summaryrefslogtreecommitdiff
path: root/drivers/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/8250.c15
-rw-r--r--drivers/serial/8250_gsc.c4
-rw-r--r--drivers/serial/amba-pl010.c2
-rw-r--r--drivers/serial/amba-pl011.c38
-rw-r--r--drivers/serial/crisv10.c173
-rw-r--r--drivers/serial/icom.c2
-rw-r--r--drivers/serial/imx.c15
-rw-r--r--drivers/serial/jsm/jsm.h2
-rw-r--r--drivers/serial/jsm/jsm_driver.c1
-rw-r--r--drivers/serial/mpc52xx_uart.c2
-rw-r--r--drivers/serial/nwpserial.c4
-rw-r--r--drivers/serial/s3c6400.c1
-rw-r--r--drivers/serial/samsung.c61
-rw-r--r--drivers/serial/samsung.h4
14 files changed, 202 insertions, 122 deletions
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index b4b39811b445..a0127e93ade0 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -137,6 +137,7 @@ struct uart_8250_port {
unsigned char mcr;
unsigned char mcr_mask; /* mask of user bits */
unsigned char mcr_force; /* mask of forced bits */
+ unsigned char cur_iotype; /* Running I/O type */
/*
* Some bits in registers are cleared on a read, so they must
@@ -471,6 +472,7 @@ static void io_serial_out(struct uart_port *p, int offset, int value)
static void set_io_from_upio(struct uart_port *p)
{
+ struct uart_8250_port *up = (struct uart_8250_port *)p;
switch (p->iotype) {
case UPIO_HUB6:
p->serial_in = hub6_serial_in;
@@ -509,6 +511,8 @@ static void set_io_from_upio(struct uart_port *p)
p->serial_out = io_serial_out;
break;
}
+ /* Remember loaded iotype */
+ up->cur_iotype = p->iotype;
}
static void
@@ -1937,6 +1941,9 @@ static int serial8250_startup(struct uart_port *port)
up->capabilities = uart_config[up->port.type].flags;
up->mcr = 0;
+ if (up->port.iotype != up->cur_iotype)
+ set_io_from_upio(port);
+
if (up->port.type == PORT_16C950) {
/* Wake up and initialize UART */
up->acr = 0;
@@ -2563,6 +2570,9 @@ static void serial8250_config_port(struct uart_port *port, int flags)
if (ret < 0)
probeflags &= ~PROBE_RSA;
+ if (up->port.iotype != up->cur_iotype)
+ set_io_from_upio(port);
+
if (flags & UART_CONFIG_TYPE)
autoconfig(up, probeflags);
if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ)
@@ -2671,6 +2681,11 @@ serial8250_register_ports(struct uart_driver *drv, struct device *dev)
{
int i;
+ for (i = 0; i < nr_uarts; i++) {
+ struct uart_8250_port *up = &serial8250_ports[i];
+ up->cur_iotype = 0xFF;
+ }
+
serial8250_isa_init_ports();
for (i = 0; i < nr_uarts; i++) {
diff --git a/drivers/serial/8250_gsc.c b/drivers/serial/8250_gsc.c
index 418b4fe9a0a1..33149d982e82 100644
--- a/drivers/serial/8250_gsc.c
+++ b/drivers/serial/8250_gsc.c
@@ -39,9 +39,9 @@ static int __init serial_init_chip(struct parisc_device *dev)
*/
if (parisc_parent(dev)->id.hw_type != HPHW_IOA)
printk(KERN_INFO
- "Serial: device 0x%lx not configured.\n"
+ "Serial: device 0x%llx not configured.\n"
"Enable support for Wax, Lasi, Asp or Dino.\n",
- dev->hpa.start);
+ (unsigned long long)dev->hpa.start);
return -ENODEV;
}
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index e3a5ad5ef1d6..cdc049d4350f 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -665,7 +665,7 @@ static struct uart_driver amba_reg = {
.cons = AMBA_CONSOLE,
};
-static int pl010_probe(struct amba_device *dev, void *id)
+static int pl010_probe(struct amba_device *dev, struct amba_id *id)
{
struct uart_amba_port *uap;
void __iomem *base;
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index 8b2b9700f3e4..8c5bda27736c 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -70,6 +70,23 @@ struct uart_amba_port {
struct clk *clk;
unsigned int im; /* interrupt mask */
unsigned int old_status;
+ unsigned int ifls; /* vendor-specific */
+};
+
+/* There is by now at least one vendor with differing details, so handle it */
+struct vendor_data {
+ unsigned int ifls;
+ unsigned int fifosize;
+};
+
+static struct vendor_data vendor_arm = {
+ .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
+ .fifosize = 16,
+};
+
+static struct vendor_data vendor_st = {
+ .ifls = UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF,
+ .fifosize = 64,
};
static void pl011_stop_tx(struct uart_port *port)
@@ -360,8 +377,7 @@ static int pl011_startup(struct uart_port *port)
if (retval)
goto clk_dis;
- writew(UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
- uap->port.membase + UART011_IFLS);
+ writew(uap->ifls, uap->port.membase + UART011_IFLS);
/*
* Provoke TX FIFO interrupt into asserting.
