diff options
Diffstat (limited to 'drivers/input')
| -rw-r--r-- | drivers/input/joystick/xpad.c | 591 | ||||
| -rw-r--r-- | drivers/input/keyboard/gpio_keys.c | 6 | ||||
| -rw-r--r-- | drivers/input/touchscreen/atmel_mxt_ts.c | 68 |
3 files changed, 455 insertions, 210 deletions
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index fd4100d56d8c..6727954ab74b 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -76,10 +76,13 @@ */ #include <linux/kernel.h> +#include <linux/input.h> +#include <linux/rcupdate.h> #include <linux/slab.h> #include <linux/stat.h> #include <linux/module.h> #include <linux/usb/input.h> +#include <linux/usb/quirks.h> #define DRIVER_AUTHOR "Marko Friedemann <mfr@bmx-chemnitz.de>" #define DRIVER_DESC "X-Box pad driver" @@ -125,7 +128,7 @@ static const struct xpad_device { { 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", 0, XTYPE_XBOX }, { 0x045e, 0x028e, "Microsoft X-Box 360 pad", 0, XTYPE_XBOX360 }, { 0x045e, 0x02d1, "Microsoft X-Box One pad", 0, XTYPE_XBOXONE }, - { 0x045e, 0x02dd, "Microsoft X-Box One pad (Covert Forces)", 0, XTYPE_XBOXONE }, + { 0x045e, 0x02dd, "Microsoft X-Box One pad (Firmware 2015)", 0, XTYPE_XBOXONE }, { 0x045e, 0x0291, "Xbox 360 Wireless Receiver (XBOX)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W }, { 0x045e, 0x0719, "Xbox 360 Wireless Receiver", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W }, { 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX }, @@ -317,21 +320,42 @@ static struct usb_device_id xpad_table[] = { MODULE_DEVICE_TABLE(usb, xpad_table); +struct xpad_output_packet { + u8 data[XPAD_PKT_LEN]; + u8 len; + bool pending; +}; + +#define XPAD_OUT_CMD_IDX 0 +#define XPAD_OUT_FF_IDX 1 +#define XPAD_OUT_LED_IDX (1 + IS_ENABLED(CONFIG_JOYSTICK_XPAD_FF)) +#define XPAD_NUM_OUT_PACKETS (1 + \ + IS_ENABLED(CONFIG_JOYSTICK_XPAD_FF) + \ + IS_ENABLED(CONFIG_JOYSTICK_XPAD_LEDS)) + struct usb_xpad { struct input_dev *dev; /* input device interface */ + struct input_dev __rcu *x360w_dev; struct usb_device *udev; /* usb device */ struct usb_interface *intf; /* usb interface */ - int pad_present; + bool pad_present; + bool input_created; struct urb *irq_in; /* urb for interrupt in report */ unsigned char *idata; /* input data */ dma_addr_t idata_dma; struct urb *irq_out; /* urb for interrupt out report */ + struct usb_anchor irq_out_anchor; + bool irq_out_active; /* we must not use an active URB */ + u8 odata_serial; /* serial number for xbox one protocol */ unsigned char *odata; /* output data */ dma_addr_t odata_dma; - struct mutex odata_mutex; + spinlock_t odata_lock; + + struct xpad_output_packet out_packets[XPAD_NUM_OUT_PACKETS]; + int last_out_packet; #if defined(CONFIG_JOYSTICK_XPAD_LEDS) struct xpad_led *led; @@ -343,8 +367,12 @@ struct usb_xpad { int xtype; /* type of xbox device */ int pad_nr; /* the order x360 pads were attached */ const char *name; /* name of the device */ + struct work_struct work; /* init/remove device from callback */ }; +static int xpad_init_input(struct usb_xpad *xpad); +static void xpad_deinit_input(struct usb_xpad *xpad); + /* * xpad_process_packet * @@ -424,11 +452,9 @@ static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *d * http://www.free60.org/wiki/Gamepad */ -static void xpad360_process_packet(struct usb_xpad *xpad, +static void xpad360_process_packet(struct usb_xpad *xpad, struct input_dev *dev, u16 cmd, unsigned char *data) { - struct input_dev *dev = xpad->dev; - /* digital pad */ if (xpad->mapping & MAP_DPAD_TO_BUTTONS) { /* dpad as buttons (left, right, up, down) */ @@ -495,7 +521,30 @@ static void