summaryrefslogtreecommitdiff
path: root/drivers/tty
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/amiserial.c15
-rw-r--r--drivers/tty/cyclades.c15
-rw-r--r--drivers/tty/ipwireless/network.c2
-rw-r--r--drivers/tty/n_gsm.c2
-rw-r--r--drivers/tty/nozomi.c104
-rw-r--r--drivers/tty/pty.c3
-rw-r--r--drivers/tty/serial/8250/8250_aspeed_vuart.c125
-rw-r--r--drivers/tty/serial/8250/8250_dw.c35
-rw-r--r--drivers/tty/serial/8250/8250_early.c2
-rw-r--r--drivers/tty/serial/8250/8250_of.c63
-rw-r--r--drivers/tty/serial/8250/8250_omap.c27
-rw-r--r--drivers/tty/serial/8250/8250_port.c6
-rw-r--r--drivers/tty/serial/Kconfig8
-rw-r--r--drivers/tty/serial/amba-pl011.c16
-rw-r--r--drivers/tty/serial/atmel_serial.c5
-rw-r--r--drivers/tty/serial/earlycon.c5
-rw-r--r--drivers/tty/serial/imx.c43
-rw-r--r--drivers/tty/serial/msm_serial.c23
-rw-r--r--drivers/tty/serial/mvebu-uart.c64
-rw-r--r--drivers/tty/serial/qcom_geni_serial.c177
-rw-r--r--drivers/tty/serial/samsung.c40
-rw-r--r--drivers/tty/serial/sc16is7xx.c5
-rw-r--r--drivers/tty/serial/serial_core.c19
-rw-r--r--drivers/tty/serial/sh-sci.c85
-rw-r--r--drivers/tty/serial/sh-sci.h4
-rw-r--r--drivers/tty/serial/st-asc.c6
-rw-r--r--drivers/tty/serial/xilinx_uartps.c108
-rw-r--r--drivers/tty/synclink.c15
-rw-r--r--drivers/tty/synclink_gt.c15
-rw-r--r--drivers/tty/synclinkmp.c15
-rw-r--r--drivers/tty/tty_ioctl.c2
-rw-r--r--drivers/tty/tty_ldisc.c15
-rw-r--r--drivers/tty/vt/vt.c16
33 files changed, 691 insertions, 394 deletions
diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index 32d7ce430b02..34dead614149 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -1566,19 +1566,6 @@ static int rs_proc_show(struct seq_file *m, void *v)
return 0;
}
-static int rs_proc_open(struct inode *inode, struct file *file)
-{
- return single_open(file, rs_proc_show, NULL);
-}
-
-static const struct file_operations rs_proc_fops = {
- .owner = THIS_MODULE,
- .open = rs_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
/*
* ---------------------------------------------------------------------
* rs_init() and friends
@@ -1620,7 +1607,7 @@ static const struct tty_operations serial_ops = {
.tiocmget = rs_tiocmget,
.tiocmset = rs_tiocmset,
.get_icount = rs_get_icount,
- .proc_fops = &rs_proc_fops,
+ .proc_show = rs_proc_show,
};
static int amiga_carrier_raised(struct tty_port *port)
diff --git a/drivers/tty/cyclades.c b/drivers/tty/cyclades.c
index cf0bde3bb927..6d3c58051ce3 100644
--- a/drivers/tty/cyclades.c
+++ b/drivers/tty/cyclades.c
@@ -3972,19 +3972,6 @@ static int cyclades_proc_show(struct seq_file *m, void *v)
return 0;
}
-static int cyclades_proc_open(struct inode *inode, struct file *file)
-{
- return single_open(file, cyclades_proc_show, NULL);
-}
-
-static const struct file_operations cyclades_proc_fops = {
- .owner = THIS_MODULE,
- .open = cyclades_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
/* The serial driver boot-time initialization code!
Hardware I/O ports are mapped to character special devices on a
first found, first allocated manner. That is, this code searches
@@ -4024,7 +4011,7 @@ static const struct tty_operations cy_ops = {
.tiocmget = cy_tiocmget,
.tiocmset = cy_tiocmset,
.get_icount = cy_get_icount,
- .proc_fops = &cyclades_proc_fops,
+ .proc_show = cyclades_proc_show,
};
static int __init cy_init(void)
diff --git a/drivers/tty/ipwireless/network.c b/drivers/tty/ipwireless/network.c
index 695439c03147..cf20616340a1 100644
--- a/drivers/tty/ipwireless/network.c
+++ b/drivers/tty/ipwireless/network.c
@@ -416,7 +416,7 @@ void ipwireless_network_packet_received(struct ipw_network *network,
struct ipw_network *ipwireless_network_create(struct ipw_hardware *hw)
{
struct ipw_network *network =
- kzalloc(sizeof(struct ipw_network), GFP_ATOMIC);
+ kzalloc(sizeof(struct ipw_network), GFP_KERNEL);
if (!network)
return NULL;
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 1dbe27c9946c..86b7e20ffd7f 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -2675,7 +2675,7 @@ static inline void muxnet_put(struct gsm_mux_net *mux_net)
kref_put(&mux_net->ref, net_free);
}
-static int gsm_mux_net_start_xmit(struct sk_buff *skb,
+static netdev_tx_t gsm_mux_net_start_xmit(struct sk_buff *skb,
struct net_device *net)
{
struct gsm_mux_net *mux_net = netdev_priv(net);
diff --git a/drivers/tty/nozomi.c b/drivers/tty/nozomi.c
index b57b35066ebe..fed820e9ab9d 100644
--- a/drivers/tty/nozomi.c
+++ b/drivers/tty/nozomi.c
@@ -72,19 +72,19 @@ do { \
#define TMP_BUF_MAX 256
-#define DUMP(buf__,len__) \
- do { \
- char tbuf[TMP_BUF_MAX] = {0};\
- if (len__ > 1) {\
- snprintf(tbuf, len__ > TMP_BUF_MAX ? TMP_BUF_MAX : len__, "%s", buf__);\
- if (tbuf[len__-2] == '\r') {\
- tbuf[len__-2] = 'r';\
- } \
- DBG1("SENDING: '%s' (%d+n)", tbuf, len__);\
- } else {\
- DBG1("SENDING: '%s' (%d)", tbuf, len__);\
- } \
-} while (0)
+#define DUMP(buf__, len__) \
+ do { \
+ char tbuf[TMP_BUF_MAX] = {0}; \
+ if (len__ > 1) { \
+ u32 data_len = min_t(u32, len__, TMP_BUF_MAX); \
+ strscpy(tbuf, buf__, data_len); \
+ if (tbuf[data_len - 2] == '\r') \
+ tbuf[data_len - 2] = 'r'; \
+ DBG1("SENDING: '%s' (%d+n)", tbuf, len__); \
+ } else { \
+ DBG1("SENDING: '%s' (%d)", tbuf, len__); \
+ } \
+ } while (0)
/* Defines */
#define NOZOMI_NAME "nozomi"
@@ -102,41 +102,41 @@ do { \
#define RECEIVE_BUF_MAX 4
-#define R_IIR 0x0000 /* Interrupt Identity Register */
-#define R_FCR 0x0000 /* Flow Control Register */
-#define R_IER 0x0004 /* Interrupt Enable Register */
+#define R_IIR 0x0000 /* Interrupt Identity Register */
+#define R_FCR 0x0000 /* Flow Control Register */
+#define R_IER 0x0004 /* Interrupt Enable Register */
#define NOZOMI_CONFIG_MAGIC 0xEFEFFEFE
#define TOGGLE_VALID 0x0000
/* Definition of interrupt tokens */
-#define MDM_DL1 0x0001
-#define MDM_UL1 0x0002
-#define MDM_DL2 0x0004
-#define MDM_UL2 0x0008
-#define DIAG_DL1 0x0010
-#define DIAG_DL2 0x0020
-#define DIAG_UL 0x0040
-#define APP1_DL 0x0080
-#define APP1_UL 0x0100
-#define APP2_DL 0x0200
-#define APP2_UL 0x0400
-#define CTRL_DL 0x0800
-#define CTRL_UL 0x1000
-#define RESET 0x8000
-
-#define MDM_DL (MDM_DL1 | MDM_DL2)
-#define MDM_UL (MDM_UL1 | MDM_UL2)
-#define DIAG_DL (DIAG_DL1 | DIAG_DL2)
+#define MDM_DL1 0x0001
+#define MDM_UL1 0x0002
+#define MDM_DL2 0x0004
+#define MDM_UL2 0x0008
+#define DIAG_DL1 0x0010
+#define DIAG_DL2 0x0020
+#define DIAG_UL 0x0040
+#define APP1_DL 0x0080
+#define APP1_UL 0x0100
+#define APP2_DL 0x0200
+#define APP2_UL 0x0400
+#define CTRL_DL 0x0800
+#define CTRL_UL 0x1000
+#define RESET 0x8000
+
+#define MDM_DL (MDM_DL1 | MDM_DL2)
+#define MDM_UL (MDM_UL1 | MDM_UL2)
+#define DIAG_DL (DIAG_DL1 | DIAG_DL2)
/* modem signal definition */
-#define CTRL_DSR 0x0001
-#define CTRL_DCD 0x0002
-#define CTRL_RI 0x0004
-#define CTRL_CTS 0x0008
+#define CTRL_DSR 0x0001
+#define CTRL_DCD 0x0002
+#define CTRL_RI 0x0004
+#define CTRL_CTS 0x0008
-#define CTRL_DTR 0x0001
-#define CTRL_RTS 0x0002
+#define CTRL_DTR 0x0001
+#define CTRL_RTS 0x0002
#define MAX_PORT 4
#define NOZOMI_MAX_PORTS 5
@@ -155,7 +155,7 @@ enum card_type {
/* Initialization states a card can be in */
enum card_state {
- NOZOMI_STATE_UKNOWN = 0,
+ NOZOMI_STATE_UNKNOWN = 0,
NOZOMI_STATE_ENABLED = 1, /* pci device enabled */
NOZOMI_STATE_ALLOCATED = 2, /* config setup done */
NOZOMI_STATE_READY = 3, /* flowcontrols received */
@@ -365,7 +365,7 @@ struct buffer {
u8 *data;
} __attribute__ ((packed));
-/* Global variables */
+/* Global variables */
static const struct pci_device_id nozomi_pci_tbl[] = {
{PCI_DEVICE(0x1931, 0x000c)}, /* Nozomi HSDPA */
{},
@@ -1686,12 +1686,12 @@ static int ntty_tiocmget(struct tty_struct *tty)
/* Note: these could change under us but it is not clear this
matters if so */
- return (ctrl_ul->RTS ? TIOCM_RTS : 0) |
- (ctrl_ul->DTR ? TIOCM_DTR : 0) |
- (ctrl_dl->DCD ? TIOCM_CAR : 0) |
- (ctrl_dl->RI ? TIOCM_RNG : 0) |
- (ctrl_dl->DSR ? TIOCM_DSR : 0) |
- (ctrl_dl->CTS ? TIOCM_CTS : 0);
+ return (ctrl_ul->RTS ? TIOCM_RTS : 0)
+ | (ctrl_ul->DTR ? TIOCM_DTR : 0)
+ | (ctrl_dl->DCD ? TIOCM_CAR : 0)
+ | (ctrl_dl->RI ? TIOCM_RNG : 0)
+ | (ctrl_dl->DSR ? TIOCM_DSR : 0)
+ | (ctrl_dl->CTS ? TIOCM_CTS : 0);
}
/* Sets io controls parameters */
@@ -1722,10 +1722,10 @@ static int ntty_cflags_changed(struct port *port, unsigned long flags,
const struct async_icount cnow = port->tty_icount;
int ret;
- ret = ((flags & TIOCM_RNG) && (cnow.rng != cprev->rng)) ||
- ((flags & TIOCM_DSR) && (cnow.dsr != cprev->dsr)) ||
- ((flags & TIOCM_CD) && (cnow.dcd != cprev->dcd)) ||
- ((flags & TIOCM_CTS) && (cnow.cts != cprev->cts));
+ ret = ((flags & TIOCM_RNG) && (cnow.rng != cprev->rng))
+ || ((flags & TIOCM_DSR) && (cnow.dsr != cprev->dsr))
+ || ((flags & TIOCM_CD) && (cnow.dcd != cprev->dcd))
+ || ((flags & TIOCM_CTS) && (cnow.cts != cprev->cts));
*cprev = cnow;
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index 6c7151edd715..b0e2c4847a5d 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -110,16 +110,19 @@ static void pty_unthrottle(struct tty_struct *tty)
static int pty_write(struct tty_struct *tty, const unsigned char *buf, int c)
{
struct tty_struct *to = tty->link;
+ unsigned long flags;
if (tty->stopped)
return 0;
if (c > 0) {
+ spin_lock_irqsave(&to->port->lock, flags);
/* Stuff the data into the input queue of the other end */
c = tty_insert_flip_string(to->port, buf, c);
/* And shovel */
if (c)
tty_flip_buffer_push(to->port);
+ spin_unlock_irqrestore(&to->port->lock, flags);
}
return c;
}
diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c
index 74a408d9db24..435bec40dee6 100644
--- a/drivers/tty/serial/8250/8250_aspeed_vuart.c
+++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c
@@ -10,6 +10,8 @@
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
#include <linux/clk.h>
#include "8250.h"
@@ -28,9 +30,18 @@ struct aspeed_vuart {
void __iomem *regs;
struct clk *clk;
int line;
+ struct timer_list unthrottle_timer;
+ struct uart_8250_port *port;
};
/*
+ * If we fill the tty flip buffers, we throttle the data ready interrupt
+ * to prevent dropped characters. This timeout defines how long we wait
+ * to (conditionally, depending on buffer state) unthrottle.
