diff options
Diffstat (limited to 'drivers/scsi')
| -rw-r--r-- | drivers/scsi/Kconfig | 18 | ||||
| -rw-r--r-- | drivers/scsi/Makefile | 1 | ||||
| -rw-r--r-- | drivers/scsi/am53c974.c | 537 |
3 files changed, 556 insertions, 0 deletions
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 60c67e11d422..519c3ef72fd5 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -1357,6 +1357,24 @@ config SCSI_DC390T To compile this driver as a module, choose M here: the module will be called tmscsim. +config SCSI_AM53C974 + tristate "Tekram DC390(T) and Am53/79C974 SCSI support (new driver)" + depends on PCI && SCSI + select SCSI_SPI_ATTRS + ---help--- + This driver supports PCI SCSI host adapters based on the Am53C974A + chip, e.g. Tekram DC390(T), DawiControl 2974 and some onboard + PCscsi/PCnet (Am53/79C974) solutions. + This is a new implementation base on the generic esp_scsi driver. + + Documentation can be found in <file:Documentation/scsi/tmscsim.txt>. + + Note that this driver does NOT support Tekram DC390W/U/F, which are + based on NCR/Symbios chips. Use "NCR53C8XX SCSI support" for those. + + To compile this driver as a module, choose M here: the + module will be called am53c974. + config SCSI_T128 tristate "Trantor T128/T128F/T228 SCSI support" depends on ISA && SCSI diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 59f1ce6df2d6..79a6571e33f9 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -101,6 +101,7 @@ obj-$(CONFIG_SCSI_7000FASST) += wd7000.o obj-$(CONFIG_SCSI_EATA) += eata.o obj-$(CONFIG_SCSI_DC395x) += dc395x.o obj-$(CONFIG_SCSI_DC390T) += tmscsim.o +obj-$(CONFIG_SCSI_AM53C974) += esp_scsi.o am53c974.o obj-$(CONFIG_MEGARAID_LEGACY) += megaraid.o obj-$(CONFIG_MEGARAID_NEWGEN) += megaraid/ obj-$(CONFIG_MEGARAID_SAS) += megaraid/ diff --git a/drivers/scsi/am53c974.c b/drivers/scsi/am53c974.c new file mode 100644 index 000000000000..a16c9cf0f0a2 --- /dev/null +++ b/drivers/scsi/am53c974.c @@ -0,0 +1,537 @@ +/* + * AMD am53c974 driver. + * Copyright (c) 2014 Hannes Reinecke, SUSE Linux GmbH + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pci.h> +#include <linux/interrupt.h> + +#include <scsi/scsi_host.h> + +#include "esp_scsi.h" + +#define DRV_MODULE_NAME "am53c974" +#define DRV_MODULE_VERSION "1.00" + +static bool am53c974_debug; + +#define esp_dma_log(f, a...) \ + do { \ + if (am53c974_debug) \ + shost_printk(KERN_DEBUG, esp->host, f, ##a); \ + } while (0) + +#define ESP_DMA_CMD 0x10 +#define ESP_DMA_STC 0x11 +#define ESP_DMA_SPA 0x12 +#define ESP_DMA_WBC 0x13 +#define ESP_DMA_WAC 0x14 +#define ESP_DMA_STATUS 0x15 +#define ESP_DMA_SMDLA 0x16 +#define ESP_DMA_WMAC 0x17 + +#define ESP_DMA_CMD_IDLE 0x00 +#define ESP_DMA_CMD_BLAST 0x01 +#define ESP_DMA_CMD_ABORT 0x02 +#define ESP_DMA_CMD_START 0x03 +#define ESP_DMA_CMD_MASK 0x03 +#define ESP_DMA_CMD_DIAG 0x04 +#define ESP_DMA_CMD_MDL 0x10 +#define ESP_DMA_CMD_INTE_P 0x20 +#define ESP_DMA_CMD_INTE_D 0x40 +#define ESP_DMA_CMD_DIR 0x80 + +#define ESP_DMA_STAT_PWDN 