xpad360_process_packet(struct usb_xpad *xpad, input_sync(dev); } -static void xpad_identify_controller(struct usb_xpad *xpad); +static void xpad_presence_work(struct work_struct *work) +{ + struct usb_xpad *xpad = container_of(work, struct usb_xpad, work); + int error; + + if (xpad->pad_present) { + error = xpad_init_input(xpad); + if (error) { + /* complain only, not much else we can do here */ + dev_err(&xpad->dev->dev, + "unable to init device: %d\n", error); + } else { + rcu_assign_pointer(xpad->x360w_dev, xpad->dev); + } + } else { + RCU_INIT_POINTER(xpad->x360w_dev, NULL); + synchronize_rcu(); + /* + * Now that we are sure xpad360w_process_packet is not + * using input device we can get rid of it. + */ + xpad_deinit_input(xpad); + } +} /* * xpad360w_process_packet @@ -513,24 +562,28 @@ static void xpad_identify_controller(struct usb_xpad *xpad); */ static void xpad360w_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *data) { + struct input_dev *dev; + bool present; + /* Presence change */ if (data[0] & 0x08) { - if (data[1] & 0x80) { - xpad->pad_present = 1; - /* - * Light up the segment corresponding to - * controller number. - */ - xpad_identify_controller(xpad); - } else - xpad->pad_present = 0; + present = (data[1] & 0x80) != 0; + + if (xpad->pad_present != present) { + xpad->pad_present = present; + schedule_work(&xpad->work); + } } /* Valid pad data */ - if (!(data[1] & 0x1)) + if (data[1] != 0x1) return; - xpad360_process_packet(xpad, cmd, &data[4]); + rcu_read_lock(); + dev = rcu_dereference(xpad->x360w_dev); + if (dev) + xpad360_process_packet(xpad, dev, cmd, &data[4]); + rcu_read_unlock(); } /* @@ -659,7 +712,7 @@ static void xpad_irq_in(struct urb *urb) switch (xpad->xtype) { case XTYPE_XBOX360: - xpad360_process_packet(xpad, 0, xpad->idata); + xpad360_process_packet(xpad, xpad->dev, 0, xpad->idata); break; case XTYPE_XBOX360W: xpad360w_process_packet(xpad, 0, xpad->idata); @@ -678,18 +731,73 @@ exit: __func__, retval); } +/* Callers must hold xpad->odata_lock spinlock */ +static bool xpad_prepare_next_out_packet(struct usb_xpad *xpad) +{ + struct xpad_output_packet *pkt, *packet = NULL; + int i; + + for (i = 0; i < XPAD_NUM_OUT_PACKETS; i++) { + if (++xpad->last_out_packet >= XPAD_NUM_OUT_PACKETS) + xpad->last_out_packet = 0; + + pkt = &xpad->out_packets[xpad->last_out_packet]; + if (pkt->pending) { + dev_dbg(&xpad->intf->dev, + "%s - found pending output packet %d\n", + __func__, xpad->last_out_packet); + packet = pkt; + break; + } + } + + if (packet) { + memcpy(xpad->odata, packet->data, packet->len); + xpad->irq_out->transfer_buffer_length = packet->len; + return true; + } + + return false; +} + +/* Callers must hold xpad->odata_lock spinlock */ +static int xpad_try_sending_next_out_packet(struct usb_xpad *xpad) +{ + int error; + + if (!xpad->irq_out_active && xpad_prepare_next_out_packet(xpad)) { + usb_anchor_urb(xpad->irq_out, &xpad->irq_out_anchor); + error = usb_submit_urb(xpad->irq_out, GFP_ATOMIC); + if (error) { + dev_err(&xpad->intf->dev, + "%s - usb_submit_urb failed with result %d\n", + __func__, error); + usb_unanchor_urb(xpad->irq_out); + return -EIO; + } + + xpad->irq_out_active = true; + } + + return 0; +} + static void xpad_irq_out(struct urb *urb) { struct usb_xpad *xpad = urb->context; struct device *dev = &xpad->intf->dev; - int retval, status; + int status = urb->status; + int error; + unsigned long flags; - status = urb->status; + spin_lock_irqsave(&xpad->odata_lock, flags); switch (status) { case 0: /* success */ - return; + xpad->out_packets[xpad->last_out_packet].pending = false; + xpad->irq_out_active = xpad_prepare_next_out_packet(xpad); + break; case -ECONNRESET: case -ENOENT: @@ -697,19 +805,28 @@ static void xpad_irq_out(struct urb *urb) /* this urb is terminated, clean up */ dev_dbg(dev, "%s - urb shutting down with status: %d\n", __func__, status); - return; + xpad->irq_out_active = false; + break; default: dev_dbg(dev, "%s - nonzero urb status received: %d\n", __func__, status); - goto exit; + break; } -exit: - retval = usb_submit_urb(urb, GFP_ATOMIC); - if (retval) - dev_err(dev, "%s - usb_submit_urb failed with result %d\n", - __func__, retval); + if (xpad->irq_out_active) { + usb_anchor_urb(urb, &xpad->irq_out_anchor); + error = usb_submit_urb(urb, GFP_ATOMIC); + if (error) { + dev_err(dev, + "%s - usb_submit_urb failed with result %d\n", + __func__, error); + usb_unanchor_urb(urb); + xpad->irq_out_active = false; + } + } + + spin_unlock_irqrestore(&xpad->odata_lock, flags); } static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad) @@ -721,6 +838,8 @@ static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad) if (xpad->xtype == XTYPE_UNKNOWN) return 0; + init_usb_anchor(&xpad->irq_out_anchor); + xpad->odata = usb_alloc_coherent(xpad->udev, XPAD_PKT_LEN, GFP_KERNEL, &xpad->odata_dma); if (!xpad->odata) { @@ -728,7 +847,7 @@ static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad) goto fail1; } - mutex_init(&xpad->odata_mutex); + spin_lock_init(&xpad->odata_lock); xpad->irq_out = usb_alloc_urb(0, GFP_KERNEL); if (!xpad->irq_out) { @@ -755,8 +874,14 @@ static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad) static void xpad_stop_output(struct usb_xpad *xpad) { - if (xpad->xtype != XTYPE_UNKNOWN) - usb_kill_urb(xpad->irq_out); + if (xpad->xtype != XTYPE_UNKNOWN) { + if (!usb_wait_anchor_empty_timeout(&xpad->irq_out_anchor, + 5000)) { + dev_warn(&xpad->intf->dev, + "timed out waiting for output URB to complete, killing\n"); + usb_kill_anchored_urbs(&xpad->irq_out_anchor); + } + } } static void xpad_deinit_output(struct usb_xpad *xpad) @@ -770,27 +895,60 @@ static void xpad_deinit_output(struct usb_xpad *xpad) static int xpad_inquiry_pad_presence(struct usb_xpad *xpad) { + struct xpad_output_packet *packet = + &xpad->out_packets[XPAD_OUT_CMD_IDX]; + unsigned long flags; int retval; - mutex_lock(&xpad->odata_mutex); + spin_lock_irqsave(&xpad->odata_lock, flags); + + packet->data[0] = 0x08; + packet->data[1] = 0x00; + packet->data[2] = 0x0F; + packet->data[3] = 0xC0; + packet->data[4] = 0x00; + packet->data[5] = 0x00; + packet->data[6] = 0x00; + packet->data[7] = 0x00; + packet->data[8] = 0x00; + packet->data[9] = 0x00; + packet->data[10] = 0x00; + packet->data[11] = 0x00; + packet->len = 12; + packet->pending = true; + + /* Reset the sequence so we send out presence first */ + xpad->last_out_packet = -1; + retval = xpad_try_sending_next_out_packet(xpad); + + spin_unlock_irqrestore(&xpad->odata_lock, flags); - xpad->odata[0] = 0x08; - xpad->odata[1] = 0x00; - xpad->odata[2] = 0x0F; - xpad->odata[3] = 0xC0; - xpad->odata[4] = 0x00; - xpad->odata[5] = 0x00; - xpad->odata[6] = 0x00; - xpad->odata[7] = 0x00; - xpad->odata[8] = 0x00; - xpad->odata[9] = 0x00; - xpad->odata[10] = 0x00; - xpad->odata[11] = 0x00; - xpad->irq_out->transfer_buffer_length = 12; + return retval; +} + +static int xpad_start_xbox_one(struct usb_xpad *xpad) +{ + struct xpad_output_packet *packet = + &xpad->out_packets[XPAD_OUT_CMD_IDX]; + unsigned long flags; + int retval; - retval = usb_submit_urb(xpad->irq_out, GFP_KERNEL); + spin_lock_irqsave(&xpad->odata_lock, flags); - mutex_unlock(&xpad->odata_mutex); + /* Xbox