summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h')
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h53
1 files changed, 43 insertions, 10 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h
index ea4371f4335f..51cac8130051 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h
@@ -41,6 +41,7 @@
#define SPEED_AUTO_NEG 0
#define SPEED_20000 20000
+#define SFP_EEPROM_PAGE_SIZE 16
#define SFP_EEPROM_VENDOR_NAME_ADDR 0x14
#define SFP_EEPROM_VENDOR_NAME_SIZE 16
#define SFP_EEPROM_VENDOR_OUI_ADDR 0x25
@@ -125,6 +126,11 @@ typedef void (*set_link_led_t)(struct bnx2x_phy *phy,
struct link_params *params, u8 mode);
typedef void (*phy_specific_func_t)(struct bnx2x_phy *phy,
struct link_params *params, u32 action);
+struct bnx2x_reg_set {
+ u8 devad;
+ u16 reg;
+ u16 val;
+};
struct bnx2x_phy {
u32 type;
@@ -149,6 +155,7 @@ struct bnx2x_phy {
#define FLAGS_DUMMY_READ (1<<9)
#define FLAGS_MDC_MDIO_WA_B0 (1<<10)
#define FLAGS_TX_ERROR_CHECK (1<<12)
+#define FLAGS_EEE_10GBT (1<<13)
/* preemphasis values for the rx side */
u16 rx_preemphasis[4];
@@ -162,14 +169,15 @@ struct bnx2x_phy {
u32 supported;
u32 media_type;
-#define ETH_PHY_UNSPECIFIED 0x0
-#define ETH_PHY_SFP_FIBER 0x1
-#define ETH_PHY_XFP_FIBER 0x2
-#define ETH_PHY_DA_TWINAX 0x3
-#define ETH_PHY_BASE_T 0x4
-#define ETH_PHY_KR 0xf0
-#define ETH_PHY_CX4 0xf1
-#define ETH_PHY_NOT_PRESENT 0xff
+#define ETH_PHY_UNSPECIFIED 0x0
+#define ETH_PHY_SFPP_10G_FIBER 0x1
+#define ETH_PHY_XFP_FIBER 0x2
+#define ETH_PHY_DA_TWINAX 0x3
+#define ETH_PHY_BASE_T 0x4
+#define ETH_PHY_SFP_1G_FIBER 0x5
+#define ETH_PHY_KR 0xf0
+#define ETH_PHY_CX4 0xf1
+#define ETH_PHY_NOT_PRESENT 0xff
/* The address in which version is located*/
u32 ver_addr;
@@ -265,6 +273,30 @@ struct link_params {
u8 num_phys;
u8 rsrv;
+
+ /* Used to configure the EEE Tx LPI timer, has several modes of
+ * operation, according to bits 29:28 -
+ * 2'b00: Timer will be configured by nvram, output will be the value
+ * from nvram.
+ * 2'b01: Timer will be configured by nvram, output will be in
+ * microseconds.
+ * 2'b10: bits 1:0 contain an nvram value which will be used instead
+ * of the one located in the nvram. Output will be that value.
+ * 2'b11: bits 19:0 contain the idle timer in microseconds; output
+ * will be in microseconds.
+ * Bits 31:30 should be 2'b11 in order for EEE to be enabled.
+ */
+ u32 eee_mode;
+#define EEE_MODE_NVRAM_BALANCED_TIME (0xa00)
+#define EEE_MODE_NVRAM_AGGRESSIVE_TIME (0x100)
+#define EEE_MODE_NVRAM_LATENCY_TIME (0x6000)
+#define EEE_MODE_NVRAM_MASK (0x3)
+#define EEE_MODE_TIMER_MASK (0xfffff)
+#define EEE_MODE_OUTPUT_TIME (1<<28)
+#define EEE_MODE_OVERRIDE_NVRAM (1<<29)
+#define EEE_MODE_ENABLE_LPI (1<<30)
+#define EEE_MODE_ADV_LPI (1<<31)
+
u16 hw_led_mode; /* part of the hw_config read from the shmem */
u32 multi_phy_config;
@@ -282,6 +314,7 @@ struct link_vars {
#define PHY_PHYSICAL_LINK_FLAG (1<<2)
#define PHY_HALF_OPEN_CONN_FLAG (1<<3)
#define PHY_OVER_CURRENT_FLAG (1<<4)
+#define PHY_SFP_TX_FAULT_FLAG (1<<5)
u8 mac_type;
#define MAC_TYPE_NONE 0
@@ -301,6 +334,7 @@ struct link_vars {
/* The same definitions as the shmem parameter */
u32 link_status;
+ u32 eee_status;
u8 fault_detected;
u8 rsrv1;
u16 periodic_flags;
@@ -459,8 +493,7 @@ struct bnx2x_ets_params {
struct bnx2x_ets_cos_params cos[DCBX_MAX_NUM_COS];
};
-/**
- * Used to update the PFC attributes in EMAC, BMAC, NIG and BRB
+/* Used to update the PFC attributes in EMAC, BMAC, NIG and BRB
* when link is already up
*/
int bnx2x_update_pfc(struct link_params *params,