summaryrefslogtreecommitdiff
path: root/drivers/thermal
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/thermal')
-rw-r--r--drivers/thermal/Kconfig23
-rw-r--r--drivers/thermal/Makefile2
-rw-r--r--drivers/thermal/cpu_cooling.c56
-rw-r--r--drivers/thermal/imx_thermal.c32
-rw-r--r--drivers/thermal/int3403_thermal.c237
-rw-r--r--drivers/thermal/of-thermal.c849
-rw-r--r--drivers/thermal/samsung/exynos_thermal_common.c2
-rw-r--r--drivers/thermal/samsung/exynos_tmu.c1
-rw-r--r--drivers/thermal/thermal_core.c77
-rw-r--r--drivers/thermal/thermal_core.h9
-rw-r--r--drivers/thermal/ti-soc-thermal/ti-thermal-common.c77
-rw-r--r--drivers/thermal/x86_pkg_temp_thermal.c2
12 files changed, 1322 insertions, 45 deletions
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index f35a1f75b15b..35c066489a19 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -29,6 +29,19 @@ config THERMAL_HWMON
Say 'Y' here if you want all thermal sensors to
have hwmon sysfs interface too.
+config THERMAL_OF
+ bool
+ prompt "APIs to parse thermal data out of device tree"
+ depends on OF
+ default y
+ help
+ This options provides helpers to add the support to
+ read and parse thermal data definitions out of the
+ device tree blob.
+
+ Say 'Y' here if you need to build thermal infrastructure
+ based on device tree.
+
choice
prompt "Default Thermal governor"
default THERMAL_DEFAULT_GOV_STEP_WISE
@@ -79,6 +92,7 @@ config THERMAL_GOV_USER_SPACE
config CPU_THERMAL
bool "generic cpu cooling support"
depends on CPU_FREQ
+ depends on THERMAL_OF
help
This implements the generic cpu cooling mechanism through frequency
reduction. An ACPI version of this already exists
@@ -121,7 +135,7 @@ config SPEAR_THERMAL
config RCAR_THERMAL
tristate "Renesas R-Car thermal driver"
- depends on ARCH_SHMOBILE
+ depends on ARCH_SHMOBILE || COMPILE_TEST
help
Enable this to plug the R-Car thermal sensor driver into the Linux
thermal framework.
@@ -192,6 +206,13 @@ config X86_PKG_TEMP_THERMAL
two trip points which can be set by user to get notifications via thermal
notification methods.
+config ACPI_INT3403_THERMAL
+ tristate "ACPI INT3403 thermal driver"
+ depends on X86 && ACPI
+ help
+ This driver uses ACPI INT3403 device objects. If present, it will
+ register each INT3403 thermal sensor as a thermal zone.
+
menu "Texas Instruments thermal drivers"
source "drivers/thermal/ti-soc-thermal/Kconfig"
endmenu
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index 584b36319d51..54e4ec9eb5df 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -7,6 +7,7 @@ thermal_sys-y += thermal_core.o
# interface to/from other layers providing sensors
thermal_sys-$(CONFIG_THERMAL_HWMON) += thermal_hwmon.o
+thermal_sys-$(CONFIG_THERMAL_OF) += of-thermal.o
# governors
thermal_sys-$(CONFIG_THERMAL_GOV_FAIR_SHARE) += fair_share.o
@@ -29,3 +30,4 @@ obj-$(CONFIG_DB8500_CPUFREQ_COOLING) += db8500_cpufreq_cooling.o
obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o
obj-$(CONFIG_X86_PKG_TEMP_THERMAL) += x86_pkg_temp_thermal.o
obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal/
+obj-$(CONFIG_ACPI_INT3403_THERMAL) += int3403_thermal.o
diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c
index bb486b4ca48e..4246262c4bd2 100644
--- a/drivers/thermal/cpu_cooling.c
+++ b/drivers/thermal/cpu_cooling.c
@@ -424,18 +424,21 @@ static struct notifier_block thermal_cpufreq_notifier_block = {
};
/**
- * cpufreq_cooling_register - function to create cpufreq cooling device.
+ * __cpufreq_cooling_register - helper function to create cpufreq cooling device
+ * @np: a valid struct device_node to the cooling device device tree node
* @clip_cpus: cpumask of cpus where the frequency constraints will happen.
*
* This interface function registers the cpufreq cooling device with the name
* "thermal-cpufreq-%x". This api can support multiple instances of cpufreq
- * cooling devices.
+ * cooling devices. It also gives the opportunity to link the cooling device
+ * with a device tree node, in order to bind it via the thermal DT code.
*
* Return: a valid struct thermal_cooling_device pointer on success,
* on failure, it returns a corresponding ERR_PTR().
*/
-struct thermal_cooling_device *
-cpufreq_cooling_register(const struct cpumask *clip_cpus)
+static struct thermal_cooling_device *
+__cpufreq_cooling_register(struct device_node *np,
+ const struct cpumask *clip_cpus)
{
struct thermal_cooling_device *cool_dev;
struct cpufreq_cooling_device *cpufreq_dev = NULL;
@@ -474,8 +477,8 @@ cpufreq_cooling_register(const struct cpumask *clip_cpus)
snprintf(dev_name, sizeof(dev_name), "thermal-cpufreq-%d",
cpufreq_dev->id);
- cool_dev = thermal_cooling_device_register(dev_name, cpufreq_dev,
- &cpufreq_cooling_ops);
+ cool_dev = thermal_of_cooling_device_register(np, dev_name, cpufreq_dev,
+ &cpufreq_cooling_ops);
if (IS_ERR(cool_dev)) {
release_idr(&cpufreq_idr, cpufreq_dev->id);
kfree(cpufreq_dev);
@@ -495,9 +498,50 @@ cpufreq_cooling_register(const struct cpumask *clip_cpus)
return cool_dev;
}
+
+/**
+ * cpufreq_cooling_register - function to create cpufreq cooling device.
+ * @clip_cpus: cpumask of cpus where the frequency constraints will happen.
+ *
+ * This interface function registers the cpufreq cooling device with the name
+ * "thermal-cpufreq-%x". This api can support multiple instances of cpufreq
+ * cooling devices.
+ *
+ * Return: a valid struct thermal_cooling_device pointer on success,
+ * on failure, it returns a corresponding ERR_PTR().
+ */
+struct thermal_cooling_device *
+cpufreq_cooling_register(const struct cpumask *clip_cpus)
+{
+ return __cpufreq_cooling_register(NULL, clip_cpus);
+}
EXPORT_SYMBOL_GPL(cpufreq_cooling_register);
/**
+ * of_cpufreq_cooling_register - function to create cpufreq cooling device.
+ * @np: a valid struct device_node to the cooling device device tree node
+ * @clip_cpus: cpumask of cpus where the frequency constraints will happen.
+ *
+ * This interface function registers the cpufreq cooling device with the name
+ * "thermal-cpufreq-%x". This api can support multiple instances of cpufreq
+ * cooling devices. Using this API, the cpufreq cooling device will be
+ * linked to the device tree node provided.
+ *
+ * Return: a valid struct thermal_cooling_device pointer on success,
+ * on failure, it returns a corresponding ERR_PTR().
