diff options
Diffstat (limited to 'drivers/scsi/Kconfig')
| -rw-r--r-- | drivers/scsi/Kconfig | 80 |
1 files changed, 40 insertions, 40 deletions
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 2017c43dac1b..e9ff4cd5fbe9 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -11,7 +11,7 @@ config RAID_ATTRS default n depends on BLOCK depends on SCSI_MOD - ---help--- + help Provides RAID config SCSI @@ -20,7 +20,7 @@ config SCSI select SCSI_DMA if HAS_DMA select SG_POOL select BLK_SCSI_REQUEST - ---help--- + help If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or any other SCSI device under Linux, say Y and make sure that you know the name of your SCSI host adapter (the card inside your computer @@ -55,7 +55,7 @@ config SCSI_PROC_FS bool "legacy /proc/scsi/ support" depends on SCSI && PROC_FS default y - ---help--- + help This option enables support for the various files in /proc/scsi. In Linux 2.6 this has been superseded by files in sysfs but many legacy applications rely on this. @@ -69,7 +69,7 @@ config BLK_DEV_SD tristate "SCSI disk support" depends on SCSI select BLK_DEV_INTEGRITY_T10 if BLK_DEV_INTEGRITY - ---help--- + help If you want to use SCSI hard disks, Fibre Channel disks, Serial ATA (SATA) or Parallel ATA (PATA) hard disks, USB storage or the SCSI or parallel port version of @@ -90,7 +90,7 @@ config BLK_DEV_SD config CHR_DEV_ST tristate "SCSI tape support" depends on SCSI - ---help--- + help If you want to use a SCSI tape drive under Linux, say Y and read the SCSI-HOWTO, available from <http://www.tldp.org/docs.html#howto>, and @@ -104,7 +104,7 @@ config BLK_DEV_SR tristate "SCSI CDROM support" depends on SCSI && BLK_DEV select CDROM - ---help--- + help If you want to use a CD or DVD drive attached to your computer by SCSI, FireWire, USB or ATAPI, say Y and read the SCSI-HOWTO and the CDROM-HOWTO at <http://www.tldp.org/docs.html#howto>. @@ -118,7 +118,7 @@ config BLK_DEV_SR config CHR_DEV_SG tristate "SCSI generic support" depends on SCSI - ---help--- + help If you want to use SCSI scanners, synthesizers or CD-writers or just about anything having "SCSI" in its name other than hard disks, CD-ROMs or tapes, say Y here. These won't be supported by the kernel @@ -143,7 +143,7 @@ config CHR_DEV_SG config CHR_DEV_SCH tristate "SCSI media changer support" depends on SCSI - ---help--- + help This is a driver for SCSI media changers. Most common devices are tape libraries and MOD/CDROM jukeboxes. *Real* jukeboxes, you don't need this for those tiny 6-slot cdrom changers. Media @@ -178,7 +178,7 @@ config SCSI_CONSTANTS config SCSI_LOGGING bool "SCSI logging facility" depends on SCSI - ---help--- + help This turns on a logging facility that can be used to debug a number of SCSI related problems. @@ -376,7 +376,7 @@ config SCSI_AHA152X depends on ISA && SCSI select SCSI_SPI_ATTRS select CHECK_SIGNATURE - ---help--- + help This is a driver for the AHA-1510, AHA-1520, AHA-1522, and AHA-2825 SCSI host adapters. It also works for the AVA-1505, but the IRQ etc. must be manually specified in this case. @@ -391,7 +391,7 @@ config SCSI_AHA152X config SCSI_AHA1542 tristate "Adaptec AHA1542 support" depends on ISA && SCSI && ISA_DMA_API - ---help--- + help This is support for a SCSI host adapter. It is explained in section 3.4 of the SCSI-HOWTO, available from <http://www.tldp.org/docs.html#howto>. Note that Trantor was @@ -405,7 +405,7 @@ config SCSI_AHA1542 config SCSI_AHA1740 tristate "Adaptec AHA1740 support" depends on EISA && SCSI - ---help--- + help This is support for a SCSI host adapter. It is explained in section 3.5 of the SCSI-HOWTO, available from <http://www.tldp.org/docs.html#howto>. If it doesn't work out @@ -498,7 +498,7 @@ config SCSI_HPTIOP config SCSI_BUSLOGIC tristate "BusLogic SCSI support" depends on (PCI || ISA) && SCSI && ISA_DMA_API && VIRT_TO_BUS - ---help--- + help This