0x01 +#define ESP_DMA_STAT_ERROR 0x02 +#define ESP_DMA_STAT_ABORT 0x04 +#define ESP_DMA_STAT_DONE 0x08 +#define ESP_DMA_STAT_SCSIINT 0x10 +#define ESP_DMA_STAT_BCMPLT 0x20 + +/* EEPROM is accessed with 16-bit values */ +#define DC390_EEPROM_READ 0x80 +#define DC390_EEPROM_LEN 0x40 + +/* + * DC390 EEPROM + * + * 8 * 4 bytes of per-device options + * followed by HBA specific options + */ + +/* Per-device options */ +#define DC390_EE_MODE1 0x00 +#define DC390_EE_SPEED 0x01 + +/* HBA-specific options */ +#define DC390_EE_ADAPT_SCSI_ID 0x40 +#define DC390_EE_MODE2 0x41 +#define DC390_EE_DELAY 0x42 +#define DC390_EE_TAG_CMD_NUM 0x43 + +#define DC390_EE_MODE1_PARITY_CHK 0x01 +#define DC390_EE_MODE1_SYNC_NEGO 0x02 +#define DC390_EE_MODE1_EN_DISC 0x04 +#define DC390_EE_MODE1_SEND_START 0x08 +#define DC390_EE_MODE1_TCQ 0x10 + +#define DC390_EE_MODE2_MORE_2DRV 0x01 +#define DC390_EE_MODE2_GREATER_1G 0x02 +#define DC390_EE_MODE2_RST_SCSI_BUS 0x04 +#define DC390_EE_MODE2_ACTIVE_NEGATION 0x08 +#define DC390_EE_MODE2_NO_SEEK 0x10 +#define DC390_EE_MODE2_LUN_CHECK 0x20 + +struct pci_esp_priv { + struct esp *esp; + u8 dma_status; +}; + +static void pci_esp_dma_drain(struct esp *esp); + +static inline struct pci_esp_priv *pci_esp_get_priv(struct esp *esp) +{ + struct pci_dev *pdev = esp->dev; + + return pci_get_drvdata(pdev); +} + +static void pci_esp_write8(struct esp *esp, u8 val, unsigned long reg) +{ + iowrite8(val, esp->regs + (reg * 4UL)); +} + +static u8 pci_esp_read8(struct esp *esp, unsigned long reg) +{ + return ioread8(esp->regs + (reg * 4UL)); +} + +static void pci_esp_write32(struct esp *esp, u32 val, unsigned long reg) +{ + return iowrite32(val, esp->regs + (reg * 4UL)); +} + +static dma_addr_t pci_esp_map_single(struct esp *esp, void *buf, + size_t sz, int dir) +{ + return pci_map_single(esp->dev, buf, sz, dir); +} + +static int pci_esp_map_sg(struct esp *esp, struct scatterlist *sg, + int num_sg, int dir) +{ + return pci_map_sg(esp->dev, sg, num_sg, dir); +} + +static void pci_esp_unmap_single(struct esp *esp, dma_addr_t addr, + size_t sz, int dir) +{ + pci_unmap_single(esp->dev, addr, sz, dir); +} + +static void pci_esp_unmap_sg(struct esp *esp, struct scatterlist *sg, + int num_sg, int dir) +{ + pci_unmap_sg(esp->dev, sg, num_sg, dir); +} + +static int pci_esp_irq_pending(struct esp *esp) +{ + struct pci_esp_priv *pep = pci_esp_get_priv(esp); + + pep->dma_status = pci_esp_read8(esp, ESP_DMA_STATUS); + esp_dma_log("dma intr dreg[%02x]\n", pep->dma_status); + + if (pep->dma_status & (ESP_DMA_STAT_ERROR | + ESP_DMA_STAT_ABORT | + ESP_DMA_STAT_DONE | + ESP_DMA_STAT_SCSIINT)) + return 1; + + return 0; +} + +static void pci_esp_reset_dma(struct esp *esp) +{ + /* Nothing to do ? */ +} + +static void pci_esp_dma_drain(struct esp *esp) +{ + u8 resid; + int lim = 1000; + + + if ((esp->sreg & ESP_STAT_PMASK) == ESP_DOP || + (esp->sreg & ESP_STAT_PMASK) == ESP_DIP) + /* Data-In or Data-Out, nothing to be done */ + return; + + while (--lim > 