+ */
+struct thermal_cooling_device *
+of_cpufreq_cooling_register(struct device_node *np,
+ const struct cpumask *clip_cpus)
+{
+ if (!np)
+ return ERR_PTR(-EINVAL);
+
+ return __cpufreq_cooling_register(np, clip_cpus);
+}
+EXPORT_SYMBOL_GPL(of_cpufreq_cooling_register);
+
+/**
* cpufreq_cooling_unregister - function to remove cpufreq cooling device.
* @cdev: thermal cooling device pointer.
*
diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
index 1d6c801c1eb9..77a962f1837b 100644
--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c
@@ -490,27 +490,30 @@ static int imx_thermal_suspend(struct device *dev)
{
struct imx_thermal_data *data = dev_get_drvdata(dev);
struct regmap *map = data->tempmon;
- u32 val;
- regmap_read(map, TEMPSENSE0, &val);
- if ((val & TEMPSENSE0_POWER_DOWN) == 0) {
- /*
- * If a measurement is taking place, wait for a long enough
- * time for it to finish, and then check again. If it still
- * does not finish, something must go wrong.
- */
- udelay(50);
- regmap_read(map, TEMPSENSE0, &val);
- if ((val & TEMPSENSE0_POWER_DOWN) == 0)
- return -ETIMEDOUT;
- }
+ /*
+ * Need to disable thermal sensor, otherwise, when thermal core
+ * try to get temperature before thermal sensor resume, a wrong
+ * temperature will be read as the thermal sensor is powered
+ * down.
+ */
+ regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_MEASURE_TEMP);
+ regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_POWER_DOWN);
+ data->mode = THERMAL_DEVICE_DISABLED;
return 0;
}
static int imx_thermal_resume(struct device *dev)
{
- /* Nothing to do for now */
+ struct imx_thermal_data *data = dev_get_drvdata(dev);
+ struct regmap *map = data->tempmon;
+
+ /* Enabled thermal sensor after resume */
+ regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_POWER_DOWN);
+ regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_MEASURE_TEMP);
+ data->mode = THERMAL_DEVICE_ENABLED;
+
return 0;
}
#endif
@@ -522,6 +525,7 @@ static const struct of_device_id of_imx_thermal_match[] = {
{ .compatible = "fsl,imx6q-tempmon", },
{ /* end */ }
};
+MODULE_DEVICE_TABLE(of, of_imx_thermal_match);
static struct platform_driver imx_thermal = {
.driver = {
diff --git a/drivers/thermal/int3403_thermal.c b/drivers/thermal/int3403_thermal.c
new file mode 100644
index 000000000000..1301681d9a77
--- /dev/null
+++ b/drivers/thermal/int3403_thermal.c
@@ -0,0 +1,237 @@
+/*
+ * ACPI INT3403 thermal driver
+ * Copyright (c) 2013, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/acpi.h>
+#include <linux/thermal.h>
+
+#define INT3403_TYPE_SENSOR 0x03
+#define INT3403_PERF_CHANGED_EVENT 0x80
+#define INT3403_THERMAL_EVENT 0x90
+
+#define DECI_KELVIN_TO_MILLI_CELSIUS(t, off) (((t) - (off)) * 100)
+#define KELVIN_OFFSET 2732
+#define MILLI_CELSIUS_TO_DECI_KELVIN(t, off) (((t) / 100) + (off))
+
+#define ACPI_INT3403_CLASS "int3403"
+#define ACPI_INT3403_FILE_STATE "state"
+
+struct int3403_sensor {
+ struct thermal_zone_device *tzone;
+ unsigned long *thresholds;
+};
+
+static int sys_get_curr_temp(struct thermal_zone_device *tzone,
+ unsigned long *temp)
+{
+ struct acpi_device *device = tzone->devdata;
+ unsigned long long tmp;
+ acpi_status status;
+
+ status = acpi_evaluate_integer(device->handle, "_TMP", NULL, &tmp);
+ if (ACPI_FAILURE(status))
+ return -EIO;
+
+ *temp = DECI_KELVIN_TO_MILLI_CELSIUS(tmp, KELVIN_OFFSET);
+
+ return 0;
+}
+
+static int sys_get_trip_hyst(struct thermal_zone_device *tzone,
+ int trip, unsigned long *temp)
+{
+ struct acpi_device *device = tzone->devdata;
+ unsigned long long hyst;
+ acpi_status status;
+
+ status = acpi_evaluate_integer(device->handle, "GTSH", NULL, &hyst);
+ if (ACPI_FAILURE(status))
+ return -EIO;
+
+ *temp = DECI_KELVIN_TO_MILLI_CELSIUS(hyst, KELVIN_OFFSET);
+
+ return 0;
+}
+
+static int sys_get_trip_temp(struct thermal_zone_device *tzone,
+ int trip, unsigned long *temp)
+{
+ struct acpi_device *device = tzone->devdata;
+ struct int3403_sensor *obj = acpi_driver_data(device);
+
+ /*
+ * get_trip_temp is a mandatory callback but
+ * PATx method doesn't return any value, so return
+ * cached value, which was last set from user space.
+ */
+ *temp = obj->thresholds[trip];
+
+ return 0;
+}
+
+static int sys_get_trip_type(struct thermal_zone_device *thermal,
+ int trip, enum thermal_trip_type *type)
+{
+ /* Mandatory callback, may not mean much here */
+ *type = THERMAL_TRIP_PASSIVE;
+
+ return 0;
+}
+
+int sys_set_trip_temp(struct thermal_zone_device *tzone, int trip,
+ unsigned long temp)
+{
+ struct acpi_device *device = tzone->devdata;
+ acpi_status status;
+ char name[10];
+ int ret = 0;
+ struct int3403_sensor *obj = acpi_driver_data(device);
+
+ snprintf(name, sizeof(name), "PAT%d", trip);
+ if (acpi_has_method(device->handle, name)) {
+ status = acpi_execute_simple_method(device->handle, name,
+ MILLI_CELSIUS_TO_DECI_KELVIN(temp,
+ KELVIN_OFFSET));
+ if (ACPI_FAILURE(status))
+ ret = -EIO;
+ else
+ obj->thresholds[trip] = temp;
+ } else {
+ ret = -EIO;
+ dev_err(&device->dev, "sys_set_trip_temp: method not found\n");
+ }
+
+ return ret;
+}
+
+static struct thermal_zone_device_ops tzone_ops = {
+ .get_temp = sys_get_curr_temp,
+ .get_trip_temp = sys_get_trip_temp,
+ .get_trip_type = sys_get_trip_type,
+ .set_trip_temp = sys_set_trip_temp,
+ .get_trip_hyst = sys_get_trip_hyst,
+};
+
+static void acpi_thermal_notify(struct acpi_device *device, u32 event)
+{
+ struct int3403_sensor *obj;
+
+ if (!device)
+ return;
+
+ obj = acpi_driver_data(device);
+ if (!obj)
+ return;
+
+ switch (event) {
+ case INT3403_PERF_CHANGED_EVENT:
+ break;
+ case INT3403_THERMAL_EVENT:
+ thermal_zone_device_update(obj->tzone);
+ break;
+ default:
+ dev_err(&device->dev, "Unsupported event [0x%x]\n", event);
+ break;
+ }
+}
+
+static int acpi_int3403_add(struct acpi_device *device)