one controller needs to be initialized. */ + packet->data[0] = 0x05; + packet->data[1] = 0x20; + packet->data[2] = xpad->odata_serial++; /* packet serial */ + packet->data[3] = 0x01; /* rumble bit enable? */ + packet->data[4] = 0x00; + packet->len = 5; + packet->pending = true; + + /* Reset the sequence so we send out start packet first */ + xpad->last_out_packet = -1; + retval = xpad_try_sending_next_out_packet(xpad); + + spin_unlock_irqrestore(&xpad->odata_lock, flags); return retval; } @@ -799,8 +957,11 @@ static int xpad_inquiry_pad_presence(struct usb_xpad *xpad) static int xpad_play_effect(struct input_dev *dev, void *data, struct ff_effect *effect) { struct usb_xpad *xpad = input_get_drvdata(dev); + struct xpad_output_packet *packet = &xpad->out_packets[XPAD_OUT_FF_IDX]; __u16 strong; __u16 weak; + int retval; + unsigned long flags; if (effect->type != FF_RUMBLE) return 0; @@ -808,69 +969,81 @@ static int xpad_play_effect(struct input_dev *dev, void *data, struct ff_effect strong = effect->u.rumble.strong_magnitude; weak = effect->u.rumble.weak_magnitude; + spin_lock_irqsave(&xpad->odata_lock, flags); + switch (xpad->xtype) { case XTYPE_XBOX: - xpad->odata[0] = 0x00; - xpad->odata[1] = 0x06; - xpad->odata[2] = 0x00; - xpad->odata[3] = strong / 256; /* left actuator */ - xpad->odata[4] = 0x00; - xpad->odata[5] = weak / 256; /* right actuator */ - xpad->irq_out->transfer_buffer_length = 6; + packet->data[0] = 0x00; + packet->data[1] = 0x06; + packet->data[2] = 0x00; + packet->data[3] = strong / 256; /* left actuator */ + packet->data[4] = 0x00; + packet->data[5] = weak / 256; /* right actuator */ + packet->len = 6; + packet->pending = true; break; case XTYPE_XBOX360: - xpad->odata[0] = 0x00; - xpad->odata[1] = 0x08; - xpad->odata[2] = 0x00; - xpad->odata[3] = strong / 256; /* left actuator? */ - xpad->odata[4] = weak / 256; /* right actuator? */ - xpad->odata[5] = 0x00; - xpad->odata[6] = 0x00; - xpad->odata[7] = 0x00; - xpad->irq_out->transfer_buffer_length = 8; + packet->data[0] = 0x00; + packet->data[1] = 0x08; + packet->data[2] = 0x00; + packet->data[3] = strong / 256; /* left actuator? */ + packet->data[4] = weak / 256; /* right actuator? */ + packet->data[5] = 0x00; + packet->data[6] = 0x00; + packet->data[7] = 0x00; + packet->len = 8; + packet->pending = true; break; case XTYPE_XBOX360W: - xpad->odata[0] = 0x00; - xpad->odata[1] = 0x01; - xpad->odata[2] = 0x0F; - xpad->odata[3] = 0xC0; - xpad->odata[4] = 0x00; - xpad->odata[5] = strong / 256; - xpad->odata[6] = weak / 256; - xpad->odata[7] = 0x00; - xpad->odata[8] = 0x00; - xpad->odata[9] = 0x00; - xpad->odata[10] = 0x00; - xpad->odata[11] = 0x00; - xpad->irq_out->transfer_buffer_length = 12; + packet->data[0] = 0x00; + packet->data[1] = 0x01; + packet->data[2] = 0x0F; + packet->data[3] = 0xC0; + packet->data[4] = 0x00; + packet->data[5] = strong / 256; + packet->data[6] = weak / 256; + packet->data[7] = 0x00; + packet->data[8] = 0x00; + packet->data[9] = 0x00; + packet->data[10] = 0x00; + packet->data[11] = 0x00; + packet->len = 12; + packet->pending = true; break; case XTYPE_XBOXONE: - xpad->odata[0] = 0x09; /* activate rumble */ - xpad->odata[1] = 0x08; - xpad->odata[2] = 0x00; - xpad->odata[3] = 0x08; /* continuous effect */ - xpad->odata[4] = 0x00; /* simple rumble mode */ - xpad->odata[5] = 0x03; /* L and R actuator only */ - xpad->odata[6] = 0x00; /* TODO: LT actuator */ - xpad->odata[7] = 0x00; /* TODO: RT actuator */ - xpad->odata[8] = strong / 256; /* left actuator */ - xpad->odata[9] = weak / 256; /* right actuator */ - xpad->odata[10] = 0x80; /* length