+ */
+static const int unthrottle_timeout = HZ/10;
+
+/*
* The VUART is basically two UART 'front ends' connected by their FIFO
* (no actual serial line in between). One is on the BMC side (management
* controller) and one is on the host CPU side.
@@ -179,6 +190,114 @@ static void aspeed_vuart_shutdown(struct uart_port *uart_port)
serial8250_do_shutdown(uart_port);
}
+static void __aspeed_vuart_set_throttle(struct uart_8250_port *up,
+ bool throttle)
+{
+ unsigned char irqs = UART_IER_RLSI | UART_IER_RDI;
+
+ up->ier &= ~irqs;
+ if (!throttle)
+ up->ier |= irqs;
+ serial_out(up, UART_IER, up->ier);
+}
+static void aspeed_vuart_set_throttle(struct uart_port *port, bool throttle)
+{
+ struct uart_8250_port *up = up_to_u8250p(port);
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ __aspeed_vuart_set_throttle(up, throttle);
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void aspeed_vuart_throttle(struct uart_port *port)
+{
+ aspeed_vuart_set_throttle(port, true);
+}
+
+static void aspeed_vuart_unthrottle(struct uart_port *port)
+{
+ aspeed_vuart_set_throttle(port, false);
+}
+
+static void aspeed_vuart_unthrottle_exp(struct timer_list *timer)
+{
+ struct aspeed_vuart *vuart = from_timer(vuart, timer, unthrottle_timer);
+ struct uart_8250_port *up = vuart->port;
+
+ if (!tty_buffer_space_avail(&up->port.state->port)) {
+ mod_timer(&vuart->unthrottle_timer,
+ jiffies + unthrottle_timeout);
+ return;
+ }
+
+ aspeed_vuart_unthrottle(&up->port);
+}
+
+/*
+ * Custom interrupt handler to manage finer-grained flow control. Although we
+ * have throttle/unthrottle callbacks, we've seen that the VUART device can
+ * deliver characters faster than the ldisc has a chance to check buffer space
+ * against the throttle threshold. This results in dropped characters before
+ * the throttle.
+ *
+ * We do this by checking for flip buffer space before RX. If we have no space,
+ * throttle now and schedule an unthrottle for later, once the ldisc has had
+ * a chance to drain the buffers.
+ */
+static int aspeed_vuart_handle_irq(struct uart_port *port)
+{
+ struct uart_8250_port *up = up_to_u8250p(port);
+ unsigned int iir, lsr;
+ unsigned long flags;
+ int space, count;
+
+ iir = serial_port_in(port, UART_IIR);
+
+ if (iir & UART_IIR_NO_INT)
+ return 0;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ lsr = serial_port_in(port, UART_LSR);
+
+ if (lsr & (UART_LSR_DR | UART_LSR_BI)) {
+ space = tty_buffer_space_avail(&port->state->port);
+
+ if (!space) {
+ /* throttle and schedule an unthrottle later */
+ struct aspeed_vuart *vuart = port->private_data;
+ __aspeed_vuart_set_throttle(up, true);
+
+ if (!timer_pending(&vuart->unthrottle_timer)) {
+ vuart->port = up;
+ mod_timer(&vuart->unthrottle_timer,
+ jiffies + unthrottle_timeout);
+ }
+
+ } else {
+ count = min(space, 256);
+
+ do {
+ serial8250_read_char(up, lsr);
+ lsr = serial_in(up, UART_LSR);
+ if (--count == 0)
+ break;
+ } while (lsr & (UART_LSR_DR | UART_LSR_BI));
+
+ tty_flip_buffer_push(&port->state->port);
+ }
+ }
+
+ serial8250_modem_status(up);
+ if (lsr & UART_LSR_THRE)
+ serial8250_tx_chars(up);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ return 1;
+}
+
static int aspeed_vuart_probe(struct platform_device *pdev)
{
struct uart_8250_port port;
@@ -195,6 +314,7 @@ static int aspeed_vuart_probe(struct platform_device *pdev)
return -ENOMEM;
vuart->dev = &pdev->dev;
+ timer_setup(&vuart->unthrottle_timer, aspeed_vuart_unthrottle_exp, 0);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
vuart->regs = devm_ioremap_resource(&pdev->dev, res);
@@ -208,6 +328,9 @@ static int aspeed_vuart_probe(struct platform_device *pdev)
port.port.mapsize = resource_size(res);
port.port.startup = aspeed_vuart_startup;
port.port.shutdown = aspeed_vuart_shutdown;
+ port.port.throttle = aspeed_vuart_throttle;
+ port.port.unthrottle = aspeed_vuart_unthrottle;
+ port.port.status = UPSTAT_SYNC_FIFO;
port.port.dev = &pdev->dev;
rc = sysfs_create_group(&vuart->dev->kobj, &aspeed_vuart_attr_group);
@@ -253,6 +376,7 @@ static int aspeed_vuart_probe(struct platform_device *pdev)
port.port.irq = irq_of_parse_and_map(np, 0);
port.port.irqflags = IRQF_SHARED;
+ port.port.handle_irq = aspeed_vuart_handle_irq;
port.port.iotype = UPIO_MEM;
port.port.type = PORT_16550A;
port.port.uartclk = clk;
@@ -292,6 +416,7 @@ static int aspeed_vuart_remove(struct platform_device *pdev)
{
struct aspeed_vuart *vuart = platform_get_drvdata(pdev);
+ del_timer_sync(&vuart->unthrottle_timer);
aspeed_vuart_set_enabled(vuart, false);
serial8250_unregister_port(vuart->line);
sysfs_remove_group(&vuart->dev->kobj, &aspeed_vuart_attr_group);
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index 6fcdb90f616a..aff04f1de3a5 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -121,25 +121,44 @@ static void dw8250_check_lcr(struct uart_port *p, int value)
}
/* Returns once the transmitter is empty or we run out of retries */
-static void dw8250_tx_wait_empty(struct uart_port *p, int tries)
+static void dw8250_tx_wait_empty(struct uart_port *p)
{
+ unsigned int tries = 20000;
+ unsigned int delay_threshold = tries - 1000;
unsigned int lsr;
while (tries--) {
lsr = readb (p->membase + (UART_LSR << p->regshift));
if (lsr & UART_LSR_TEMT)
break;
- udelay (10);
+
+ /* The device is first given a chance to empty without delay,
+ * to avoid slowdowns at high bitrates. If after 1000 tries
+ * the buffer has still not emptied, allow more time for low-
+ * speed links. */
+ if (tries < delay_threshold)
+ udelay (1);
}
}
-static void dw8250_serial_out(struct uart_port *p, int offset, int value)
+static void dw8250_serial_out38x(struct uart_port *p, int offset, int value)
{
struct dw8250_data *d = p->private_data;
/* Allow the TX to drain before we reconfigure */
if (offset == UART_LCR)
- dw8250_tx_wait_empty(p, 1000);
+ dw8250_tx_wait_empty(p);
+
+ writeb(value, p->membase + (offset << p->regshift));
+
+ if (offset == UART_LCR && !d->uart_16550_compatible)
+ dw8250_check_lcr(p, value);
+}
+
+
+static void dw8250_serial_out(struct uart_port *p, int offset, int value)
+{
+ struct dw8250_data *d = p->private_data;
writeb(value, p->membase + (offset << p->regshift));
@@ -357,6 +376,9 @@ static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
p->serial_in = dw8250_serial_in32be;
p->serial_out = dw8250_serial_out32be;
}
+ if (of_device_is_compatible(np, "marvell,armada-38x-uart"))
+ p->serial_out = dw8250_serial_out38x;
+
} else if (acpi_dev_present("APMC0D08", NULL, -1)) {
p->iotype = UPIO_MEM32;
p->regshift = 2;
@@ -554,6 +576,10 @@ static int dw8250_probe(struct platform_device *pdev)
if (!data->skip_autocfg)
dw8250_setup_port(p);
+#ifdef CONFIG_PM
+ uart.capabilities |= UART_CAP_RPM;
+#endif
+
/* If we have a valid fifosize, try hooking up DMA */
if (p->fifosize) {
data->dma.rxconf.src_maxburst = p->fifosize / 4;
@@ -666,6 +692,7 @@ static const struct dev_pm_ops dw8250_pm_ops = {
static const struct of_device_id dw8250_of_match[] = {
{ .compatible = "snps,dw-apb-uart" },
{ .compatible = "cavium,octeon-3860-uart" },
+ { .compatible = "marvell,armada-38x-uart" },
{ /* Sentinel */ }
};
MODULE_DEVICE_TABLE(of, dw8250_of_match);
diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c
index ae6a256524d8..5cd8c36c8fcc 100644
--- a/drivers/tty/serial/8250/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
@@ -122,7 +122,7 @@ static void __init init_port(struct earlycon_device *device)
serial8250_early_out(port, UART_FCR, 0); /* no fifo */
serial8250_early_out(port, UART_MCR, 0x3); /* DTR + RTS */
- if (port->uartclk && device->baud) {
+ if (port->uartclk) {
divisor = DIV_ROUND_CLOSEST(port->uartclk, 16 * device->baud);
c = serial8250_early_in(port, UART_LCR);
serial8250_early_out(port, UART_LCR, c | UART_LCR_DLAB);
diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c
index 9835b1c1cbe1..bfb37f0be22f 100644
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -92,13 +92,43 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
goto err_unprepare;
}
+ port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_FIXED_PORT |
+ UPF_FIXED_TYPE;
spin_lock_init(&port->lock);
- port->mapbase = resource.start;
- port->mapsize = resource_size(&resource);
- /* Check for shifted address mapping */
- if (of_property_read_u32(np, "reg-offset", &prop) == 0)
- port->mapbase += prop;
+ if (resource_type(&resource) == IORESOURCE_IO) {
+ port->iotype = UPIO_PORT;
+ port->iobase = resource.start;
+ } else {
+ port->mapbase = resource.start;
+ port->mapsize = resource_size(&resource);
+
+ /* Check for shifted address mapping */
+ if (of_property_read_u32(np, "reg-offset", &prop) == 0)
+ port->mapbase += prop;
+
+ port->iotype = UPIO_MEM;
+ if (of_property_read_u32(np, "reg-io-width", &prop) == 0) {
+ switch (prop) {
+ case 1:
+ port->iotype = UPIO_MEM;
+ break;
+ case 2:
+ port->iotype = UPIO_MEM16;
+ break;
+ case 4:
+ port->iotype = of_device_is_big_endian(np) ?
