diff options
Diffstat (limited to 'drivers/regulator')
-rw-r--r-- | drivers/regulator/Kconfig | 2 | ||||
-rw-r--r-- | drivers/regulator/Makefile | 1 | ||||
-rw-r--r-- | drivers/regulator/axp20x-regulator.c | 94 | ||||
-rw-r--r-- | drivers/regulator/da9211-regulator.c | 14 | ||||
-rw-r--r-- | drivers/regulator/da9211-regulator.h | 2 | ||||
-rw-r--r-- | drivers/regulator/fixed-helper.c | 1 | ||||
-rw-r--r-- | drivers/regulator/qcom_spmi-regulator.c | 48 | ||||
-rw-r--r-- | drivers/regulator/rn5t618-regulator.c | 2 | ||||
-rw-r--r-- | drivers/regulator/tps65218-regulator.c | 2 |
9 files changed, 147 insertions, 19 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 0fd6195601ba..96cd55f9e3c5 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -244,7 +244,7 @@ config REGULATOR_DA9210 interface. config REGULATOR_DA9211 - tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9214/DA9215 regulator" + tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9223/DA9214/DA9224/DA9215/DA9225 regulator" depends on I2C select REGMAP_I2C help diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index cbb6e45c77b2..80ffc57a9ca3 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 # # Makefile for regulator drivers. # diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c index f18b36dd57dd..181622b2813d 100644 --- a/drivers/regulator/axp20x-regulator.c +++ b/drivers/regulator/axp20x-regulator.c @@ -244,6 +244,7 @@ static const struct regulator_desc axp22x_drivevbus_regulator = { .ops = &axp20x_ops_sw, }; +/* DCDC ranges shared with AXP813 */ static const struct regulator_linear_range axp803_dcdc234_ranges[] = { REGULATOR_LINEAR_RANGE(500000, 0x0, 0x46, 10000), REGULATOR_LINEAR_RANGE(1220000, 0x47, 0x4b, 20000), @@ -426,6 +427,69 @@ static const struct regulator_desc axp809_regulators[] = { AXP_DESC_SW(AXP809, SW, "sw", "swin", AXP22X_PWR_OUT_CTRL2, BIT(6)), }; +static const struct regulator_desc axp813_regulators[] = { + AXP_DESC(AXP813, DCDC1, "dcdc1", "vin1", 1600, 3400, 100, + AXP803_DCDC1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(0)), + AXP_DESC_RANGES(AXP813, DCDC2, "dcdc2", "vin2", axp803_dcdc234_ranges, + 76, AXP803_DCDC2_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1, + BIT(1)), + AXP_DESC_RANGES(AXP813, DCDC3, "dcdc3", "vin3", axp803_dcdc234_ranges, + 76, AXP803_DCDC3_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1, + BIT(2)), + AXP_DESC_RANGES(AXP813, DCDC4, "dcdc4", "vin4", axp803_dcdc234_ranges, + 76, AXP803_DCDC4_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1, + BIT(3)), + AXP_DESC_RANGES(AXP813, DCDC5, "dcdc5", "vin5", axp803_dcdc5_ranges, + 68, AXP803_DCDC5_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1, + BIT(4)), + AXP_DESC_RANGES(AXP813, DCDC6, "dcdc6", "vin6", axp803_dcdc6_ranges, + 72, AXP803_DCDC6_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1, + BIT(5)), + AXP_DESC_RANGES(AXP813, DCDC7, "dcdc7", "vin7", axp803_dcdc6_ranges, + 72, AXP813_DCDC7_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1, + BIT(6)), + AXP_DESC(AXP813, ALDO1, "aldo1", "aldoin", 700, 3300, 100, + AXP22X_ALDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(5)), + AXP_DESC(AXP813, ALDO2, "aldo2", "aldoin", 700, 3300, 100, + AXP22X_ALDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(6)), + AXP_DESC(AXP813, ALDO3, "aldo3", "aldoin", 700, 3300, 100, + AXP22X_ALDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(7)), + AXP_DESC(AXP813, DLDO1, "dldo1", "dldoin", 700, 3300, 