is support for BusLogic MultiMaster and FlashPoint SCSI Host Adapters. Consult the SCSI-HOWTO, available from <http://www.tldp.org/docs.html#howto>, and the files @@ -580,20 +580,20 @@ config LIBFC tristate "LibFC module" depends on SCSI_FC_ATTRS select CRC32 - ---help--- + help Fibre Channel library module config LIBFCOE tristate "LibFCoE module" depends on LIBFC - ---help--- + help Library for Fibre Channel over Ethernet module config FCOE tristate "FCoE module" depends on PCI depends on LIBFCOE - ---help--- + help Fibre Channel over Ethernet module config FCOE_FNIC @@ -672,7 +672,7 @@ config SCSI_FDOMAIN_ISA config SCSI_GDTH tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support" depends on PCI && SCSI - ---help--- + help Formerly called GDT SCSI Disk Array Controller Support. This is a driver for RAID/SCSI Disk Array Controllers (EISA/ISA/PCI) @@ -688,7 +688,7 @@ config SCSI_ISCI depends on PCI && SCSI depends on X86 select SCSI_SAS_LIBSAS - ---help--- + help This driver supports the 6Gb/s SAS capabilities of the storage control unit found in the Intel(R) C600 series chipset. @@ -696,7 +696,7 @@ config SCSI_GENERIC_NCR5380 tristate "Generic NCR5380/53c400 SCSI ISA card support" depends on ISA && SCSI && HAS_IOPORT_MAP select SCSI_SPI_ATTRS - ---help--- + help This is a driver for old ISA card SCSI controllers based on a NCR 5380, 53C80, 53C400, 53C400A, or DTC 436 device. Most boards such as the Trantor T130 fit this category, as do @@ -708,7 +708,7 @@ config SCSI_GENERIC_NCR5380 config SCSI_IPS tristate "IBM ServeRAID support" depends on PCI && SCSI - ---help--- + help This is support for the IBM ServeRAID hardware RAID controllers. See <http://www.developer.ibm.com/welcome/netfinity/serveraid.html> and <http://www-947.ibm.com/support/entry/portal/docdisplay?brand=5000008&lndocid=SERV-RAID> @@ -790,7 +790,7 @@ config SCSI_INIA100 config SCSI_PPA tristate "IOMEGA parallel port (ppa - older drives)" depends on SCSI && PARPORT_PC - ---help--- + help This driver supports older versions of IOMEGA's parallel port ZIP drive (a 100 MB removable media device). @@ -817,7 +817,7 @@ config SCSI_PPA config SCSI_IMM tristate "IOMEGA parallel port (imm - newer drives)" depends on SCSI && PARPORT_PC - ---help--- + help This driver supports newer versions of IOMEGA's parallel port ZIP drive (a 100 MB removable media device). @@ -844,7 +844,7 @@ config SCSI_IMM config SCSI_IZIP_EPP16 bool "ppa/imm option - Use slow (but safe) EPP-16" depends on SCSI_PPA || SCSI_IMM - ---help--- + help EPP (Enhanced Parallel Port) is a standard for parallel ports which allows them to act as expansion buses that can handle up to 64 peripheral devices. @@ -896,7 +896,7 @@ config 53C700_LE_ON_BE config SCSI_STEX tristate "Promise SuperTrak EX Series support" depends on PCI && SCSI - ---help--- + help This driver supports Promise SuperTrak EX series storage controllers. Promise provides Linux RAID configuration utility for these @@ -914,7 +914,7 @@ config SCSI_SYM53C8XX_2 tristate "SYM53C8XX Version 2 SCSI support" depends on PCI && SCSI select SCSI_SPI_ATTRS - ---help--- + help This driver supports the whole NCR53C8XX/SYM53C8XX family of PCI-SCSI controllers. It also supports the subset of LSI53C10XX Ultra-160 controllers that are based on the SYM53C8XX SCRIPTS @@ -928,7 +928,7 @@ config SCSI_SYM53C8XX_DMA_ADDRESSING_MODE int "DMA addressing mode" depends on SCSI_SYM53C8XX_2 default "1" - ---help--- + help This option only applies to PCI-SCSI chips that are PCI DAC capable (875A, 895A, 896, 1010-33, 1010-66, 1000). @@ -984,7 +984,7 @@ config SCSI_IPR select FW_LOADER select IRQ_POLL select SGL_ALLOC - ---help--- + help This driver supports the IBM Power Linux family RAID adapters. This includes IBM pSeries 5712, 5703, 5709, and 570A, as well as IBM iSeries 5702, 5703, 5709, and 570A. @@ -1022,7 +1022,7 @@ config SCSI_NCR53C8XX_DEFAULT_TAGS