diff options
Diffstat (limited to 'drivers/net/dsa/rtl8366.c')
| -rw-r--r-- | drivers/net/dsa/rtl8366.c | 515 |
1 files changed, 515 insertions, 0 deletions
diff --git a/drivers/net/dsa/rtl8366.c b/drivers/net/dsa/rtl8366.c new file mode 100644 index 000000000000..6dedd43442cc --- /dev/null +++ b/drivers/net/dsa/rtl8366.c @@ -0,0 +1,515 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Realtek SMI library helpers for the RTL8366x variants + * RTL8366RB and RTL8366S + * + * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org> + * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2010 Antti Seppälä <a.seppala@gmail.com> + * Copyright (C) 2010 Roman Yeryomin <roman@advem.lv> + * Copyright (C) 2011 Colin Leitner <colin.leitner@googlemail.com> + */ +#include <linux/if_bridge.h> +#include <net/dsa.h> + +#include "realtek-smi.h" + +int rtl8366_mc_is_used(struct realtek_smi *smi, int mc_index, int *used) +{ + int ret; + int i; + + *used = 0; + for (i = 0; i < smi->num_ports; i++) { + int index = 0; + + ret = smi->ops->get_mc_index(smi, i, &index); + if (ret) + return ret; + + if (mc_index == index) { + *used = 1; + break; + } + } + + return 0; +} +EXPORT_SYMBOL_GPL(rtl8366_mc_is_used); + +int rtl8366_set_vlan(struct realtek_smi *smi, int vid, u32 member, + u32 untag, u32 fid) +{ + struct rtl8366_vlan_4k vlan4k; + int ret; + int i; + + /* Update the 4K table */ + ret = smi->ops->get_vlan_4k(smi, vid, &vlan4k); + if (ret) + return ret; + + vlan4k.member = member; + vlan4k.untag = untag; + vlan4k.fid = fid; + ret = smi->ops->set_vlan_4k(smi, &vlan4k); + if (ret) + return ret; + + /* Try to find an existing MC entry for this VID */ + for (i = 0; i < smi->num_vlan_mc; i++) { + struct rtl8366_vlan_mc vlanmc; + + ret = smi->ops->get_vlan_mc(smi, i, &vlanmc); + if (ret) + return ret; + + if (vid == vlanmc.vid) { + /* update the MC entry */ + vlanmc.member = member; + vlanmc.untag = untag; + vlanmc.fid = fid; + + ret = smi->ops->set_vlan_mc(smi, i, &vlanmc); + break; + } + } + + return ret; +} +EXPORT_SYMBOL_GPL(rtl8366_set_vlan); + +int rtl8366_get_pvid(struct realtek_smi *smi, int port, int *val) +{ + struct rtl8366_vlan_mc vlanmc; + int ret; + int index; + + ret = smi->ops->get_mc_index(smi, port, &index); + if (ret) + return ret; + + ret = smi->ops->get_vlan_mc(smi, index, &vlanmc); + if (ret) + return ret; + + *val = vlanmc.vid; + return 0; +} +EXPORT_SYMBOL_GPL(rtl8366_get_pvid); + +int rtl8366_set_pvid(struct realtek_smi *smi, unsigned int port, + unsigned int vid) +{ + struct rtl8366_vlan_mc vlanmc; + struct rtl8366_vlan_4k vlan4k; + int ret; + int i; + + /* Try to find an existing MC entry for this VID */ + for (i = 0; i < smi->num_vlan_mc; i++) { + ret = smi->ops->get_vlan_mc(smi, i, &vlanmc); + if (ret) + return ret; + + if (vid == vlanmc.vid) { + ret = smi->ops->set_vlan_mc(smi, i, &vlanmc); + if (ret) + return ret; + + ret = smi->ops->set_mc_index(smi, port, i); + return ret; + } + } + + /* We have no MC entry for this VID, try to find an empty one */ + for (i = 0; i < smi->num_vlan_mc; i++) { + ret = smi->ops->get_vlan_mc(smi, i, &vlanmc); + if (ret) + return ret; + + if (vlanmc.vid == 0 && vlanmc.member == 0) { + /* Update the entry from the 4K table */ + ret = smi->ops->get_vlan_4k(smi, vid, &vlan4k); + if (ret) + return ret; + + vlanmc.vid = vid; + vlanmc.member = vlan4k.member; + vlanmc.untag = vlan4k.untag; + vlanmc.fid = vlan4k.fid; + ret = smi->ops->set_vlan_mc(smi, i, &vlanmc); + if (ret) + return ret; + + ret = smi->ops->set_mc_index(smi, port, i); + return ret; + } + } + + /* MC table is full, try to find an unused entry and replace it */ + for (i = 0; i < smi->num_vlan_mc; i++) { + int used; + + ret = rtl8366_mc_is_used(smi, i, &used); + if (ret) + return ret; + + if (!used) { + /* Update the entry from the 4K table */ + ret = smi->ops->get_vlan_4k(smi, vid, &vlan4k); + if (ret) + return ret; + + vlanmc.vid = vid; + vlanmc.member = vlan4k.member; + vlanmc.untag = vlan4k.untag; + vlanmc.fid = vlan4k.fid; + ret = smi->ops->set_vlan_mc(smi, i, &vlanmc); + if (ret) + return ret; + + ret = smi->ops->set_mc_index(smi, port, i); + return ret; + } + } + + dev_err(smi->dev, + "all VLAN member configurations are in use\n"); + + return -ENOSPC; +} +EXPORT_SYMBOL_GPL(rtl8366_set_pvid); + +int rtl8366_enable_vlan4k(struct realtek_smi *smi, bool enable) +{ + int ret; + + /* To enable 4k VLAN, ordinary VLAN must be enabled first, + * but if we disable 4k VLAN it is fine to leave ordinary + * VLAN enabled. + */ + if (enable) { + /* Make sure VLAN is ON */ + ret = smi->ops->enable_vlan(smi, true); + if (ret) + return ret; + + smi->vlan_enabled = true; + } + + ret = smi->ops->enable_vlan4k(smi, enable); + if (ret) + return ret; + + smi->vlan4k_enabled = enable; + return 0; +} +EXPORT_SYMBOL_GPL(rtl8366_enable_vlan4k); + +int rtl8366_enable_vlan(struct realtek_smi *smi, bool enable) +{ + int ret; + + ret = smi->ops->enable_vlan(smi, enable); + if (ret) + return ret; + + smi->vlan_enabled = enable; + + /* If we turn VLAN off, make sure that we turn off + * 4k VLAN as well, if that happened to be on. + */ + if (!enable) { + smi->vlan4k_enabled = false; + ret = smi->ops->enable_vlan4k(smi, false); + } + + return ret; +} +EXPORT_SYMBOL_GPL(rtl8366_enable_vlan); + +int rtl8366_reset_vlan(struct realtek_smi *smi) +{ + struct rtl8366_vlan_mc vlanmc; + int ret; + int i; + + rtl8366_enable_vlan(smi, false); + rtl8366_enable_vlan4k(smi, false); + + /* Clear the 16 VLAN member configurations */ + vlanmc.vid = 0; + vlanmc.priority = 0; + vlanmc.member = 0; + vlanmc.untag = 0; + vlanmc.fid = 0; + for (i = 0; i < smi->num_vlan_mc; i++) { + ret = smi->ops->set_vlan_mc(smi, i, &vlanmc); + if (ret) + return ret; + } + + return 0; +} +EXPORT_SYMBOL_GPL(rtl8366_reset_vlan); + +int rtl8366_init_vlan(struct realtek_smi *smi) +{ + int port; + int ret; + + ret = rtl8366_reset_vlan(smi); + if (ret) + return ret; + + /* Loop over the available ports, for each port, associate + * it with the VLAN (port+1) + */ + for (port = 0; port < smi->num_ports; port++) { + u32 mask; + + if (port == smi->cpu_port) + /* For the CPU port, make all ports members of this + * VLAN. + */ + mask = GENMASK(smi->num_ports - 1, 0); + else + /* For all other ports, enable itself plus the + * CPU port. + */ + mask = BIT(port) | BIT(smi->cpu_port); + + /* For each port, set the port as member of VLAN (port+1) + * and untagged, except for the CPU port: the CPU port (5) is + * member of VLAN 6 and so are ALL the other ports as well. + * Use filter 0 (no filter). + */ + dev_info(smi->dev, "VLAN%d port mask for port %d, %08x\n", + (port + 1), port, mask); + ret = rtl8366_set_vlan(smi, (port + 1), mask, mask, 0); + if (ret) + return ret; + + dev_info(smi->dev, "VLAN%d port %d, PVID set to %d\n", + (port + 1), port, (port + 1)); + ret = rtl8366_set_pvid(smi, port, (port + 1)); + if (ret) + return ret; + } + + return rtl8366_enable_vlan(smi, true); +} +EXPORT_SYMBOL_GPL(rtl8366_init_vlan); + +int rtl8366_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering) +{ + struct realtek_smi *smi = ds->priv; + struct rtl8366_vlan_4k vlan4k; + int ret; + + if (!smi->ops->is_vlan_valid(smi, port)) + return -EINVAL; + + dev_info(smi->dev, "%s filtering on port %d\n", + vlan_filtering ? "enable" : "disable", + port); + + /* TODO: + * The hardware support filter ID (FID) 0..7, I have no clue how to + * support this in the driver when the callback only says on/off. + */ + ret = smi->ops->get_vlan_4k(smi, port, &vlan4k); + if (ret) + return ret; + + /* Just set the filter to FID 1 for now then */ + ret = rtl8366_set_vlan(smi, port, + vlan4k.member, + vlan4k.untag, + 1); + if (ret) + return ret; + + return 0; +} +EXPORT_SYMBOL_GPL(rtl8366_vlan_filtering); + +int rtl8366_vlan_prepare(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan) +{ + struct realtek_smi *smi = ds->priv; + int ret; + + if (!smi->ops->is_vlan_valid(smi, port)) + return -EINVAL; + + dev_info(smi->dev, "prepare VLANs %04x..