100, + AXP22X_DLDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(3)), + AXP_DESC_RANGES(AXP813, DLDO2, "dldo2", "dldoin", axp803_dldo2_ranges, + 32, AXP22X_DLDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, + BIT(4)), + AXP_DESC(AXP813, DLDO3, "dldo3", "dldoin", 700, 3300, 100, + AXP22X_DLDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(5)), + AXP_DESC(AXP813, DLDO4, "dldo4", "dldoin", 700, 3300, 100, + AXP22X_DLDO4_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(6)), + AXP_DESC(AXP813, ELDO1, "eldo1", "eldoin", 700, 1900, 50, + AXP22X_ELDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(0)), + AXP_DESC(AXP813, ELDO2, "eldo2", "eldoin", 700, 1900, 50, + AXP22X_ELDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(1)), + AXP_DESC(AXP813, ELDO3, "eldo3", "eldoin", 700, 1900, 50, + AXP22X_ELDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(2)), + /* to do / check ... */ + AXP_DESC(AXP813, FLDO1, "fldo1", "fldoin", 700, 1450, 50, + AXP803_FLDO1_V_OUT, 0x0f, AXP22X_PWR_OUT_CTRL3, BIT(2)), + AXP_DESC(AXP813, FLDO2, "fldo2", "fldoin", 700, 1450, 50, + AXP803_FLDO2_V_OUT, 0x0f, AXP22X_PWR_OUT_CTRL3, BIT(3)), + /* + * TODO: FLDO3 = {DCDC5, FLDOIN} / 2 + * + * This means FLDO3 effectively switches supplies at runtime, + * something the regulator subsystem does not support. + */ + AXP_DESC_FIXED(AXP813, RTC_LDO, "rtc-ldo", "ips", 1800), + AXP_DESC_IO(AXP813, LDO_IO0, "ldo-io0", "ips", 700, 3300, 100, + AXP22X_LDO_IO0_V_OUT, 0x1f, AXP20X_GPIO0_CTRL, 0x07, + AXP22X_IO_ENABLED, AXP22X_IO_DISABLED), + AXP_DESC_IO(AXP813, LDO_IO1, "ldo-io1", "ips", 700, 3300, 100, + AXP22X_LDO_IO1_V_OUT, 0x1f, AXP20X_GPIO1_CTRL, 0x07, + AXP22X_IO_ENABLED, AXP22X_IO_DISABLED), + AXP_DESC_SW(AXP813, SW, "sw", "swin", AXP22X_PWR_OUT_CTRL2, BIT(7)), +}; + static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq) { struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); @@ -441,9 +505,10 @@ static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq) step = 75; break; case AXP803_ID: + case AXP813_ID: /* - * AXP803 DCDC work frequency setting has the same range and - * step as AXP22X, but at a different register. + * AXP803/AXP813 DCDC work frequency setting has the same + * range and step as AXP22X, but at a different register. * Fall through to the check below. * (See include/linux/mfd/axp20x.h) */ @@ -561,6 +626,14 @@ static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 work workmode <<= id - AXP803_DCDC1; break; + case AXP813_ID: + if (id < AXP813_DCDC1 || id > AXP813_DCDC7) + return -EINVAL; + + mask = AXP22X_WORKMODE_DCDCX_MASK(id - AXP813_DCDC1); + workmode <<= id - AXP813_DCDC1; + break; + default: /* should not happen */ WARN_ON(1); @@ -579,18 +652,19 @@ static bool axp20x_is_polyphase_slave(struct axp20x_dev *axp20x, int id) u32 reg = 0; /* - * Currently in our supported AXP variants, only AXP803 and AXP806 - * have polyphase regulators. + * Currently in our supported AXP variants, only AXP803, AXP806, + * and AXP813 have polyphase regulators. */ switch (axp20x->variant) { case AXP803_ID: + case AXP813_ID: regmap_read(axp20x->regmap, AXP803_POLYPHASE_CTRL, ®); switch (id) { case AXP803_DCDC3: return !!(reg & BIT(6)); case AXP803_DCDC6: - return !!(reg & BIT(7)); + return !!