0) { + resid = pci_esp_read8(esp, ESP_FFLAGS) & ESP_FF_FBYTES; + if (resid <= 1) + break; + cpu_relax(); + } + if (resid > 1) { + /* FIFO not cleared */ + shost_printk(KERN_INFO, esp->host, + "FIFO not cleared, %d bytes left\n", + resid); + } + + /* + * When there is a residual BCMPLT will never be set + * (obviously). But we still have to issue the BLAST + * command, otherwise the data will not being transferred. + * But we'll never know when the BLAST operation is + * finished. So check for some time and give up eventually. + */ + lim = 1000; + pci_esp_write8(esp, ESP_DMA_CMD_DIR | ESP_DMA_CMD_BLAST, ESP_DMA_CMD); + while (pci_esp_read8(esp, ESP_DMA_STATUS) & ESP_DMA_STAT_BCMPLT) { + if (--lim == 0) + break; + cpu_relax(); + } + pci_esp_write8(esp, ESP_DMA_CMD_DIR | ESP_DMA_CMD_IDLE, ESP_DMA_CMD); + esp_dma_log("DMA blast done (%d tries, %d bytes left)\n", lim, resid); +} + +static void pci_esp_dma_invalidate(struct esp *esp) +{ + struct pci_esp_priv *pep = pci_esp_get_priv(esp); + + esp_dma_log("invalidate DMA\n"); + + pci_esp_write8(esp, ESP_DMA_CMD_IDLE, ESP_DMA_CMD); + pep->dma_status = 0; +} + +static int pci_esp_dma_error(struct esp *esp) +{ + struct pci_esp_priv *pep = pci_esp_get_priv(esp); + + if (pep->dma_status & ESP_DMA_STAT_ERROR) { + u8 dma_cmd = pci_esp_read8(esp, ESP_DMA_CMD); + + if ((dma_cmd & ESP_DMA_CMD_MASK) == ESP_DMA_CMD_START) + pci_esp_write8(esp, ESP_DMA_CMD_ABORT, ESP_DMA_CMD); + + return 1; + } + if (pep->dma_status & ESP_DMA_STAT_ABORT) { + pci_esp_write8(esp, ESP_DMA_CMD_IDLE, ESP_DMA_CMD); + pep->dma_status = pci_esp_read8(esp, ESP_DMA_CMD); + return 1; + } + return 0; +} + +static void pci_esp_send_dma_cmd(struct esp *esp, u32 addr, u32 esp_count, + u32 dma_count, int write, u8 cmd) +{ + struct pci_esp_priv *pep = pci_esp_get_priv(esp); + u32 val = 0; + + BUG_ON(!(cmd & ESP_CMD_DMA)); + + pep->dma_status = 0; + + /* Set DMA engine to IDLE */ + if (write) + /* DMA write direction logic is inverted */ + val |= ESP_DMA_CMD_DIR; + pci_esp_write8(esp, ESP_DMA_CMD_IDLE | val, ESP_DMA_CMD); + + pci_esp_write8(esp, (esp_count >> 0) & 0xff, ESP_TCLOW); + pci_esp_write8(esp, (esp_count >> 8) & 0xff, ESP_TCMED); + + pci_esp_write32(esp, esp_count, ESP_DMA_STC); + pci_esp_write32(esp, addr, ESP_DMA_SPA); + + esp_dma_log("start dma addr[%x] count[%d:%d]\n", + addr, esp_count, dma_count); + + scsi_esp_cmd(esp, cmd); + /* Send DMA Start command */ + pci_esp_write8(esp, ESP_DMA_CMD_START | val, ESP_DMA_CMD); +} + +static const struct esp_driver_ops pci_esp_ops = { + .esp_write8 = pci_esp_write8, + .esp_read8 = pci_esp_read8, + .map_single = pci_esp_map_single, + .map_sg = pci_esp_map_sg, + .unmap_single = pci_esp_unmap_single, + .unmap_sg = pci_esp_unmap_sg, + .irq_pending = pci_esp_irq_pending, + .reset_dma = pci_esp_reset_dma, + .dma_drain = pci_esp_dma_drain, + .dma_invalidate = pci_esp_dma_invalidate, + .send_dma_cmd = pci_esp_send_dma_cmd, + .dma_error = pci_esp_dma_error, +}; + +/* + * Read DC-390 eeprom + */ +static void dc390_eeprom_prepare_read(struct pci_dev *pdev, u8 cmd) +{ + u8 carry_flag = 1, j = 0x80, bval; + int i; + + for (i = 0; i < 9; i++) { + if (carry_flag) { + pci_write_config_byte(pdev, 0x80, 0x40); + bval = 0xc0; + } else + bval = 0x80; + + udelay(160); + pci_write_config_byte(pdev, 0x80, bval); + udelay(160); + pci_write_config_byte(pdev, 0x80, 0); + udelay(160); + + carry_flag = (cmd & j) ? 