+ UPIO_MEM32BE : UPIO_MEM32;
+ break;
+ default:
+ dev_warn(&ofdev->dev, "unsupported reg-io-width (%d)\n",
+ prop);
+ ret = -EINVAL;
+ goto err_dispose;
+ }
+ }
+ port->flags |= UPF_IOREMAP;
+ }
/* Check for registers offset within the devices address range */
if (of_property_read_u32(np, "reg-shift", &prop) == 0)
@@ -114,26 +144,6 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
port->line = ret;
port->irq = irq_of_parse_and_map(np, 0);
- port->iotype = UPIO_MEM;
- if (of_property_read_u32(np, "reg-io-width", &prop) == 0) {
- switch (prop) {
- case 1:
- port->iotype = UPIO_MEM;
- break;
- case 2:
- port->iotype = UPIO_MEM16;
- break;
- case 4:
- port->iotype = of_device_is_big_endian(np) ?
- UPIO_MEM32BE : UPIO_MEM32;
- break;
- default:
- dev_warn(&ofdev->dev, "unsupported reg-io-width (%d)\n",
- prop);
- ret = -EINVAL;
- goto err_dispose;
- }
- }
info->rst = devm_reset_control_get_optional_shared(&ofdev->dev, NULL);
if (IS_ERR(info->rst)) {
@@ -147,8 +157,7 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
port->type = type;
port->uartclk = clk;
- port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP
- | UPF_FIXED_PORT | UPF_FIXED_TYPE;
+ port->irqflags |= IRQF_SHARED;
if (of_property_read_bool(np, "no-loopback-test"))
port->flags |= UPF_SKIP_TEST;
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index 624b501fd253..1b337fee07ed 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -1110,13 +1110,14 @@ static int omap8250_no_handle_irq(struct uart_port *port)
return 0;
}
+static const u8 omap4_habit = UART_ERRATA_CLOCK_DISABLE;
static const u8 am3352_habit = OMAP_DMA_TX_KICK | UART_ERRATA_CLOCK_DISABLE;
static const u8 dra742_habit = UART_ERRATA_CLOCK_DISABLE;
static const struct of_device_id omap8250_dt_ids[] = {
{ .compatible = "ti,omap2-uart" },
{ .compatible = "ti,omap3-uart" },
- { .compatible = "ti,omap4-uart" },
+ { .compatible = "ti,omap4-uart", .data = &omap4_habit, },
{ .compatible = "ti,am3352-uart", .data = &am3352_habit, },
{ .compatible = "ti,am4372-uart", .data = &am3352_habit, },
{ .compatible = "ti,dra742-uart", .data = &dra742_habit, },
@@ -1310,8 +1311,17 @@ static void omap8250_complete(struct device *dev)
static int omap8250_suspend(struct device *dev)
{
struct omap8250_priv *priv = dev_get_drvdata(dev);
+ struct uart_8250_port *up = serial8250_get_port(priv->line);
serial8250_suspend_port(priv->line);
+
+ pm_runtime_get_sync(dev);
+ if (!device_may_wakeup(dev))
+ priv->wer = 0;
+ serial_out(up, UART_OMAP_WER, priv->wer);
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
+
flush_work(&priv->qos_work);
return 0;
}
@@ -1353,6 +1363,19 @@ static int omap8250_soft_reset(struct device *dev)
int sysc;
int syss;
+ /*
+ * At least on omap4, unused uarts may not idle after reset without
+ * a basic scr dma configuration even with no dma in use. The
+ * module clkctrl status bits will be 1 instead of 3 blocking idle
+ * for the whole clockdomain. The softreset below will clear scr,
+ * and we restore it on resume so this is safe to do on all SoCs
+ * needing omap8250_soft_reset() quirk. Do it in two writes as
+ * recommended in the comment for omap8250_update_scr().
+ */
+ serial_out(up, UART_OMAP_SCR, OMAP_UART_SCR_DMAMODE_1);
+ serial_out(up, UART_OMAP_SCR,
+ OMAP_UART_SCR_DMAMODE_1 | OMAP_UART_SCR_DMAMODE_CTL);
+
sysc = serial_in(up, UART_OMAP_SYSC);
/* softreset the UART */
@@ -1403,6 +1426,8 @@ static int omap8250_runtime_suspend(struct device *dev)
/* Restore to UART mode after reset (for wakeup) */
omap8250_update_mdr1(up, priv);
+ /* Restore wakeup enable register */
+ serial_out(up, UART_OMAP_WER, priv->wer);
}
if (up->dma && up->dma->rxchan)
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 95833cbc4338..cf541aab2bd0 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -243,6 +243,7 @@ static const struct serial8250_config uart_config[] = {
.fifo_size = 32,
.tx_loadsz = 32,
.fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .rxtrig_bytes = {1, 8, 16, 30},
.flags = UART_CAP_FIFO | UART_CAP_AFE,
},
[PORT_ALTR_16550_F64] = {
@@ -250,6 +251,7 @@ static const struct serial8250_config uart_config[] = {
.fifo_size = 64,
.tx_loadsz = 64,
.fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .rxtrig_bytes = {1, 16, 32, 62},
.flags = UART_CAP_FIFO | UART_CAP_AFE,
},
[PORT_ALTR_16550_F128] = {
@@ -257,6 +259,7 @@ static const struct serial8250_config uart_config[] = {
.fifo_size = 128,
.tx_loadsz = 128,
.fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .rxtrig_bytes = {1, 32, 64, 126},
.flags = UART_CAP_FIFO | UART_CAP_AFE,
},
/*
@@ -1680,7 +1683,7 @@ static void serial8250_enable_ms(struct uart_port *port)
serial8250_rpm_put(up);
}
-static void serial8250_read_char(struct uart_8250_port *up, unsigned char lsr)
+void serial8250_read_char(struct uart_8250_port *up, unsigned char lsr)
{
struct uart_port *port = &up->port;
unsigned char ch;
@@ -1740,6 +1743,7 @@ static void serial8250_read_char(struct uart_8250_port *up, unsigned char lsr)
uart_insert_char(port, lsr, UART_LSR_OE, ch, flag);
}
+EXPORT_SYMBOL_GPL(serial8250_read_char);
/*
* serial8250_rx_chars: processes according to the passed in LSR
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 0f058df0b070..df8bd0c7b97d 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -115,7 +115,6 @@ config SERIAL_SB1250_DUART_CONSOLE
config SERIAL_ATMEL
bool "AT91 on-chip serial port support"
- depends on HAS_DMA
depends on ARCH_AT91 || COMPILE_TEST
select SERIAL_CORE
select SERIAL_MCTRL_GPIO if GPIOLIB
@@ -500,7 +499,6 @@ config SERIAL_SA1100_CONSOLE
config SERIAL_IMX
tristate "IMX serial port support"
- depends on HAS_DMA
depends on ARCH_MXC || COMPILE_TEST
select SERIAL_CORE
select RATIONAL
@@ -676,6 +674,8 @@ config SERIAL_SH_SCI
config SERIAL_SH_SCI_NR_UARTS
int "Maximum number of SCI(F) serial ports" if EXPERT
+ range 1 64 if 64BIT
+ range 1 32 if !64BIT
depends on SERIAL_SH_SCI
default "3" if H8300
default "10" if SUPERH
@@ -1262,7 +1262,6 @@ config SERIAL_PCH_UART_CONSOLE
config SERIAL_MXS_AUART
tristate "MXS AUART support"
- depends on HAS_DMA
depends on ARCH_MXS || MACH_ASM9260 || COMPILE_TEST
select SERIAL_CORE
select SERIAL_MCTRL_GPIO if GPIOLIB
@@ -1295,7 +1294,7 @@ config SERIAL_XILINX_PS_UART_CONSOLE
config SERIAL_AR933X
tristate "AR933X serial port support"
- depends on HAVE_CLK && SOC_AR933X
+ depends on HAVE_CLK && ATH79
select SERIAL_CORE
help
If you have an Atheros AR933X SOC based board and want to use the
@@ -1473,7 +1472,6 @@ config SERIAL_SPRD_CONSOLE
config SERIAL_STM32
tristate "STMicroelectronics STM32 serial port support"
select SERIAL_CORE
- depends on HAS_DMA
depends on ARCH_STM32 || COMPILE_TEST
help
This driver is for the on-chip Serial Controller on
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 4b40a5b449ee..ebd33c0232e6 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1727,10 +1727,26 @@ static int pl011_allocate_irq(struct uart_amba_port *uap)
*/
static void pl011_enable_interrupts(struct uart_amba_port *uap)
{
+ unsigned int i;
+
spin_lock_irq(&uap->port.lock);
/* Clear out any spuriously appearing RX interrupts */
pl011_write(UART011_RTIS | UART011_RXIS, uap, REG_ICR);
+
+ /*
+ * RXIS is asserted only when the RX FIFO transitions from below
+ * to above the trigger threshold. If the RX FIFO is already
+ * full to the threshold this can't happen and RXIS will now be
+ * stuck off. Drain the RX FIFO explicitly to fix this:
+ */
+ for (i = 0; i < uap->fifosize * 2; ++i) {
+ if (pl011_read(uap, REG_FR) & UART01x_FR_RXFE)
+ break;
+
+ pl011_read(uap, REG_DR);
+ }
+
uap->im = UART011_RTIM;
if (!pl011_dma_rx_running(uap))
uap->im |= UART011_RXIM;
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index e287fe8f10fc..55b3eff148b1 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1757,7 +1757,6 @@ static int atmel_startup(struct uart_port *port)
{
struct platform_device *pdev = to_platform_device(port->dev);
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
- struct tty_struct *tty = port->state->port.tty;
int retval;
/*
@@ -1772,8 +1771,8 @@ static int atmel_startup(struct uart_port *port)
* Allocate the IRQ
*/
retval = request_irq(port->irq, atmel_interrupt,
- IRQF_SHARED | IRQF_COND_SUSPEND,
- tty ? tty->name : "atmel_serial", port);
+ IRQF_SHARED | IRQF_COND_SUSPEND,
+ dev_name(&pdev->dev), port);
if (retval) {
dev_err(port->dev, "atmel_startup - Can't get irq\n");
return retval;
diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c
index 22683393a0f2..c14873b67803 100644
--- a/drivers/tty/serial/earlycon.c
+++ b/drivers/tty/serial/earlycon.c
@@ -246,7 +246,6 @@ int __init of_setup_earlycon(const struct earlycon_id *match,
return -ENXIO;
}
port->mapbase = addr;
- port->uartclk = BASE_BAUD * 16;
val = of_get_flat_dt_prop(node, "reg-offset", NULL);
if (val)
@@ -281,6 +280,10 @@ int __init of_setup_earlycon(const struct earlycon_id *match,
if (val)
early_console_dev.baud = be32_to_cpu(*val);
+ val = of_get_flat_dt_prop(node, "clock-frequency", NULL);
+ if (val)
+ port->uartclk = be32_to_cpu(*val);
+
if (options) {
early_console_dev.baud = simple_strtoul(options, NULL, 0);
strlcpy(early_console_dev.options, options,
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index c2fc6bef7a6f..4e853570ea80 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -1291,18 +1291,13 @@ static void imx_uart_enable_dma(struct imx_port *sport)
static void imx_uart_disable_dma(struct imx_port *sport)
{
- u32 ucr1, ucr2;
+ u32 ucr1;
/* clear UCR1 */
ucr1 = imx_uart_readl(sport, UCR1);
ucr1 &= ~(UCR1_RXDMAEN | UCR1_TXDMAEN | UCR1_ATDMAEN);
imx_uart_writel(sport, ucr1, UCR1);
- /* clear UCR2 */
- ucr2 = imx_uart_readl(sport, UCR2);
- ucr2 &= ~(UCR2_CTSC | UCR2_CTS | UCR2_ATEN);
- imx_uart_writel(sport, ucr2, UCR2);
-
imx_uart_setup_ufcr(sport, TXTL_DEFAULT, RXTL_DEFAULT);
sport->dma_is_enabled = 0;
@@ -1427,13 +1422,21 @@ static void imx_uart_shutdown(struct uart_port *port)
{
struct imx_port *sport = (struct imx_port *)port;
unsigned long flags;
- u32 ucr1, ucr2;
+ u32 ucr1, ucr2, ucr4;
if (sport->dma_is_enabled) {
- sport->dma_is_rxing = 0;
- sport->dma_is_txing = 0;
dmaengine_terminate_sync(sport->dma_chan_tx);
+ if (sport->dma_is_txing) {
+ dma_unmap_sg(sport->port.dev, &sport->tx_sgl[0],
+ sport->dma_tx_nents, DMA_TO_DEVICE);
+ sport->dma_is_txing = 0;
+ }
dmaengine_terminate_sync(sport->dma_chan_rx);
+ if (sport->dma_is_rxing) {
+ dma_unmap_sg(sport->port.dev, &sport->rx_sgl,
+ 1, DMA_FROM_DEVICE);
+ sport->dma_is_rxing = 0;
+ }
spin_lock_irqsave(&sport->port.lock, flags);
imx_uart_stop_tx(port);
@@ -1449,6 +1452,10 @@ static void imx_uart_shutdown(struct uart_port *port)
ucr2 = imx_uart_readl(sport, UCR2);
ucr2 &= ~(UCR2_TXEN | UCR2_ATEN);
imx_uart_writel(sport, ucr2, UCR2);
+
+ ucr4 = imx_uart_readl(sport, UCR4);
+ ucr4 &= ~UCR4_OREN;
+ imx_uart_writel(sport, ucr4, UCR4);
spin_unlock_irqrestore(&sport->port.lock, flags);
/*
@@ -2425,8 +2432,7 @@ static void imx_uart_enable_wakeup(struct imx_port *sport, bool on)
static int imx_uart_suspend_noirq(struct device *dev)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct imx_port *sport = platform_get_drvdata(pdev);
+ struct imx_port *sport = dev_get_drvdata(dev);
imx_uart_save_context(sport);
@@ -2437,8 +2443,7 @@ static int imx_uart_suspend_noirq(struct device *dev)
static int imx_uart_resume_noirq(struct device *dev)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct imx_port *sport = platform_get_drvdata(pdev);
+ struct imx_port *sport = dev_get_drvdata(dev);
int ret;
ret = clk_enable(sport->clk_ipg);
@@ -2452,8 +2457,7 @@ static int imx_uart_resume_noirq(struct device *dev)
static int imx_uart_suspend(struct device *dev)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct imx_port *sport = platform_get_drvdata(pdev);
+ struct imx_port *sport = dev_get_drvdata(dev);
int ret;
uart_suspend_port(&imx_uart_uart_driver, &sport->port);
@@ -2471,8 +2475,7 @@ static int imx_uart_suspend(struct device *dev)
static int imx_uart_resume(struct device *dev)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct imx_port *sport = platform_get_drvdata(pdev);
+ struct imx_port *sport = dev_get_drvdata(dev);
/* disable wakeup from i.MX UART */
imx_uart_enable_wakeup(sport, false);
@@ -2487,8 +2490,7 @@ static int imx_uart_resume(struct device *dev)
static int imx_uart_freeze(struct device *dev)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct imx_port *sport = platform_get_drvdata(pdev);
+ struct imx_port *sport = dev_get_drvdata(dev);
uart_suspend_port(&imx_uart_uart_driver, &sport->port);
@@ -2497,8 +2499,7 @@ static int imx_uart_freeze(struct device *dev)
static int imx_uart_thaw(struct device *dev)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct imx_port *sport = platform_get_drvdata(pdev);
+ struct imx_port *sport = dev_get_drvdata(dev);
uart_resume_port(&imx_uart_uart_driver, &sport->port);
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index ee96cf0d0057..736b74fd6623 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -1812,11 +1812,34 @@ static const struct of_device_id msm_match_table[] = {
};
MODULE_DEVICE_TABLE(of, msm_match_table);
+static int __maybe_unused msm_serial_suspend(struct device *dev)
+{
+ struct msm_port *port = dev_get_drvdata(dev);
+
+ uart_suspend_port(&msm_uart_driver, &port->uart);
+
+ return 0;
+}
+
+static int __maybe_unused msm_serial_resume(struct device *dev)
+{
+ struct msm_port *port = dev_get_drvdata(dev);
+
+ uart_resume_port(&msm_uart_driver, &port->uart);
+
+ return 0;
+}
+
+static const struct dev_pm_ops msm_serial_dev_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(msm_serial_suspend, msm_serial_resume)
+};
+
static struct platform_driver msm_platform_driver = {
.remove = msm_serial_remove,
.probe = msm_serial_probe,
.driver = {
.name = "msm_serial",
+ .pm = &msm_serial_dev_pm_ops,
.of_match_table = msm_match_table,
},
};
diff --git a/drivers/tty/serial/mvebu-uart.c b/drivers/tty/serial/mvebu-uart.c
index f503fab1e268..d04b5eeea3c6 100644
--- a/drivers/tty/serial/mvebu-uart.c
+++ b/drivers/tty/serial/mvebu-uart.c
@@ -71,6 +71,8 @@
#define UART_BRDV 0x10
#define BRDV_BAUD_MASK 0x3FF
+#define UART_OSAMP 0x14
+
#define MVEBU_NR_UARTS 2
#define MVEBU_UART_TYPE "mvebu-uart"
@@ -108,6 +110,17 @@ struct mvebu_uart_driver_data {
struct uart_flags flags;
};
+/* Saved registers during suspend */
+struct mvebu_uart_pm_regs {
+ unsigned int rbr;
+ unsigned int tsh;
+ unsigned int ctrl;
+ unsigned int intr;
+ unsigned int stat;
+ unsigned int brdv;
+ unsigned int osamp;
+};
+
/* MVEBU UART driver structure */
struct mvebu_uart {
struct uart_port *port;
@@ -115,6 +128,9 @@ struct mvebu_uart {
int irq[UART_IRQ_COUNT];
unsigned char __iomem *nb;
struct mvebu_uart_driver_data *data;
+#if defined(CONFIG_PM)
+ struct mvebu_uart_pm_regs pm_regs;
+#endif /* CONFIG_PM */
};
static struct mvebu_uart *to_mvuart(struct uart_port *port)
@@ -718,6 +734,51 @@ static struct uart_driver mvebu_uart_driver = {
#endif
};
+#if defined(CONFIG_PM)
+static int mvebu_uart_suspend(struct device *dev)
+{
+ struct mvebu_uart *mvuart = dev_get_drvdata(dev);
+ struct uart_port *port = mvuart->port;
+
+ uart_suspend_port(&mvebu_uart_driver, port);
+
+ mvuart->pm_regs.rbr = readl(port->membase + UART_RBR(port));
+ mvuart->pm_regs.tsh = readl(port->membase + UART_TSH(port));
+ mvuart->pm_regs.ctrl = readl(port->membase + UART_CTRL(port));
+ mvuart->pm_regs.intr = readl(port->membase + UART_INTR(port));
+ mvuart->pm_regs.stat = readl(port->membase + UART_STAT);
+ mvuart->pm_regs.brdv = readl(port->membase + UART_BRDV);
+ mvuart->pm_regs.osamp = readl(port->membase + UART_OSAMP);
+
+ device_set_wakeup_enable(dev, true);
+
+ return 0;
+}
+
+static int mvebu_uart_resume(struct device *dev)
+{
+ struct mvebu_uart *mvuart = dev_get_drvdata(dev);
+ struct uart_port *port = mvuart->port;
+
+ writel(mvuart->pm_regs.rbr, port->membase + UART_RBR(port));
+ writel(mvuart->pm_regs.tsh, port->membase + UART_TSH(port));
+ writel(mvuart->pm_regs.ctrl, port->membase + UART_CTRL(port));
+ writel(mvuart->pm_regs.intr, port->membase + UART_INTR(port));
+ writel(mvuart->pm_regs.stat, port->membase + UART_STAT);
+ writel(mvuart->pm_regs.brdv, port->membase + UART_BRDV);
+ writel(mvuart->pm_regs.osamp, port->membase + UART_OSAMP);
+
+ uart_resume_port(&mvebu_uart_driver, port);
+
+ return 0;
+}
+
+static const struct dev_pm_ops mvebu_uart_pm_ops = {
+ .suspend = mvebu_uart_suspend,
+ .resume = mvebu_uart_resume,
+};
+#endif /* CONFIG_PM */
+
static const struct of_device_id mvebu_uart_of_match[];
/* Counter to keep track of each UART port id when not using CONFIG_OF */
@@ -891,6 +952,9 @@ static struct platform_driver mvebu_uart_platform_driver = {
.name = "mvebu-uart",
.of_match_table = of_match_ptr(mvebu_uart_of_match),
.suppress_bind_attrs = true,
