summaryrefslogtreecommitdiff
path: root/drivers/net/s2io.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/s2io.c')
-rw-r--r--drivers/net/s2io.c223
1 files changed, 140 insertions, 83 deletions
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 846873159662..1dcda887cef7 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -26,15 +26,22 @@
*
* The module loadable parameters that are supported by the driver and a brief
* explaination of all the variables.
+ *
* rx_ring_num : This can be used to program the number of receive rings used
* in the driver.
- * rx_ring_sz: This defines the number of descriptors each ring can have. This
- * is also an array of size 8.
+ * rx_ring_sz: This defines the number of receive blocks each ring can have.
+ * This is also an array of size 8.
* rx_ring_mode: This defines the operation mode of all 8 rings. The valid
* values are 1, 2 and 3.
* tx_fifo_num: This defines the number of Tx FIFOs thats used int the driver.
* tx_fifo_len: This too is an array of 8. Each element defines the number of
* Tx descriptors that can be associated with each corresponding FIFO.
+ * intr_type: This defines the type of interrupt. The values can be 0(INTA),
+ * 1(MSI), 2(MSI_X). Default value is '0(INTA)'
+ * lro: Specifies whether to enable Large Receive Offload (LRO) or not.
+ * Possible values '1' for enable '0' for disable. Default is '0'
+ * lro_max_pkts: This parameter defines maximum number of packets can be
+ * aggregated as a single large packet
************************************************************************/
#include <linux/config.h>
@@ -299,10 +306,10 @@ static const u64 fix_mac[] = {
/* Module Loadable parameters. */
static unsigned int tx_fifo_num = 1;
static unsigned int tx_fifo_len[MAX_TX_FIFOS] =
- {[0 ...(MAX_TX_FIFOS - 1)] = 0 };
+ {DEFAULT_FIFO_0_LEN, [1 ...(MAX_TX_FIFOS - 1)] = DEFAULT_FIFO_1_7_LEN};
static unsigned int rx_ring_num = 1;
static unsigned int rx_ring_sz[MAX_RX_RINGS] =
- {[0 ...(MAX_RX_RINGS - 1)] = 0 };
+ {[0 ...(MAX_RX_RINGS - 1)] = SMALL_BLK_CNT};
static unsigned int rts_frm_len[MAX_RX_RINGS] =
{[0 ...(MAX_RX_RINGS - 1)] = 0 };
static unsigned int rx_ring_mode = 1;
@@ -4626,6 +4633,45 @@ static int write_eeprom(nic_t * sp, int off, u64 data, int cnt)
return ret;
}
+static void s2io_vpd_read(nic_t *nic)
+{
+ u8 vpd_data[256],data;
+ int i=0, cnt, fail = 0;
+ int vpd_addr = 0x80;
+
+ if (nic->device_type == XFRAME_II_DEVICE) {
+ strcpy(nic->product_name, "Xframe II 10GbE network adapter");
+ vpd_addr = 0x80;
+ }
+ else {
+ strcpy(nic->product_name, "Xframe I 10GbE network adapter");
+ vpd_addr = 0x50;
+ }
+
+ for (i = 0; i < 256; i +=4 ) {
+ pci_write_config_byte(nic->pdev, (vpd_addr + 2), i);
+ pci_read_config_byte(nic->pdev, (vpd_addr + 2), &data);
+ pci_write_config_byte(nic->pdev, (vpd_addr + 3), 0);
+ for (cnt = 0; cnt <5; cnt++) {
+ msleep(2);
+ pci_read_config_byte(nic->pdev, (vpd_addr + 3), &data);
+ if (data == 0x80)
+ break;
+ }
+ if (cnt >= 5) {
+ DBG_PRINT(ERR_DBG, "Read of VPD data failed\n");
+ fail = 1;
+ break;
+ }
+ pci_read_config_dword(nic->pdev, (vpd_addr + 4),
+ (u32 *)&vpd_data[i]);
+ }
+ if ((!fail) && (vpd_data[1] < VPD_PRODUCT_NAME_LEN)) {
+ memset(nic->product_name, 0, vpd_data[1]);
+ memcpy(nic->product_name, &vpd_data[3], vpd_data[1]);
+ }
+}
+
/**
* s2io_ethtool_geeprom - reads the value stored in the Eeprom.
* @sp : private member of the device structure, which is a pointer to the * s2io_nic structure.
