summaryrefslogtreecommitdiff
path: root/drivers/input
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/input')
-rw-r--r--drivers/input/misc/Kconfig10
-rw-r--r--drivers/input/misc/Makefile1
-rw-r--r--drivers/input/misc/mpu3050.c481
3 files changed, 0 insertions, 492 deletions
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 1ae4d9617ff8..5b6c52210d20 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -234,16 +234,6 @@ config INPUT_MMA8450
To compile this driver as a module, choose M here: the
module will be called mma8450.
-config INPUT_MPU3050
- tristate "MPU3050 Triaxial gyroscope sensor"
- depends on I2C
- help
- Say Y here if you want to support InvenSense MPU3050
- connected via an I2C bus.
-
- To compile this driver as a module, choose M here: the
- module will be called mpu3050.
-
config INPUT_APANEL
tristate "Fujitsu Lifebook Application Panel buttons"
depends on X86 && I2C && LEDS_CLASS
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 0b6d025f0487..b10523f2878e 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -48,7 +48,6 @@ obj-$(CONFIG_INPUT_MAX8925_ONKEY) += max8925_onkey.o
obj-$(CONFIG_INPUT_MAX8997_HAPTIC) += max8997_haptic.o
obj-$(CONFIG_INPUT_MC13783_PWRBUTTON) += mc13783-pwrbutton.o
obj-$(CONFIG_INPUT_MMA8450) += mma8450.o
-obj-$(CONFIG_INPUT_MPU3050) += mpu3050.o
obj-$(CONFIG_INPUT_PALMAS_PWRBUTTON) += palmas-pwrbutton.o
obj-$(CONFIG_INPUT_PCAP) += pcap_keys.o
obj-$(CONFIG_INPUT_PCF50633_PMU) += pcf50633-input.o
diff --git a/drivers/input/misc/mpu3050.c b/drivers/input/misc/mpu3050.c
deleted file mode 100644
index f088db31cfc7..000000000000
--- a/drivers/input/misc/mpu3050.c
+++ /dev/null
@@ -1,481 +0,0 @@
-/*
- * MPU3050 Tri-axis gyroscope driver
- *
- * Copyright (C) 2011 Wistron Co.Ltd
- * Joseph Lai <joseph_lai@wistron.com>
- *
- * Trimmed down by Alan Cox <alan@linux.intel.com> to produce this version
- *
- * This is a 'lite' version of the driver, while we consider the right way
- * to present the other features to user space. In particular it requires the
- * device has an IRQ, and it only provides an input interface, so is not much
- * use for device orientation. A fuller version is available from the Meego
- * tree.
- *
- * This program is based on bma023.c.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- *
- */
-
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/mutex.h>
-#include <linux/err.h>
-#include <linux/i2c.h>
-#include <linux/input.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/pm_runtime.h>
-
-#define MPU3050_CHIP_ID 0x69
-
-#define MPU3050_AUTO_DELAY 1000
-
-#define MPU3050_MIN_VALUE -32768
-#define MPU3050_MAX_VALUE 32767
-
-#define MPU3050_DEFAULT_POLL_INTERVAL 200
-#define MPU3050_DEFAULT_FS_RANGE 3
-
-/* Register map */
-#define MPU3050_CHIP_ID_REG 0x00
-#define MPU3050_SMPLRT_DIV 0x15
-#define MPU3050_DLPF_FS_SYNC 0x16
-#define MPU3050_INT_CFG 0x17
-#define MPU3050_XOUT_H 0x1D
-#define MPU3050_PWR_MGM 0x3E
-#define MPU3050_PWR_MGM_POS 6
-
-/* Register bits */
-
-/* DLPF_FS_SYNC */
-#define MPU3050_EXT_SYNC_NONE 0x00
-#define MPU3050_EXT_SYNC_TEMP 0x20
-#define MPU3050_EXT_SYNC_GYROX 0x40
-#define MPU3050_EXT_SYNC_GYROY 0x60
-#define MPU3050_EXT_SYNC_GYROZ 0x80
-#define MPU3050_EXT_SYNC_ACCELX 0xA0
-#define MPU3050_EXT_SYNC_ACCELY 0xC0
-#define MPU3050_EXT_SYNC_ACCELZ 0xE0