+{
+ int result = 0;
+ unsigned long long ptyp;
+ acpi_status status;
+ struct int3403_sensor *obj;
+ unsigned long long trip_cnt;
+ int trip_mask = 0;
+
+ if (!device)
+ return -EINVAL;
+
+ status = acpi_evaluate_integer(device->handle, "PTYP", NULL, &ptyp);
+ if (ACPI_FAILURE(status))
+ return -EINVAL;
+
+ if (ptyp != INT3403_TYPE_SENSOR)
+ return -EINVAL;
+
+ obj = devm_kzalloc(&device->dev, sizeof(*obj), GFP_KERNEL);
+ if (!obj)
+ return -ENOMEM;
+
+ device->driver_data = obj;
+
+ status = acpi_evaluate_integer(device->handle, "PATC", NULL,
+ &trip_cnt);
+ if (ACPI_FAILURE(status))
+ trip_cnt = 0;
+
+ if (trip_cnt) {
+ /* We have to cache, thresholds can't be readback */
+ obj->thresholds = devm_kzalloc(&device->dev,
+ sizeof(*obj->thresholds) * trip_cnt,
+ GFP_KERNEL);
+ if (!obj->thresholds)
+ return -ENOMEM;
+ trip_mask = BIT(trip_cnt) - 1;
+ }
+ obj->tzone = thermal_zone_device_register(acpi_device_bid(device),
+ trip_cnt, trip_mask, device, &tzone_ops,
+ NULL, 0, 0);
+ if (IS_ERR(obj->tzone)) {
+ result = PTR_ERR(obj->tzone);
+ return result;
+ }
+
+ strcpy(acpi_device_name(device), "INT3403");
+ strcpy(acpi_device_class(device), ACPI_INT3403_CLASS);
+
+ return 0;
+}
+
+static int acpi_int3403_remove(struct acpi_device *device)
+{
+ struct int3403_sensor *obj;
+
+ obj = acpi_driver_data(device);
+ thermal_zone_device_unregister(obj->tzone);
+
+ return 0;
+}
+
+ACPI_MODULE_NAME("int3403");
+static const struct acpi_device_id int3403_device_ids[] = {
+ {"INT3403", 0},
+ {"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, int3403_device_ids);
+
+static struct acpi_driver acpi_int3403_driver = {
+ .name = "INT3403",
+ .class = ACPI_INT3403_CLASS,
+ .ids = int3403_device_ids,
+ .ops = {
+ .add = acpi_int3403_add,
+ .remove = acpi_int3403_remove,
+ .notify = acpi_thermal_notify,
+ },
+};
+
+module_acpi_driver(acpi_int3403_driver);
+
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("ACPI INT3403 thermal driver");
diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c
new file mode 100644
index 000000000000..04b1be7fa018
--- /dev/null
+++ b/drivers/thermal/of-thermal.c
@@ -0,0 +1,849 @@
+/*
+ * of-thermal.c - Generic Thermal Management device tree support.
+ *
+ * Copyright (C) 2013 Texas Instruments
+ * Copyright (C) 2013 Eduardo Valentin <eduardo.valentin@ti.com>
+ *
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+#include <linux/thermal.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/string.h>
+
+#include "thermal_core.h"
+
+/*** Private data structures to represent thermal device tree data ***/
+
+/**
+ * struct __thermal_trip - representation of a point in temperature domain
+ * @np: pointer to struct device_node that this trip point was created from
+ * @temperature: temperature value in miliCelsius
+ * @hysteresis: relative hysteresis in miliCelsius
+ * @type: trip point type
+ */
+
+struct __thermal_trip {
+ struct device_node *np;
+ unsigned long int temperature;
+ unsigned long int hysteresis;
+ enum thermal_trip_type type;
+};
+
+/**
+ * struct __thermal_bind_param - a match between trip and cooling device
+ * @cooling_device: a pointer to identify the referred cooling device
+ * @trip_id: the trip point index
+ * @usage: the percentage (from 0 to 100) of cooling contribution
+ * @min: minimum cooling state used at this trip point
+ * @max: maximum cooling state used at this trip point
+ */
+
+struct __thermal_bind_params {
+ struct device_node *cooling_device;
+ unsigned int trip_id;
+ unsigned int usage;
+ unsigned long min;
+ unsigned long max;
+};
+
+/**
+ * struct __thermal_zone - internal representation of a thermal zone
+ * @mode: current thermal zone device mode (enabled/disabled)
+ * @passive_delay: polling interval while passive cooling is activated
+ * @polling_delay: zone polling interval
+ * @ntrips: number of trip points
+ * @trips: an array of trip points (0..ntrips - 1)
+ * @num_tbps: number of thermal bind params
+ * @tbps: an array of thermal bind params (0..num_tbps - 1)
+ * @sensor_data: sensor private data used while reading temperature and trend
+ * @get_temp: sensor callback to read temperature
+ * @get_trend: sensor callback to read temperature trend
+ */
+
+struct __thermal_zone {
+ enum thermal_device_mode mode;
+ int passive_delay;
+ int polling_delay;
+
+ /* trip data */
+ int ntrips;
+ struct __thermal_trip *trips;
+
+ /* cooling binding data */
+ int num_tbps;
+ struct __thermal_bind_params *tbps;
+
+ /* sensor interface */
+ void *sensor_data;
+ int (*get_temp)(void *, long *);
+ int (*get_trend)(void *, long *);
+};
+
+/*** DT thermal zone device callbacks ***/
+
+static int of_thermal_get_temp(struct thermal_zone_device *tz,
+ unsigned long *temp)
+{
+ struct __thermal_zone *data = tz->devdata;
+
+ if (!data->get_temp)
+ return -EINVAL;
+
+ return data->get_temp(data->sensor_data, temp);
+}
+
+static int of_thermal_get_trend(struct thermal_zone_device *tz, int trip,
+ enum thermal_trend *trend)
+{
+ struct __thermal_zone *data = tz->devdata;
+ long dev_trend;
+ int r;
+
+ if (!data->get_trend)
+ return -EINVAL;
+
+ r = data->get_trend(data->sensor_data, &dev_trend);
+ if (r)
+ return r;
+
+ /* TODO: These intervals might have some thresholds, but in core code */
+ if (dev_trend > 0)
+ *trend = THERMAL_TREND_RAISING;
+ else if (dev_trend < 0)
+ *trend = THERMAL_TREND_DROPPING;
+ else
+ *trend = THERMAL_TREND_STABLE;
+
+ return 0;
+}
+
+static int of_thermal_bind(struct thermal_zone_device *thermal,
+ struct thermal_cooling_device *cdev)
+{
+ struct __thermal_zone *data = thermal->devdata;
+ int i;
+
+ if (!data || IS_ERR(data))
+ return -ENODEV;
+
+ /* find where to bind */
+ for (i = 0; i < data->num_tbps; i++) {
+ struct __thermal_bind_params *tbp = data->tbps + i;
+
+ if (tbp->cooling_device == cdev->np) {
+ int ret;
+
