summaryrefslogtreecommitdiff
path: root/drivers/pci/pci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pci/pci.c')
-rw-r--r--drivers/pci/pci.c114
1 files changed, 105 insertions, 9 deletions
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 9eae64b17954..8effb9b23eec 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -622,7 +622,8 @@ static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
dev_info(&dev->dev, "Refused to change power state, "
"currently in D%d\n", dev->current_state);
- /* According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT
+ /*
+ * According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT
* INTERFACE SPECIFICATION, REV. 1.2", a device transitioning
* from D3hot to D0 _may_ perform an internal reset, thereby
* going to "D0 Uninitialized" rather than "D0 Initialized".
@@ -654,6 +655,16 @@ void pci_update_current_state(struct pci_dev *dev, pci_power_t state)
if (dev->pm_cap) {
u16 pmcsr;
+ /*
+ * Configuration space is not accessible for device in
+ * D3cold, so just keep or set D3cold for safety
+ */
+ if (dev->current_state == PCI_D3cold)
+ return;
+ if (state == PCI_D3cold) {
+ dev->current_state = PCI_D3cold;
+ return;
+ }
pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
} else {
@@ -694,8 +705,50 @@ static int pci_platform_power_transition(struct pci_dev *dev, pci_power_t state)
*/
static void __pci_start_power_transition(struct pci_dev *dev, pci_power_t state)
{
- if (state == PCI_D0)
+ if (state == PCI_D0) {
pci_platform_power_transition(dev, PCI_D0);
+ /*
+ * Mandatory power management transition delays, see
+ * PCI Express Base Specification Revision 2.0 Section
+ * 6.6.1: Conventional Reset. Do not delay for
+ * devices powered on/off by corresponding bridge,
+ * because have already delayed for the bridge.
+ */
+ if (dev->runtime_d3cold) {
+ msleep(dev->d3cold_delay);
+ /*
+ * When powering on a bridge from D3cold, the
+ * whole hierarchy may be powered on into
+ * D0uninitialized state, resume them to give
+ * them a chance to suspend again
+ */
+ pci_wakeup_bus(dev->subordinate);
+ }
+ }
+}
+
+/**
+ * __pci_dev_set_current_state - Set current state of a PCI device
+ * @dev: Device to handle
+ * @data: pointer to state to be set
+ */
+static int __pci_dev_set_current_state(struct pci_dev *dev, void *data)
+{
+ pci_power_t state = *(pci_power_t *)data;
+
+ dev->current_state = state;
+ return 0;
+}
+
+/**
+ * __pci_bus_set_current_state - Walk given bus and set current state of devices
+ * @bus: Top bus of the subtree to walk.
+ * @state: state to be set
+ */
+static void __pci_bus_set_current_state(struct pci_bus *bus, pci_power_t state)
+{
+ if (bus)
+ pci_walk_bus(bus, __pci_dev_set_current_state, &state);
}
/**
@@ -707,8 +760,15 @@ static void __pci_start_power_transition(struct pci_dev *dev, pci_power_t state)
*/
int __pci_complete_power_transition(struct pci_dev *dev, pci_power_t state)
{
- return state >= PCI_D0 ?
- pci_platform_power_transition(dev, state) : -EINVAL;
+ int ret;
+
+ if (state < PCI_D0)
+ return -EINVAL;
+ ret = pci_platform_power_transition(dev, state);
+ /* Power off the bridge may power off the whole hierarchy */
+ if (!ret && state == PCI_D3cold)
+ __pci_bus_set_current_state(dev->subordinate, PCI_D3cold);
+ return ret;
}
EXPORT_SYMBOL_GPL(__pci_complete_power_transition);
@@ -732,8 +792,8 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
int error;
/* bound the state we're entering */
- if (state > PCI_D3hot)
- state = PCI_D3hot;
+ if (state > PCI_D3cold)
+ state = PCI_D3cold;
else if (state < PCI_D0)
state = PCI_D0;
else if ((state == PCI_D1 || state == PCI_D2) && pci_no_d1d2(dev))
@@ -748,10 +808,15 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
/* This device is quirked not to be put into D3, so
don't put it in D3 */
- if (state == PCI_D3hot && (dev->dev_flags & PCI_DEV_FLAGS_NO_D3))
+ if (state >= PCI_D3hot && (dev->dev_flags & PCI_DEV_FLAGS_NO_D3))
return 0;
- error = pci_raw_set_power_state(dev, state);
+ /*
+ * To put device in D3cold, we put device into D3hot in native
+ * way, then put device into D3cold with platform ops
+ */
+ error = pci_raw_set_power_state(dev, state > PCI_D3hot ?
+ PCI_D3hot : state);
if (!__pci_complete_power_transition(dev, state))
error = 0;
@@ -1498,6 +1563,28 @@ void pci_pme_wakeup_bus(struct pci_bus *bus)
}
/**
+ * pci_wakeup - Wake up a PCI device
+ * @dev: Device to handle.
+ * @ign: ignored parameter
+ */
+static int pci_wakeup(struct pci_dev *pci_dev, void *ign)
+{
+ pci_wakeup_event(pci_dev);
+ pm_request_resume(&pci_dev->dev);
+ return 0;
+}
+
+/**
+ * pci_wakeup_bus - Walk given bus and wake up devices on it
+ * @bus: Top bus of the subtree to walk.
+ */
+void pci_wakeup_bus(struct pci_bus *bus)
+{
+ if (bus)
+ pci_walk_bus(bus, pci_wakeup, NULL);
+}
+
+/**
* pci_pme_capable - check the capability of PCI device to generate PME#
* @dev: PCI device to handle.
* @state: PCI state from which device will issue PME#.
@@ -1754,6 +1841,10 @@ int pci_prepare_to_sleep(struct pci_dev *dev)
if (target_state == PCI_POWER_ERROR)
return -EIO;
+ /* D3cold during system suspend/hibernate is not supported */
+ if (target_state > PCI_D3hot)
+ target_state = PCI_D3hot;
+
pci_enable_wake(dev, target_state, device_may_wakeup(&dev->dev));
error = pci_set_power_state(dev, target_state);
@@ -1791,12 +1882,16 @@ int pci_finish_runtime_suspend(struct pci_dev *dev)
if (target_state == PCI_POWER_ERROR)
return -EIO;
+ dev->runtime_d3cold = target_state == PCI_D3cold;
+
__pci_enable_wake(dev, target_state, true, pci_dev_run_wake(dev));
error = pci_set_power_state(dev, target_state);
- if (error)
+ if (error) {
__pci_enable_wake(dev, target_state, true, false);
+ dev->runtime_d3cold = false;
+ }
return error;
}
@@ -1866,6 +1961,7 @@ void pci_pm_init(struct pci_dev *dev)
dev->pm_cap = pm;
dev->d3_delay = PCI_PM_D3_WAIT;
+ dev->d3cold_delay = PCI_PM_D3COLD_WAIT;
dev->d1_support = false;
dev->d2_support = false;