@@ -729,9 +745,10 @@ static struct uart_driver amba_reg = {
.cons = AMBA_CONSOLE,
};
-static int pl011_probe(struct amba_device *dev, void *id)
+static int pl011_probe(struct amba_device *dev, struct amba_id *id)
{
struct uart_amba_port *uap;
+ struct vendor_data *vendor = id->data;
void __iomem *base;
int i, ret;
@@ -762,12 +779,13 @@ static int pl011_probe(struct amba_device *dev, void *id)
goto unmap;
}
+ uap->ifls = vendor->ifls;
uap->port.dev = &dev->dev;
uap->port.mapbase = dev->res.start;
uap->port.membase = base;
uap->port.iotype = UPIO_MEM;
uap->port.irq = dev->irq[0];
- uap->port.fifosize = 16;
+ uap->port.fifosize = vendor->fifosize;
uap->port.ops = &amba_pl011_pops;
uap->port.flags = UPF_BOOT_AUTOCONF;
uap->port.line = i;
@@ -812,6 +830,12 @@ static struct amba_id pl011_ids[] __initdata = {
{
.id = 0x00041011,
.mask = 0x000fffff,
+ .data = &vendor_arm,
+ },
+ {
+ .id = 0x00380802,
+ .mask = 0x00ffffff,
+ .data = &vendor_st,
},
{ 0, 0 },
};
@@ -845,7 +869,11 @@ static void __exit pl011_exit(void)
uart_unregister_driver(&amba_reg);
}
-module_init(pl011_init);
+/*
+ * While this can be a module, if builtin it's most likely the console
+ * So let's leave module_exit but move module_init to an earlier place
+ */
+arch_initcall(pl011_init);
module_exit(pl011_exit);
MODULE_AUTHOR("ARM Ltd/Deep Blue Solutions Ltd");
diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index 7ba7d70f04d6..7be52fe288eb 100644
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -23,16 +23,18 @@ static char *serial_version = "$Revision: 1.25 $";
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/init.h>
-#include <asm/uaccess.h>
#include <linux/kernel.h>
#include <linux/mutex.h>
#include <linux/bitops.h>
+#include <linux/seq_file.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/dma.h>
#include <asm/system.h>
-#include <linux/delay.h>
#include <arch/svinto.h>
@@ -456,7 +458,6 @@ static struct e100_serial rs_table[] = {
#define NR_PORTS (sizeof(rs_table)/sizeof(struct e100_serial))
-static struct ktermios *serial_termios[NR_PORTS];
#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER
static struct fast_timer fast_timers[NR_PORTS];
#endif
@@ -4257,151 +4258,132 @@ rs_open(struct tty_struct *tty, struct file * filp)
return 0;
}
+#ifdef CONFIG_PROC_FS
/*
* /proc fs routines....