-#define MPU3050_EXT_SYNC_MASK 0xE0
-#define MPU3050_FS_250DPS 0x00
-#define MPU3050_FS_500DPS 0x08
-#define MPU3050_FS_1000DPS 0x10
-#define MPU3050_FS_2000DPS 0x18
-#define MPU3050_FS_MASK 0x18
-#define MPU3050_DLPF_CFG_256HZ_NOLPF2 0x00
-#define MPU3050_DLPF_CFG_188HZ 0x01
-#define MPU3050_DLPF_CFG_98HZ 0x02
-#define MPU3050_DLPF_CFG_42HZ 0x03
-#define MPU3050_DLPF_CFG_20HZ 0x04
-#define MPU3050_DLPF_CFG_10HZ 0x05
-#define MPU3050_DLPF_CFG_5HZ 0x06
-#define MPU3050_DLPF_CFG_2100HZ_NOLPF 0x07
-#define MPU3050_DLPF_CFG_MASK 0x07
-/* INT_CFG */
-#define MPU3050_RAW_RDY_EN 0x01
-#define MPU3050_MPU_RDY_EN 0x02
-#define MPU3050_LATCH_INT_EN 0x04
-/* PWR_MGM */
-#define MPU3050_PWR_MGM_PLL_X 0x01
-#define MPU3050_PWR_MGM_PLL_Y 0x02
-#define MPU3050_PWR_MGM_PLL_Z 0x03
-#define MPU3050_PWR_MGM_CLKSEL 0x07
-#define MPU3050_PWR_MGM_STBY_ZG 0x08
-#define MPU3050_PWR_MGM_STBY_YG 0x10
-#define MPU3050_PWR_MGM_STBY_XG 0x20
-#define MPU3050_PWR_MGM_SLEEP 0x40
-#define MPU3050_PWR_MGM_RESET 0x80
-#define MPU3050_PWR_MGM_MASK 0x40
-
-struct axis_data {
- s16 x;
- s16 y;
- s16 z;
-};
-
-struct mpu3050_sensor {
- struct i2c_client *client;
- struct device *dev;
- struct input_dev *idev;
-};
-
-/**
- * mpu3050_xyz_read_reg - read the axes values
- * @buffer: provide register addr and get register
- * @length: length of register
- *
- * Reads the register values in one transaction or returns a negative
- * error code on failure.
- */
-static int mpu3050_xyz_read_reg(struct i2c_client *client,
- u8 *buffer, int length)
-{
- /*
- * Annoying we can't make this const because the i2c layer doesn't
- * declare input buffers const.
- */
- char cmd = MPU3050_XOUT_H;
- struct i2c_msg msg[] = {
- {
- .addr = client->addr,
- .flags = 0,
- .len = 1,
- .buf = &cmd,
- },
- {
- .addr = client->addr,
- .flags = I2C_M_RD,
- .len = length,
- .buf = buffer,
- },
- };
-
- return i2c_transfer(client->adapter, msg, 2);
-}
-
-/**
- * mpu3050_read_xyz - get co-ordinates from device
- * @client: i2c address of sensor
- * @coords: co-ordinates to update
- *
- * Return the converted X Y and Z co-ordinates from the sensor device
- */
-static void mpu3050_read_xyz(struct i2c_client *client,
- struct axis_data *coords)
-{
- u16 buffer[3];
-
- mpu3050_xyz_read_reg(client, (u8 *)buffer, 6);
- coords->x = be16_to_cpu(buffer[0]);
- coords->y = be16_to_cpu(buffer[1]);
- coords->z = be16_to_cpu(buffer[2]);
- dev_dbg(&client->dev, "%s: x %d, y %d, z %d\n", __func__,
- coords->x, coords->y, coords->z);
-}
-
-/**
- * mpu3050_set_power_mode - set the power mode
- * @client: i2c client for the sensor
- * @val: value to switch on/off of power, 1: normal power, 0: low power
- *
- * Put device to normal-power mode or low-power mode.
- */
-static void mpu3050_set_power_mode(struct i2c_client *client, u8 val)
-{
- u8 value;
-
- value = i2c_smbus_read_byte_data(client, MPU3050_PWR_MGM);
- value = (value & ~MPU3050_PWR_MGM_MASK) |
- (((val << MPU3050_PWR_MGM_POS) & MPU3050_PWR_MGM_MASK) ^
- MPU3050_PWR_MGM_MASK);
- i2c_smbus_write_byte_data(client, MPU3050_PWR_MGM, value);
-}
-
-/**
- * mpu3050_input_open - called on input event open
- * @input: input dev of opened device
- *
- * The input layer calls this function when input event is opened. The
- * function will push the device to resume. Then, the device is ready
- * to provide data.