@@ -5962,6 +6008,55 @@ module_param(intr_type, int, 0);
module_param(lro, int, 0);
module_param(lro_max_pkts, int, 0);
+static int s2io_verify_parm(struct pci_dev *pdev, u8 *dev_intr_type)
+{
+ if ( tx_fifo_num > 8) {
+ DBG_PRINT(ERR_DBG, "s2io: Requested number of Tx fifos not "
+ "supported\n");
+ DBG_PRINT(ERR_DBG, "s2io: Default to 8 Tx fifos\n");
+ tx_fifo_num = 8;
+ }
+ if ( rx_ring_num > 8) {
+ DBG_PRINT(ERR_DBG, "s2io: Requested number of Rx rings not "
+ "supported\n");
+ DBG_PRINT(ERR_DBG, "s2io: Default to 8 Rx rings\n");
+ rx_ring_num = 8;
+ }
+#ifdef CONFIG_S2IO_NAPI
+ if (*dev_intr_type != INTA) {
+ DBG_PRINT(ERR_DBG, "s2io: NAPI cannot be enabled when "
+ "MSI/MSI-X is enabled. Defaulting to INTA\n");
+ *dev_intr_type = INTA;
+ }
+#endif
+#ifndef CONFIG_PCI_MSI
+ if (*dev_intr_type != INTA) {
+ DBG_PRINT(ERR_DBG, "s2io: This kernel does not support"
+ "MSI/MSI-X. Defaulting to INTA\n");
+ *dev_intr_type = INTA;
+ }
+#else
+ if (*dev_intr_type > MSI_X) {
+ DBG_PRINT(ERR_DBG, "s2io: Wrong intr_type requested. "
+ "Defaulting to INTA\n");
+ *dev_intr_type = INTA;
+ }
+#endif
+ if ((*dev_intr_type == MSI_X) &&
+ ((pdev->device != PCI_DEVICE_ID_HERC_WIN) &&
+ (pdev->device != PCI_DEVICE_ID_HERC_UNI))) {
+ DBG_PRINT(ERR_DBG, "s2io: Xframe I does not support MSI_X. "
+ "Defaulting to INTA\n");
+ *dev_intr_type = INTA;
+ }
+ if (rx_ring_mode > 3) {
+ DBG_PRINT(ERR_DBG, "s2io: Requested ring mode not supported\n");
+ DBG_PRINT(ERR_DBG, "s2io: Defaulting to 3-buffer mode\n");
+ rx_ring_mode = 3;
+ }
+ return SUCCESS;
+}
+
/**
* s2io_init_nic - Initialization of the adapter .
* @pdev : structure containing the PCI related information of the device.
@@ -5992,15 +6087,8 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
int mode;
u8 dev_intr_type = intr_type;
-#ifdef CONFIG_S2IO_NAPI
- if (dev_intr_type != INTA) {
- DBG_PRINT(ERR_DBG, "NAPI cannot be enabled when MSI/MSI-X \
-is enabled. Defaulting to INTA\n");
- dev_intr_type = INTA;
- }
- else
- DBG_PRINT(ERR_DBG, "NAPI support has been enabled\n");
-#endif
+ if ((ret = s2io_verify_parm(pdev, &dev_intr_type)))
+ return ret;
if ((ret = pci_enable_device(pdev))) {
DBG_PRINT(ERR_DBG,
@@ -6025,14 +6113,6 @@ is enabled. Defaulting to INTA\n");
pci_disable_device(pdev);
return -ENOMEM;
}
-
- if ((dev_intr_type == MSI_X) &&
- ((pdev->device != PCI_DEVICE_ID_HERC_WIN) &&
- (pdev->device != PCI_DEVICE_ID_HERC_UNI))) {
- DBG_PRINT(ERR_DBG, "Xframe I does not support MSI_X. \
-Defaulting to INTA\n");
- dev_intr_type = INTA;
- }
if (dev_intr_type != MSI_X) {
if (pci_request_regions(pdev, s2io_driver_name)) {
DBG_PRINT(ERR_DBG, "Request Regions failed\n"),
@@ -6108,8 +6188,6 @@ Defaulting to INTA\n");
config = &sp->config;
/* Tx side parameters. */
- if (tx_fifo_len[0] == 0)
- tx_fifo_len[0] = DEFAULT_FIFO_LEN; /* Default value. */
config->tx_fifo_num = tx_fifo_num;
for (i = 0; i < MAX_TX_FIFOS; i++) {
config->tx_cfg[i].fifo_len = tx_fifo_len[i];
@@ -6133,8 +6211,6 @@ Defaulting to INTA\n");
config->max_txds = MAX_SKB_FRAGS + 2;
/* Rx side parameters. */
- if (rx_ring_sz[0] == 0)
- rx_ring_sz[0] = SMALL_BLK_CNT; /* Default value. */
config->rx_ring_num = rx_ring_num;
for (i = 0; i < MAX_RX_RINGS; i++) {
config->rx_cfg[i].num_rxd = rx_ring_sz[i] *
@@ -6330,82 +6406,63 @@ Defaulting to INTA\n");
ret = -ENODEV;
goto register_failed;
}
-
- if (sp->device_type & XFRAME_II_DEVICE) {