1 : 0; + j >>= 1; + } +} + +static u16 dc390_eeprom_get_data(struct pci_dev *pdev) +{ + int i; + u16 wval = 0; + u8 bval; + + for (i = 0; i < 16; i++) { + wval <<= 1; + + pci_write_config_byte(pdev, 0x80, 0x80); + udelay(160); + pci_write_config_byte(pdev, 0x80, 0x40); + udelay(160); + pci_read_config_byte(pdev, 0x00, &bval); + + if (bval == 0x22) + wval |= 1; + } + + return wval; +} + +static void dc390_read_eeprom(struct pci_dev *pdev, u16 *ptr) +{ + u8 cmd = DC390_EEPROM_READ, i; + + for (i = 0; i < DC390_EEPROM_LEN; i++) { + pci_write_config_byte(pdev, 0xc0, 0); + udelay(160); + + dc390_eeprom_prepare_read(pdev, cmd++); + *ptr++ = dc390_eeprom_get_data(pdev); + + pci_write_config_byte(pdev, 0x80, 0); + pci_write_config_byte(pdev, 0x80, 0); + udelay(160); + } +} + +static void dc390_check_eeprom(struct esp *esp) +{ + u8 EEbuf[128]; + u16 *ptr = (u16 *)EEbuf, wval = 0; + int i; + + dc390_read_eeprom((struct pci_dev *)esp->dev, ptr); + + for (i = 0; i < DC390_EEPROM_LEN; i++, ptr++) + wval += *ptr; + + /* no Tekram EEprom found */ + if (wval != 0x1234) { + struct pci_dev *pdev = esp->dev; + dev_printk(KERN_INFO, &pdev->dev, + "No valid Tekram EEprom found\n"); + return; + } + esp->scsi_id = EEbuf[DC390_EE_ADAPT_SCSI_ID]; + esp->num_tags = 2 << EEbuf[DC390_EE_TAG_CMD_NUM]; +} + +static int pci_esp_probe_one(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct scsi_host_template *hostt = &scsi_esp_template; + int err = -ENODEV; + struct Scsi_Host *shost; + struct esp *esp; + struct pci_esp_priv *pep; + + if (pci_enable_device(pdev)) { + dev_printk(KERN_INFO, &pdev->dev, "cannot enable device\n"); + return -ENODEV; + } + + if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) { + dev_printk(KERN_INFO, &pdev->dev, + "failed to set 32bit DMA mask\n"); + goto fail_disable_device; + } + + shost = scsi_host_alloc(hostt, sizeof(struct esp)); + if (!shost) { + dev_printk(KERN_INFO, &pdev->dev, + "failed to allocate scsi host\n"); + err = -ENOMEM; + goto fail_disable_device; + } + + pep = kzalloc(sizeof(struct pci_esp_priv), GFP_KERNEL); + if (!pep) { + dev_printk(KERN_INFO, &pdev->dev, + "failed to allocate esp_priv\n"); + err = -ENOMEM; + goto fail_host_alloc; + } + + esp = shost_priv(shost); + esp->host = shost; + esp->dev = pdev; + esp->ops = &pci_esp_ops; + /* + * The am53c974 HBA has a design flaw of generating + * spurious DMA completion interrupts when using + * DMA for command submission. + */ + esp->flags |= ESP_FLAG_USE_FIFO; + pep->esp = esp; + + if (pci_request_regions(pdev, DRV_MODULE_NAME)) { + dev_printk(KERN_ERR, &pdev->dev, + "pci