+ ret = thermal_zone_bind_cooling_device(thermal,
+ tbp->trip_id, cdev,
+ tbp->min,
+ tbp->max);
+ if (ret)
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int of_thermal_unbind(struct thermal_zone_device *thermal,
+ struct thermal_cooling_device *cdev)
+{
+ struct __thermal_zone *data = thermal->devdata;
+ int i;
+
+ if (!data || IS_ERR(data))
+ return -ENODEV;
+
+ /* find where to unbind */
+ for (i = 0; i < data->num_tbps; i++) {
+ struct __thermal_bind_params *tbp = data->tbps + i;
+
+ if (tbp->cooling_device == cdev->np) {
+ int ret;
+
+ ret = thermal_zone_unbind_cooling_device(thermal,
+ tbp->trip_id, cdev);
+ if (ret)
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int of_thermal_get_mode(struct thermal_zone_device *tz,
+ enum thermal_device_mode *mode)
+{
+ struct __thermal_zone *data = tz->devdata;
+
+ *mode = data->mode;
+
+ return 0;
+}
+
+static int of_thermal_set_mode(struct thermal_zone_device *tz,
+ enum thermal_device_mode mode)
+{
+ struct __thermal_zone *data = tz->devdata;
+
+ mutex_lock(&tz->lock);
+
+ if (mode == THERMAL_DEVICE_ENABLED)
+ tz->polling_delay = data->polling_delay;
+ else
+ tz->polling_delay = 0;
+
+ mutex_unlock(&tz->lock);
+
+ data->mode = mode;
+ thermal_zone_device_update(tz);
+
+ return 0;
+}
+
+static int of_thermal_get_trip_type(struct thermal_zone_device *tz, int trip,
+ enum thermal_trip_type *type)
+{
+ struct __thermal_zone *data = tz->devdata;
+
+ if (trip >= data->ntrips || trip < 0)
+ return -EDOM;
+
+ *type = data->trips[trip].type;
+
+ return 0;
+}
+
+static int of_thermal_get_trip_temp(struct thermal_zone_device *tz, int trip,
+ unsigned long *temp)
+{
+ struct __thermal_zone *data = tz->devdata;
+
+ if (trip >= data->ntrips || trip < 0)
+ return -EDOM;
+
+ *temp = data->trips[trip].temperature;
+
+ return 0;
+}
+
+static int of_thermal_set_trip_temp(struct thermal_zone_device *tz, int trip,
+ unsigned long temp)
+{
+ struct __thermal_zone *data = tz->devdata;
+
+ if (trip >= data->ntrips || trip < 0)
+ return -EDOM;
+
+ /* thermal framework should take care of data->mask & (1 << trip) */
+ data->trips[trip].temperature = temp;
+
+ return 0;
+}
+
+static int of_thermal_get_trip_hyst(struct thermal_zone_device *tz, int trip,
+ unsigned long *hyst)
+{
+ struct __thermal_zone *data = tz->devdata;
+
+ if (trip >= data->ntrips || trip < 0)
+ return -EDOM;
+
+ *hyst = data->trips[trip].hysteresis;
+
+ return 0;
+}
+
+static int of_thermal_set_trip_hyst(struct thermal_zone_device *tz, int trip,
+ unsigned long hyst)
+{
+ struct __thermal_zone *data = tz->devdata;
+
+ if (trip >= data->ntrips || trip < 0)
+ return -EDOM;
+
+ /* thermal framework should take care of data->mask & (1 << trip) */
+ data->trips[trip].hysteresis = hyst;
+
+ return 0;
+}
+
+static int of_thermal_get_crit_temp(struct thermal_zone_device *tz,
+ unsigned long *temp)
+{
+ struct __thermal_zone *data = tz->devdata;
+ int i;
+
+ for (i = 0; i < data->ntrips; i++)
+ if (data->trips[i].type == THERMAL_TRIP_CRITICAL) {
+ *temp = data->trips[i].temperature;
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static struct thermal_zone_device_ops of_thermal_ops = {
+ .get_mode = of_thermal_get_mode,
+ .set_mode = of_thermal_set_mode,
+
+ .get_trip_type = of_thermal_get_trip_type,
+ .get_trip_temp = of_thermal_get_trip_temp,
+ .set_trip_temp = of_thermal_set_trip_temp,
+ .get_trip_hyst = of_thermal_get_trip_hyst,
+ .set_trip_hyst = of_thermal_set_trip_hyst,
+ .get_crit_temp = of_thermal_get_crit_temp,
+
+ .bind = of_thermal_bind,
+ .unbind = of_thermal_unbind,
+};
+
+/*** sensor API ***/
+
+static struct thermal_zone_device *
+thermal_zone_of_add_sensor(struct device_node *zone,
+ struct device_node *sensor, void *data,
+ int (*get_temp)(void *, long *),
+ int (*get_trend)(void *, long *))
+{
+ struct thermal_zone_device *tzd;
+ struct __thermal_zone *tz;
+
+ tzd = thermal_zone_get_zone_by_name(zone->name);
+ if (IS_ERR(tzd))
+ return ERR_PTR(-EPROBE_DEFER);
+
+ tz = tzd->devdata;
+
+ mutex_lock(&tzd->lock);
+ tz->get_temp = get_temp;
+ tz->get_trend = get_trend;
+ tz->sensor_data = data;
+
+ tzd->ops->get_temp = of_thermal_get_temp;
+ tzd->ops->get_trend = of_thermal_get_trend;
+ mutex_unlock(&tzd->lock);
+
+ return tzd;
+}
+
+/**
+ * thermal_zone_of_sensor_register - registers a sensor to a DT thermal zone
+ * @dev: a valid struct device pointer of a sensor device. Must contain
+ * a valid .of_node, for the sensor node.
+ * @sensor_id: a sensor identifier, in case the sensor IP has more
+ * than one sensors
+ * @data: a private pointer (owned by the caller) that will be passed
+ * back, when a temperature reading is needed.
+ * @get_temp: a pointer to a function that reads the sensor temperature.
+ * @get_trend: a pointer to a function that reads the sensor temperature trend.
+ *
+ * This function will search the list of thermal zones described in device
+ * tree and look for the zone that refer to the sensor device pointed by
+ * @dev->of_node as temperature providers. For the zone pointing to the
+ * sensor node, the sensor will be added to the DT thermal zone device.
+ *
+ * The thermal zone temperature is provided by the @get_temp function
+ * pointer. When called, it will have the private pointer @data back.
+ *
+ * The thermal zone temperature trend is provided by the @get_trend function
+ * pointer. When called, it will have the private pointer @data back.
+ *
+ * TODO:
+ * 01 - This function must enqueue the new sensor instead of using
+ * it as the only source of temperature values.
+ *
+ * 02 - There must be a way to match the sensor with all thermal zones
+ * that refer to it.
+ *
+ * Return: On success returns a valid struct thermal_zone_device,
+ * otherwise, it returns a corresponding ERR_PTR(). Caller must
+ * check the return value with help of IS_ERR() helper.
