summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/configs/omap1_defconfig1
-rw-r--r--arch/arm/mach-omap1/Kconfig8
-rw-r--r--arch/arm/mach-omap1/clock.h3
-rw-r--r--arch/arm/mach-omap1/clock_data.c53
-rw-r--r--arch/arm/mach-omap1/devices.c3
5 files changed, 39 insertions, 29 deletions
diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig
index 7b63462b349d..a7e777581378 100644
--- a/arch/arm/configs/omap1_defconfig
+++ b/arch/arm/configs/omap1_defconfig
@@ -48,7 +48,6 @@ CONFIG_MACH_SX1=y
CONFIG_MACH_NOKIA770=y
CONFIG_MACH_AMS_DELTA=y
CONFIG_MACH_OMAP_GENERIC=y
-CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
CONFIG_OMAP_ARM_216MHZ=y
CONFIG_OMAP_ARM_195MHZ=y
CONFIG_OMAP_ARM_192MHZ=y
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index e0a028161dde..73f287d6429b 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -171,14 +171,6 @@ config MACH_OMAP_GENERIC
comment "OMAP CPU Speed"
depends on ARCH_OMAP1
-config OMAP_CLOCKS_SET_BY_BOOTLOADER
- bool "OMAP clocks set by bootloader"
- depends on ARCH_OMAP1
- help
- Enable this option to prevent the kernel from overriding the clock
- frequencies programmed by bootloader for MPU, DSP, MMUs, TC,
- internal LCD controller and MPU peripherals.
-
config OMAP_ARM_216MHZ
bool "OMAP ARM 216 MHz CPU (1710 only)"
depends on ARCH_OMAP1 && ARCH_OMAP16XX
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
index eaf09efb91ca..16b1423b454a 100644
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -17,7 +17,8 @@
#include <plat/clock.h>
-extern int __init omap1_clk_init(void);
+int omap1_clk_init(void);
+void omap1_clk_late_init(void);
extern int omap1_clk_enable(struct clk *clk);
extern void omap1_clk_disable(struct clk *clk);
extern long omap1_clk_round_rate(struct clk *clk, unsigned long rate);
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index 92400b9eb69f..1297bb58869c 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -767,6 +767,15 @@ static struct clk_functions omap1_clk_functions = {
.clk_disable_unused = omap1_clk_disable_unused,
};
+static void __init omap1_show_rates(void)
+{
+ pr_notice("Clocking rate (xtal/DPLL1/MPU): "
+ "%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
+ ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
+ ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
+ arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
+}
+
int __init omap1_clk_init(void)
{
struct omap_clk *c;
@@ -835,9 +844,12 @@ int __init omap1_clk_init(void)
/* We want to be in syncronous scalable mode */
omap_writew(0x1000, ARM_SYSST);
-#ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER
- /* Use values set by bootloader. Determine PLL rate and recalculate
- * dependent clocks as if kernel had changed PLL or divisors.
+
+ /*
+ * Initially use the values set by bootloader. Determine PLL rate and
+ * recalculate dependent clocks as if kernel had changed PLL or
+ * divisors. See also omap1_clk_late_init() that can reprogram dpll1
+ * after the SRAM is initialized.
*/
{
unsigned pll_ctl_val = omap_readw(DPLL_CTL);
@@ -862,25 +874,10 @@ int __init omap1_clk_init(void)
}
}
}
-#else
- /* Find the highest supported frequency and enable it */
- if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
- printk(KERN_ERR "System frequencies not set. Check your config.\n");
- /* Guess sane values (60MHz) */
- omap_writew(0x2290, DPLL_CTL);
- omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL);
- ck_dpll1.rate = 60000000;
- }
-#endif
propagate_rate(&ck_dpll1);
/* Cache rates for clocks connected to ck_ref (not dpll1) */
propagate_rate(&ck_ref);
- printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): "
- "%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
- ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
- ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
- arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
-
+ omap1_show_rates();
if (machine_is_omap_perseus2() || machine_is_omap_fsample()) {
/* Select slicer output as OMAP input clock */
omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1,
@@ -925,3 +922,21 @@ int __init omap1_clk_init(void)
return 0;
}
+
+#define OMAP1_DPLL1_SANE_VALUE 60000000
+
+void __init omap1_clk_late_init(void)
+{
+ if (ck_dpll1.rate >= OMAP1_DPLL1_SANE_VALUE)
+ return;
+
+ /* Find the highest supported frequency and enable it */
+ if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
+ pr_err("System frequencies not set, using default. Check your config.\n");
+ omap_writew(0x2290, DPLL_CTL);
+ omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL);
+ ck_dpll1.rate = OMAP1_DPLL1_SANE_VALUE;
+ }
+ propagate_rate(&ck_dpll1);
+ omap1_show_rates();
+}
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 48ef9888e820..475cb2f50d87 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -30,6 +30,8 @@
#include <plat/omap7xx.h>
#include <plat/mcbsp.h>
+#include "clock.h"
+
/*-------------------------------------------------------------------------*/
#if defined(CONFIG_RTC_DRV_OMAP) || defined(CONFIG_RTC_DRV_OMAP_MODULE)
@@ -293,6 +295,7 @@ static int __init omap1_init_devices(void)
return -ENODEV;
omap_sram_init();
+ omap1_clk_late_init();
/* please keep these calls, and their implementations above,
* in alphabetical order so they're easier to sort through.