diff options
Diffstat (limited to 'drivers/nvme')
| -rw-r--r-- | drivers/nvme/host/pci.c | 24 |
1 files changed, 17 insertions, 7 deletions
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index 909dadcdab09..5b23d5818f75 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -3087,8 +3087,13 @@ static int nvme_resume(struct device *dev) if (ndev->last_ps == U32_MAX || nvme_set_power_state(ctrl, ndev->last_ps) != 0) - return nvme_try_sched_reset(&ndev->ctrl); + goto reset; + if (ctrl->hmpre && nvme_setup_host_mem(ndev)) + goto reset; + return 0; +reset: + return nvme_try_sched_reset(ctrl); } static int nvme_suspend(struct device *dev) @@ -3112,15 +3117,9 @@ static int nvme_suspend(struct device *dev) * the PCI bus layer to put it into D3 in order to take the PCIe link * down, so as to allow the platform to achieve its minimum low-power * state (which may not be possible if the link is up). - * - * If a host memory buffer is enabled, shut down the device as the NVMe - * specification allows the device to access the host memory buffer in - * host DRAM from all power states, but hosts will fail access to DRAM - * during S3. */ if (pm_suspend_via_firmware() || !ctrl->npss || !pcie_aspm_enabled(pdev) || - ndev->nr_host_mem_descs || (ndev->ctrl.quirks & NVME_QUIRK_SIMPLE_SUSPEND)) return nvme_disable_prepare_reset(ndev, true); @@ -3131,6 +3130,17 @@ static int nvme_suspend(struct device *dev) if (ctrl->state != NVME_CTRL_LIVE) goto unfreeze; + /* + * Host memory access may not be successful in a system suspend state, + * but the specification allows the controller to access memory in a + * non-operational power state. + */ + if (ndev->hmb) { + ret = nvme_set_host_mem(ndev, 0); + if (ret < 0) + goto unfreeze; + } + ret = nvme_get_power_state(ctrl, &ndev->last_ps); if (ret < 0) goto unfreeze; |