+ */
+struct thermal_zone_device *
+thermal_zone_of_sensor_register(struct device *dev, int sensor_id,
+ void *data, int (*get_temp)(void *, long *),
+ int (*get_trend)(void *, long *))
+{
+ struct device_node *np, *child, *sensor_np;
+
+ np = of_find_node_by_name(NULL, "thermal-zones");
+ if (!np)
+ return ERR_PTR(-ENODEV);
+
+ if (!dev || !dev->of_node)
+ return ERR_PTR(-EINVAL);
+
+ sensor_np = dev->of_node;
+
+ for_each_child_of_node(np, child) {
+ struct of_phandle_args sensor_specs;
+ int ret, id;
+
+ /* For now, thermal framework supports only 1 sensor per zone */
+ ret = of_parse_phandle_with_args(child, "thermal-sensors",
+ "#thermal-sensor-cells",
+ 0, &sensor_specs);
+ if (ret)
+ continue;
+
+ if (sensor_specs.args_count >= 1) {
+ id = sensor_specs.args[0];
+ WARN(sensor_specs.args_count > 1,
+ "%s: too many cells in sensor specifier %d\n",
+ sensor_specs.np->name, sensor_specs.args_count);
+ } else {
+ id = 0;
+ }
+
+ if (sensor_specs.np == sensor_np && id == sensor_id) {
+ of_node_put(np);
+ return thermal_zone_of_add_sensor(child, sensor_np,
+ data,
+ get_temp,
+ get_trend);
+ }
+ }
+ of_node_put(np);
+
+ return ERR_PTR(-ENODEV);
+}
+EXPORT_SYMBOL_GPL(thermal_zone_of_sensor_register);
+
+/**
+ * thermal_zone_of_sensor_unregister - unregisters a sensor from a DT thermal zone
+ * @dev: a valid struct device pointer of a sensor device. Must contain
+ * a valid .of_node, for the sensor node.
+ * @tzd: a pointer to struct thermal_zone_device where the sensor is registered.
+ *
+ * This function removes the sensor callbacks and private data from the
+ * thermal zone device registered with thermal_zone_of_sensor_register()
+ * API. It will also silent the zone by remove the .get_temp() and .get_trend()
+ * thermal zone device callbacks.
+ *
+ * TODO: When the support to several sensors per zone is added, this
+ * function must search the sensor list based on @dev parameter.
+ *
+ */
+void thermal_zone_of_sensor_unregister(struct device *dev,
+ struct thermal_zone_device *tzd)
+{
+ struct __thermal_zone *tz;
+
+ if (!dev || !tzd || !tzd->devdata)
+ return;
+
+ tz = tzd->devdata;
+
+ /* no __thermal_zone, nothing to be done */
+ if (!tz)
+ return;
+
+ mutex_lock(&tzd->lock);
+ tzd->ops->get_temp = NULL;
+ tzd->ops->get_trend = NULL;
+
+ tz->get_temp = NULL;
+ tz->get_trend = NULL;
+ tz->sensor_data = NULL;
+ mutex_unlock(&tzd->lock);
+}
+EXPORT_SYMBOL_GPL(thermal_zone_of_sensor_unregister);
+
+/*** functions parsing device tree nodes ***/
+
+/**
+ * thermal_of_populate_bind_params - parse and fill cooling map data
+ * @np: DT node containing a cooling-map node
+ * @__tbp: data structure to be filled with cooling map info
+ * @trips: array of thermal zone trip points
+ * @ntrips: number of trip points inside trips.
+ *
+ * This function parses a cooling-map type of node represented by
+ * @np parameter and fills the read data into @__tbp data structure.
+ * It needs the already parsed array of trip points of the thermal zone
+ * in consideration.
+ *
+ * Return: 0 on success, proper error code otherwise
+ */
+static int thermal_of_populate_bind_params(struct device_node *np,
+ struct __thermal_bind_params *__tbp,
+ struct __thermal_trip *trips,
+ int ntrips)
+{
+ struct of_phandle_args cooling_spec;
+ struct device_node *trip;
+ int ret, i;
+ u32 prop;
+
+ /* Default weight. Usage is optional */
+ __tbp->usage = 0;
+ ret = of_property_read_u32(np, "contribution", &prop);
+ if (ret == 0)
+ __tbp->usage = prop;
+
+ trip = of_parse_phandle(np, "trip", 0);
+ if (!trip) {
+ pr_err("missing trip property\n");
+ return -ENODEV;
+ }
+
+ /* match using device_node */
+ for (i = 0; i < ntrips; i++)
+ if (trip == trips[i].np) {
+ __tbp->trip_id = i;
+ break;
+ }
+
+ if (i == ntrips) {
+ ret = -ENODEV;
+ goto end;
+ }
+
+ ret = of_parse_phandle_with_args(np, "cooling-device", "#cooling-cells",
+ 0, &cooling_spec);
+ if (ret < 0) {
+ pr_err("missing cooling_device property\n");
+ goto end;
+ }
+ __tbp->cooling_device = cooling_spec.np;
+ if (cooling_spec.args_count >= 2) { /* at least min and max */
+ __tbp->min = cooling_spec.args[0];
+ __tbp->max = cooling_spec.args[1];
+ } else {
+ pr_err("wrong reference to cooling device, missing limits\n");
+ }
+
+end:
+ of_node_put(trip);
+
+ return ret;
+}
+
+/**
+ * It maps 'enum thermal_trip_type' found in include/linux/thermal.h
+ * into the device tree binding of 'trip', property type.
+ */
+static const char * const trip_types[] = {
+ [THERMAL_TRIP_ACTIVE] = "active",
+ [THERMAL_TRIP_PASSIVE] = "passive",
+ [THERMAL_TRIP_HOT] = "hot",
+ [THERMAL_TRIP_CRITICAL] = "critical",
+};
+
+/**
+ * thermal_of_get_trip_type - Get phy mode for given device_node
+ * @np: Pointer to the given device_node
+ * @type: Pointer to resulting trip type
+ *
+ * The function gets trip type string from property 'type',
+ * and store its index in trip_types table in @type,
+ *
+ * Return: 0 on success, or errno in error case.
+ */
+static int thermal_of_get_trip_type(struct device_node *np,
+ enum thermal_trip_type *type)
+{
+ const char *t;
+ int err, i;
+
+ err = of_property_read_string(np, "type", &t);
+ if (err < 0)
+ return err;
+
+ for (i = 0; i < ARRAY_SIZE(trip_types); i++)
+ if (!strcasecmp(t, trip_types[i])) {
+ *type = i;
+ return 0;
+ }
+
+ return -ENODEV;
+}
+
+/**
+ * thermal_of_populate_trip - parse and fill one trip point data
+ * @np: DT node containing a trip point node
+ * @trip: trip point data structure to be filled up
+ *
+ * This function parses a trip point type of node represented by
+ * @np parameter and fills the read data into @trip data structure.
+ *
+ * Return: 0 on success, proper error code otherwise
+ */
+static int thermal_of_populate_trip(struct device_node *np,
+ struct __thermal_trip *trip)
+{
+ int prop;
+ int ret;
+
+ ret = of_property_read_u32(np, "temperature", &prop);
+ if (ret < 0) {
+ pr_err("missing temperature property\n");
+ return ret;
+ }
+ trip->temperature = prop;
+
+ ret = of_property_read_u32(np, "hysteresis", &prop);
+ if (ret < 0) {
+ pr_err("missing hysteresis property\n");
+ return ret;
+ }
+ trip->hysteresis = prop;
+
+ ret = thermal_of_get_trip_type(np, &trip->type);
+ if (ret < 0) {
+ pr_err("wrong trip type property\n");
+ return ret;
+ }
+
+ /* Required for cooling map matching */
+ trip->np = np;
+
+ return 0;
+}
+
+/**
+ * thermal_of_build_thermal_zone - parse and fill one thermal zone data
+ * @np: DT node containing a thermal zone node
+ *
+ * This function parses a thermal zone type of node represented by
+ * @np parameter and fills the read data into a __thermal_zone data structure
+ * and return this pointer.