- */
-static int mpu3050_input_open(struct input_dev *input)
-{
- struct mpu3050_sensor *sensor = input_get_drvdata(input);
- int error;
-
- pm_runtime_get(sensor->dev);
-
- /* Enable interrupts */
- error = i2c_smbus_write_byte_data(sensor->client, MPU3050_INT_CFG,
- MPU3050_LATCH_INT_EN |
- MPU3050_RAW_RDY_EN |
- MPU3050_MPU_RDY_EN);
- if (error < 0) {
- pm_runtime_put(sensor->dev);
- return error;
- }
-
- return 0;
-}
-
-/**
- * mpu3050_input_close - called on input event close
- * @input: input dev of closed device
- *
- * The input layer calls this function when input event is closed. The
- * function will push the device to suspend.
- */
-static void mpu3050_input_close(struct input_dev *input)
-{
- struct mpu3050_sensor *sensor = input_get_drvdata(input);
-
- pm_runtime_put(sensor->dev);
-}
-
-/**
- * mpu3050_interrupt_thread - handle an IRQ
- * @irq: interrupt numner
- * @data: the sensor
- *
- * Called by the kernel single threaded after an interrupt occurs. Read
- * the sensor data and generate an input event for it.
- */
-static irqreturn_t mpu3050_interrupt_thread(int irq, void *data)
-{
- struct mpu3050_sensor *sensor = data;
- struct axis_data axis;
-
- mpu3050_read_xyz(sensor->client, &axis);
-
- input_report_abs(sensor->idev, ABS_X, axis.x);
- input_report_abs(sensor->idev, ABS_Y, axis.y);
- input_report_abs(sensor->idev, ABS_Z, axis.z);
- input_sync(sensor->idev);
-
- return IRQ_HANDLED;
-}
-
-/**
- * mpu3050_hw_init - initialize hardware
- * @sensor: the sensor
- *
- * Called during device probe; configures the sampling method.
- */
-static int mpu3050_hw_init(struct mpu3050_sensor *sensor)
-{
- struct i2c_client *client = sensor->client;
- int ret;
- u8 reg;
-
- /* Reset */
- ret = i2c_smbus_write_byte_data(client, MPU3050_PWR_MGM,
- MPU3050_PWR_MGM_RESET);
- if (ret < 0)
- return ret;
-
- ret = i2c_smbus_read_byte_data(client, MPU3050_PWR_MGM);
- if (ret < 0)
- return ret;
-
- ret &= ~MPU3050_PWR_MGM_CLKSEL;
- ret |= MPU3050_PWR_MGM_PLL_Z;
- ret = i2c_smbus_write_byte_data(client, MPU3050_PWR_MGM, ret);
- if (ret < 0)
- return ret;
-
- /* Output frequency divider. The poll interval */
- ret = i2c_smbus_write_byte_data(client, MPU3050_SMPLRT_DIV,
- MPU3050_DEFAULT_POLL_INTERVAL - 1);
- if (ret < 0)
- return ret;
-
- /* Set low pass filter and full scale */
- reg = MPU3050_DEFAULT_FS_RANGE;
- reg |= MPU3050_DLPF_CFG_42HZ << 3;
- reg |= MPU3050_EXT_SYNC_NONE << 5;
- ret = i2c_smbus_write_byte_data(client, MPU3050_DLPF_FS_SYNC, reg);
- if (ret < 0)
- return ret;
-
- return 0;
-}
-
-/**
- * mpu3050_probe - device detection callback
- * @client: i2c client of found device
- * @id: id match information
- *
- * The I2C layer calls us when it believes a sensor is present at this
- * address. Probe to see if this is correct and to validate the device.
- *
- * If present install the relevant sysfs interfaces and input device.
