summaryrefslogtreecommitdiff
path: root/arch/x86/boot
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/boot')
-rw-r--r--arch/x86/boot/Makefile4
-rw-r--r--arch/x86/boot/compressed/eboot.c21
-rw-r--r--arch/x86/boot/compressed/head_32.S8
-rw-r--r--arch/x86/boot/compressed/head_64.S8
-rw-r--r--arch/x86/boot/header.S39
-rw-r--r--arch/x86/boot/setup.ld2
-rw-r--r--arch/x86/boot/tools/build.c81
7 files changed, 115 insertions, 48 deletions
diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile
index ccce0ed67dde..379814bc41e3 100644
--- a/arch/x86/boot/Makefile
+++ b/arch/x86/boot/Makefile
@@ -71,7 +71,7 @@ GCOV_PROFILE := n
$(obj)/bzImage: asflags-y := $(SVGA_MODE)
quiet_cmd_image = BUILD $@
-cmd_image = $(obj)/tools/build $(obj)/setup.bin $(obj)/vmlinux.bin > $@
+cmd_image = $(obj)/tools/build $(obj)/setup.bin $(obj)/vmlinux.bin $(obj)/zoffset.h > $@
$(obj)/bzImage: $(obj)/setup.bin $(obj)/vmlinux.bin $(obj)/tools/build FORCE
$(call if_changed,image)
@@ -92,7 +92,7 @@ targets += voffset.h
$(obj)/voffset.h: vmlinux FORCE
$(call if_changed,voffset)
-sed-zoffset := -e 's/^\([0-9a-fA-F]*\) . \(startup_32\|input_data\|_end\|z_.*\)$$/\#define ZO_\2 0x\1/p'
+sed-zoffset := -e 's/^\([0-9a-fA-F]*\) . \(startup_32\|startup_64\|efi_pe_entry\|efi_stub_entry\|input_data\|_end\|z_.*\)$$/\#define ZO_\2 0x\1/p'
quiet_cmd_zoffset = ZOFFSET $@
cmd_zoffset = $(NM) $< | sed -n $(sed-zoffset) > $@
diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c
index 18e329ca108e..f8fa41190c35 100644
--- a/arch/x86/boot/compressed/eboot.c
+++ b/arch/x86/boot/compressed/eboot.c
@@ -256,10 +256,10 @@ static efi_status_t setup_efi_pci(struct boot_params *params)
int i;
struct setup_data *data;
- data = (struct setup_data *)params->hdr.setup_data;
+ data = (struct setup_data *)(unsigned long)params->hdr.setup_data;
while (data && data->next)
- data = (struct setup_data *)data->next;
+ data = (struct setup_data *)(unsigned long)data->next;
status = efi_call_phys5(sys_table->boottime->locate_handle,
EFI_LOCATE_BY_PROTOCOL, &pci_proto,
@@ -295,16 +295,18 @@ static efi_status_t setup_efi_pci(struct boot_params *params)
if (!pci)
continue;
+#ifdef CONFIG_X86_64
status = efi_call_phys4(pci->attributes, pci,
EfiPciIoAttributeOperationGet, 0,
&attributes);
-
+#else
+ status = efi_call_phys5(pci->attributes, pci,
+ EfiPciIoAttributeOperationGet, 0, 0,
+ &attributes);
+#endif
if (status != EFI_SUCCESS)
continue;
- if (!(attributes & EFI_PCI_IO_ATTRIBUTE_EMBEDDED_ROM))
- continue;
-
if (!pci->romimage || !pci->romsize)
continue;
@@ -345,9 +347,9 @@ static efi_status_t setup_efi_pci(struct boot_params *params)
memcpy(rom->romdata, pci->romimage, pci->romsize);
if (data)
- data->next = (uint64_t)rom;
+ data->next = (unsigned long)rom;
else
- params->hdr.setup_data = (uint64_t)rom;
+ params->hdr.setup_data = (unsigned long)rom;
data = (struct setup_data *)rom;
@@ -432,10 +434,9 @@ static efi_status_t setup_gop(struct screen_info *si, efi_guid_t *proto,
* Once we've found a GOP supporting ConOut,
* don't bother looking any further.
*/
+ first_gop = gop;
if (conout_found)
break;
-
- first_gop = gop;
}
}
diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S
index aa4aaf1b2380..1e3184f6072f 100644
--- a/arch/x86/boot/compressed/head_32.S
+++ b/arch/x86/boot/compressed/head_32.S
@@ -35,11 +35,11 @@ ENTRY(startup_32)
#ifdef CONFIG_EFI_STUB
jmp preferred_addr
- .balign 0x10
/*
* We don't need the return address, so set up the stack so
- * efi_main() can find its arugments.
+ * efi_main() can find its arguments.
