summaryrefslogtreecommitdiff
path: root/include/asm-arm/arch-lh7a40x/registers.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-arm/arch-lh7a40x/registers.h')
-rw-r--r--include/asm-arm/arch-lh7a40x/registers.h65
1 files changed, 48 insertions, 17 deletions
diff --git a/include/asm-arm/arch-lh7a40x/registers.h b/include/asm-arm/arch-lh7a40x/registers.h
index 2edb22e35450..b4f09b3e2d03 100644
--- a/include/asm-arm/arch-lh7a40x/registers.h
+++ b/include/asm-arm/arch-lh7a40x/registers.h
@@ -9,7 +9,6 @@
*
*/
-#include <linux/config.h>
#include <asm/arch/constants.h>
#ifndef __ASM_ARCH_REGISTERS_H
@@ -18,7 +17,7 @@
/* Physical register base addresses */
-#define AC97_PHYS (0x80000000) /* AC97 Controller */
+#define AC97C_PHYS (0x80000000) /* AC97 Controller */
#define MMC_PHYS (0x80000100) /* Multimedia Card Controller */
#define USB_PHYS (0x80000200) /* USB Client */
#define SCI_PHYS (0x80000300) /* Secure Card Interface */
@@ -35,6 +34,8 @@
#define RTC_PHYS (0x80000d00) /* Real-time Clock */
#define GPIO_PHYS (0x80000e00) /* General Purpose IO */
#define BMI_PHYS (0x80000f00) /* Battery Monitor Interface */
+#define HRTFTC_PHYS (0x80001000) /* High-res TFT Controller (LH7A400) */
+#define ALI_PHYS (0x80001000) /* Advanced LCD Interface (LH7A404) */
#define WDT_PHYS (0x80001400) /* Watchdog Timer */
#define SMC_PHYS (0x80002000) /* Static Memory Controller */
#define SDRC_PHYS (0x80002400) /* SDRAM Controller */
@@ -43,6 +44,7 @@
/* Physical registers of the LH7A404 */
+#define ADC_PHYS (0x80001300) /* A/D & Touchscreen Controller */
#define VIC1_PHYS (0x80008000) /* Vectored Interrupt Controller 1 */
#define USBH_PHYS (0x80009000) /* USB OHCI host controller */
#define VIC2_PHYS (0x8000a000) /* Vectored Interrupt Controller 2 */
@@ -53,10 +55,32 @@
/* Clock/State Controller register */
+#define CSC_PWRSR __REG(CSC_PHYS + 0x00) /* Reset register & ID */
#define CSC_PWRCNT __REG(CSC_PHYS + 0x04) /* Power control */
+#define CSC_CLKSET __REG(CSC_PHYS + 0x20) /* Clock speed control */
+#define CSC_USBDRESET __REG(CSC_PHYS + 0x4c) /* USB Device resets */
#define CSC_PWRCNT_USBH_EN (1<<28) /* USB Host power enable */
-
+#define CSC_PWRCNT_DMAC_M2M1_EN (1<<27)
+#define CSC_PWRCNT_DMAC_M2M0_EN (1<<26)
+#define CSC_PWRCNT_DMAC_M2P8_EN (1<<25)
+#define CSC_PWRCNT_DMAC_M2P9_EN (1<<24)
+#define CSC_PWRCNT_DMAC_M2P6_EN (1<<23)
+#define CSC_PWRCNT_DMAC_M2P7_EN (1<<22)
+#define CSC_PWRCNT_DMAC_M2P4_EN (1<<21)
+#define CSC_PWRCNT_DMAC_M2P5_EN (1<<20)
+#define CSC_PWRCNT_DMAC_M2P2_EN (1<<19)
+#define CSC_PWRCNT_DMAC_M2P3_EN (1<<18)
+#define CSC_PWRCNT_DMAC_M2P0_EN (1<<17)
+#define CSC_PWRCNT_DMAC_M2P1_EN (1<<16)
+
+#define CSC_PWRSR_CHIPMAN_SHIFT (24)
+#define CSC_PWRSR_CHIPMAN_MASK (0xff)
+#define CSC_PWRSR_CHIPID_SHIFT (16)
+#define CSC_PWRSR_CHIPID_MASK (0xff)
+
+#define CSC_USBDRESET_APBRESETREG (1<<1)
+#define CSC_USBDRESET_IORESETREG (1<<0)
/* Interrupt Controller registers */
@@ -109,6 +133,13 @@
#define GPIO_GPIOFEOI __REG(GPIO_PHYS + 0x54) /* GPIO End-of-Interrupt */
#define GPIO_GPIOINTEN __REG(GPIO_PHYS + 0x58) /* GPIO Interrupt Enable */
#define GPIO_INTSTATUS __REG(GPIO_PHYS + 0x5c) /* GPIO Interrupt Status */
+#define GPIO_PINMUX __REG(GPIO_PHYS + 0x2c)
+#define GPIO_PADD __REG(GPIO_PHYS + 0x10)
+#define GPIO_PAD __REG(GPIO_PHYS + 0x00)
+#define GPIO_PCD __REG(GPIO_PHYS + 0x08)
+#define GPIO_PCDD __REG(GPIO_PHYS + 0x18)
+#define GPIO_PEDD __REG(GPIO_PHYS + 0x24)
+#define GPIO_PED __REG(GPIO_PHYS + 0x20)
/* Static Memory Controller registers */
@@ -138,20 +169,21 @@
#endif
#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
-# define CPLD_CONTROL __REG8(CPLD02_PHYS)
-# define CPLD_SPI_DATA __REG8(CPLD06_PHYS)
-# define CPLD_SPI_CONTROL __REG8(CPLD08_PHYS)
-# define CPLD_SPI_EEPROM __REG8(CPLD0A_PHYS)
-# define CPLD_INTERRUPTS __REG8(CPLD0C_PHYS) /* IRQ mask/status */
-# define CPLD_BOOT_MODE __REG8(CPLD0E_PHYS)
-# define CPLD_FLASH __REG8(CPLD10_PHYS)
-# define CPLD_POWER_MGMT __REG8(CPLD12_PHYS)
-# define CPLD_REVISION __REG8(CPLD14_PHYS)
-# define CPLD_GPIO_EXT __REG8(CPLD16_PHYS)
-# define CPLD_GPIO_DATA __REG8(CPLD18_PHYS)
-# define CPLD_GPIO_DIR __REG8(CPLD1A_PHYS)
-#endif
+# define CPLD_CONTROL __REG16(CPLD02_PHYS)
+# define CPLD_SPI_DATA __REG16(CPLD06_PHYS)
+# define CPLD_SPI_CONTROL __REG16(CPLD08_PHYS)
+# define CPLD_SPI_EEPROM __REG16(CPLD0A_PHYS)
+# define CPLD_INTERRUPTS __REG16(CPLD0C_PHYS) /* IRQ mask/status */
+# define CPLD_BOOT_MODE __REG16(CPLD0E_PHYS)
+# define CPLD_FLASH __REG16(CPLD10_PHYS)
+# define CPLD_POWER_MGMT __REG16(CPLD12_PHYS)
+# define CPLD_REVISION __REG16(CPLD14_PHYS)
+# define CPLD_GPIO_EXT __REG16(CPLD16_PHYS)
+# define CPLD_GPIO_DATA __REG16(CPLD18_PHYS)
+# define CPLD_GPIO_DIR __REG16(CPLD1A_PHYS)
+
+#endif
/* Timer registers */
@@ -190,4 +222,3 @@
#endif /* _ASM_ARCH_REGISTERS_H */
-