- */
-static int mpu3050_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
-{
- struct mpu3050_sensor *sensor;
- struct input_dev *idev;
- int ret;
- int error;
-
- sensor = kzalloc(sizeof(struct mpu3050_sensor), GFP_KERNEL);
- idev = input_allocate_device();
- if (!sensor || !idev) {
- dev_err(&client->dev, "failed to allocate driver data\n");
- error = -ENOMEM;
- goto err_free_mem;
- }
-
- sensor->client = client;
- sensor->dev = &client->dev;
- sensor->idev = idev;
-
- mpu3050_set_power_mode(client, 1);
- msleep(10);
-
- ret = i2c_smbus_read_byte_data(client, MPU3050_CHIP_ID_REG);
- if (ret < 0) {
- dev_err(&client->dev, "failed to detect device\n");
- error = -ENXIO;
- goto err_free_mem;
- }
-
- if (ret != MPU3050_CHIP_ID) {
- dev_err(&client->dev, "unsupported chip id\n");
- error = -ENXIO;
- goto err_free_mem;
- }
-
- idev->name = "MPU3050";
- idev->id.bustype = BUS_I2C;
- idev->dev.parent = &client->dev;
-
- idev->open = mpu3050_input_open;
- idev->close = mpu3050_input_close;
-
- __set_bit(EV_ABS, idev->evbit);
- input_set_abs_params(idev, ABS_X,
- MPU3050_MIN_VALUE, MPU3050_MAX_VALUE, 0, 0);
- input_set_abs_params(idev, ABS_Y,
- MPU3050_MIN_VALUE, MPU3050_MAX_VALUE, 0, 0);
- input_set_abs_params(idev, ABS_Z,
- MPU3050_MIN_VALUE, MPU3050_MAX_VALUE, 0, 0);
-
- input_set_drvdata(idev, sensor);
-
- pm_runtime_set_active(&client->dev);
-
- error = mpu3050_hw_init(sensor);
- if (error)
- goto err_pm_set_suspended;
-
- error = request_threaded_irq(client->irq,
- NULL, mpu3050_interrupt_thread,
- IRQF_TRIGGER_RISING | IRQF_ONESHOT,
- "mpu3050", sensor);
- if (error) {
- dev_err(&client->dev,
- "can't get IRQ %d, error %d\n", client->irq, error);
- goto err_pm_set_suspended;
- }
-
- error = input_register_device(idev);
- if (error) {
- dev_err(&client->dev, "failed to register input device\n");
- goto err_free_irq;
- }
-
- pm_runtime_enable(&client->dev);
- pm_runtime_set_autosuspend_delay(&client->dev, MPU3050_AUTO_DELAY);
- i2c_set_clientdata(client, sensor);
-
- return 0;
-
-err_free_irq:
- free_irq(client->irq, sensor);
-err_pm_set_suspended:
- pm_runtime_set_suspended(&client->dev);
-err_free_mem:
- input_free_device(idev);
- kfree(sensor);
- return error;
-}
-
-/**
- * mpu3050_remove - remove a sensor
- * @client: i2c client of sensor being removed
- *
- * Our sensor is going away, clean up the resources.
- */
-static int mpu3050_remove(struct i2c_client *client)
-{
- struct mpu3050_sensor *sensor = i2c_get_clientdata(client);
-
- pm_runtime_disable(&client->dev);
- pm_runtime_set_suspended(&client->dev);
-
- free_irq(client->irq, sensor);
- input_unregister_device(sensor->idev);
- kfree(sensor);
-
- return 0;
-}
-
-#ifdef CONFIG_PM
-/**
- * mpu3050_suspend - called on device suspend
- * @dev: device being suspended
- *
- * Put the device into sleep mode before we suspend the machine.
- */
-static int mpu3050_suspend(struct device *dev)
-{
- struct i2c_client *client = to_i2c_client(dev);
-
- mpu3050_set_power_mode(client, 0);
-
- return 0;
-}
-
-/**
- * mpu3050_resume - called on device resume
- * @dev: device being resumed
- *
- * Put the device into powered mode on resume.
- */
-static int mpu3050_resume(struct device *dev)
-{
- struct i2c_client *client = to_i2c_client(dev);
-
- mpu3050_set_power_mode(client, 1);
- msleep(100); /* wait for gyro chip resume */
-
- return 0;
-}
-#endif
-
-static UNIVERSAL_DEV_PM_OPS(mpu3050_pm, mpu3050_suspend, mpu3050_resume, NULL);
-
-static const struct i2c_device_id mpu3050_ids[] = {
- { "mpu3050", 0 },
- { }
-};
-MODULE_DEVICE_TABLE(i2c, mpu3050_ids);
-
-static const struct of_device_id mpu3050_of_match[] = {
- { .compatible = "invn,mpu3050", },
- { },
-};
-MODULE_DEVICE_TABLE(of, mpu3050_of_match);
-
-static struct i2c_driver mpu3050_i2c_driver = {
- .driver = {
- .name = "mpu3050",
- .pm = &mpu3050_pm,
- .of_match_table = mpu3050_of_match,
- },
- .probe = mpu3050_probe,
- .remove = mpu3050_remove,
- .id_table = mpu3050_ids,
-};
-
-module_i2c_driver(mpu3050_i2c_driver);
-
-MODULE_AUTHOR("Wistron Corp.");
-MODULE_DESCRIPTION("MPU3050 Tri-axis gyroscope driver");
-MODULE_LICENSE("GPL");