*/
-static int line_info(char *buf, struct e100_serial *info)
+static void seq_line_info(struct seq_file *m, struct e100_serial *info)
{
- char stat_buf[30];
- int ret;
unsigned long tmp;
- ret = sprintf(buf, "%d: uart:E100 port:%lX irq:%d",
- info->line, (unsigned long)info->ioport, info->irq);
+ seq_printf(m, "%d: uart:E100 port:%lX irq:%d",
+ info->line, (unsigned long)info->ioport, info->irq);
if (!info->ioport || (info->type == PORT_UNKNOWN)) {
- ret += sprintf(buf+ret, "\n");
- return ret;
+ seq_printf(m, "\n");
+ return;
}
- stat_buf[0] = 0;
- stat_buf[1] = 0;
- if (!E100_RTS_GET(info))
- strcat(stat_buf, "|RTS");
- if (!E100_CTS_GET(info))
- strcat(stat_buf, "|CTS");
- if (!E100_DTR_GET(info))
- strcat(stat_buf, "|DTR");
- if (!E100_DSR_GET(info))
- strcat(stat_buf, "|DSR");
- if (!E100_CD_GET(info))
- strcat(stat_buf, "|CD");
- if (!E100_RI_GET(info))
- strcat(stat_buf, "|RI");
-
- ret += sprintf(buf+ret, " baud:%d", info->baud);
-
- ret += sprintf(buf+ret, " tx:%lu rx:%lu",
+ seq_printf(m, " baud:%d", info->baud);
+ seq_printf(m, " tx:%lu rx:%lu",
(unsigned long)info->icount.tx,
(unsigned long)info->icount.rx);
tmp = CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
- if (tmp) {
- ret += sprintf(buf+ret, " tx_pend:%lu/%lu",
- (unsigned long)tmp,
- (unsigned long)SERIAL_XMIT_SIZE);
- }
+ if (tmp)
+ seq_printf(m, " tx_pend:%lu/%lu",
+ (unsigned long)tmp,
+ (unsigned long)SERIAL_XMIT_SIZE);
- ret += sprintf(buf+ret, " rx_pend:%lu/%lu",
- (unsigned long)info->recv_cnt,
- (unsigned long)info->max_recv_cnt);
+ seq_printf(m, " rx_pend:%lu/%lu",
+ (unsigned long)info->recv_cnt,
+ (unsigned long)info->max_recv_cnt);
#if 1
if (info->port.tty) {
-
if (info->port.tty->stopped)
- ret += sprintf(buf+ret, " stopped:%i",
- (int)info->port.tty->stopped);
+ seq_printf(m, " stopped:%i",
+ (int)info->port.tty->stopped);
if (info->port.tty->hw_stopped)
- ret += sprintf(buf+ret, " hw_stopped:%i",
- (int)info->port.tty->hw_stopped);
+ seq_printf(m, " hw_stopped:%i",
+ (int)info->port.tty->hw_stopped);
}
{
unsigned char rstat = info->ioport[REG_STATUS];
- if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) )
- ret += sprintf(buf+ret, " xoff_detect:1");
+ if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect))
+ seq_printf(m, " xoff_detect:1");
}
#endif
-
-
-
if (info->icount.frame)
- ret += sprintf(buf+ret, " fe:%lu",
- (unsigned long)info->icount.frame);
+ seq_printf(m, " fe:%lu", (unsigned long)info->icount.frame);
if (info->icount.parity)
- ret += sprintf(buf+ret, " pe:%lu",
- (unsigned long)info->icount.parity);
+ seq_printf(m, " pe:%lu", (unsigned long)info->icount.parity);
if (info->icount.brk)
- ret += sprintf(buf+ret, " brk:%lu",
- (unsigned long)info->icount.brk);
+ seq_printf(m, " brk:%lu", (unsigned long)info->icount.brk);
if (info->icount.overrun)
- ret += sprintf(buf+ret, " oe:%lu",
- (unsigned long)info->icount.overrun);
+ seq_printf(m, " oe:%lu", (unsigned long)info->icount.overrun);
/*
* Last thing is the RS-232 status lines
*/
- ret += sprintf(buf+ret, " %s\n", stat_buf+1);
- return ret;
+ if (!E100_RTS_GET(info))
+ seq_puts(m, "|RTS");
+ if (!E100_CTS_GET(info))
+ seq_puts(m, "|CTS");
+ if (!E100_DTR_GET(info))
+ seq_puts(m, "|DTR");
+ if (!E100_DSR_GET(info))
+ seq_puts(m, "|DSR");
+ if (!E100_CD_GET(info))
+ seq_puts(m, "|CD");
+ if (!E100_RI_GET(info))
+ seq_puts(m, "|RI");
+ seq_puts(m, "\n");
}
-int rs_read_proc(char *page, char **start, off_t off, int count,
- int *eof, void *data)
+
+static int crisv10_proc_show(struct seq_file *m, void *v)
{
- int i, len = 0, l;
- off_t begin = 0;
+ int i;
- len += sprintf(page, "serinfo:1.0 driver:%s\n",
- serial_version);
- for (i = 0; i < NR_PORTS && len < 4000; i++) {
+ seq_printf(m, "serinfo:1.0 driver:%s\n", serial_version);
+
+ for (i = 0; i < NR_PORTS; i++) {
if (!rs_table[i].enabled)
continue;
- l = line_info(page + len, &rs_table[i]);
- len += l;
- if (len+begin > off+count)
- goto done;
- if (len+begin < off) {
