ -/* if (request_irq(CPM_INTERRUPT, cpm_interrupt, 0, "cpm", NULL) != 0) */ -/* panic("Could not allocate CPM IRQ!"); */ - - /* Install our own error handler. - */ - /* I think we want to hold off on this one for the moment - mles */ - /* cpm_install_handler(CPMVEC_ERROR, cpm_error_interrupt, NULL); */ - - /* master CPM interrupt enable */ - /* pquicc->intr_cicr |= CICR_IEN; */ /* no such animal for 360 */ -} - - - -/* CPM interrupt controller interrupt. -*/ -static void -cpm_interrupt(int irq, void * dev, struct pt_regs * regs) -{ - /* uint vec; */ - - /* mles: Note that this stuff is currently being performed by - * M68360_do_irq(int vec, struct pt_regs *fp), in ../ints.c */ - - /* figure out the vector */ - /* call that vector's handler */ - /* clear the irq's bit in the service register */ - -#if 0 /* old 860 stuff: */ - /* Get the vector by setting the ACK bit and then reading - * the register. - */ - ((volatile immap_t *)IMAP_ADDR)->im_cpic.cpic_civr = 1; - vec = ((volatile immap_t *)IMAP_ADDR)->im_cpic.cpic_civr; - vec >>= 11; - - - if (cpm_vecs[vec].handler != 0) - (*cpm_vecs[vec].handler)(cpm_vecs[vec].dev_id); - else - ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr &= ~(1 << vec); - - /* After servicing the interrupt, we have to remove the status - * indicator. - */ - ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cisr |= (1 << vec); -#endif - -} - -/* The CPM can generate the error interrupt when there is a race condition - * between generating and masking interrupts. All we have to do is ACK it - * and return. This is a no-op function so we don't need any special - * tests in the interrupt handler. - */ -static void -cpm_error_interrupt(void *dev) -{ -} - -/* Install a CPM interrupt handler. -*/ -void -cpm_install_handler(int vec, irq_handler_t handler, void *dev_id) -{ - - request_irq(vec, handler, 0, "timer", dev_id); - -/* if (cpm_vecs[vec].handler != 0) */ -/* printk(KERN_INFO "CPM interrupt %x replacing %x\n", */ -/* (uint)handler, (uint)cpm_vecs[vec].handler); */ -/* cpm_vecs[vec].handler = handler; */ -/* cpm_vecs[vec].dev_id = dev_id; */ - - /* ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr |= (1 << vec); */ -/* pquicc->intr_cimr |= (1 << vec); */ - -} - -/* Free a CPM interrupt handler. -*/ -void -cpm_free_handler(int vec) -{ - cpm_vecs[vec].handler = NULL; - cpm_vecs[vec].dev_id = NULL; - /* ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr &= ~(1 << vec); */ - pquicc->intr_cimr &= ~(1 << vec); -} - - - - -/* Allocate some memory from the dual ported ram. We may want to - * enforce alignment restrictions, but right now everyone is a good - * citizen. - */ -uint -m360_cpm_dpalloc(uint size) -{ - uint retloc; - - if ((dp_alloc_base + size) >= dp_alloc_top) - return(CPM_DP_NOSPACE); - - retloc = dp_alloc_base; - dp_alloc_base += size; - - return(retloc); -} - - -#if 0 /* mleslie - for now these are simply kmalloc'd */ -/* We also own one page of host buffer space for the allocation of - * UART "fifos" and the like. - */ -uint -m360_cpm_hostalloc(uint size) -{ - uint retloc; - - if ((host_buffer + size) >= host_end) - return(0); - - retloc = host_buffer; - host_buffer += size; - - return(retloc); -} -#endif - - -/* Set a baud rate generator. This needs lots of work. There are - * four BRGs, any of which can be wired to any channel. - * The internal baud rate clock is the system clock divided by 16. - * This assumes the baudrate is 16x oversampled by the uart. - */ -/* #define BRG_INT_CLK (((bd_t *)__res)->bi_intfreq * 1000000) */ -#define BRG_INT_CLK system_clock -#define BRG_UART_CLK (BRG_INT_CLK/16) - -void -m360_cpm_setbrg(uint brg, uint rate) -{ - volatile uint *bp; - - /* This is good enough to get SMCs running..... - */ - /* bp = (uint *)&cpmp->cp_brgc1; */ - bp = (volatile uint *)(&pquicc->brgc[0].l); - bp += brg; - *bp = ((BRG_UART_CLK / rate - 1) << 1) | CPM_BRG_EN; -} - - -/* - * Local variables: - * c-indent-level: 4 - * c-basic-offset: 4 - * tab-width: 4 - * End: - */ |