- DBG_PRINT(ERR_DBG, "%s: Neterion Xframe II 10GbE adapter ",
- dev->name);
- DBG_PRINT(ERR_DBG, "(rev %d), Version %s",
+ s2io_vpd_read(sp);
+ DBG_PRINT(ERR_DBG, "%s: Neterion %s",dev->name, sp->product_name);
+ DBG_PRINT(ERR_DBG, "(rev %d), Driver version %s\n",
get_xena_rev_id(sp->pdev),
s2io_driver_version);
- switch(sp->intr_type) {
- case INTA:
- DBG_PRINT(ERR_DBG, ", Intr type INTA");
- break;
- case MSI:
- DBG_PRINT(ERR_DBG, ", Intr type MSI");
- break;
- case MSI_X:
- DBG_PRINT(ERR_DBG, ", Intr type MSI-X");
- break;
- }
-
- DBG_PRINT(ERR_DBG, "\nCopyright(c) 2002-2005 Neterion Inc.\n");
- DBG_PRINT(ERR_DBG, "MAC ADDR: %02x:%02x:%02x:%02x:%02x:%02x\n",
+ DBG_PRINT(ERR_DBG, "Copyright(c) 2002-2005 Neterion Inc.\n");
+ DBG_PRINT(ERR_DBG, "%s: MAC ADDR: "
+ "%02x:%02x:%02x:%02x:%02x:%02x\n", dev->name,
sp->def_mac_addr[0].mac_addr[0],
sp->def_mac_addr[0].mac_addr[1],
sp->def_mac_addr[0].mac_addr[2],
sp->def_mac_addr[0].mac_addr[3],
sp->def_mac_addr[0].mac_addr[4],
sp->def_mac_addr[0].mac_addr[5]);
+ if (sp->device_type & XFRAME_II_DEVICE) {
mode = s2io_print_pci_mode(sp);
if (mode < 0) {
- DBG_PRINT(ERR_DBG, " Unsupported PCI bus mode ");
+ DBG_PRINT(ERR_DBG, " Unsupported PCI bus mode\n");
ret = -EBADSLT;
+ unregister_netdev(dev);
goto set_swap_failed;
}
- } else {
- DBG_PRINT(ERR_DBG, "%s: Neterion Xframe I 10GbE adapter ",
- dev->name);
- DBG_PRINT(ERR_DBG, "(rev %d), Version %s",
- get_xena_rev_id(sp->pdev),
- s2io_driver_version);
- switch(sp->intr_type) {
- case INTA:
- DBG_PRINT(ERR_DBG, ", Intr type INTA");
- break;
- case MSI:
- DBG_PRINT(ERR_DBG, ", Intr type MSI");
- break;
- case MSI_X:
- DBG_PRINT(ERR_DBG, ", Intr type MSI-X");
- break;
- }
- DBG_PRINT(ERR_DBG, "\nCopyright(c) 2002-2005 Neterion Inc.\n");
- DBG_PRINT(ERR_DBG, "MAC ADDR: %02x:%02x:%02x:%02x:%02x:%02x\n",
- sp->def_mac_addr[0].mac_addr[0],
- sp->def_mac_addr[0].mac_addr[1],
- sp->def_mac_addr[0].mac_addr[2],
- sp->def_mac_addr[0].mac_addr[3],
- sp->def_mac_addr[0].mac_addr[4],
- sp->def_mac_addr[0].mac_addr[5]);
}
- if (sp->rxd_mode == RXD_MODE_3B)
- DBG_PRINT(ERR_DBG, "%s: 2-Buffer mode support has been "
- "enabled\n",dev->name);
- if (sp->rxd_mode == RXD_MODE_3A)
- DBG_PRINT(ERR_DBG, "%s: 3-Buffer mode support has been "
- "enabled\n",dev->name);
-
+ switch(sp->rxd_mode) {
+ case RXD_MODE_1:
+ DBG_PRINT(ERR_DBG, "%s: 1-Buffer receive mode enabled\n",
+ dev->name);
+ break;
+ case RXD_MODE_3B:
+ DBG_PRINT(ERR_DBG, "%s: 2-Buffer receive mode enabled\n",
+ dev->name);
+ break;
+ case RXD_MODE_3A:
+ DBG_PRINT(ERR_DBG, "%s: 3-Buffer receive mode enabled\n",
+ dev->name);
+ break;
+ }
+#ifdef CONFIG_S2IO_NAPI
+ DBG_PRINT(ERR_DBG, "%s: NAPI enabled\n", dev->name);
+#endif
+ switch(sp->intr_type) {
+ case INTA:
+ DBG_PRINT(ERR_DBG, "%s: Interrupt type INTA\n", dev->name);
+ break;
+ case MSI:
+ DBG_PRINT(ERR_DBG, "%s: Interrupt type MSI\n", dev->name);
+ break;
+ case MSI_X:
+ DBG_PRINT(ERR_DBG, "%s: Interrupt type MSI-X\n", dev->name);
+ break;
+ }
if (sp->lro)
DBG_PRINT(ERR_DBG, "%s: Large receive offload enabled\n",
- dev->name);
+ dev->name);
/* Initialize device name */
- strcpy(sp->name, dev->name);
- if (sp->device_type & XFRAME_II_DEVICE)
- strcat(sp->name, ": Neterion Xframe II 10GbE adapter");
- else
- strcat(sp->name, ": Neterion Xframe I 10GbE adapter");
+ sprintf(sp->name, "%s Neterion %s", dev->name, sp->product_name);
/* Initialize bimodal Interrupts */
sp->config.bimodal = bimodal;