+#if defined(CONFIG_PM)
+ .pm = &mvebu_uart_pm_ops,
+#endif /* CONFIG_PM */
},
};
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index a1b3eb04cb32..c62e17c85f57 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -98,14 +98,13 @@ struct qcom_geni_serial_port {
enum geni_se_xfer_mode xfer_mode;
bool setup;
int (*handle_rx)(struct uart_port *uport, u32 bytes, bool drop);
- unsigned int xmit_size;
unsigned int baud;
unsigned int tx_bytes_pw;
unsigned int rx_bytes_pw;
bool brk;
};
-static const struct uart_ops qcom_geni_serial_pops;
+static const struct uart_ops qcom_geni_console_pops;
static struct uart_driver qcom_geni_console_driver;
static int handle_rx_console(struct uart_port *uport, u32 bytes, bool drop);
static unsigned int qcom_geni_serial_tx_empty(struct uart_port *port);
@@ -118,7 +117,14 @@ static const unsigned long root_freq[] = {7372800, 14745600, 19200000, 29491200,
#define to_dev_port(ptr, member) \
container_of(ptr, struct qcom_geni_serial_port, member)
-static struct qcom_geni_serial_port qcom_geni_console_port;
+static struct qcom_geni_serial_port qcom_geni_console_port = {
+ .uport = {
+ .iotype = UPIO_MEM,
+ .ops = &qcom_geni_console_pops,
+ .flags = UPF_BOOT_AUTOCONF,
+ .line = 0,
+ },
+};
static int qcom_geni_serial_request_port(struct uart_port *uport)
{
@@ -189,8 +195,19 @@ static bool qcom_geni_serial_poll_bit(struct uart_port *uport,
timeout_us = ((fifo_bits * USEC_PER_SEC) / baud) + 500;
}
- return !readl_poll_timeout_atomic(uport->membase + offset, reg,
- (bool)(reg & field) == set, 10, timeout_us);
+ /*
+ * Use custom implementation instead of readl_poll_atomic since ktimer
+ * is not ready at the time of early console.
+ */
+ timeout_us = DIV_ROUND_UP(timeout_us, 10) * 10;
+ while (timeout_us) {
+ reg = readl_relaxed(uport->membase + offset);
+ if ((bool)(reg & field) == set)
+ return true;
+ udelay(10);
+ timeout_us -= 10;
+ }
+ return false;
}
static void qcom_geni_serial_setup_tx(struct uart_port *uport, u32 xmit_size)
@@ -286,6 +303,10 @@ __qcom_geni_serial_console_write(struct uart_port *uport, const char *s,
u32 bytes_to_send = count;
for (i = 0; i < count; i++) {
+ /*
+ * uart_console_write() adds a carriage return for each newline.
+ * Account for additional bytes to be written.
+ */
if (s[i] == '\n')
bytes_to_send++;
}
@@ -305,7 +326,7 @@ __qcom_geni_serial_console_write(struct uart_port *uport, const char *s,
if (!qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS,
M_TX_FIFO_WATERMARK_EN, true))
break;
- chars_to_write = min_t(size_t, (size_t)(count - i), avail / 2);
+ chars_to_write = min_t(size_t, count - i, avail / 2);
uart_console_write(uport, s + i, chars_to_write,
qcom_geni_serial_wr_char);
writel_relaxed(M_TX_FIFO_WATERMARK_EN, uport->membase +
@@ -406,20 +427,18 @@ static void qcom_geni_serial_start_tx(struct uart_port *uport)
u32 status;
if (port->xfer_mode == GENI_SE_FIFO) {
- status = readl_relaxed(uport->membase + SE_GENI_STATUS);
+ /*
+ * readl ensures reading & writing of IRQ_EN register
+ * is not re-ordered before checking the status of the
+ * Serial Engine.
+ */
+ status = readl(uport->membase + SE_GENI_STATUS);
if (status & M_GENI_CMD_ACTIVE)
return;
if (!qcom_geni_serial_tx_empty(uport))
return;
- /*
- * Ensure writing to IRQ_EN & watermark registers are not
- * re-ordered before checking the status of the Serial
- * Engine and TX FIFO
- */
- mb();
-
irq_en = readl_relaxed(uport->membase + SE_GENI_M_IRQ_EN);
irq_en |= M_TX_FIFO_WATERMARK_EN | M_CMD_DONE_EN;
@@ -442,7 +461,6 @@ static void qcom_geni_serial_stop_tx(struct uart_port *uport)
writel_relaxed(0, uport->membase +
SE_GENI_TX_WATERMARK_REG);
}
- port->xmit_size = 0;
writel_relaxed(irq_en, uport->membase + SE_GENI_M_IRQ_EN);
status = readl_relaxed(uport->membase + SE_GENI_STATUS);
/* Possible stop tx is called multiple times. */
@@ -572,21 +590,14 @@ static void qcom_geni_serial_handle_tx(struct uart_port *uport)
chunk = uart_circ_chars_pending(xmit);
status = readl_relaxed(uport->membase + SE_GENI_TX_FIFO_STATUS);
/* Both FIFO and framework buffer are drained */
- if (chunk == port->xmit_size && !status) {
- port->xmit_size = 0;
- uart_circ_clear(xmit);
+ if (!chunk && !status) {
qcom_geni_serial_stop_tx(uport);
goto out_write_wakeup;
}
- chunk -= port->xmit_size;
avail = (port->tx_fifo_depth - port->tx_wm) * port->tx_bytes_pw;
- tail = (xmit->tail + port->xmit_size) & (UART_XMIT_SIZE - 1);
- if (chunk > (UART_XMIT_SIZE - tail))
- chunk = UART_XMIT_SIZE - tail;
- if (chunk > avail)
- chunk = avail;
-
+ tail = xmit->tail;
+ chunk = min3((size_t)chunk, (size_t)(UART_XMIT_SIZE - tail), avail);
if (!chunk)
goto out_write_wakeup;
@@ -595,24 +606,27 @@ static void qcom_geni_serial_handle_tx(struct uart_port *uport)
remaining = chunk;
for (i = 0; i < chunk; ) {
unsigned int tx_bytes;
- unsigned int buf = 0;
+ u8 buf[sizeof(u32)];
int c;
- tx_bytes = min_t(size_t, remaining, (size_t)port->tx_bytes_pw);
+ memset(buf, 0, ARRAY_SIZE(buf));
+ tx_bytes = min_t(size_t, remaining, port->tx_bytes_pw);
for (c = 0; c < tx_bytes ; c++)
- buf |= (xmit->buf[tail + c] << (c * BITS_PER_BYTE));
+ buf[c] = xmit->buf[tail + c];
- writel_relaxed(buf, uport->membase + SE_GENI_TX_FIFOn);
+ iowrite32_rep(uport->membase + SE_GENI_TX_FIFOn, buf, 1);
i += tx_bytes;
- tail = (tail + tx_bytes) & (UART_XMIT_SIZE - 1);
+ tail += tx_bytes;
uport->icount.tx += tx_bytes;
remaining -= tx_bytes;
}
+
+ xmit->tail = tail & (UART_XMIT_SIZE - 1);
qcom_geni_serial_poll_tx_done(uport);
- port->xmit_size += chunk;
out_write_wakeup:
- uart_write_wakeup(uport);
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(uport);
}
static irqreturn_t qcom_geni_serial_isr(int isr, void *dev)
@@ -627,7 +641,7 @@ static irqreturn_t qcom_geni_serial_isr(int isr, void *dev)
struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
if (uport->suspended)
- return IRQ_HANDLED;
+ return IRQ_NONE;
spin_lock_irqsave(&uport->lock, flags);
m_irq_status = readl_relaxed(uport->membase + SE_GENI_M_IRQ_STATUS);
@@ -667,20 +681,16 @@ out_unlock:
return IRQ_HANDLED;
}
-static int get_tx_fifo_size(struct qcom_geni_serial_port *port)
+static void get_tx_fifo_size(struct qcom_geni_serial_port *port)
{
struct uart_port *uport;
- if (!port)
- return -ENODEV;
-
uport = &port->uport;
port->tx_fifo_depth = geni_se_get_tx_fifo_depth(&port->se);
port->tx_fifo_width = geni_se_get_tx_fifo_width(&port->se);
port->rx_fifo_depth = geni_se_get_rx_fifo_depth(&port->se);
uport->fifosize =
(port->tx_fifo_depth * port->tx_fifo_width) / BITS_PER_BYTE;
- return 0;
}
static void set_rfr_wm(struct qcom_geni_serial_port *port)
@@ -702,7 +712,6 @@ static void qcom_geni_serial_shutdown(struct uart_port *uport)
/* Stop the console before stopping the current tx */
console_stop(uport->cons);
- disable_irq(uport->irq);
free_irq(uport->irq, uport);
spin_lock_irqsave(&uport->lock, flags);
qcom_geni_serial_stop_tx(uport);
@@ -892,7 +901,7 @@ out_restart_rx:
static unsigned int qcom_geni_serial_tx_empty(struct uart_port *uport)
{
- return !readl_relaxed(uport->membase + SE_GENI_TX_FIFO_STATUS);
+ return !readl(uport->membase + SE_GENI_TX_FIFO_STATUS);
}
#ifdef CONFIG_SERIAL_QCOM_GENI_CONSOLE
@@ -910,7 +919,7 @@ static int __init qcom_geni_console_setup(struct console *co, char *options)
port = get_port_from_line(co->index);
if (IS_ERR(port)) {
- pr_err("Invalid line %d(%d)\n", co->index, (int)PTR_ERR(port));
+ pr_err("Invalid line %d\n", co->index);
return PTR_ERR(port);
}
@@ -942,6 +951,65 @@ static int __init qcom_geni_console_setup(struct console *co, char *options)
return uart_set_options(uport, co, baud, parity, bits, flow);
}
+static void qcom_geni_serial_earlycon_write(struct console *con,
+ const char *s, unsigned int n)
+{
+ struct earlycon_device *dev = con->data;
+
+ __qcom_geni_serial_console_write(&dev->port, s, n);
+}
+
+static int __init qcom_geni_serial_earlycon_setup(struct earlycon_device *dev,
+ const char *opt)
+{
+ struct uart_port *uport = &dev->port;
+ u32 tx_trans_cfg;
+ u32 tx_parity_cfg = 0; /* Disable Tx Parity */
+ u32 rx_trans_cfg = 0;
+ u32 rx_parity_cfg = 0; /* Disable Rx Parity */
+ u32 stop_bit_len = 0; /* Default stop bit length - 1 bit */
+ u32 bits_per_char;
+ struct geni_se se;
+
+ if (!uport->membase)
+ return -EINVAL;
+
+ memset(&se, 0, sizeof(se));
+ se.base = uport->membase;
+ if (geni_se_read_proto(&se) != GENI_SE_UART)
+ return -ENXIO;
+ /*
+ * Ignore Flow control.