+ *
+ * TODO: Missing properties to parse: thermal-sensor-names and coefficients
+ *
+ * Return: On success returns a valid struct __thermal_zone,
+ * otherwise, it returns a corresponding ERR_PTR(). Caller must
+ * check the return value with help of IS_ERR() helper.
+ */
+static struct __thermal_zone *
+thermal_of_build_thermal_zone(struct device_node *np)
+{
+ struct device_node *child = NULL, *gchild;
+ struct __thermal_zone *tz;
+ int ret, i;
+ u32 prop;
+
+ if (!np) {
+ pr_err("no thermal zone np\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ tz = kzalloc(sizeof(*tz), GFP_KERNEL);
+ if (!tz)
+ return ERR_PTR(-ENOMEM);
+
+ ret = of_property_read_u32(np, "polling-delay-passive", &prop);
+ if (ret < 0) {
+ pr_err("missing polling-delay-passive property\n");
+ goto free_tz;
+ }
+ tz->passive_delay = prop;
+
+ ret = of_property_read_u32(np, "polling-delay", &prop);
+ if (ret < 0) {
+ pr_err("missing polling-delay property\n");
+ goto free_tz;
+ }
+ tz->polling_delay = prop;
+
+ /* trips */
+ child = of_get_child_by_name(np, "trips");
+
+ /* No trips provided */
+ if (!child)
+ goto finish;
+
+ tz->ntrips = of_get_child_count(child);
+ if (tz->ntrips == 0) /* must have at least one child */
+ goto finish;
+
+ tz->trips = kzalloc(tz->ntrips * sizeof(*tz->trips), GFP_KERNEL);
+ if (!tz->trips) {
+ ret = -ENOMEM;
+ goto free_tz;
+ }
+
+ i = 0;
+ for_each_child_of_node(child, gchild) {
+ ret = thermal_of_populate_trip(gchild, &tz->trips[i++]);
+ if (ret)
+ goto free_trips;
+ }
+
+ of_node_put(child);
+
+ /* cooling-maps */
+ child = of_get_child_by_name(np, "cooling-maps");
+
+ /* cooling-maps not provided */
+ if (!child)
+ goto finish;
+
+ tz->num_tbps = of_get_child_count(child);
+ if (tz->num_tbps == 0)
+ goto finish;
+
+ tz->tbps = kzalloc(tz->num_tbps * sizeof(*tz->tbps), GFP_KERNEL);
+ if (!tz->tbps) {
+ ret = -ENOMEM;
+ goto free_trips;
+ }
+
+ i = 0;
+ for_each_child_of_node(child, gchild)
+ ret = thermal_of_populate_bind_params(gchild, &tz->tbps[i++],
+ tz->trips, tz->ntrips);
+ if (ret)
+ goto free_tbps;
+
+finish:
+ of_node_put(child);
+ tz->mode = THERMAL_DEVICE_DISABLED;
+
+ return tz;
+
+free_tbps:
+ kfree(tz->tbps);
+free_trips:
+ kfree(tz->trips);
+free_tz:
+ kfree(tz);
+ of_node_put(child);
+
+ return ERR_PTR(ret);
+}
+
+static inline void of_thermal_free_zone(struct __thermal_zone *tz)
+{
+ kfree(tz->tbps);
+ kfree(tz->trips);
+ kfree(tz);
+}
+
+/**
+ * of_parse_thermal_zones - parse device tree thermal data
+ *
+ * Initialization function that can be called by machine initialization
+ * code to parse thermal data and populate the thermal framework
+ * with hardware thermal zones info. This function only parses thermal zones.
+ * Cooling devices and sensor devices nodes are supposed to be parsed
+ * by their respective drivers.
+ *
+ * Return: 0 on success, proper error code otherwise
+ *
+ */
+int __init of_parse_thermal_zones(void)
+{
+ struct device_node *np, *child;
+ struct __thermal_zone *tz;
+ struct thermal_zone_device_ops *ops;
+
+ np = of_find_node_by_name(NULL, "thermal-zones");
+ if (!np) {
+ pr_debug("unable to find thermal zones\n");
+ return 0; /* Run successfully on systems without thermal DT */
+ }
+
+ for_each_child_of_node(np, child) {
+ struct thermal_zone_device *zone;
+ struct thermal_zone_params *tzp;
+
+ tz = thermal_of_build_thermal_zone(child);
+ if (IS_ERR(tz)) {
+ pr_err("failed to build thermal zone %s: %ld\n",
+ child->name,
+ PTR_ERR(tz));
+ continue;
+ }
+
+ ops = kmemdup(&of_thermal_ops, sizeof(*ops), GFP_KERNEL);
+ if (!ops)
+ goto exit_free;
+
+ tzp = kzalloc(sizeof(*tzp), GFP_KERNEL);
+ if (!tzp) {
+ kfree(ops);
+ goto exit_free;
+ }
+
+ /* No hwmon because there might be hwmon drivers registering */
+ tzp->no_hwmon = true;
+
+ zone = thermal_zone_device_register(child->name, tz->ntrips,
+ 0, tz,
+ ops, tzp,
+ tz->passive_delay,
+ tz->polling_delay);
+ if (IS_ERR(zone)) {
+ pr_err("Failed to build %s zone %ld\n", child->name,
+ PTR_ERR(zone));
+ kfree(tzp);
+ kfree(ops);
+ of_thermal_free_zone(tz);
+ /* attempting to build remaining zones still */
+ }
+ }
+
+ return 0;
+
+exit_free:
+ of_thermal_free_zone(tz);
+
+ /* no memory available, so free what we have built */
+ of_thermal_destroy_zones();
+
+ return -ENOMEM;
+}
+
+/**
+ * of_thermal_destroy_zones - remove all zones parsed and allocated resources
+ *
+ * Finds all zones parsed and added to the thermal framework and remove them
+ * from the system, together with their resources.