- begin += len;
- len = 0;
- }
+ seq_line_info(m, &rs_table[i]);
}
#ifdef DEBUG_LOG_INCLUDED
for (i = 0; i < debug_log_pos; i++) {
- len += sprintf(page + len, "%-4i %lu.%lu ", i, debug_log[i].time, timer_data_to_ns(debug_log[i].timer_data));
- len += sprintf(page + len, debug_log[i].string, debug_log[i].value);
- if (len+begin > off+count)
- goto done;
- if (len+begin < off) {
- begin += len;
- len = 0;
- }
+ seq_printf(m, "%-4i %lu.%lu ",
+ i, debug_log[i].time,
+ timer_data_to_ns(debug_log[i].timer_data));
+ seq_printf(m, debug_log[i].string, debug_log[i].value);
}
- len += sprintf(page + len, "debug_log %i/%i %li bytes\n",
- i, DEBUG_LOG_SIZE, begin+len);
+ seq_printf(m, "debug_log %i/%i\n", i, DEBUG_LOG_SIZE);
debug_log_pos = 0;
#endif
+ return 0;
+}
- *eof = 1;
-done:
- if (off >= len+begin)
- return 0;
- *start = page + (off-begin);
- return ((count < begin+len-off) ? count : begin+len-off);
+static int crisv10_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, crisv10_proc_show, NULL);
}
+static const struct file_operations crisv10_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = crisv10_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+#endif
+
+
/* Finally, routines used to initialize the serial driver. */
-static void
-show_serial_version(void)
+static void show_serial_version(void)
{
printk(KERN_INFO
- "ETRAX 100LX serial-driver %s, (c) 2000-2004 Axis Communications AB\r\n",
+ "ETRAX 100LX serial-driver %s, "
+ "(c) 2000-2004 Axis Communications AB\r\n",
&serial_version[11]); /* "$Revision: x.yy" */
}
@@ -4425,13 +4407,14 @@ static const struct tty_operations rs_ops = {
.break_ctl = rs_break,
.send_xchar = rs_send_xchar,
.wait_until_sent = rs_wait_until_sent,
- .read_proc = rs_read_proc,
.tiocmget = rs_tiocmget,
- .tiocmset = rs_tiocmset
+ .tiocmset = rs_tiocmset,
+#ifdef CONFIG_PROC_FS
+ .proc_fops = &crisv10_proc_fops,
+#endif
};
-static int __init
-rs_init(void)
+static int __init rs_init(void)
{
int i;
struct e100_serial *info;
diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c
index 6579e2be1dd1..a461b3b2c72d 100644
--- a/drivers/serial/icom.c
+++ b/drivers/serial/icom.c
@@ -1472,8 +1472,8 @@ static void icom_remove_adapter(struct icom_adapter *icom_adapter)
free_irq(icom_adapter->pci_dev->irq, (void *) icom_adapter);
iounmap(icom_adapter->base_addr);
- icom_free_adapter(icom_adapter);
pci_release_regions(icom_adapter->pci_dev);
+ icom_free_adapter(icom_adapter);
}
static void icom_kref_release(struct kref *kref)
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 9f460b175c50..738c8a5f64f2 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -66,7 +66,7 @@
#define ONEMS 0xb0 /* One Millisecond register */
#define UTS 0xb4 /* UART Test Register */
#endif
-#if defined(CONFIG_ARCH_IMX) || defined(CONFIG_ARCH_MX1)
+#ifdef CONFIG_ARCH_MX1
#define BIPR1 0xb0 /* Incremental Preset Register 1 */
#define BIPR2 0xb4 /* Incremental Preset Register 2 */
#define BIPR3 0xb8 /* Incremental Preset Register 3 */
@@ -96,7 +96,7 @@
#define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */
#define UCR1_SNDBRK (1<<4) /* Send break */
#define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */
-#if defined(CONFIG_ARCH_IMX) || defined(CONFIG_ARCH_MX1)
+#ifdef CONFIG_ARCH_MX1
#define UCR1_UARTCLKEN (1<<2) /* UART clock enabled */
#endif
#if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2
@@ -127,7 +127,7 @@
#define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */
#define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */
#define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */
-#ifdef CONFIG_ARCH_IMX
+#ifdef CONFIG_ARCH_MX1
#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz, only on mx1 */
#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz, only on mx1 */
#endif
@@ -180,13 +180,6 @@
#define UTS_SOFTRST (1<<0) /* Software reset */
/* We've been assigned a range on the "Low-density serial ports" major */
-#ifdef CONFIG_ARCH_IMX
