diff options
Diffstat (limited to 'drivers/serial/sh-sci.c')
-rw-r--r-- | drivers/serial/sh-sci.c | 201 |
1 files changed, 20 insertions, 181 deletions
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 31532e97fb96..231f77b16492 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -51,7 +51,6 @@ #ifdef CONFIG_SUPERH #include <asm/clock.h> #include <asm/sh_bios.h> -#include <asm/kgdb.h> #endif #include "sh-sci.h" @@ -85,10 +84,6 @@ struct sci_port { #endif }; -#ifdef CONFIG_SH_KGDB -static struct sci_port *kgdb_sci_port; -#endif - #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE static struct sci_port *serial_console_port; #endif @@ -107,21 +102,18 @@ to_sci_port(struct uart_port *uart) return container_of(uart, struct sci_port, port); } -#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) && \ - defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB) +#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_SH_SCI_CONSOLE) static inline void handle_error(struct uart_port *port) { /* Clear error flags */ sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port)); } -static int get_char(struct uart_port *port) +static int sci_poll_get_char(struct uart_port *port) { - unsigned long flags; unsigned short status; int c; - spin_lock_irqsave(&port->lock, flags); do { status = sci_in(port, SCxSR); if (status & SCxSR_ERRORS(port)) { @@ -129,24 +121,20 @@ static int get_char(struct uart_port *port) continue; } } while (!(status & SCxSR_RDxF(port))); + c = sci_in(port, SCxRDR); + /* Dummy read */ sci_in(port, SCxSR); sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); - spin_unlock_irqrestore(&port->lock, flags); return c; } -#endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */ -#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) || defined(CONFIG_SH_KGDB) -static void put_char(struct uart_port *port, char c) +static void sci_poll_put_char(struct uart_port *port, unsigned char c) { - unsigned long flags; unsigned short status; - spin_lock_irqsave(&port->lock, flags); - do { status = sci_in(port, SCxSR); } while (!(status & SCxSR_TDxE(port))); @@ -154,82 +142,8 @@ static void put_char(struct uart_port *port, char c) sci_in(port, SCxSR); /* Dummy read */ sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); sci_out(port, SCxTDR, c); - - spin_unlock_irqrestore(&port->lock, flags); } -#endif - -#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE -static void put_string(struct sci_port *sci_port, const char *buffer, int count) -{ - struct uart_port *port = &sci_port->port; - const unsigned char *p = buffer; - int i; - -#if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB) - int checksum; - int usegdb = 0; - -#ifdef CONFIG_SH_STANDARD_BIOS - /* This call only does a trap the first time it is - * called, and so is safe to do here unconditionally - */ - usegdb |= sh_bios_in_gdb_mode(); -#endif -#ifdef CONFIG_SH_KGDB - usegdb |= (kgdb_in_gdb_mode && (sci_port == kgdb_sci_port)); -#endif - - if (usegdb) { - /* $<packet info>#<checksum>. */ - do { - unsigned char c; - put_char(port, '$'); - put_char(port, 'O'); /* 'O'utput to console */ - checksum = 'O'; - - /* Don't use run length encoding */ - for (i = 0; i < count; i++) { - int h, l; - - c = *p++; - h = hex_asc_hi(c); - l = hex_asc_lo(c); - put_char(port, h); - put_char(port, l); - checksum += h + l; - } - put_char(port, '#'); - put_char(port, hex_asc_hi(checksum)); - put_char(port, hex_asc_lo(checksum)); - } while (get_char(port) != '+'); - } else -#endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */ - for (i = 0; i < count; i++) { - if (*p == 10) - put_char(port, '\r'); - put_char(port, *p++); - } -} -#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */ - -#ifdef CONFIG_SH_KGDB -static int kgdb_sci_getchar(void) -{ - int c; - - /* Keep trying to read a character, this could be neater */ - while ((c = get_char(&kgdb_sci_port->port)) < 0) - cpu_relax(); - - return c; -} - -static inline void kgdb_sci_putchar(int c) -{ - put_char(&kgdb_sci_port->port, c); -} -#endif /* CONFIG_SH_KGDB */ +#endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE */ #if defined(__H8300S__) enum { sci_disable, sci_enable }; @@ -1181,6 +1095,10 @@ static struct uart_ops sci_uart_ops = { .request_port = sci_request_port, .config_port = sci_config_port, .verify_port = sci_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = sci_poll_get_char, + .poll_put_char = sci_poll_put_char, +#endif }; static void __init sci_init_ports(void) @@ -1247,7 +1165,15 @@ int __init early_sci_setup(struct uart_port *port) static void serial_console_write(struct console *co, const char *s, unsigned count) { - put_string(serial_console_port, s, count); + struct uart_port *port = &serial_console_port->port; + int i; + + for (i = 0; i < count; i++) { + if (*s == 10) + sci_poll_put_char(port, '\r'); + + sci_poll_put_char(port, *s++); + } } static int __init serial_console_setup(struct console *co, char *options) @@ -1325,88 +1251,7 @@ static int __init sci_console_init(void) console_initcall(sci_console_init); #endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */ -#ifdef CONFIG_SH_KGDB_CONSOLE -/* - * FIXME: Most of this can go away.. at the moment, we rely on - * arch/sh/kernel/setup.c to do the command line parsing for kgdb, though - * most of that can easily be done here instead. - * - * For the time being, just accept the values that were parsed earlier.. - */ -static void __init kgdb_console_get_options(struct uart_port *port, int *baud, - int *parity, int *bits) -{ - *baud = kgdb_baud; - *parity = tolower(kgdb_parity); - *bits = kgdb_bits - '0'; -} - -/* - * The naming here is somewhat misleading, since kgdb_console_setup() takes - * care of the early-on initialization for kgdb, regardless of whether we - * actually use kgdb as a console or not. - * - * On the plus side, this lets us kill off the old kgdb_sci_setup() nonsense. - */ -int __init kgdb_console_setup(struct console *co, char *options) -{ - struct uart_port *port = &sci_ports[kgdb_portnum].port; - int baud = 38400; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - if (co->index != kgdb_portnum) - co->index = kgdb_portnum; - - kgdb_sci_port = &sci_ports[co->index]; - port = &kgdb_sci_port->port; - - /* - * Also need to check port->type, we don't actually have any - * UPIO_PORT ports, but uart_report_port() handily misreports - * it anyways if we don't have a port available by the time this is - * called. - */ - if (!port->type) - return -ENODEV; - if (!port->membase || !port->mapbase) - return -ENODEV; - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - else - kgdb_console_get_options(port, &baud, &parity, &bits); - - kgdb_getchar = kgdb_sci_getchar; - kgdb_putchar = kgdb_sci_putchar; - - return uart_set_options(port, co, baud, parity, bits, flow); -} - -static struct console kgdb_console = { - .name = "ttySC", - .device = uart_console_device, - .write = kgdb_console_write, - .setup = kgdb_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &sci_uart_driver, -}; - -/* Register the KGDB console so we get messages (d'oh!) */ -static int __init kgdb_console_init(void) -{ - sci_init_ports(); - register_console(&kgdb_console); - return 0; -} -console_initcall(kgdb_console_init); -#endif /* CONFIG_SH_KGDB_CONSOLE */ - -#if defined(CONFIG_SH_KGDB_CONSOLE) -#define SCI_CONSOLE (&kgdb_console) -#elif defined(CONFIG_SERIAL_SH_SCI_CONSOLE) +#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) #define SCI_CONSOLE (&serial_console) #else #define SCI_CONSOLE 0 @@ -1481,12 +1326,6 @@ static int __devinit sci_probe(struct platform_device *dev) uart_add_one_port(&sci_uart_driver, &sciport->port); } -#if defined(CONFIG_SH_KGDB) && !defined(CONFIG_SH_KGDB_CONSOLE) - kgdb_sci_port = &sci_ports[kgdb_portnum]; - kgdb_getchar = kgdb_sci_getchar; - kgdb_putchar = kgdb_sci_putchar; -#endif - #if defined(CONFIG_CPU_FREQ) && defined(CONFIG_HAVE_CLK) cpufreq_register_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER); dev_info(&dev->dev, "CPU frequency notifier registered\n"); |