summaryrefslogtreecommitdiff
path: root/drivers/hwmon/pmbus/pmbus.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hwmon/pmbus/pmbus.h')
-rw-r--r--drivers/hwmon/pmbus/pmbus.h23
1 files changed, 20 insertions, 3 deletions
diff --git a/drivers/hwmon/pmbus/pmbus.h b/drivers/hwmon/pmbus/pmbus.h
index a6ae20ffef6b..5d31d1c2c0f5 100644
--- a/drivers/hwmon/pmbus/pmbus.h
+++ b/drivers/hwmon/pmbus/pmbus.h
@@ -134,8 +134,16 @@
* Semantics:
* Virtual registers are all word size.
* READ registers are read-only; writes are either ignored or return an error.
- * RESET registers are read/write. Reading returns zero (used for detection),
- * writing any value causes the associated history to be reset.
+ * RESET registers are read/write. Reading reset registers returns zero
+ * (used for detection), writing any value causes the associated history to be
+ * reset.
+ * Virtual registers have to be handled in device specific driver code. Chip
+ * driver code returns non-negative register values if a virtual register is
+ * supported, or a negative error code if not. The chip driver may return
+ * -ENODATA or any other error code in this case, though an error code other
+ * than -ENODATA is handled more efficiently and thus preferred. Either case,
+ * the calling PMBus core code will abort if the chip driver returns an error
+ * code when reading or writing virtual registers.
*/
#define PMBUS_VIRT_BASE 0x100
#define PMBUS_VIRT_READ_TEMP_MIN (PMBUS_VIRT_BASE + 0)
@@ -160,6 +168,9 @@
#define PMBUS_VIRT_READ_IOUT_MIN (PMBUS_VIRT_BASE + 19)
#define PMBUS_VIRT_READ_IOUT_MAX (PMBUS_VIRT_BASE + 20)
#define PMBUS_VIRT_RESET_IOUT_HISTORY (PMBUS_VIRT_BASE + 21)
+#define PMBUS_VIRT_READ_TEMP2_MIN (PMBUS_VIRT_BASE + 22)
+#define PMBUS_VIRT_READ_TEMP2_MAX (PMBUS_VIRT_BASE + 23)
+#define PMBUS_VIRT_RESET_TEMP2_HISTORY (PMBUS_VIRT_BASE + 24)
/*
* CAPABILITY
@@ -320,6 +331,12 @@ struct pmbus_driver_info {
* The following functions map manufacturing specific register values
* to PMBus standard register values. Specify only if mapping is
* necessary.
+ * Functions return the register value (read) or zero (write) if
+ * successful. A return value of -ENODATA indicates that there is no
+ * manufacturer specific register, but that a standard PMBus register
+ * may exist. Any other negative return value indicates that the
+ * register does not exist, and that no attempt should be made to read
+ * the standard register.
*/
int (*read_byte_data)(struct i2c_client *client, int page, int reg);
int (*read_word_data)(struct i2c_client *client, int page, int reg);
@@ -347,7 +364,7 @@ bool pmbus_check_byte_register(struct i2c_client *client, int page, int reg);
bool pmbus_check_word_register(struct i2c_client *client, int page, int reg);
int pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id,
struct pmbus_driver_info *info);
-int pmbus_do_remove(struct i2c_client *client);
+void pmbus_do_remove(struct i2c_client *client);
const struct pmbus_driver_info *pmbus_get_driver_info(struct i2c_client
*client);