+ * n = 8.
+ */
+ tx_trans_cfg = UART_CTS_MASK;
+ bits_per_char = BITS_PER_BYTE;
+
+ /*
+ * Make an unconditional cancel on the main sequencer to reset
+ * it else we could end up in data loss scenarios.
+ */
+ qcom_geni_serial_poll_tx_done(uport);
+ qcom_geni_serial_abort_rx(uport);
+ geni_se_config_packing(&se, BITS_PER_BYTE, 1, false, true, false);
+ geni_se_init(&se, DEF_FIFO_DEPTH_WORDS / 2, DEF_FIFO_DEPTH_WORDS - 2);
+ geni_se_select_mode(&se, GENI_SE_FIFO);
+
+ writel_relaxed(tx_trans_cfg, uport->membase + SE_UART_TX_TRANS_CFG);
+ writel_relaxed(tx_parity_cfg, uport->membase + SE_UART_TX_PARITY_CFG);
+ writel_relaxed(rx_trans_cfg, uport->membase + SE_UART_RX_TRANS_CFG);
+ writel_relaxed(rx_parity_cfg, uport->membase + SE_UART_RX_PARITY_CFG);
+ writel_relaxed(bits_per_char, uport->membase + SE_UART_TX_WORD_LEN);
+ writel_relaxed(bits_per_char, uport->membase + SE_UART_RX_WORD_LEN);
+ writel_relaxed(stop_bit_len, uport->membase + SE_UART_TX_STOP_BIT_LEN);
+
+ dev->con->write = qcom_geni_serial_earlycon_write;
+ dev->con->setup = NULL;
+ return 0;
+}
+OF_EARLYCON_DECLARE(qcom_geni, "qcom,geni-debug-uart",
+ qcom_geni_serial_earlycon_setup);
+
static int __init console_register(struct uart_driver *drv)
{
return uart_register_driver(drv);
@@ -1026,16 +1094,13 @@ static int qcom_geni_serial_probe(struct platform_device *pdev)
if (pdev->dev.of_node)
line = of_alias_get_id(pdev->dev.of_node, "serial");
- else
- line = pdev->id;
if (line < 0 || line >= GENI_UART_CONS_PORTS)
return -ENXIO;
port = get_port_from_line(line);
if (IS_ERR(port)) {
- ret = PTR_ERR(port);
- dev_err(&pdev->dev, "Invalid line %d(%d)\n", line, ret);
- return ret;
+ dev_err(&pdev->dev, "Invalid line %d\n", line);
+ return PTR_ERR(port);
}
uport = &port->uport;
@@ -1072,7 +1137,6 @@ static int qcom_geni_serial_probe(struct platform_device *pdev)
uport->private_data = &qcom_geni_console_driver;
platform_set_drvdata(pdev, port);
port->handle_rx = handle_rx_console;
- port->setup = false;
return uart_add_one_port(&qcom_geni_console_driver, uport);
}
@@ -1087,8 +1151,7 @@ static int qcom_geni_serial_remove(struct platform_device *pdev)
static int __maybe_unused qcom_geni_serial_sys_suspend_noirq(struct device *dev)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct qcom_geni_serial_port *port = platform_get_drvdata(pdev);
+ struct qcom_geni_serial_port *port = dev_get_drvdata(dev);
struct uart_port *uport = &port->uport;
uart_suspend_port(uport->private_data, uport);
@@ -1097,12 +1160,19 @@ static int __maybe_unused qcom_geni_serial_sys_suspend_noirq(struct device *dev)
static int __maybe_unused qcom_geni_serial_sys_resume_noirq(struct device *dev)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct qcom_geni_serial_port *port = platform_get_drvdata(pdev);
+ struct qcom_geni_serial_port *port = dev_get_drvdata(dev);
struct uart_port *uport = &port->uport;
if (console_suspend_enabled && uport->suspended) {
uart_resume_port(uport->private_data, uport);
+ /*
+ * uart_suspend_port() invokes port shutdown which in turn
+ * frees the irq. uart_resume_port invokes port startup which
+ * performs request_irq. The request_irq auto-enables the IRQ.
+ * In addition, resume_noirq implicitly enables the IRQ and
+ * leads to an unbalanced IRQ enable warning. Disable the IRQ
+ * before returning so that the warning is suppressed.
+ */
disable_irq(uport->irq);
}
return 0;
@@ -1133,11 +1203,6 @@ static int __init qcom_geni_serial_init(void)
{
int ret;
- qcom_geni_console_port.uport.iotype = UPIO_MEM;
- qcom_geni_console_port.uport.ops = &qcom_geni_console_pops;
- qcom_geni_console_port.uport.flags = UPF_BOOT_AUTOCONF;
- qcom_geni_console_port.uport.line = 0;
-
ret = console_register(&qcom_geni_console_driver);
if (ret)
return ret;
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 3f2f8c118ce0..2f8fa184aafa 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -856,35 +856,54 @@ static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state)
static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p)
{
struct s3c24xx_uart_dma *dma = p->dma;
+ struct dma_slave_caps dma_caps;
+ const char *reason = NULL;
int ret;
/* Default slave configuration parameters */
dma->rx_conf.direction = DMA_DEV_TO_MEM;
dma->rx_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
dma->rx_conf.src_addr = p->port.mapbase + S3C2410_URXH;
- dma->rx_conf.src_maxburst = 16;
+ dma->rx_conf.src_maxburst = 1;
dma->tx_conf.direction = DMA_MEM_TO_DEV;
dma->tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
dma->tx_conf.dst_addr = p->port.mapbase + S3C2410_UTXH;
- if (dma_get_cache_alignment() >= 16)
- dma->tx_conf.dst_maxburst = 16;
- else
- dma->tx_conf.dst_maxburst = 1;
+ dma->tx_conf.dst_maxburst = 1;
dma->rx_chan = dma_request_chan(p->port.dev, "rx");
- if (IS_ERR(dma->rx_chan))
- return PTR_ERR(dma->rx_chan);
+ if (IS_ERR(dma->rx_chan)) {
+ reason = "DMA RX channel request failed";
+ ret = PTR_ERR(dma->rx_chan);
+ goto err_warn;
+ }
+
+ ret = dma_get_slave_caps(dma->rx_chan, &dma_caps);
+ if (ret < 0 ||
+ dma_caps.residue_granularity < DMA_RESIDUE_GRANULARITY_BURST) {
+ reason = "insufficient DMA RX engine capabilities";
+ ret = -EOPNOTSUPP;
+ goto err_release_rx;
+ }
dmaengine_slave_config(dma->rx_chan, &dma->rx_conf);
dma->tx_chan = dma_request_chan(p->port.dev, "tx");
if (IS_ERR(dma->tx_chan)) {
+ reason = "DMA TX channel request failed";
ret = PTR_ERR(dma->tx_chan);
goto err_release_rx;
}
+ ret = dma_get_slave_caps(dma->tx_chan, &dma_caps);
+ if (ret < 0 ||
+ dma_caps.residue_granularity < DMA_RESIDUE_GRANULARITY_BURST) {
+ reason = "insufficient DMA TX engine capabilities";
+ ret = -EOPNOTSUPP;
+ goto err_release_tx;
+ }
+
dmaengine_slave_config(dma->tx_chan, &dma->tx_conf);
/* RX buffer */
@@ -899,6 +918,7 @@ static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p)
dma->rx_addr = dma_map_single(p->port.dev, dma->rx_buf,
dma->rx_size, DMA_FROM_DEVICE);
if (dma_mapping_error(p->port.dev, dma->rx_addr)) {
+ reason = "DMA mapping error for RX buffer";
ret = -EIO;
goto err_free_rx;
}
@@ -907,6 +927,7 @@ static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p)
dma->tx_addr = dma_map_single(p->port.dev, p->port.state->xmit.buf,
UART_XMIT_SIZE, DMA_TO_DEVICE);
if (dma_mapping_error(p->port.dev, dma->tx_addr)) {
+ reason = "DMA mapping error for TX buffer";
ret = -EIO;
goto err_unmap_rx;
}
@@ -922,6 +943,9 @@ err_release_tx:
dma_release_channel(dma->tx_chan);
err_release_rx:
dma_release_channel(dma->rx_chan);
+err_warn:
+ if (reason)
+ dev_warn(p->port.dev, "%s, DMA will not be used\n", reason);
return ret;
}
@@ -1040,8 +1064,6 @@ static int s3c64xx_serial_startup(struct uart_port *port)
if (ourport->dma) {
ret = s3c24xx_serial_request_dma(ourport);
if (ret < 0) {
- dev_warn(port->dev,
- "DMA request failed, DMA will not be used\n");
devm_kfree(port->dev, ourport->dma);
ourport->dma = NULL;
}
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 65792a3539d0..243c96025053 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -1168,7 +1168,10 @@ static int sc16is7xx_probe(struct device *dev,
else
return PTR_ERR(s->clk);
} else {
- clk_prepare_enable(s->clk);
+ ret = clk_prepare_enable(s->clk);
+ if (ret)
+ return ret;
+
freq = clk_get_rate(s->clk);
}
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 0466f9f08a91..890b8832aff2 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -674,8 +674,8 @@ static void uart_send_xchar(struct tty_struct *tty, char ch)
static void uart_throttle(struct tty_struct *tty)
{
struct uart_state *state = tty->driver_data;
+ upstat_t mask = UPSTAT_SYNC_FIFO;
struct uart_port *port;
- upstat_t mask = 0;
port = uart_port_ref(state);
if (!port)
@@ -703,8 +703,8 @@ static void uart_throttle(struct tty_struct *tty)
static void uart_unthrottle(struct tty_struct *tty)
{
struct uart_state *state = tty->driver_data;
+ upstat_t mask = UPSTAT_SYNC_FIFO;
struct uart_port *port;
- upstat_t mask = 0;
port = uart_port_ref(state);
if (!port)
@@ -1829,19 +1829,6 @@ static int uart_proc_show(struct seq_file *m, void *v)
uart_line_info(m, drv, i);
return 0;
}
-
-static int uart_proc_open(struct inode *inode, struct file *file)
-{
- return single_open(file, uart_proc_show, PDE_DATA(inode));
-}
-
-static const struct file_operations uart_proc_fops = {
- .owner = THIS_MODULE,
- .open = uart_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
#endif
#if defined(CONFIG_SERIAL_CORE_CONSOLE) || defined(CONFIG_CONSOLE_POLL)
@@ -2415,7 +2402,7 @@ static const struct tty_operations uart_ops = {
.break_ctl = uart_break_ctl,
.wait_until_sent= uart_wait_until_sent,
#ifdef CONFIG_PROC_FS
- .proc_fops = &uart_proc_fops,
+ .proc_show = uart_proc_show,
#endif
.tiocmget = uart_tiocmget,
.tiocmset = uart_tiocmset,
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index fdbbff547106..c181eb37f985 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -160,6 +160,7 @@ struct sci_port {
#define SCI_NPORTS CONFIG_SERIAL_SH_SCI_NR_UARTS
static struct sci_port sci_ports[SCI_NPORTS];
+static unsigned long sci_ports_in_use;
static struct uart_driver sci_uart_driver;
static inline struct sci_port *
@@ -2390,6 +2391,27 @@ done:
uart_update_timeout(port, termios->c_cflag, baud);
+ /* byte size and parity */
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ bits = 7;
+ break;
+ case CS6:
+ bits = 8;
+ break;
+ case CS7:
+ bits = 9;
+ break;
+ default:
+ bits = 10;
+ break;
+ }
+
+ if (termios->c_cflag & CSTOPB)
+ bits++;
+ if (termios->c_cflag & PARENB)
+ bits++;
+
if (best_clk >= 0) {
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
switch (srr + 1) {
@@ -2406,8 +2428,27 @@ done:
serial_port_out(port, SCSCR, scr_val | s->hscif_tot);
serial_port_out(port, SCSMR, smr_val);
serial_port_out(port, SCBRR, brr);
- if (sci_getreg(port, HSSRR)->size)
- serial_port_out(port, HSSRR, srr | HSCIF_SRE);
+ if (sci_getreg(port, HSSRR)->size) {
+ unsigned int hssrr = srr | HSCIF_SRE;
+ /* Calculate deviation from intended rate at the
+ * center of the last stop bit in sampling clocks.