+ *
+ */
+void of_thermal_destroy_zones(void)
+{
+ struct device_node *np, *child;
+
+ np = of_find_node_by_name(NULL, "thermal-zones");
+ if (!np) {
+ pr_err("unable to find thermal zones\n");
+ return;
+ }
+
+ for_each_child_of_node(np, child) {
+ struct thermal_zone_device *zone;
+
+ zone = thermal_zone_get_zone_by_name(child->name);
+ if (IS_ERR(zone))
+ continue;
+
+ thermal_zone_device_unregister(zone);
+ kfree(zone->tzp);
+ kfree(zone->ops);
+ of_thermal_free_zone(zone->devdata);
+ }
+}
diff --git a/drivers/thermal/samsung/exynos_thermal_common.c b/drivers/thermal/samsung/exynos_thermal_common.c
index c2301da08ac7..3f5ad25ddca8 100644
--- a/drivers/thermal/samsung/exynos_thermal_common.c
+++ b/drivers/thermal/samsung/exynos_thermal_common.c
@@ -280,7 +280,7 @@ static int exynos_get_trend(struct thermal_zone_device *thermal,
return 0;
}
/* Operation callback functions for thermal zone */
-static struct thermal_zone_device_ops const exynos_dev_ops = {
+static struct thermal_zone_device_ops exynos_dev_ops = {
.bind = exynos_bind,
.unbind = exynos_unbind,
.get_temp = exynos_get_temp,
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 32f38b90c4f6..0d96a510389f 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -205,6 +205,7 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
skip_calib_data:
if (pdata->max_trigger_level > MAX_THRESHOLD_LEVS) {
dev_err(&pdev->dev, "Invalid max trigger level\n");
+ ret = -EINVAL;
goto out;
}
diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index 30a02add9e2e..a621e90cbf40 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -34,6 +34,7 @@
#include <linux/thermal.h>
#include <linux/reboot.h>
#include <linux/string.h>
+#include <linux/of.h>
#include <net/netlink.h>
#include <net/genetlink.h>
@@ -403,7 +404,7 @@ int thermal_zone_get_temp(struct thermal_zone_device *tz, unsigned long *temp)
enum thermal_trip_type type;
#endif
- if (!tz || IS_ERR(tz))
+ if (!tz || IS_ERR(tz) || !tz->ops->get_temp)
goto exit;
mutex_lock(&tz->lock);
@@ -459,6 +460,9 @@ void thermal_zone_device_update(struct thermal_zone_device *tz)
{
int count;
+ if (!tz->ops->get_temp)
+ return;
+
update_temperature(tz);
for (count = 0; count < tz->trips; count++)
@@ -1055,7 +1059,8 @@ static struct class thermal_class = {
};
/**
- * thermal_cooling_device_register() - register a new thermal cooling device
+ * __thermal_cooling_device_register() - register a new thermal cooling device
+ * @np: a pointer to a device tree node.
* @type: the thermal cooling device type.
* @devdata: device private data.
* @ops: standard thermal cooling devices callbacks.
@@ -1063,13 +1068,16 @@ static struct class thermal_class = {
* This interface function adds a new thermal cooling device (fan/processor/...)
* to /sys/class/thermal/ folder as cooling_device[0-*]. It tries to bind itself
* to all the thermal zone devices registered at the same time.
+ * It also gives the opportunity to link the cooling device to a device tree
+ * node, so that it can be bound to a thermal zone created out of device tree.
*
* Return: a pointer to the created struct thermal_cooling_device or an
* ERR_PTR. Caller must check return value with IS_ERR*() helpers.
*/
-struct thermal_cooling_device *
-thermal_cooling_device_register(char *type, void *devdata,
- const struct thermal_cooling_device_ops *ops)
+static struct thermal_cooling_device *
+__thermal_cooling_device_register(struct device_node *np,
+ char *type, void *devdata,
+ const struct thermal_cooling_device_ops *ops)
{
struct thermal_cooling_device *cdev;
int result;
@@ -1094,6 +1102,7 @@ thermal_cooling_device_register(char *type, void *devdata,
strlcpy(cdev->type, type ? : "", sizeof(cdev->type));
mutex_init(&cdev->lock);
INIT_LIST_HEAD(&cdev->thermal_instances);
+ cdev->np = np;
cdev->ops = ops;
cdev->updated = true;
cdev->device.class = &thermal_class;
@@ -1136,9 +1145,53 @@ unregister:
device_unregister(&cdev->device);
return ERR_PTR(result);
}
+
+/**
+ * thermal_cooling_device_register() - register a new thermal cooling device
+ * @type: the thermal cooling device type.
+ * @devdata: device private data.
+ * @ops: standard thermal cooling devices callbacks.
+ *
+ * This interface function adds a new thermal cooling device (fan/processor/...)
+ * to /sys/class/thermal/ folder as cooling_device[0-*]. It tries to bind itself
+ * to all the thermal zone devices registered at the same time.
+ *
+ * Return: a pointer to the created struct thermal_cooling_device or an
+ * ERR_PTR. Caller must check return value with IS_ERR*() helpers.
+ */
+struct thermal_cooling_device *
+thermal_cooling_device_register(char *type, void *devdata,
+ const struct thermal_cooling_device_ops *ops)
+{
+ return __thermal_cooling_device_register(NULL, type, devdata, ops);
+}
EXPORT_SYMBOL_GPL(thermal_cooling_device_register);
/**
+ * thermal_of_cooling_device_register() - register an OF thermal cooling device
+ * @np: a pointer to a device tree node.
+ * @type: the thermal cooling device type.
+ * @devdata: device private data.
+ * @ops: standard thermal cooling devices callbacks.
+ *
+ * This function will register a cooling device with device tree node reference.
+ * This interface function adds a new thermal cooling device (fan/processor/...)
+ * to /sys/class/thermal/ folder as cooling_device[0-*]. It tries to bind itself
+ * to all the thermal zone devices registered at the same time.
+ *
+ * Return: a pointer to the created struct thermal_cooling_device or an
+ * ERR_PTR. Caller must check return value with IS_ERR*() helpers.
+ */
+struct thermal_cooling_device *
+thermal_of_cooling_device_register(struct device_node *np,
+ char *type, void *devdata,
+ const struct thermal_cooling_device_ops *ops)
+{
+ return __thermal_cooling_device_register(np, type, devdata, ops);
+}
+EXPORT_SYMBOL_GPL(thermal_of_cooling_device_register);
+
+/**
* thermal_cooling_device_unregister - removes the registered thermal cooling device
* @cdev: the thermal cooling device to remove.