(reg & BIT(5)); } break; @@ -656,6 +730,12 @@ static int axp20x_regulator_probe(struct platform_device *pdev) regulators = axp809_regulators; nregulators = AXP809_REG_ID_MAX; break; + case AXP813_ID: + regulators = axp813_regulators; + nregulators = AXP813_REG_ID_MAX; + drivevbus = of_property_read_bool(pdev->dev.parent->of_node, + "x-powers,drive-vbus-en"); + break; default: dev_err(&pdev->dev, "Unsupported AXP variant: %ld\n", axp20x->variant); @@ -677,6 +757,10 @@ static int axp20x_regulator_probe(struct platform_device *pdev) if (axp20x_is_polyphase_slave(axp20x, i)) continue; + /* Support for AXP813's FLDO3 is not implemented */ + if (axp20x->variant == AXP813_ID && i == AXP813_FLDO3) + continue; + /* * Regulators DC1SW and DC5LDO are connected internally, * so we have to handle their supply names separately. diff --git a/drivers/regulator/da9211-regulator.c b/drivers/regulator/da9211-regulator.c index aa47280efd32..9b8f47617724 100644 --- a/drivers/regulator/da9211-regulator.c +++ b/drivers/regulator/da9211-regulator.c @@ -1,6 +1,6 @@ /* * da9211-regulator.c - Regulator device driver for DA9211/DA9212 - * /DA9213/DA9214/DA9215 + * /DA9213/DA9223/DA9214/DA9224/DA9215/DA9225 * Copyright (C) 2015 Dialog Semiconductor Ltd. * * This library is free software; you can redistribute it and/or @@ -496,8 +496,11 @@ static const struct i2c_device_id da9211_i2c_id[] = { {"da9211", DA9211}, {"da9212", DA9212}, {"da9213", DA9213}, + {"da9223", DA9223}, {"da9214", DA9214}, + {"da9224", DA9224}, {"da9215", DA9215}, + {"da9225", DA9225}, {}, }; MODULE_DEVICE_TABLE(i2c, da9211_i2c_id); @@ -507,8 +510,11 @@ static const struct of_device_id da9211_dt_ids[] = { { .compatible = "dlg,da9211", .data = &da9211_i2c_id[0] }, { .compatible = "dlg,da9212", .data = &da9211_i2c_id[1] }, { .compatible = "dlg,da9213", .data = &da9211_i2c_id[2] }, - { .compatible = "dlg,da9214", .data = &da9211_i2c_id[3] }, - { .compatible = "dlg,da9215", .data = &da9211_i2c_id[4] }, + { .compatible = "dlg,da9223", .data = &da9211_i2c_id[3] }, + { .compatible = "dlg,da9214", .data = &da9211_i2c_id[4] }, + { .compatible = "dlg,da9224", .data = &da9211_i2c_id[5] }, + { .compatible = "dlg,da9215", .data = &da9211_i2c_id[6] }, + { .compatible = "dlg,da9225", .data = &da9211_i2c_id[7] }, {}, }; MODULE_DEVICE_TABLE(of, da9211_dt_ids); @@ -526,5 +532,5 @@ static struct i2c_driver da9211_regulator_driver = { module_i2c_driver(da9211_regulator_driver); MODULE_AUTHOR("James Ban <James.Ban.opensource@diasemi.com>"); -MODULE_DESCRIPTION("DA9211/DA9212/DA9213/DA9214/DA9215 regulator driver"); +MODULE_DESCRIPTION("DA9211/DA9212/DA9213/DA9223/DA9214/DA9224/DA9215/DA9225 regulator driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/regulator/da9211-regulator.h b/drivers/regulator/da9211-regulator.h index b841bbf330cc..2cb32aab4f82 100644 --- a/drivers/regulator/da9211-regulator.h +++ b/drivers/regulator/da9211-regulator.h @@ -1,6 +1,6 @@ /* * da9211-regulator.h - Regulator definitions for DA9211/DA9212 - * /DA9213/DA9214/DA9215 + * /DA9213/DA9223/DA9214/DA9224/DA9215/DA9225 * Copyright (C) 2015 Dialog Semiconductor Ltd. * * This program is free software; you can redistribute it and/or diff --git a/drivers/regulator/fixed-helper.c b/drivers/regulator/fixed-helper.c index f9d027992aae..777fac6fb4cb 100644 --- a/drivers/regulator/fixed-helper.c +++ b/drivers/regulator/fixed-helper.