%04x\n", + vlan->vid_begin, vlan->vid_end); + + /* Enable VLAN in the hardware + * FIXME: what's with this 4k business? + * Just rtl8366_enable_vlan() seems inconclusive. + */ + ret = rtl8366_enable_vlan4k(smi, true); + if (ret) + return ret; + + return 0; +} +EXPORT_SYMBOL_GPL(rtl8366_vlan_prepare); + +void rtl8366_vlan_add(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan) +{ + bool untagged = !!(vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED); + bool pvid = !!(vlan->flags & BRIDGE_VLAN_INFO_PVID); + struct realtek_smi *smi = ds->priv; + u32 member = 0; + u32 untag = 0; + u16 vid; + int ret; + + if (!smi->ops->is_vlan_valid(smi, port)) + return; + + dev_info(smi->dev, "add VLAN on port %d, %s, %s\n", + port, + untagged ? "untagged" : "tagged", + pvid ? " PVID" : "no PVID"); + + if (dsa_is_dsa_port(ds, port) || dsa_is_cpu_port(ds, port)) + dev_err(smi->dev, "port is DSA or CPU port\n"); + + for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) { + int pvid_val = 0; + + dev_info(smi->dev, "add VLAN %04x\n", vid); + member |= BIT(port); + + if (untagged) + untag |= BIT(port); + + /* To ensure that we have a valid MC entry for this VLAN, + * initialize the port VLAN ID here. + */ + ret = rtl8366_get_pvid(smi, port, &pvid_val); + if (ret < 0) { + dev_err(smi->dev, "could not lookup PVID for port %d\n", + port); + return; + } + if (pvid_val == 0) { + ret = rtl8366_set_pvid(smi, port, vid); + if (ret < 0) + return; + } + } + + ret = rtl8366_set_vlan(smi, port, member, untag, 0); + if (ret) + dev_err(smi->dev, + "failed to set up VLAN %04x", + vid); +} +EXPORT_SYMBOL_GPL(rtl8366_vlan_add); + +int rtl8366_vlan_del(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan) +{ + struct realtek_smi *smi = ds->priv; + u16 vid; + int ret; + + dev_info(smi->dev, "del VLAN on port %d\n", port); + + for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) { + int i; + + dev_info(smi->dev, "del VLAN %04x\n", vid); + + for (i = 0; i < smi->num_vlan_mc; i++) { + struct rtl8366_vlan_mc vlanmc; + + ret = smi->ops->get_vlan_mc(smi, i, &vlanmc); + if (ret) + return ret; + + if (vid == vlanmc.vid) { + /* clear VLAN member configurations */ + vlanmc.vid = 0; + vlanmc.priority = 0; + vlanmc.member = 0; + vlanmc.untag = 0; + vlanmc.fid = 0; + + ret = smi->ops->set_vlan_mc(smi, i, &vlanmc); + if (ret) { + dev_err(smi->dev, + "failed to remove VLAN %04x\n", + vid); + return ret; + } + break; + } + } + } + + return 0; +} +EXPORT_SYMBOL_GPL(rtl8366_vlan_del); + +void rtl8366_get_strings(struct dsa_switch *ds, int port, u32 stringset, + uint8_t *data) +{ + struct realtek_smi *smi = ds->priv; + struct rtl8366_mib_counter *mib; + int i; + + if (port >= smi->num_ports) + return; + + for (i = 0; i < smi->num_mib_counters; i++) { + mib = &smi->mib_counters[i]; + strncpy(data + i * ETH_GSTRING_LEN, + mib->name, ETH_GSTRING_LEN); + } +} +EXPORT_SYMBOL_GPL(rtl8366_get_strings); + +int rtl8366_get_sset_count(struct dsa_switch *ds, int port, int sset) +{ + struct realtek_smi *smi = ds->priv; + + /* We only support SS_STATS */ + if (sset != ETH_SS_STATS) + return 0; + if (port >= smi->num_ports) + return -EINVAL; + + return smi->num_mib_counters; +} +EXPORT_SYMBOL_GPL(rtl8366_get_sset_count); + +void rtl8366_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data) +{ + struct realtek_smi *smi = ds->priv; + int i; + int ret; + + if (port >= smi->num_ports) + return; + + for (i = 0; i < smi->num_mib_counters; i++) { + struct rtl8366_mib_counter *mib; + u64 mibvalue = 0; + + mib = &smi->mib_counters[i]; + ret = smi->ops->get_mib_counter(smi, port, mib, &mibvalue); + if (ret) { + dev_err(smi->dev, "error reading MIB counter %s\n", + mib->name); + } + data[i] = mibvalue; + } +} +EXPORT_SYMBOL_GPL(rtl8366_get_ethtool_stats); |