int "default tagged command queue depth" depends on SCSI_ZALON default "8" - ---help--- + help "Tagged command queuing" is a feature of SCSI-2 which improves performance: the host adapter can send several SCSI commands to a device's queue even if previous commands haven't finished yet. @@ -1048,7 +1048,7 @@ config SCSI_NCR53C8XX_MAX_TAGS int "maximum number of queued commands" depends on SCSI_ZALON default "32" - ---help--- + help This option allows you to specify the maximum number of commands that can be queued to any device, when tagged command queuing is possible. The default value is 32. Minimum is 2, maximum is 64. @@ -1065,7 +1065,7 @@ config SCSI_NCR53C8XX_SYNC int "synchronous transfers frequency in MHz" depends on SCSI_ZALON default "20" - ---help--- + help The SCSI Parallel Interface-2 Standard defines 5 classes of transfer rates: FAST-5, FAST-10, FAST-20, FAST-40 and FAST-80. The numbers are respectively the maximum data transfer rates in mega-transfers @@ -1108,7 +1108,7 @@ config SCSI_NCR53C8XX_NO_DISCONNECT config SCSI_QLOGIC_FAS tristate "Qlogic FAS SCSI support" depends on ISA && SCSI - ---help--- + help This is a driver for the ISA, VLB, and PCMCIA versions of the Qlogic FastSCSI! cards as well as any other card based on the FASXX chip (including the Control Concepts SCSI/IDE/SIO/PIO/FDC cards). @@ -1158,14 +1158,14 @@ config SCSI_LPFC depends on NVME_TARGET_FC || NVME_TARGET_FC=n depends on NVME_FC || NVME_FC=n select CRC_T10DIF - ---help--- + help This lpfc driver supports the Emulex LightPulse Family of Fibre Channel PCI host adapters. config SCSI_LPFC_DEBUG_FS bool "Emulex LightPulse Fibre Channel debugfs Support" depends on SCSI_LPFC && DEBUG_FS - ---help--- + help This makes debugging information from the lpfc driver available via the debugfs filesystem. @@ -1173,7 +1173,7 @@ config SCSI_SIM710 tristate "Simple 53c710 SCSI support (Compaq, NCR machines)" depends on EISA && SCSI select SCSI_SPI_ATTRS - ---help--- + help This driver is for NCR53c710 based SCSI host adapters. It currently supports Compaq EISA cards. @@ -1181,7 +1181,7 @@ config SCSI_SIM710 config SCSI_DC395x tristate "Tekram DC395(U/UW/F) and DC315(U) SCSI support" depends on PCI && SCSI - ---help--- + help This driver supports PCI SCSI host adapters based on the ASIC TRM-S1040 chip, e.g Tekram DC395(U/UW/F) and DC315(U) variants. @@ -1197,7 +1197,7 @@ config SCSI_AM53C974 tristate "Tekram DC390(T) and Am53/79C974 SCSI support (new driver)" depends on PCI && SCSI select SCSI_SPI_ATTRS - ---help--- + help This driver supports PCI SCSI host adapters based on the Am53C974A chip, e.g. Tekram DC390(T), DawiControl 2974 and some onboard PCscsi/PCnet (Am53/79C974) solutions. @@ -1224,7 +1224,7 @@ config SCSI_WD719X tristate "Western Digital WD7193/7197/7296 support" depends on PCI && SCSI select EEPROM_93CX6 - ---help--- + help This is a driver for Western Digital WD7193, WD7197 and WD7296 PCI SCSI controllers (based on WD33C296A chip). @@ -1318,7 +1318,7 @@ config A2091_SCSI config GVP11_SCSI tristate "GVP Series II WD33C93A support" depends on ZORRO && SCSI - ---help--- + help If you have a Great Valley Products Series II SCSI controller, answer Y. Also say Y if you have a later model of GVP SCSI controller (such as the GVP A4008 or a Combo board). Otherwise, @@ -1374,7 +1374,7 @@ config ATARI_SCSI tristate "Atari native SCSI support" depends on ATARI && SCSI select SCSI_SPI_ATTRS - ---help--- + help If you have an Atari with built-in NCR5380 SCSI controller (TT, Falcon, ...) say Y to get it supported. Of course also, if you have a compatible SCSI controller (e.g. for Medusa). @@ -1486,7 +1486,7 @@ config SCSI_PMCRAID tristate "PMC SIERRA Linux MaxRAID adapter support" depends on PCI && SCSI && NET select SGL_ALLOC - ---help--- + help This driver supports the PMC SIERRA MaxRAID adapters. config SCSI_PM8001 |