memory selection failed\n"); + goto fail_priv_alloc; + } + + esp->regs = pci_iomap(pdev, 0, pci_resource_len(pdev, 0)); + if (!esp->regs) { + dev_printk(KERN_ERR, &pdev->dev, "pci I/O map failed\n"); + err = -EINVAL; + goto fail_release_regions; + } + esp->dma_regs = esp->regs; + + pci_set_master(pdev); + + esp->command_block = pci_alloc_consistent(pdev, 16, + &esp->command_block_dma); + if (!esp->command_block) { + dev_printk(KERN_ERR, &pdev->dev, + "failed to allocate command block\n"); + err = -ENOMEM; + goto fail_unmap_regs; + } + + err = request_irq(pdev->irq, scsi_esp_intr, IRQF_SHARED, + DRV_MODULE_NAME, esp); + if (err < 0) { + dev_printk(KERN_ERR, &pdev->dev, "failed to register IRQ\n"); + goto fail_unmap_command_block; + } + + esp->scsi_id = 7; + dc390_check_eeprom(esp); + + shost->this_id = esp->scsi_id; + shost->max_id = 8; + shost->irq = pdev->irq; + shost->io_port = pci_resource_start(pdev, 0); + shost->n_io_port = pci_resource_len(pdev, 0); + shost->unique_id = shost->io_port; + esp->scsi_id_mask = (1 << esp->scsi_id); + /* Assume 40MHz clock */ + esp->cfreq = 40000000; + + pci_set_drvdata(pdev, pep); + + err = scsi_esp_register(esp, &pdev->dev); + if (err) + goto fail_free_irq; + + return 0; + +fail_free_irq: + free_irq(pdev->irq, esp); +fail_unmap_command_block: + pci_free_consistent(pdev, 16, esp->command_block, + esp->command_block_dma); +fail_unmap_regs: + pci_iounmap(pdev, esp->regs); +fail_release_regions: + pci_release_regions(pdev); +fail_priv_alloc: + kfree(pep); +fail_host_alloc: + scsi_host_put(shost); +fail_disable_device: + pci_disable_device(pdev); + + return err; +} + +static void pci_esp_remove_one(struct pci_dev *pdev) +{ + struct pci_esp_priv *pep = pci_get_drvdata(pdev); + struct esp *esp = pep->esp; + + scsi_esp_unregister(esp); + free_irq(pdev->irq, esp); + pci_free_consistent(pdev, 16, esp->command_block, + esp->command_block_dma); + pci_iounmap(pdev, esp->regs); + pci_release_regions(pdev); + pci_disable_device(pdev); + kfree(pep); + + scsi_host_put(esp->host); +} + +static struct pci_device_id am53c974_pci_tbl[] = { + { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_SCSI, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { } +}; +MODULE_DEVICE_TABLE(pci, am53c974_pci_tbl); + +static struct pci_driver am53c974_driver = { + .name = DRV_MODULE_NAME, + .id_table = am53c974_pci_tbl, + .probe = pci_esp_probe_one, + .remove = pci_esp_remove_one, +}; + +static int __init am53c974_module_init(void) +{ + return pci_register_driver(&am53c974_driver); +} + +static void __exit am53c974_module_exit(void) +{ + pci_unregister_driver(&am53c974_driver); +} + +MODULE_DESCRIPTION("AM53C974 SCSI driver"); +MODULE_AUTHOR("Hannes Reinecke <hare@suse.de>"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_MODULE_VERSION); + +module_param(am53c974_debug, bool, 0644); +MODULE_PARM_DESC(am53c974_debug, "Enable debugging"); + +module_init(am53c974_module_init); +module_exit(am53c974_module_exit); |