summaryrefslogtreecommitdiff
path: root/drivers/clocksource
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/clocksource')
-rw-r--r--drivers/clocksource/hyperv_timer.c139
1 files changed, 139 insertions, 0 deletions
diff --git a/drivers/clocksource/hyperv_timer.c b/drivers/clocksource/hyperv_timer.c
index 68a28af31561..ba2c79e6a0ee 100644
--- a/drivers/clocksource/hyperv_timer.c
+++ b/drivers/clocksource/hyperv_timer.c
@@ -14,6 +14,8 @@
#include <linux/percpu.h>
#include <linux/cpumask.h>
#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/sched_clock.h>
#include <linux/mm.h>
#include <clocksource/hyperv_timer.h>
#include <asm/hyperv-tlfs.h>
@@ -198,3 +200,140 @@ void hv_stimer_global_cleanup(void)
hv_stimer_free();
}
EXPORT_SYMBOL_GPL(hv_stimer_global_cleanup);
+
+/*
+ * Code and definitions for the Hyper-V clocksources. Two
+ * clocksources are defined: one that reads the Hyper-V defined MSR, and
+ * the other that uses the TSC reference page feature as defined in the
+ * TLFS. The MSR version is for compatibility with old versions of
+ * Hyper-V and 32-bit x86. The TSC reference page version is preferred.
+ */
+
+struct clocksource *hyperv_cs;
+EXPORT_SYMBOL_GPL(hyperv_cs);
+
+#ifdef CONFIG_HYPERV_TSCPAGE
+
+static struct ms_hyperv_tsc_page *tsc_pg;
+
+struct ms_hyperv_tsc_page *hv_get_tsc_page(void)
+{
+ return tsc_pg;
+}
+EXPORT_SYMBOL_GPL(hv_get_tsc_page);
+
+static u64 notrace read_hv_sched_clock_tsc(void)
+{
+ u64 current_tick = hv_read_tsc_page(tsc_pg);
+
+ if (current_tick == U64_MAX)
+ hv_get_time_ref_count(current_tick);
+
+ return current_tick;
+}
+
+static u64 read_hv_clock_tsc(struct clocksource *arg)
+{
+ return read_hv_sched_clock_tsc();
+}
+
+static struct clocksource hyperv_cs_tsc = {
+ .name = "hyperv_clocksource_tsc_page",
+ .rating = 400,
+ .read = read_hv_clock_tsc,
+ .mask = CLOCKSOURCE_MASK(64),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+#endif
+
+static u64 notrace read_hv_sched_clock_msr(void)
+{
+ u64 current_tick;
+ /*
+ * Read the partition counter to get the current tick count. This count
+ * is set to 0 when the partition is created and is incremented in
+ * 100 nanosecond units.
+ */
+ hv_get_time_ref_count(current_tick);
+ return current_tick;
+}
+
+static u64 read_hv_clock_msr(struct clocksource *arg)
+{
+ return read_hv_sched_clock_msr();
+}
+
+static struct clocksource hyperv_cs_msr = {
+ .name = "hyperv_clocksource_msr",
+ .rating = 400,
+ .read = read_hv_clock_msr,
+ .mask = CLOCKSOURCE_MASK(64),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+#ifdef CONFIG_HYPERV_TSCPAGE
+static bool __init hv_init_tsc_clocksource(void)
+{
+ u64 tsc_msr;
+ phys_addr_t phys_addr;
+
+ if (!(ms_hyperv.features & HV_MSR_REFERENCE_TSC_AVAILABLE))
+ return false;
+
+ tsc_pg = vmalloc(PAGE_SIZE);
+ if (!tsc_pg)
+ return false;
+
+ hyperv_cs = &hyperv_cs_tsc;
+ phys_addr = page_to_phys(vmalloc_to_page(tsc_pg));
+
+ /*
+ * The Hyper-V TLFS specifies to preserve the value of reserved
+ * bits in registers. So read the existing value, preserve the
+ * low order 12 bits, and add in the guest physical address
+ * (which already has at least the low 12 bits set to zero since
+ * it is page aligned). Also set the "enable" bit, which is bit 0.
+ */
+ hv_get_reference_tsc(tsc_msr);
+ tsc_msr &= GENMASK_ULL(11, 0);
+ tsc_msr = tsc_msr | 0x1 | (u64)phys_addr;
+ hv_set_reference_tsc(tsc_msr);
+
+ hv_set_clocksource_vdso(hyperv_cs_tsc);
+ clocksource_register_hz(&hyperv_cs_tsc, NSEC_PER_SEC/100);
+
+ /* sched_clock_register is needed on ARM64 but is a no-op on x86 */
+ sched_clock_register(read_hv_sched_clock_tsc, 64, HV_CLOCK_HZ);
+ return true;
+}
+#else
+static bool __init hv_init_tsc_clocksource(void)
+{
+ return false;
+}
+#endif
+
+
+void __init hv_init_clocksource(void)
+{
+ /*
+ * Try to set up the TSC page clocksource. If it succeeds, we're
+ * done. Otherwise, set up the MSR clocksoruce. At least one of
+ * these will always be available except on very old versions of
+ * Hyper-V on x86. In that case we won't have a Hyper-V
+ * clocksource, but Linux will still run with a clocksource based
+ * on the emulated PIT or LAPIC timer.
+ */
+ if (hv_init_tsc_clocksource())
+ return;
+
+ if (!(ms_hyperv.features & HV_MSR_TIME_REF_COUNT_AVAILABLE))
+ return;
+
+ hyperv_cs = &hyperv_cs_msr;
+ clocksource_register_hz(&hyperv_cs_msr, NSEC_PER_SEC/100);
+
+ /* sched_clock_register is needed on ARM64 but is a no-op on x86 */
+ sched_clock_register(read_hv_sched_clock_msr, 64, HV_CLOCK_HZ);
+}
+EXPORT_SYMBOL_GPL(hv_init_clocksource);