of pulse */ - xpad->odata[11] = 0x00; /* stop period of pulse */ - xpad->irq_out->transfer_buffer_length = 12; + packet->data[0] = 0x09; /* activate rumble */ + packet->data[1] = 0x08; + packet->data[2] = xpad->odata_serial++; + packet->data[3] = 0x08; /* continuous effect */ + packet->data[4] = 0x00; /* simple rumble mode */ + packet->data[5] = 0x03; /* L and R actuator only */ + packet->data[6] = 0x00; /* TODO: LT actuator */ + packet->data[7] = 0x00; /* TODO: RT actuator */ + packet->data[8] = strong / 512; /* left actuator */ + packet->data[9] = weak / 512; /* right actuator */ + packet->data[10] = 0x80; /* length of pulse */ + packet->data[11] = 0x00; /* stop period of pulse */ + packet->data[12] = 0x00; + packet->len = 13; + packet->pending = true; break; default: dev_dbg(&xpad->dev->dev, "%s - rumble command sent to unsupported xpad type: %d\n", __func__, xpad->xtype); - return -EINVAL; + retval = -EINVAL; + goto out; } - return usb_submit_urb(xpad->irq_out, GFP_ATOMIC); + retval = xpad_try_sending_next_out_packet(xpad); + +out: + spin_unlock_irqrestore(&xpad->odata_lock, flags); + return retval; } static int xpad_init_ff(struct usb_xpad *xpad) @@ -921,36 +1094,44 @@ struct xpad_led { */ static void xpad_send_led_command(struct usb_xpad *xpad, int command) { + struct xpad_output_packet *packet = + &xpad->out_packets[XPAD_OUT_LED_IDX]; + unsigned long flags; + command %= 16; - mutex_lock(&xpad->odata_mutex); + spin_lock_irqsave(&xpad->odata_lock, flags); switch (xpad->xtype) { case XTYPE_XBOX360: - xpad->odata[0] = 0x01; - xpad->odata[1] = 0x03; - xpad->odata[2] = command; - xpad->irq_out->transfer_buffer_length = 3; + packet->data[0] = 0x01; + packet->data[1] = 0x03; + packet->data[2] = command; + packet->len = 3; + packet->pending = true; break; + case XTYPE_XBOX360W: - xpad->odata[0] = 0x00; - xpad->odata[1] = 0x00; - xpad->odata[2] = 0x08; - xpad->odata[3] = 0x40 + command; - xpad->odata[4] = 0x00; - xpad->odata[5] = 0x00; - xpad->odata[6] = 0x00; - xpad->odata[7] = 0x00; - xpad->odata[8] = 0x00; - xpad->odata[9] = 0x00; - xpad->odata[10] = 0x00; - xpad->odata[11] = 0x00; - xpad->irq_out->transfer_buffer_length = 12; + packet->data[0] = 0x00; + packet->data[1] = 0x00; + packet->data[2] = 0x08; + packet->data[3] = 0x40 + command; + packet->data[4] = 0x00; + packet->data[5] = 0x00; + packet->data[6] = 0x00; + packet->data[7] = 0x00; + packet->data[8] = 0x00; + packet->data[9] = 0x00; + packet->data[10] = 0x00; + packet->data[11] = 0x00; + packet->len = 12; + packet->pending = true; break; } - usb_submit_urb(xpad->irq_out, GFP_KERNEL); - mutex_unlock(&xpad->odata_mutex); + xpad_try_sending_next_out_packet(xpad); + + spin_unlock_irqrestore(&xpad->odata_lock, flags); } /* @@ -959,7 +1140,7 @@ static void xpad_send_led_command(struct usb_xpad *xpad, int command) */ static void xpad_identify_controller(struct usb_xpad *xpad) { - xpad_send_led_command(xpad, (xpad->pad_nr % 4) + 2); + led_set_brightness(&xpad->led->led_cdev, (xpad->pad_nr % 4) + 2); } static void xpad_led_set(struct led_classdev *led_cdev, @@ -1001,14 +1182,7 @@ static int xpad_led_probe(struct usb_xpad *xpad) if (error) goto err_free_id; - if (xpad->xtype == XTYPE_XBOX360) { - /* - * Light up the segment corresponding to controller - * number on wired devices. On wireless we'll do that - * when they respond to "presence" packet. - */ - xpad_identify_controller(xpad); - } + xpad_identify_controller(xpad); return 0; @@ -1036,37 +1210,73 @@ static void xpad_led_disconnect(struct usb_xpad *xpad) { } static void xpad_identify_controller(struct usb_xpad *xpad) { } #endif -static int xpad_open(struct input_dev *dev) +static int xpad_start_input(struct usb_xpad *xpad) { - struct usb_xpad *xpad = input_get_drvdata(dev); - - /* URB was submitted in probe */ - if (xpad->xtype == XTYPE_XBOX360W) - return 0; + int error; - xpad->irq_in->dev = xpad->udev; if (usb_submit_urb(xpad->irq_in, GFP_KERNEL)) return -EIO; if (xpad->xtype == XTYPE_XBOXONE) { - /* Xbox one controller needs to be initialized. */ - xpad->odata[0] = 0x05; - xpad->odata[1] = 0x20; - xpad->irq_out->transfer_buffer_length = 2; - return usb_submit_urb(xpad->irq_out, GFP_KERNEL); + error = xpad_start_xbox_one(xpad); + if (error) { + usb_kill_urb(xpad->irq_in); + return error; + } } return 0; } -static void xpad_close(struct input_dev *dev) +static void xpad_stop_input(struct usb_xpad *xpad) { - struct usb_xpad *xpad = input_get_drvdata(dev); + usb_kill_urb(xpad->irq_in); +} + +static int xpad360w_start_input(struct usb_xpad *xpad) +{ + int error; - if (xpad->xtype != XTYPE_XBOX360W) + error = usb_submit_urb(xpad->irq_in, GFP_KERNEL); + if (error) + return -EIO; + + /* + * Send presence packet. + * This will force the controller to resend connection packets. + * This is useful in the case we activate the module after the + * adapter has been plugged in, as it won't automatically + * send us info about the controllers. + */ + error = xpad_inquiry_pad_presence(xpad); + if (error) { usb_kill_urb(xpad->irq_in); + return error; + } - xpad_stop_output(xpad); + return 0; +} + +static void xpad360w_stop_input(struct usb_xpad *xpad) +{ + usb_kill_urb(xpad->irq_in); + + /* Make sure we are done with presence work if it was scheduled */ + flush_work(&xpad->work); +} + +static int xpad_open(struct input_dev *dev) +{ + struct usb_xpad *xpad = input_get_drvdata(dev); + + return xpad_start_input(xpad); +} + +static void xpad_close(struct input_dev *dev) +{ + struct usb_xpad *xpad = input_get_drvdata(dev); + + xpad_stop_input(xpad); } static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs) @@ -1097,8 +1307,11 @@ static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs) static void xpad_deinit_input(struct usb_xpad *xpad) { - xpad_led_disconnect(xpad); - input_unregister_device(xpad->dev); + if (xpad->input_created) { + xpad->input_created = false; + xpad_led_disconnect(xpad); + input_unregister_device(xpad->dev); + } } static int xpad_init_input(struct usb_xpad *xpad) @@ -1118,8 +1331,10 @@ static int xpad_init_input(struct usb_xpad *xpad) input_set_drvdata(input_dev, xpad); - input_dev->open = xpad_open; - input_dev->close = xpad_close; + if (xpad->xtype != XTYPE_XBOX360W) { + input_dev->open = xpad_open; + input_dev->close = xpad_close; + } __set_bit(EV_KEY, input_dev->evbit); @@ -1181,6 +1396,7 @@ static int xpad_init_input(struct usb_xpad *xpad) if (error) goto err_disconnect_led; + xpad->input_created = true; return 0; err_disconnect_led: @@ -1241,6 +1457,7 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id xpad->mapping = xpad_device[i].mapping; xpad->xtype = xpad_device[i].xtype; xpad->name = xpad_device[i].name; + INIT_WORK(&xpad->work, xpad_presence_work); if (xpad->xtype == XTYPE_UNKNOWN) { if (intf->cur_altsetting->desc.bInterfaceClass == USB_CLASS_VENDOR_SPEC) { @@ -1277,10 +1494,6 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id usb_set_intfdata(intf, xpad); - error = xpad_init_input(xpad); - if (error) - goto err_deinit_output; - if (xpad->xtype == XTYPE_XBOX360W) { /* * Submit the int URB immediately rather than waiting for open @@ -1289,28 +1502,24 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id * exactly the message that a controller has arrived that * we're waiting for. */ - xpad->irq_in->dev = xpad->udev; - error = usb_submit_urb(xpad->irq_in, GFP_KERNEL); + error = xpad360w_start_input(xpad); if (error) - goto err_deinit_input; - + goto err_deinit_output; /* - * Send presence packet. - * This will force the controller to resend connection packets. - * This is useful in the case we activate the module after the - * adapter has been plugged in, as it won't automatically - * send us info about the controllers. + * Wireless controllers require RESET_RESUME to work properly + * after suspend. Ideally this quirk should be in usb core + * quirk list, but we have too many vendors producing these + * controllers and we'd need to maintain 2 identical lists + * here in this driver and in usb core. */ - error = xpad_inquiry_pad_presence(xpad); + udev->quirks |= USB_QUIRK_RESET_RESUME; + } else { + error = xpad_init_input(xpad); if (error) - goto err_kill_in_urb; + goto err_deinit_output; } return 0; -err_kill_in_urb: - usb_kill_urb(xpad->irq_in); -err_deinit_input: - xpad_deinit_input(xpad); err_deinit_output: xpad_deinit_output(xpad); err_free_in_urb: @@ -1320,19 +1529,24 @@ err_free_idata: err_free_mem: kfree(xpad); return error; - } static void xpad_disconnect(struct usb_interface *intf) { - struct usb_xpad *xpad = usb_get_intfdata (intf); + struct usb_xpad *xpad = usb_get_intfdata(intf); + + if (xpad->xtype == XTYPE_XBOX360W) + xpad360w_stop_input(xpad); xpad_deinit_input(xpad); - xpad_deinit_output(xpad); - if (xpad->xtype == XTYPE_XBOX360W) { - usb_kill_urb(xpad->irq_in); - } + /* + * Now that both input device and LED device are gone we can + * stop output URB. + */ + xpad_stop_output(xpad); + + xpad_deinit_output(xpad); usb_free_urb(xpad->irq_in); usb_free_coherent(xpad->udev, XPAD_PKT_LEN, @@ -1343,10 +1557,55 @@ static void xpad_disconnect(struct usb_interface *intf) usb_set_intfdata(intf, NULL); } +static int xpad_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct usb_xpad *xpad = usb_get_intfdata(intf); + struct input_dev *input = xpad->dev; + + if (xpad->xtype == XTYPE_XBOX360W) { + /* + * Wireless controllers always listen to input so + * they are notified when controller shows up + * or goes away. + */ + xpad360w_stop_input(xpad); + } else { + mutex_lock(&input->mutex); + if (input->users) + xpad_stop_input(xpad); + mutex_unlock(&input->mutex); + } + + xpad_stop_output(xpad); + + return 0; +} + +static int xpad_resume(struct usb_interface *intf) +{ + struct usb_xpad *xpad = usb_get_intfdata(intf); + struct input_dev *input = xpad->dev; + int retval = 0; + + if (xpad->xtype == XTYPE_XBOX360W) { + retval = xpad360w_start_input(xpad); + } else { + mutex_lock(&input->mutex); + if (input->users) + retval = xpad_start_input(xpad); + mutex_unlock(&input->mutex); + } + + return retval; +} + static struct usb_driver xpad_driver = { .name = "xpad", .probe = xpad_probe, .disconnect = xpad_disconnect, + .suspend = xpad_suspend, + .resume = xpad_resume, + .reset_resume = xpad_resume, .id_table = xpad_table, }; diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c index b9f01bd1b7ef..29093657f2ef 100644 --- a/drivers/input/keyboard/gpio_keys.c +++ b/drivers/input/keyboard/gpio_keys.c @@ -630,7 +630,7 @@ gpio_keys_get_devtree_pdata(struct device *dev) if (!node) return ERR_PTR(-ENODEV); - nbuttons = of_get_child_count(node); + nbuttons = of_get_available_child_count(node); if (nbuttons == 0) return ERR_PTR(-ENODEV); @@ -645,8 +645,10 @@ gpio_keys_get_devtree_pdata(struct device *dev) pdata->rep = !!of_get_property(node, "autorepeat", NULL); + of_property_read_string(node, "label", &pdata->name); + i = 0; - for_each_child_of_node(node, pp) { + for_each_available_child_of_node(node, pp) { enum of_gpio_flags flags; button = &pdata->buttons[i++]; diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index 2d5794ec338b..2160512e861a 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -113,8 +113,8 @@ struct t7_config { #define MXT_T9_DETECT (1 << 7) struct t9_range { - u16 x; - u16 y; + __le16 x; + __le16 y; } __packed; /* MXT_TOUCH_MULTI_T9 orient */ @@ -216,6 +216,7 @@ struct mxt_data { unsigned int irq; unsigned int max_x; unsigned int max_y; + bool xy_switch; bool in_bootloader; u16 mem_size; u8 t100_aux_ampl; @@ -1665,8 +1666,8 @@ static int mxt_read_t9_resolution(struct mxt_data *data) if (error) return error; - le16_to_cpus(&range.x); - le16_to_cpus(&range.y); + data->max_x = get_unaligned_le16(&range.x); + data->max_y = get_unaligned_le16(&range.y); error = __mxt_read_reg(client, object->start_address + MXT_T9_ORIENT, @@ -1674,23 +1675,7 @@ static int mxt_read_t9_resolution(struct mxt_data *data) if (error) return error; - /* Handle default values */ - if (range.x == 0) - range.x = 1023; - - if (range.y == 0) - range.y = 1023; - - if (orient & MXT_T9_ORIENT_SWITCH) { - data->max_x = range.y; - data->max_y = range.x; - } else { - data->max_x = range.x; - data->max_y = range.y; - } - - dev_dbg(&client->dev, - "Touchscreen size X%uY%u\n", data->max_x, data->max_y); + data->xy_switch = orient & MXT_T9_ORIENT_SWITCH; return 0; } @@ -1708,13 +1693,14 @@ static int mxt_read_t100_config(struct mxt_data *data) if (!object) return -EINVAL; + /* read touchscreen dimensions */ error = __mxt_read_reg(client, object->start_address + MXT_T100_XRANGE, sizeof(range_x), &range_x); if (error) return error; - le16_to_cpus(&range_x); + data->max_x = get_unaligned_le16(&range_x); error = __mxt_read_reg(client, object->start_address + MXT_T100_YRANGE, @@ -1722,36 +1708,24 @@ static int mxt_read_t100_config(struct mxt_data *data) if (error) return error; - le16_to_cpus(&range_y); + data->max_y = get_unaligned_le16(&range_y); + /* read orientation config */ error = __mxt_read_reg(client, object->start_address + MXT_T100_CFG1, 1, &cfg); if (error) return error; + data->xy_switch = cfg & MXT_T100_CFG_SWITCHXY; + + /* allocate aux bytes */ error = __mxt_read_reg(client, object->start_address + MXT_T100_TCHAUX, 1, &tchaux); if (error) return error; - /* Handle default values */ - if (range_x == 0) - range_x = 1023; - - if (range_y == 0) - range_y = 1023; - - if (cfg & MXT_T100_CFG_SWITCHXY) { - data->max_x = range_y; - data->max_y = range_x; - } else { - data->max_x = range_x; - data->max_y = range_y; - } - - /* allocate aux bytes */ aux = 6; if (tchaux & MXT_T100_TCHAUX_VECT) @@ -1767,9 +1741,6 @@ static int mxt_read_t100_config(struct mxt_data *data) "T100 aux mappings vect:%u ampl:%u area:%u\n", data->t100_aux_vect, data->t100_aux_ampl, data->t100_aux_area); - dev_info(&client->dev, - "T100 Touchscreen size X%uY%u\n", data->max_x, data->max_y); - return 0; } @@ -1828,6 +1799,19 @@ static int mxt_initialize_input_device(struct mxt_data *data) return -EINVAL; } + /* Handle default values and orientation switch */ + if (data->max_x == 0) + data->max_x = 1023; + + if (data->max_y == 0) + data->max_y = 1023; + + if (data->xy_switch) + swap(data->max_x, data->max_y); + + dev_info(dev, "Touchscreen size X%uY%u\n", data->max_x, data->max_y); + + /* Register input device */ input_dev = input_allocate_device(); if (!input_dev) { dev_err(dev, "Failed to allocate memory\n"); |