+ */
+ int last_stop = bits * 2 - 1;
+ int deviation = min_err * srr * last_stop / 2 / baud;
+
+ if (abs(deviation) >= 2) {
+ /* At least two sampling clocks off at the
+ * last stop bit; we can increase the error
+ * margin by shifting the sampling point.
+ */
+ int shift = min(-8, max(7, deviation / 2));
+
+ hssrr |= (shift << HSCIF_SRHP_SHIFT) &
+ HSCIF_SRHP_MASK;
+ hssrr |= HSCIF_SRDE;
+ }
+ serial_port_out(port, HSSRR, hssrr);
+ }
/* Wait one bit interval */
udelay((1000000 + (baud - 1)) / baud);
@@ -2474,27 +2515,6 @@ done:
* value obtained by this formula is too small. Therefore, if the value
* is smaller than 20ms, use 20ms as the timeout value for DMA.
*/
- /* byte size and parity */
- switch (termios->c_cflag & CSIZE) {
- case CS5:
- bits = 7;
- break;
- case CS6:
- bits = 8;
- break;
- case CS7:
- bits = 9;
- break;
- default:
- bits = 10;
- break;
- }
-
- if (termios->c_cflag & CSTOPB)
- bits++;
- if (termios->c_cflag & PARENB)
- bits++;
-
s->rx_frame = (10000 * bits) / (baud / 100);
#ifdef CONFIG_SERIAL_SH_SCI_DMA
s->rx_timeout = s->buf_len_rx * 2 * s->rx_frame;
@@ -2704,8 +2724,8 @@ found:
dev_dbg(dev, "failed to get %s (%ld)\n", clk_names[i],
PTR_ERR(clk));
else
- dev_dbg(dev, "clk %s is %pC rate %pCr\n", clk_names[i],
- clk, clk);
+ dev_dbg(dev, "clk %s is %pC rate %lu\n", clk_names[i],
+ clk, clk_get_rate(clk));
sci_port->clks[i] = IS_ERR(clk) ? NULL : clk;
}
return 0;
@@ -2890,16 +2910,15 @@ static void serial_console_write(struct console *co, const char *s,
unsigned long flags;
int locked = 1;
- local_irq_save(flags);
#if defined(SUPPORT_SYSRQ)
if (port->sysrq)
locked = 0;
else
#endif
if (oops_in_progress)
- locked = spin_trylock(&port->lock);
+ locked = spin_trylock_irqsave(&port->lock, flags);
else
- spin_lock(&port->lock);
+ spin_lock_irqsave(&port->lock, flags);
/* first save SCSCR then disable interrupts, keep clock source */
ctrl = serial_port_in(port, SCSCR);
@@ -2919,8 +2938,7 @@ static void serial_console_write(struct console *co, const char *s,
serial_port_out(port, SCSCR, ctrl);
if (locked)
- spin_unlock(&port->lock);
- local_irq_restore(flags);
+ spin_unlock_irqrestore(&port->lock, flags);
}
static int serial_console_setup(struct console *co, char *options)
@@ -3026,6 +3044,7 @@ static int sci_remove(struct platform_device *dev)
{
struct sci_port *port = platform_get_drvdata(dev);
+ sci_ports_in_use &= ~BIT(port->port.line);
uart_remove_one_port(&sci_uart_driver, &port->port);
sci_cleanup_single(port);
@@ -3107,6 +3126,8 @@ static struct plat_sci_port *sci_parse_dt(struct platform_device *pdev,
/* Get the line number from the aliases node. */
id = of_alias_get_id(np, "serial");
+ if (id < 0 && ~sci_ports_in_use)
+ id = ffz(sci_ports_in_use);
if (id < 0) {
dev_err(&pdev->dev, "failed to get alias id (%d)\n", id);
return NULL;
@@ -3141,6 +3162,9 @@ static int sci_probe_single(struct platform_device *dev,
dev_notice(&dev->dev, "Consider bumping CONFIG_SERIAL_SH_SCI_NR_UARTS!\n");
return -EINVAL;
}
+ BUILD_BUG_ON(SCI_NPORTS > sizeof(sci_ports_in_use) * 8);
+ if (sci_ports_in_use & BIT(index))
+ return -EBUSY;
mutex_lock(&sci_uart_registration_lock);
if (!sci_uart_driver.state) {
@@ -3239,6 +3263,7 @@ static int sci_probe(struct platform_device *dev)
sh_bios_gdb_detach();
#endif
+ sci_ports_in_use |= BIT(dev_id);
return 0;
}
diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h
index a5f792fd48d9..0b9e804e61a9 100644
--- a/drivers/tty/serial/sh-sci.h
+++ b/drivers/tty/serial/sh-sci.h
@@ -130,6 +130,10 @@ enum {
/* HSSRR HSCIF */
#define HSCIF_SRE BIT(15) /* Sampling Rate Register Enable */
+#define HSCIF_SRDE BIT(14) /* Sampling Point Register Enable */
+
+#define HSCIF_SRHP_SHIFT 8
+#define HSCIF_SRHP_MASK 0x0f00
/* SCPCR (Serial Port Control Register), SCIFA/SCIFB only */
#define SCPCR_RTSC BIT(4) /* Serial Port RTS# Pin / Output Pin */
diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c
index 5f9f01fac6dd..7971997cdead 100644
--- a/drivers/tty/serial/st-asc.c
+++ b/drivers/tty/serial/st-asc.c
@@ -842,16 +842,14 @@ static int asc_serial_remove(struct platform_device *pdev)
#ifdef CONFIG_PM_SLEEP
static int asc_serial_suspend(struct device *dev)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct uart_port *port = platform_get_drvdata(pdev);
+ struct uart_port *port = dev_get_drvdata(dev);
return uart_suspend_port(&asc_uart_driver, port);
}
static int asc_serial_resume(struct device *dev)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct uart_port *port = platform_get_drvdata(pdev);
+ struct uart_port *port = dev_get_drvdata(dev);
return uart_resume_port(&asc_uart_driver, port);
}
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index bd72dd843338..8a3e34234e98 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -1097,45 +1097,6 @@ static const struct uart_ops cdns_uart_ops = {
#endif
};
-static struct uart_port cdns_uart_port[CDNS_UART_NR_PORTS];
-
-/**
- * cdns_uart_get_port - Configure the port from platform device resource info
- * @id: Port id
- *
- * Return: a pointer to a uart_port or NULL for failure
- */
-static struct uart_port *cdns_uart_get_port(int id)
-{
- struct uart_port *port;
-
- /* Try the given port id if failed use default method */
- if (id < CDNS_UART_NR_PORTS && cdns_uart_port[id].mapbase != 0) {
- /* Find the next unused port */
- for (id = 0; id < CDNS_UART_NR_PORTS; id++)
- if (cdns_uart_port[id].mapbase == 0)
- break;
- }
-
- if (id >= CDNS_UART_NR_PORTS)
- return NULL;
-
- port = &cdns_uart_port[id];
-
- /* At this point, we've got an empty uart_port struct, initialize it */
- spin_lock_init(&port->lock);
- port->membase = NULL;
- port->irq = 0;
- port->type = PORT_UNKNOWN;
- port->iotype = UPIO_MEM32;
- port->flags = UPF_BOOT_AUTOCONF;
- port->ops = &cdns_uart_ops;
- port->fifosize = CDNS_UART_FIFO_SIZE;
- port->line = id;
- port->dev = NULL;
- return port;
-}
-
#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
/**
* cdns_uart_console_wait_tx - Wait for the TX to be full
@@ -1206,6 +1167,10 @@ OF_EARLYCON_DECLARE(cdns, "cdns,uart-r1p8", cdns_early_console_setup);
OF_EARLYCON_DECLARE(cdns, "cdns,uart-r1p12", cdns_early_console_setup);
OF_EARLYCON_DECLARE(cdns, "xlnx,zynqmp-uart", cdns_early_console_setup);
+
+/* Static pointer to console port */
+static struct uart_port *console_port;
+
/**
* cdns_uart_console_write - perform write operation
* @co: Console handle
@@ -1215,7 +1180,7 @@ OF_EARLYCON_DECLARE(cdns, "xlnx,zynqmp-uart", cdns_early_console_setup);
static void cdns_uart_console_write(struct console *co, const char *s,
unsigned int count)
{
- struct uart_port *port = &cdns_uart_port[co->index];
+ struct uart_port *port = console_port;
unsigned long flags;
unsigned int imr, ctrl;
int locked = 1;
@@ -1261,15 +1226,13 @@ static void cdns_uart_console_write(struct console *co, const char *s,
*/
static int __init cdns_uart_console_setup(struct console *co, char *options)
{
- struct uart_port *port = &cdns_uart_port[co->index];
+ struct uart_port *port = console_port;
+
int baud = 9600;
int bits = 8;
int parity = 'n';
int flow = 'n';
- if (co->index < 0 || co->index >= CDNS_UART_NR_PORTS)
- return -EINVAL;
-
if (!port->membase) {
pr_debug("console on " CDNS_UART_TTY_NAME "%i not present\n",
co->index);
@@ -1293,20 +1256,6 @@ static struct console cdns_uart_console = {
.index = -1, /* Specified on the cmdline (e.g. console=ttyPS ) */
.data = &cdns_uart_uart_driver,
};
-
-/**
- * cdns_uart_console_init - Initialization call
- *
- * Return: 0 on success, negative errno otherwise
- */
-static int __init cdns_uart_console_init(void)
-{
- register_console(&cdns_uart_console);
- return 0;
-}
-
-console_initcall(cdns_uart_console_init);
-
#endif /* CONFIG_SERIAL_XILINX_PS_UART_CONSOLE */
static struct uart_driver cdns_uart_uart_driver = {