*/
+ENTRY(efi_pe_entry)
add $0x4, %esp
call make_boot_params
@@ -50,8 +50,10 @@ ENTRY(startup_32)
pushl %eax
pushl %esi
pushl %ecx
+ sub $0x4, %esp
- .org 0x30,0x90
+ENTRY(efi_stub_entry)
+ add $0x4, %esp
call efi_main
cmpl $0, %eax
movl %eax, %esi
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index 2c4b171eec33..f5d1aaa0dec8 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -201,12 +201,12 @@ ENTRY(startup_64)
*/
#ifdef CONFIG_EFI_STUB
/*
- * The entry point for the PE/COFF executable is 0x210, so only
- * legacy boot loaders will execute this jmp.
+ * The entry point for the PE/COFF executable is efi_pe_entry, so
+ * only legacy boot loaders will execute this jmp.
*/
jmp preferred_addr
- .org 0x210
+ENTRY(efi_pe_entry)
mov %rcx, %rdi
mov %rdx, %rsi
pushq %rdi
@@ -218,7 +218,7 @@ ENTRY(startup_64)
popq %rsi
popq %rdi
- .org 0x230,0x90
+ENTRY(efi_stub_entry)
call efi_main
movq %rax,%rsi
cmpq $0,%rax
diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S
index 8c132a625b94..944ce595f767 100644
--- a/arch/x86/boot/header.S
+++ b/arch/x86/boot/header.S
@@ -21,6 +21,7 @@
#include <asm/e820.h>
#include <asm/page_types.h>
#include <asm/setup.h>
+#include <asm/bootparam.h>
#include "boot.h"
#include "voffset.h"
#include "zoffset.h"
@@ -255,6 +256,9 @@ section_table:
# header, from the old boot sector.
.section ".header", "a"
+ .globl sentinel
+sentinel: .byte 0xff, 0xff /* Used to detect broken loaders */
+
.globl hdr
hdr:
setup_sects: .byte 0 /* Filled in by build.c */
@@ -279,7 +283,7 @@ _start:
# Part 2 of the header, from the old setup.S
.ascii "HdrS" # header signature
- .word 0x020b # header version number (>= 0x0105)
+ .word 0x020c # header version number (>= 0x0105)
# or else old loadlin-1.5 will fail)
.globl realmode_swtch
realmode_swtch: .word 0, 0 # default_switch, SETUPSEG
@@ -297,13 +301,7 @@ type_of_loader: .byte 0 # 0 means ancient bootloader, newer
# flags, unused bits must be zero (RFU) bit within loadflags
loadflags:
-LOADED_HIGH = 1 # If set, the kernel is loaded high
-CAN_USE_HEAP = 0x80 # If set, the loader also has set
- # heap_end_ptr to tell how much
- # space behind setup.S can be used for
- # heap purposes.
- # Only the loader knows what is free
- .byte LOADED_HIGH
+ .byte LOADED_HIGH # The kernel is to be loaded high
setup_move_size: .word 0x8000 # size to move, when setup is not
# loaded at 0x90000. We will move setup
@@ -369,7 +367,23 @@ relocatable_kernel: .byte 1
relocatable_kernel: .byte 0
#endif
min_alignment: .byte MIN_KERNEL_ALIGN_LG2 # minimum alignment
-pad3: .word 0
+
+xloadflags:
+#ifdef CONFIG_X86_64
+# define XLF0 XLF_KERNEL_64 /* 64-bit kernel */
+#else
+# define XLF0 0
+#endif
+#ifdef CONFIG_EFI_STUB
+# ifdef CONFIG_X86_64
+# define XLF23 XLF_EFI_HANDOVER_64 /* 64-bit EFI handover ok */
+# else
+# define XLF23 XLF_EFI_HANDOVER_32 /* 32-bit EFI handover ok */
+# endif
+#else
+# define XLF23 0
+#endif
+ .word XLF0 | XLF23
cmdline_size: .long COMMAND_LINE_SIZE-1 #length of the command line,
#added with boot protocol
@@ -397,8 +411,13 @@ pref_address: .quad LOAD_PHYSICAL_ADDR # preferred load addr
#define INIT_SIZE VO_INIT_SIZE
#endif
init_size: .long INIT_SIZE # kernel initialization size
-handover_offset: .long 0x30 # offset to the handover
+handover_offset:
+#ifdef CONFIG_EFI_STUB
+ .long 0x30 # offset to the handover
# protocol entry point
+#else
+ .long 0
+#endif
# End of setup header #####################################################
diff --git a/arch/x86/boot/setup.ld b/arch/x86/boot/setup.ld
index 03c0683636b6..96a6c7563538 100644
--- a/arch/x86/boot/setup.ld
+++ b/arch/x86/boot/setup.ld
@@ -13,7 +13,7 @@ SECTIONS
.bstext : { *(.bstext) }
.bsdata : { *(.bsdata) }
- . = 497;
+ . = 495;
.header : { *(.header) }
.entrytext : { *(.entrytext) }
.inittext : { *(.inittext) }
diff --git a/arch/x86/boot/tools/build.c b/arch/x86/boot/tools/build.c
index 4b8e165ee572..94c544650020 100644
--- a/arch/x86/boot/tools/build.c
+++ b/arch/x86/boot/tools/build.c
@@ -52,6 +52,10 @@ int is_big_kernel;
#define PECOFF_RELOC_RESERVE 0x20
+unsigned long efi_stub_entry;
+unsigned long efi_pe_entry;
+unsigned long startup_64;
+
/*----------------------------------------------------------------------*/
static const u32 crctab32[] = {
@@ -132,7 +136,7 @@ static void die(const char * str, ...)