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 #include <linux/slab.h> #include <linux/string.h> #include <linux/platform_device.h> diff --git a/drivers/regulator/qcom_spmi-regulator.c b/drivers/regulator/qcom_spmi-regulator.c index 16c5f84e06a7..0241ada47d04 100644 --- a/drivers/regulator/qcom_spmi-regulator.c +++ b/drivers/regulator/qcom_spmi-regulator.c @@ -593,13 +593,20 @@ static int spmi_sw_selector_to_hw(struct spmi_regulator *vreg, u8 *voltage_sel) { const struct spmi_voltage_range *range, *end; + unsigned offset; range = vreg->set_points->range; end = range + vreg->set_points->count; for (; range < end; range++) { if (selector < range->n_voltages) { - *voltage_sel = selector; + /* + * hardware selectors between set point min and real + * min are invalid so we ignore them + */ + offset = range->set_point_min_uV - range->min_uV; + offset /= range->step_uV; + *voltage_sel = selector + offset; *range_sel = range->range_sel; return 0; } @@ -613,15 +620,35 @@ static int spmi_sw_selector_to_hw(struct spmi_regulator *vreg, static int spmi_hw_selector_to_sw(struct spmi_regulator *vreg, u8 hw_sel, const struct spmi_voltage_range *range) { - int sw_sel = hw_sel; + unsigned sw_sel = 0; + unsigned offset, max_hw_sel; const struct spmi_voltage_range *r = vreg->set_points->range; - - while (r != range) { + const struct spmi_voltage_range *end = r + vreg->set_points->count; + + for (; r < end; r++) { + if (r == range && range->n_voltages) { + /* + * hardware selectors between set point min and real + * min and between set point max and real max are + * invalid so we return an error if they're + * programmed into the hardware + */ + offset = range->set_point_min_uV - range->min_uV; + offset /= range->step_uV; + if (hw_sel < offset) + return -EINVAL; + + max_hw_sel = range->set_point_max_uV - range->min_uV; + max_hw_sel /= range->step_uV; + if (hw_sel > max_hw_sel) + return -EINVAL; + + return sw_sel + hw_sel - offset; + } sw_sel += r->n_voltages; - r++; } - return sw_sel; + return -EINVAL; } static const struct spmi_voltage_range * @@ -1619,11 +1646,20 @@ static const struct spmi_regulator_data pm8994_regulators[] = { { } }; +static const struct spmi_regulator_data pmi8994_regulators[] = { + { "s1", 0x1400, "vdd_s1", }, + { "s2", 0x1700, "vdd_s2", }, + { "s3", 0x1a00, "vdd_s3", }, + { "l1", 0x4000, "vdd_l1", }, + { } +}; + static const struct of_device_id qcom_spmi_regulator_match[] = { { .compatible = "qcom,pm8841-regulators", .data = &pm8841_regulators }, { .compatible = "qcom,pm8916-regulators", .data = &pm8916_regulators }, { .compatible = "qcom,pm8941-regulators", .data = &pm8941_regulators }, { .compatible = "qcom,pm8994-regulators", .data = &pm8994_regulators }, + { .compatible = "qcom,pmi8994-regulators", .data = &pmi8994_regulators }, { } }; MODULE_DEVICE_TABLE(of, qcom_spmi_regulator_match); diff --git a/drivers/regulator/rn5t618-regulator.c b/drivers/regulator/rn5t618-regulator.c index ef2be56460fe..790a4a73ea2c 100644 --- a/drivers/regulator/rn5t618-regulator.c +++ b/drivers/regulator/rn5t618-regulator.c @@ -29,7 +29,7 @@ static const struct regulator_ops rn5t618_reg_ops = { }; #define REG(rid, ereg, emask, vreg, vmask, min, max, step) \ - [RN5T618_##rid] = { \ + { \ .name = #rid, \ .of_match = of_match_ptr(#rid), \ .regulators_node = of_match_ptr("regulators"), \ diff --git a/drivers/regulator/tps65218-regulator.c b/drivers/regulator/tps65218-regulator.c index 9aafbb03482d..bc489958fed7 100644 --- a/drivers/regulator/tps65218-regulator.c +++ b/drivers/regulator/tps65218-regulator.c @@ -154,7 +154,7 @@ static int tps65218_pmic_set_suspend_disable(struct regulator_dev *dev) if (!tps->strobes[rid]) { if (rid == TPS65218_DCDC_3) - tps->info[rid]->strobe = 3; + tps->strobes[rid] = 3; else return -EINVAL; } |