@@ -1430,8 +1379,7 @@ static int cdns_uart_resume(struct device *device)
#endif /* ! CONFIG_PM_SLEEP */
static int __maybe_unused cdns_runtime_suspend(struct device *dev)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct uart_port *port = platform_get_drvdata(pdev);
+ struct uart_port *port = dev_get_drvdata(dev);
struct cdns_uart *cdns_uart = port->private_data;
clk_disable(cdns_uart->uartclk);
@@ -1441,8 +1389,7 @@ static int __maybe_unused cdns_runtime_suspend(struct device *dev)
static int __maybe_unused cdns_runtime_resume(struct device *dev)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct uart_port *port = platform_get_drvdata(pdev);
+ struct uart_port *port = dev_get_drvdata(dev);
struct cdns_uart *cdns_uart = port->private_data;
clk_enable(cdns_uart->pclk);
@@ -1487,6 +1434,9 @@ static int cdns_uart_probe(struct platform_device *pdev)
GFP_KERNEL);
if (!cdns_uart_data)
return -ENOMEM;
+ port = devm_kzalloc(&pdev->dev, sizeof(*port), GFP_KERNEL);
+ if (!port)
+ return -ENOMEM;
match = of_match_node(cdns_uart_of_match, pdev->dev.of_node);
if (match && match->data) {
@@ -1552,15 +1502,24 @@ static int cdns_uart_probe(struct platform_device *pdev)
if (id < 0)
id = 0;
- /* Initialize the port structure */
- port = cdns_uart_get_port(id);
-
- if (!port) {
+ if (id >= CDNS_UART_NR_PORTS) {
dev_err(&pdev->dev, "Cannot get uart_port structure\n");
rc = -ENODEV;
goto err_out_notif_unreg;
}
+ /* At this point, we've got an empty uart_port struct, initialize it */
+ spin_lock_init(&port->lock);
+ port->membase = NULL;
+ port->irq = 0;
+ port->type = PORT_UNKNOWN;
+ port->iotype = UPIO_MEM32;
+ port->flags = UPF_BOOT_AUTOCONF;
+ port->ops = &cdns_uart_ops;
+ port->fifosize = CDNS_UART_FIFO_SIZE;
+ port->line = id;
+ port->dev = NULL;
+
/*
* Register the port.
* This function also registers this device with the tty layer
@@ -1579,6 +1538,17 @@ static int cdns_uart_probe(struct platform_device *pdev)
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
+#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
+ /*
+ * If console hasn't been found yet try to assign this port
+ * because it is required to be assigned for console setup function.
+ * If register_console() don't assign value, then console_port pointer
+ * is cleanup.
+ */
+ if (cdns_uart_uart_driver.cons->index == -1)
+ console_port = port;
+#endif
+
rc = uart_add_one_port(&cdns_uart_uart_driver, port);
if (rc) {
dev_err(&pdev->dev,
@@ -1586,6 +1556,12 @@ static int cdns_uart_probe(struct platform_device *pdev)
goto err_out_pm_disable;
}
+#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
+ /* This is not port which is used for console that's why clean it up */
+ if (cdns_uart_uart_driver.cons->index == -1)
+ console_port = NULL;
+#endif
+
return 0;
err_out_pm_disable:
diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c
index 3c4ad71f261d..fbdf4d01c6a9 100644
--- a/drivers/tty/synclink.c
+++ b/drivers/tty/synclink.c
@@ -3534,19 +3534,6 @@ static int mgsl_proc_show(struct seq_file *m, void *v)
return 0;
}
-static int mgsl_proc_open(struct inode *inode, struct file *file)
-{
- return single_open(file, mgsl_proc_show, NULL);
-}
-
-static const struct file_operations mgsl_proc_fops = {
- .owner = THIS_MODULE,
- .open = mgsl_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
/* mgsl_allocate_dma_buffers()
*
* Allocate and format DMA buffers (ISA adapter)
@@ -4298,7 +4285,7 @@ static const struct tty_operations mgsl_ops = {
.tiocmget = tiocmget,
.tiocmset = tiocmset,
.get_icount = msgl_get_icount,
- .proc_fops = &mgsl_proc_fops,
+ .proc_show = mgsl_proc_show,
};
/*
diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c
index 255c49687877..a94086597ebd 100644
--- a/drivers/tty/synclink_gt.c
+++ b/drivers/tty/synclink_gt.c
@@ -1316,19 +1316,6 @@ static int synclink_gt_proc_show(struct seq_file *m, void *v)
return 0;
}
-static int synclink_gt_proc_open(struct inode *inode, struct file *file)
-{
- return single_open(file, synclink_gt_proc_show, NULL);
-}
-
-static const struct file_operations synclink_gt_proc_fops = {
- .owner = THIS_MODULE,
- .open = synclink_gt_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
/*
* return count of bytes in transmit buffer
*/
@@ -3721,7 +3708,7 @@ static const struct tty_operations ops = {
.tiocmget = tiocmget,
.tiocmset = tiocmset,
.get_icount = get_icount,
- .proc_fops = &synclink_gt_proc_fops,
+ .proc_show = synclink_gt_proc_show,
};
static void slgt_cleanup(void)
diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c
index 75f11ce1f0a1..1e4d5b9c981a 100644
--- a/drivers/tty/synclinkmp.c
+++ b/drivers/tty/synclinkmp.c
@@ -1421,19 +1421,6 @@ static int synclinkmp_proc_show(struct seq_file *m, void *v)
return 0;
}
-static int synclinkmp_proc_open(struct inode *inode, struct file *file)
-{
- return single_open(file, synclinkmp_proc_show, NULL);
-}
-
-static const struct file_operations synclinkmp_proc_fops = {
- .owner = THIS_MODULE,
- .open = synclinkmp_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
/* Return the count of bytes in transmit buffer
*/
static int chars_in_buffer(struct tty_struct *tty)
@@ -3899,7 +3886,7 @@ static const struct tty_operations ops = {
.tiocmget = tiocmget,
.tiocmset = tiocmset,
.get_icount = get_icount,
- .proc_fops = &synclinkmp_proc_fops,
+ .proc_show = synclinkmp_proc_show,
};
diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c
index d9b561d89432..d99fec44036c 100644
--- a/drivers/tty/tty_ioctl.c
+++ b/drivers/tty/tty_ioctl.c
@@ -290,7 +290,7 @@ EXPORT_SYMBOL(tty_termios_copy_hw);
* between the two termios structures, or a speed change is needed.
*/
-int tty_termios_hw_change(struct ktermios *a, struct ktermios *b)
+int tty_termios_hw_change(const struct ktermios *a, const struct ktermios *b)
{
if (a->c_ispeed != b->c_ispeed || a->c_ospeed != b->c_ospeed)
return 1;
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index fb7329ab2b37..fc4c97cae01e 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -229,26 +229,13 @@ static int tty_ldiscs_seq_show(struct seq_file *m, void *v)
return 0;
}
-static const struct seq_operations tty_ldiscs_seq_ops = {
+const struct seq_operations tty_ldiscs_seq_ops = {
.start = tty_ldiscs_seq_start,
.next = tty_ldiscs_seq_next,
.stop = tty_ldiscs_seq_stop,
.show = tty_ldiscs_seq_show,
};
-static int proc_tty_ldiscs_open(struct inode *inode, struct file *file)
-{
- return seq_open(file, &tty_ldiscs_seq_ops);
-}
-
-const struct file_operations tty_ldiscs_proc_fops = {
- .owner = THIS_MODULE,
- .open = proc_tty_ldiscs_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = seq_release,
-};
-
/**
* tty_ldisc_ref_wait - wait for the tty ldisc
* @tty: tty device
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index f97251f39c26..1eb1a376a041 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -1178,15 +1178,8 @@ static void csi_J(struct vc_data *vc, int vpar)
count = ((vc->vc_pos - vc->vc_origin) >> 1) + 1;
start = (unsigned short *)vc->vc_origin;
break;
- case 3: /* erase scroll-back buffer (and whole display) */
- scr_memsetw(vc->vc_screenbuf, vc->vc_video_erase_char,
- vc->vc_screenbuf_size);
- flush_scrollback(vc);
- set_origin(vc);
- if (con_is_visible(vc))
- update_screen(vc);
- /* fall through */
case 2: /* erase whole display */
+ case 3: /* (and scrollback buffer later) */
count = vc->vc_cols * vc->vc_rows;
start = (unsigned short *)vc->vc_origin;
break;
@@ -1194,7 +1187,12 @@ static void csi_J(struct vc_data *vc, int vpar)
return;
}
scr_memsetw(start, vc->vc_video_erase_char, 2 * count);
- if (con_should_update(vc))
+ if (vpar == 3) {
+ set_origin(vc);
+ flush_scrollback(vc);
+ if (con_is_visible(vc))
+ update_screen(vc);
+ } else if (con_should_update(vc))
do_update_region(vc, (unsigned long) start, count);
vc->vc_need_wrap = 0;
}