static void usage(void)
{
- die("Usage: build setup system [> image]");
+ die("Usage: build setup system [zoffset.h] [> image]");
}
#ifdef CONFIG_EFI_STUB
@@ -206,30 +210,54 @@ static void update_pecoff_text(unsigned int text_start, unsigned int file_sz)
*/
put_unaligned_le32(file_sz - 512, &buf[pe_header + 0x1c]);
-#ifdef CONFIG_X86_32
/*
- * Address of entry point.
- *
- * The EFI stub entry point is +16 bytes from the start of
- * the .text section.
+ * Address of entry point for PE/COFF executable
*/
- put_unaligned_le32(text_start + 16, &buf[pe_header + 0x28]);
-#else
- /*
- * Address of entry point. startup_32 is at the beginning and
- * the 64-bit entry point (startup_64) is always 512 bytes
- * after. The EFI stub entry point is 16 bytes after that, as
- * the first instruction allows legacy loaders to jump over
- * the EFI stub initialisation
- */
- put_unaligned_le32(text_start + 528, &buf[pe_header + 0x28]);
-#endif /* CONFIG_X86_32 */
+ put_unaligned_le32(text_start + efi_pe_entry, &buf[pe_header + 0x28]);
update_pecoff_section_header(".text", text_start, text_sz);
}
#endif /* CONFIG_EFI_STUB */
+
+/*
+ * Parse zoffset.h and find the entry points. We could just #include zoffset.h
+ * but that would mean tools/build would have to be rebuilt every time. It's
+ * not as if parsing it is hard...
+ */
+#define PARSE_ZOFS(p, sym) do { \
+ if (!strncmp(p, "#define ZO_" #sym " ", 11+sizeof(#sym))) \
+ sym = strtoul(p + 11 + sizeof(#sym), NULL, 16); \
+} while (0)
+
+static void parse_zoffset(char *fname)
+{
+ FILE *file;
+ char *p;
+ int c;
+
+ file = fopen(fname, "r");
+ if (!file)
+ die("Unable to open `%s': %m", fname);
+ c = fread(buf, 1, sizeof(buf) - 1, file);
+ if (ferror(file))
+ die("read-error on `zoffset.h'");
+ buf[c] = 0;
+
+ p = (char *)buf;
+
+ while (p && *p) {
+ PARSE_ZOFS(p, efi_stub_entry);
+ PARSE_ZOFS(p, efi_pe_entry);
+ PARSE_ZOFS(p, startup_64);
+
+ p = strchr(p, '\n');
+ while (p && (*p == '\r' || *p == '\n'))
+ p++;
+ }
+}
+
int main(int argc, char ** argv)
{
unsigned int i, sz, setup_sectors;
@@ -241,7 +269,19 @@ int main(int argc, char ** argv)
void *kernel;
u32 crc = 0xffffffffUL;
- if (argc != 3)
+ /* Defaults for old kernel */
+#ifdef CONFIG_X86_32
+ efi_pe_entry = 0x10;
+ efi_stub_entry = 0x30;
+#else
+ efi_pe_entry = 0x210;
+ efi_stub_entry = 0x230;
+ startup_64 = 0x200;
+#endif
+
+ if (argc == 4)
+ parse_zoffset(argv[3]);
+ else if (argc != 3)
usage();
/* Copy the setup code */
@@ -299,6 +339,11 @@ int main(int argc, char ** argv)
#ifdef CONFIG_EFI_STUB
update_pecoff_text(setup_sectors * 512, sz + i + ((sys_size * 16) - sz));
+
+#ifdef CONFIG_X86_64 /* Yes, this is really how we defined it :( */
+ efi_stub_entry -= 0x200;
+#endif
+ put_unaligned_le32(efi_stub_entry, &buf[0x264]);
#endif
crc = partial_crc32(buf, i, crc);