-#define SERIAL_IMX_MAJOR 204
-#define MINOR_START 41
-#define DEV_NAME "ttySMX"
-#define MAX_INTERNAL_IRQ IMX_IRQS
-#endif
-
#ifdef CONFIG_ARCH_MXC
#define SERIAL_IMX_MAJOR 207
#define MINOR_START 16
@@ -1031,6 +1024,8 @@ imx_console_setup(struct console *co, char *options)
if (co->index == -1 || co->index >= ARRAY_SIZE(imx_ports))
co->index = 0;
sport = imx_ports[co->index];
+ if(sport == NULL)
+ return -ENODEV;
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
diff --git a/drivers/serial/jsm/jsm.h b/drivers/serial/jsm/jsm.h
index 8871aaa3dba6..c0a3e2734e24 100644
--- a/drivers/serial/jsm/jsm.h
+++ b/drivers/serial/jsm/jsm.h
@@ -130,8 +130,6 @@ struct jsm_board
struct pci_dev *pci_dev;
u32 maxports; /* MAX ports this board can handle */
- spinlock_t bd_lock; /* Used to protect board */
-
spinlock_t bd_intr_lock; /* Used to protect the poller tasklet and
* the interrupt routine from each other.
*/
diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c
index d2d32a198629..b3604aa322a4 100644
--- a/drivers/serial/jsm/jsm_driver.c
+++ b/drivers/serial/jsm/jsm_driver.c
@@ -88,7 +88,6 @@ static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device
else
brd->maxports = 2;
- spin_lock_init(&brd->bd_lock);
spin_lock_init(&brd->bd_intr_lock);
/* store which revision we have */
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 7f72f8ceaa6f..b3feb6198d57 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -988,7 +988,7 @@ mpc52xx_console_setup(struct console *co, char *options)
pr_debug("mpc52xx_console_setup co=%p, co->index=%i, options=%s\n",
co, co->index, options);
- if ((co->index < 0) || (co->index > MPC52xx_PSC_MAXNUM)) {
+ if ((co->index < 0) || (co->index >= MPC52xx_PSC_MAXNUM)) {
pr_debug("PSC%x out of range\n", co->index);
return -EINVAL;
}
diff --git a/drivers/serial/nwpserial.c b/drivers/serial/nwpserial.c
index 32f3eaf0d262..9e150b19d726 100644
--- a/drivers/serial/nwpserial.c
+++ b/drivers/serial/nwpserial.c
@@ -145,11 +145,13 @@ static irqreturn_t nwpserial_interrupt(int irq, void *dev_id)
ch = dcr_read(up->dcr_host, UART_RX);
if (up->port.ignore_status_mask != NWPSERIAL_STATUS_RXVALID)
tty_insert_flip_char(tty, ch, TTY_NORMAL);
- } while (dcr_read(up->dcr_host, UART_RX) & UART_LSR_DR);
+ } while (dcr_read(up->dcr_host, UART_LSR) & UART_LSR_DR);
tty_flip_buffer_push(tty);
ret = IRQ_HANDLED;
+ /* clear interrupt */
+ dcr_write(up->dcr_host, UART_IIR, 1);
out:
spin_unlock(&up->port.lock);
return ret;
diff --git a/drivers/serial/s3c6400.c b/drivers/serial/s3c6400.c
index 06936d13393f..3e3785233682 100644
--- a/drivers/serial/s3c6400.c
+++ b/drivers/serial/s3c6400.c
@@ -102,6 +102,7 @@ static struct s3c24xx_uart_info s3c6400_uart_inf = {
.name = "Samsung S3C6400 UART",
.type = PORT_S3C6400,
.fifosize = 64,
+ .has_divslot = 1,
.rx_fifomask = S3C2440_UFSTAT_RXMASK,
.rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
.rx_fifofull = S3C2440_UFSTAT_RXFULL,
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index e06686ae858b..93b5d75db126 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -508,6 +508,7 @@ s3c24xx_serial_setsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c)
struct baud_calc {
struct s3c24xx_uart_clksrc *clksrc;
unsigned int calc;
+ unsigned int divslot;
unsigned int quot;
struct clk *src;
};
@@ -517,6 +518,7 @@ static int s3c24xx_serial_calcbaud(struct baud_calc *calc,
struct s3c24xx_uart_clksrc *clksrc,
unsigned int baud)
{
+ struct s3c24xx_uart_port *ourport = to_ourport(port);
unsigned long rate;
calc->src = clk_get(port->dev, clksrc->name);
@@ -527,8 +529,24 @@ static int s3c24xx_serial_calcbaud(struct baud_calc *calc,
rate /= clksrc->divisor;
calc->clksrc = clksrc;
- calc->quot = (rate + (8 * baud)) / (16 * baud);
- calc->calc = (rate / (calc->quot * 16));
+
+ if (ourport->info->has_divslot) {
+ unsigned long div = rate / baud;
+
+ /* The UDIVSLOT register on the newer UARTs allows us to
+ * get a divisor adjustment of 1/16th on the baud clock.