*
@@ -1376,7 +1429,7 @@ static void remove_trip_attrs(struct thermal_zone_device *tz)
*/
struct thermal_zone_device *thermal_zone_device_register(const char *type,
int trips, int mask, void *devdata,
- const struct thermal_zone_device_ops *ops,
+ struct thermal_zone_device_ops *ops,
const struct thermal_zone_params *tzp,
int passive_delay, int polling_delay)
{
@@ -1392,7 +1445,7 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type,
if (trips > THERMAL_MAX_TRIPS || trips < 0 || mask >> trips)
return ERR_PTR(-EINVAL);
- if (!ops || !ops->get_temp)
+ if (!ops)
return ERR_PTR(-EINVAL);
if (trips > 0 && (!ops->get_trip_type || !ops->get_trip_temp))
@@ -1496,6 +1549,9 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type,
INIT_DELAYED_WORK(&(tz->poll_queue), thermal_zone_device_check);
+ if (!tz->ops->get_temp)
+ thermal_zone_device_set_polling(tz, 0);
+
thermal_zone_device_update(tz);
if (!result)
@@ -1746,8 +1802,14 @@ static int __init thermal_init(void)
if (result)
goto unregister_class;
+ result = of_parse_thermal_zones();
+ if (result)
+ goto exit_netlink;
+
return 0;
+exit_netlink:
+ genetlink_exit();
unregister_governors:
thermal_unregister_governors();
unregister_class:
@@ -1763,6 +1825,7 @@ error:
static void __exit thermal_exit(void)
{
+ of_thermal_destroy_zones();
genetlink_exit();
class_unregister(&thermal_class);
thermal_unregister_governors();
diff --git a/drivers/thermal/thermal_core.h b/drivers/thermal/thermal_core.h
index 7cf2f6626251..3db339fb636f 100644
--- a/drivers/thermal/thermal_core.h
+++ b/drivers/thermal/thermal_core.h
@@ -77,4 +77,13 @@ static inline int thermal_gov_user_space_register(void) { return 0; }
static inline void thermal_gov_user_space_unregister(void) {}
#endif /* CONFIG_THERMAL_GOV_USER_SPACE */
+/* device tree support */
+#ifdef CONFIG_THERMAL_OF
+int of_parse_thermal_zones(void);
+void of_thermal_destroy_zones(void);
+#else
+static inline int of_parse_thermal_zones(void) { return 0; }
+static inline void of_thermal_destroy_zones(void) { }
+#endif
+
#endif /* __THERMAL_CORE_H__ */
diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
index 5a47cc8c8f85..9eec26dc0448 100644
--- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
+++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
@@ -31,6 +31,7 @@
#include <linux/cpufreq.h>
#include <linux/cpumask.h>
#include <linux/cpu_cooling.h>
+#include <linux/of.h>
#include "ti-thermal.h"
#include "ti-bandgap.h"
@@ -44,6 +45,7 @@ struct ti_thermal_data {
enum thermal_device_mode mode;
struct work_struct thermal_wq;
int sensor_id;
+ bool our_zone;
};
static void ti_thermal_work(struct work_struct *work)
@@ -75,11 +77,10 @@ static inline int ti_thermal_hotspot_temperature(int t, int s, int c)
/* thermal zone ops */
/* Get temperature callback function for thermal zone*/
-static inline int ti_thermal_get_temp(struct thermal_zone_device *thermal,
- unsigned long *temp)
+static inline int __ti_thermal_get_temp(void *devdata, long *temp)
{
struct thermal_zone_device *pcb_tz = NULL;
- struct ti_thermal_data *data = thermal->devdata;
+ struct ti_thermal_data *data = devdata;
struct ti_bandgap *bgp;
const struct ti_temp_sensor *s;
int ret, tmp, slope, constant;
@@ -118,6 +119,14 @@ static inline int ti_thermal_get_temp(struct thermal_zone_device *thermal,
return ret;
}
+static inline int ti_thermal_get_temp(struct thermal_zone_device *thermal,
+ unsigned long *temp)
+{
+ struct ti_thermal_data *data = thermal->devdata;
+
+ return __ti_thermal_get_temp(data, temp);
+}
+
/* Bind callback functions for thermal zone */
static int ti_thermal_bind(struct thermal_zone_device *thermal,
struct thermal_cooling_device *cdev)
@@ -230,11 +239,9 @@ static int ti_thermal_get_trip_temp(struct thermal_zone_device *thermal,
return 0;
}
-/* Get the temperature trend callback functions for thermal zone */
-static int ti_thermal_get_trend(struct thermal_zone_device *thermal,
- int trip, enum thermal_trend *trend)
+static int __ti_thermal_get_trend(void *p, long *trend)
{
- struct ti_thermal_data *data = thermal->devdata;
+ struct ti_thermal_data *data = p;
struct ti_bandgap *bgp;
int id, tr, ret = 0;
@@ -245,6 +252,22 @@ static int ti_thermal_get_trend(struct thermal_zone_device *thermal,
if (ret)
return ret;
+ *trend = tr;
+
+ return 0;
+}
+
+/* Get the temperature trend callback functions for thermal zone */
+static int ti_thermal_get_trend(struct thermal_zone_device *thermal,
+ int trip, enum thermal_trend *trend)
+{
+ int ret;
+ long tr;
+
+ ret = __ti_thermal_get_trend(thermal->devdata, &tr);
+ if (ret)
+ return ret;
+
if (tr > 0)
*trend = THERMAL_TREND_RAISING;
else if (tr < 0)
@@ -308,16 +331,23 @@ int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id,
if (!data)
return -EINVAL;
- /* Create thermal zone */
- data->ti_thermal = thermal_zone_device_register(domain,
+ /* in case this is specified by DT */
+ data->ti_thermal = thermal_zone_of_sensor_register(bgp->dev, id,
+ data, __ti_thermal_get_temp,
+ __ti_thermal_get_trend);
+ if (IS_ERR(data->ti_thermal)) {
+ /* Create thermal zone */
+ data->ti_thermal = thermal_zone_device_register(domain,
OMAP_TRIP_NUMBER, 0, data, &ti_thermal_ops,
NULL, FAST_TEMP_MONITORING_RATE,
FAST_TEMP_MONITORING_RATE);
- if (IS_ERR(data->ti_thermal)) {
- dev_err(bgp->dev, "thermal zone device is NULL\n");
- return PTR_ERR(data->ti_thermal);
+ if (IS_ERR(data->ti_thermal)) {
+ dev_err(bgp->dev, "thermal zone device is NULL\n");
+ return PTR_ERR(data->ti_thermal);
+ }
+ data->ti_thermal->polling_delay = FAST_TEMP_MONITORING_RATE;
+ data->our_zone = true;
}
- data->ti_thermal->polling_delay = FAST_TEMP_MONITORING_RATE;
ti_bandgap_set_sensor_data(bgp, id, data);
ti_bandgap_write_update_interval(bgp, data->sensor_id,
data->ti_thermal->polling_delay);
@@ -331,7 +361,13 @@ int ti_thermal_remove_sensor(struct ti_bandgap *bgp, int id)
data = ti_bandgap_get_sensor_data(bgp, id);
- thermal_zone_device_unregister(data->ti_thermal);
+ if (data && data->ti_thermal) {
+ if (data->our_zone)
+ thermal_zone_device_unregister(data->ti_thermal);
+ else
+ thermal_zone_of_sensor_unregister(bgp->dev,
+ data->ti_thermal);
+ }
return 0;
}
@@ -350,6 +386,15 @@ int ti_thermal_report_sensor_temperature(struct ti_bandgap *bgp, int id)
int ti_thermal_register_cpu_cooling(struct ti_bandgap *bgp, int id)
{
struct ti_thermal_data *data;
+ struct device_node *np = bgp->dev->of_node;
+
+ /*
+ * We are assuming here that if one deploys the zone
+ * using DT, then it must be aware that the cooling device
+ * loading has to happen via cpufreq driver.
+ */
+ if (of_find_property(np, "#thermal-sensor-cells", NULL))
+ return 0;
data = ti_bandgap_get_sensor_data(bgp, id);
if (!data || IS_ERR(data))
@@ -380,7 +425,9 @@ int ti_thermal_unregister_cpu_cooling(struct ti_bandgap *bgp, int id)
struct ti_thermal_data *data;
data = ti_bandgap_get_sensor_data(bgp, id);
- cpufreq_cooling_unregister(data->cool_dev);
+
+ if (data && data->cool_dev)
+ cpufreq_cooling_unregister(data->cool_dev);
return 0;
}
diff --git a/drivers/thermal/x86_pkg_temp_thermal.c b/drivers/thermal/x86_pkg_temp_thermal.c
index 7722cb9d5a80..972e1c73722a 100644
--- a/drivers/thermal/x86_pkg_temp_thermal.c
+++ b/drivers/thermal/x86_pkg_temp_thermal.c
@@ -215,7 +215,7 @@ static int sys_get_trip_temp(struct thermal_zone_device *tzd,
return 0;
}
-int sys_set_trip_temp(struct thermal_zone_device *tzd, int trip,
+static int sys_set_trip_temp(struct thermal_zone_device *tzd, int trip,
unsigned long temp)
{
u32 l, h;