diff options
Diffstat (limited to 'drivers/net/ethernet/cadence/macb_main.c')
-rw-r--r-- | drivers/net/ethernet/cadence/macb_main.c | 61 |
1 files changed, 41 insertions, 20 deletions
diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c index 9c767ee252ac..f7d87c71aaa9 100644 --- a/drivers/net/ethernet/cadence/macb_main.c +++ b/drivers/net/ethernet/cadence/macb_main.c @@ -611,21 +611,24 @@ static const struct phylink_mac_ops macb_phylink_ops = { .mac_link_up = macb_mac_link_up, }; +static bool macb_phy_handle_exists(struct device_node *dn) +{ + dn = of_parse_phandle(dn, "phy-handle", 0); + of_node_put(dn); + return dn != NULL; +} + static int macb_phylink_connect(struct macb *bp) { + struct device_node *dn = bp->pdev->dev.of_node; struct net_device *dev = bp->dev; struct phy_device *phydev; int ret; - if (bp->pdev->dev.of_node && - of_parse_phandle(bp->pdev->dev.of_node, "phy-handle", 0)) { - ret = phylink_of_phy_connect(bp->phylink, bp->pdev->dev.of_node, - 0); - if (ret) { - netdev_err(dev, "Could not attach PHY (%d)\n", ret); - return ret; - } - } else { + if (dn) + ret = phylink_of_phy_connect(bp->phylink, dn, 0); + + if (!dn || (ret && !macb_phy_handle_exists(dn))) { phydev = phy_find_first(bp->mii_bus); if (!phydev) { netdev_err(dev, "no PHY found\n"); @@ -634,10 +637,11 @@ static int macb_phylink_connect(struct macb *bp) /* attach the mac to the phy */ ret = phylink_connect_phy(bp->phylink, phydev); - if (ret) { - netdev_err(dev, "Could not attach to PHY (%d)\n", ret); - return ret; - } + } + + if (ret) { + netdev_err(dev, "Could not attach PHY (%d)\n", ret); + return ret; } phylink_start(bp->phylink); @@ -664,9 +668,30 @@ static int macb_mii_probe(struct net_device *dev) return 0; } +static int macb_mdiobus_register(struct macb *bp) +{ + struct device_node *child, *np = bp->pdev->dev.of_node; + + /* Only create the PHY from the device tree if at least one PHY is + * described. Otherwise scan the entire MDIO bus. We do this to support + * old device tree that did not follow the best practices and did not + * describe their network PHYs. + */ + for_each_available_child_of_node(np, child) + if (of_mdiobus_child_is_phy(child)) { + /* The loop increments the child refcount, + * decrement it before returning. + */ + of_node_put(child); + + return of_mdiobus_register(bp->mii_bus, np); + } + + return mdiobus_register(bp->mii_bus); +} + static int macb_mii_init(struct macb *bp) { - struct device_node *np; int err = -ENXIO; /* Enable management port */ @@ -688,9 +713,7 @@ static int macb_mii_init(struct macb *bp) dev_set_drvdata(&bp->dev->dev, bp->mii_bus); - np = bp->pdev->dev.of_node; - - err = of_mdiobus_register(bp->mii_bus, np); + err = macb_mdiobus_register(bp); if (err) goto err_out_free_mdiobus; @@ -4069,7 +4092,7 @@ static int fu540_c000_clk_init(struct platform_device *pdev, struct clk **pclk, mgmt->rate = 0; mgmt->hw.init = &init; - *tx_clk = clk_register(NULL, &mgmt->hw); + *tx_clk = devm_clk_register(&pdev->dev, &mgmt->hw); if (IS_ERR(*tx_clk)) return PTR_ERR(*tx_clk); @@ -4397,7 +4420,6 @@ err_out_free_netdev: err_disable_clocks: clk_disable_unprepare(tx_clk); - clk_unregister(tx_clk); clk_disable_unprepare(hclk); clk_disable_unprepare(pclk); clk_disable_unprepare(rx_clk); @@ -4427,7 +4449,6 @@ static int macb_remove(struct platform_device *pdev) pm_runtime_dont_use_autosuspend(&pdev->dev); if (!pm_runtime_suspended(&pdev->dev)) { clk_disable_unprepare(bp->tx_clk); - clk_unregister(bp->tx_clk); clk_disable_unprepare(bp->hclk); clk_disable_unprepare(bp->pclk); clk_disable_unprepare(bp->rx_clk); |