+ *
+ * We don't keep the UDIVSLOT value (the 16ths we calculated
+ * by not multiplying the baud by 16) as it is easy enough
+ * to recalculate.
+ */
+
+ calc->quot = div / 16;
+ calc->calc = rate / div;
+ } else {
+ calc->quot = (rate + (8 * baud)) / (16 * baud);
+ calc->calc = (rate / (calc->quot * 16));
+ }
calc->quot--;
return 1;
@@ -611,6 +629,30 @@ static unsigned int s3c24xx_serial_getclk(struct uart_port *port,
return best->quot;
}
+/* udivslot_table[]
+ *
+ * This table takes the fractional value of the baud divisor and gives
+ * the recommended setting for the UDIVSLOT register.
+ */
+static u16 udivslot_table[16] = {
+ [0] = 0x0000,
+ [1] = 0x0080,
+ [2] = 0x0808,
+ [3] = 0x0888,
+ [4] = 0x2222,
+ [5] = 0x4924,
+ [6] = 0x4A52,
+ [7] = 0x54AA,
+ [8] = 0x5555,
+ [9] = 0xD555,
+ [10] = 0xD5D5,
+ [11] = 0xDDD5,
+ [12] = 0xDDDD,
+ [13] = 0xDFDD,
+ [14] = 0xDFDF,
+ [15] = 0xFFDF,
+};
+
static void s3c24xx_serial_set_termios(struct uart_port *port,
struct ktermios *termios,
struct ktermios *old)
@@ -623,6 +665,7 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
unsigned int baud, quot;
unsigned int ulcon;
unsigned int umcon;
+ unsigned int udivslot = 0;
/*
* We don't support modem control lines.
@@ -644,6 +687,7 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
/* check to see if we need to change clock source */
if (ourport->clksrc != clksrc || ourport->baudclk != clk) {
+ dbg("selecting clock %p\n", clk);
s3c24xx_serial_setsource(port, clksrc);
if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) {
@@ -658,6 +702,13 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0;
}
+ if (ourport->info->has_divslot) {
+ unsigned int div = ourport->baudclk_rate / baud;
+
+ udivslot = udivslot_table[div & 15];
+ dbg("udivslot = %04x (div %d)\n", udivslot, div & 15);
+ }
+
switch (termios->c_cflag & CSIZE) {
case CS5:
dbg("config: 5bits/char\n");
@@ -697,12 +748,16 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
spin_lock_irqsave(&port->lock, flags);
- dbg("setting ulcon to %08x, brddiv to %d\n", ulcon, quot);
+ dbg("setting ulcon to %08x, brddiv to %d, udivslot %08x\n",
+ ulcon, quot, udivslot);
wr_regl(port, S3C2410_ULCON, ulcon);
wr_regl(port, S3C2410_UBRDIV, quot);
wr_regl(port, S3C2410_UMCON, umcon);
+ if (ourport->info->has_divslot)
+ wr_regl(port, S3C2443_DIVSLOT, udivslot);
+
dbg("uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n",
rd_regl(port, S3C2410_ULCON),
rd_regl(port, S3C2410_UCON),
diff --git a/drivers/serial/samsung.h b/drivers/serial/samsung.h
index 571d6b90d206..7afb94843a08 100644
--- a/drivers/serial/samsung.h
+++ b/drivers/serial/samsung.h
@@ -21,6 +21,10 @@ struct s3c24xx_uart_info {
unsigned long tx_fifoshift;
unsigned long tx_fifofull;
+ /* uart port features */
+
+ unsigned int has_divslot:1;
+
/* clock source control */
int (*get_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk);
View Lorry Controller Status