diff options
Diffstat (limited to 'include/uapi/linux')
47 files changed, 2071 insertions, 608 deletions
diff --git a/include/uapi/linux/android/binder.h b/include/uapi/linux/android/binder.h index ec84ad106568..20e435fe657a 100644 --- a/include/uapi/linux/android/binder.h +++ b/include/uapi/linux/android/binder.h @@ -217,6 +217,18 @@ struct binder_node_info_for_ref { __u32 reserved3; }; +struct binder_freeze_info { + __u32 pid; + __u32 enable; + __u32 timeout_ms; +}; + +struct binder_frozen_status_info { + __u32 pid; + __u32 sync_recv; + __u32 async_recv; +}; + #define BINDER_WRITE_READ _IOWR('b', 1, struct binder_write_read) #define BINDER_SET_IDLE_TIMEOUT _IOW('b', 3, __s64) #define BINDER_SET_MAX_THREADS _IOW('b', 5, __u32) @@ -227,6 +239,9 @@ struct binder_node_info_for_ref { #define BINDER_GET_NODE_DEBUG_INFO _IOWR('b', 11, struct binder_node_debug_info) #define BINDER_GET_NODE_INFO_FOR_REF _IOWR('b', 12, struct binder_node_info_for_ref) #define BINDER_SET_CONTEXT_MGR_EXT _IOW('b', 13, struct flat_binder_object) +#define BINDER_FREEZE _IOW('b', 14, struct binder_freeze_info) +#define BINDER_GET_FROZEN_INFO _IOWR('b', 15, struct binder_frozen_status_info) +#define BINDER_ENABLE_ONEWAY_SPAM_DETECTION _IOW('b', 16, __u32) /* * NOTE: Two special error codes you should check for when calling @@ -408,6 +423,19 @@ enum binder_driver_return_protocol { * The last transaction (either a bcTRANSACTION or * a bcATTEMPT_ACQUIRE) failed (e.g. out of memory). No parameters. */ + + BR_FROZEN_REPLY = _IO('r', 18), + /* + * The target of the last transaction (either a bcTRANSACTION or + * a bcATTEMPT_ACQUIRE) is frozen. No parameters. + */ + + BR_ONEWAY_SPAM_SUSPECT = _IO('r', 19), + /* + * Current process sent too many oneway calls to target, and the last + * asynchronous transaction makes the allocated async buffer size exceed + * detection threshold. No parameters. + */ }; enum binder_driver_command_protocol { diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 4ba4ef0ff63a..e1ee1be7e49b 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -93,7 +93,738 @@ union bpf_iter_link_info { } map; }; -/* BPF syscall commands, see bpf(2) man-page for details. */ +/* BPF syscall commands, see bpf(2) man-page for more details. */ +/** + * DOC: eBPF Syscall Preamble + * + * The operation to be performed by the **bpf**\ () system call is determined + * by the *cmd* argument. Each operation takes an accompanying argument, + * provided via *attr*, which is a pointer to a union of type *bpf_attr* (see + * below). The size argument is the size of the union pointed to by *attr*. + */ +/** + * DOC: eBPF Syscall Commands + * + * BPF_MAP_CREATE + * Description + * Create a map and return a file descriptor that refers to the + * map. The close-on-exec file descriptor flag (see **fcntl**\ (2)) + * is automatically enabled for the new file descriptor. + * + * Applying **close**\ (2) to the file descriptor returned by + * **BPF_MAP_CREATE** will delete the map (but see NOTES). + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_MAP_LOOKUP_ELEM + * Description + * Look up an element with a given *key* in the map referred to + * by the file descriptor *map_fd*. + * + * The *flags* argument may be specified as one of the + * following: + * + * **BPF_F_LOCK** + * Look up the value of a spin-locked map without + * returning the lock. This must be specified if the + * elements contain a spinlock. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_MAP_UPDATE_ELEM + * Description + * Create or update an element (key/value pair) in a specified map. + * + * The *flags* argument should be specified as one of the + * following: + * + * **BPF_ANY** + * Create a new element or update an existing element. + * **BPF_NOEXIST** + * Create a new element only if it did not exist. + * **BPF_EXIST** + * Update an existing element. + * **BPF_F_LOCK** + * Update a spin_lock-ed map element. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * May set *errno* to **EINVAL**, **EPERM**, **ENOMEM**, + * **E2BIG**, **EEXIST**, or **ENOENT**. + * + * **E2BIG** + * The number of elements in the map reached the + * *max_entries* limit specified at map creation time. + * **EEXIST** + * If *flags* specifies **BPF_NOEXIST** and the element + * with *key* already exists in the map. + * **ENOENT** + * If *flags* specifies **BPF_EXIST** and the element with + * *key* does not exist in the map. + * + * BPF_MAP_DELETE_ELEM + * Description + * Look up and delete an element by key in a specified map. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_MAP_GET_NEXT_KEY + * Description + * Look up an element by key in a specified map and return the key + * of the next element. Can be used to iterate over all elements + * in the map. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * The following cases can be used to iterate over all elements of + * the map: + * + * * If *key* is not found, the operation returns zero and sets + * the *next_key* pointer to the key of the first element. + * * If *key* is found, the operation returns zero and sets the + * *next_key* pointer to the key of the next element. + * * If *key* is the last element, returns -1 and *errno* is set + * to **ENOENT**. + * + * May set *errno* to **ENOMEM**, **EFAULT**, **EPERM**, or + * **EINVAL** on error. + * + * BPF_PROG_LOAD + * Description + * Verify and load an eBPF program, returning a new file + * descriptor associated with the program. + * + * Applying **close**\ (2) to the file descriptor returned by + * **BPF_PROG_LOAD** will unload the eBPF program (but see NOTES). + * + * The close-on-exec file descriptor flag (see **fcntl**\ (2)) is + * automatically enabled for the new file descriptor. + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_OBJ_PIN + * Description + * Pin an eBPF program or map referred by the specified *bpf_fd* + * to the provided *pathname* on the filesystem. + * + * The *pathname* argument must not contain a dot ("."). + * + * On success, *pathname* retains a reference to the eBPF object, + * preventing deallocation of the object when the original + * *bpf_fd* is closed. This allow the eBPF object to live beyond + * **close**\ (\ *bpf_fd*\ ), and hence the lifetime of the parent + * process. + * + * Applying **unlink**\ (2) or similar calls to the *pathname* + * unpins the object from the filesystem, removing the reference. + * If no other file descriptors or filesystem nodes refer to the + * same object, it will be deallocated (see NOTES). + * + * The filesystem type for the parent directory of *pathname* must + * be **BPF_FS_MAGIC**. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_OBJ_GET + * Description + * Open a file descriptor for the eBPF object pinned to the + * specified *pathname*. + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_PROG_ATTACH + * Description + * Attach an eBPF program to a *target_fd* at the specified + * *attach_type* hook. + * + * The *attach_type* specifies the eBPF attachment point to + * attach the program to, and must be one of *bpf_attach_type* + * (see below). + * + * The *attach_bpf_fd* must be a valid file descriptor for a + * loaded eBPF program of a cgroup, flow dissector, LIRC, sockmap + * or sock_ops type corresponding to the specified *attach_type*. + * + * The *target_fd* must be a valid file descriptor for a kernel + * object which depends on the attach type of *attach_bpf_fd*: + * + * **BPF_PROG_TYPE_CGROUP_DEVICE**, + * **BPF_PROG_TYPE_CGROUP_SKB**, + * **BPF_PROG_TYPE_CGROUP_SOCK**, + * **BPF_PROG_TYPE_CGROUP_SOCK_ADDR**, + * **BPF_PROG_TYPE_CGROUP_SOCKOPT**, + * **BPF_PROG_TYPE_CGROUP_SYSCTL**, + * **BPF_PROG_TYPE_SOCK_OPS** + * + * Control Group v2 hierarchy with the eBPF controller + * enabled. Requires the kernel to be compiled with + * **CONFIG_CGROUP_BPF**. + * + * **BPF_PROG_TYPE_FLOW_DISSECTOR** + * + * Network namespace (eg /proc/self/ns/net). + * + * **BPF_PROG_TYPE_LIRC_MODE2** + * + * LIRC device path (eg /dev/lircN). Requires the kernel + * to be compiled with **CONFIG_BPF_LIRC_MODE2**. + * + * **BPF_PROG_TYPE_SK_SKB**, + * **BPF_PROG_TYPE_SK_MSG** + * + * eBPF map of socket type (eg **BPF_MAP_TYPE_SOCKHASH**). + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_PROG_DETACH + * Description + * Detach the eBPF program associated with the *target_fd* at the + * hook specified by *attach_type*. The program must have been + * previously attached using **BPF_PROG_ATTACH**. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_PROG_TEST_RUN + * Description + * Run the eBPF program associated with the *prog_fd* a *repeat* + * number of times against a provided program context *ctx_in* and + * data *data_in*, and return the modified program context + * *ctx_out*, *data_out* (for example, packet data), result of the + * execution *retval*, and *duration* of the test run. + * + * The sizes of the buffers provided as input and output + * parameters *ctx_in*, *ctx_out*, *data_in*, and *data_out* must + * be provided in the corresponding variables *ctx_size_in*, + * *ctx_size_out*, *data_size_in*, and/or *data_size_out*. If any + * of these parameters are not provided (ie set to NULL), the + * corresponding size field must be zero. + * + * Some program types have particular requirements: + * + * **BPF_PROG_TYPE_SK_LOOKUP** + * *data_in* and *data_out* must be NULL. + * + * **BPF_PROG_TYPE_XDP** + * *ctx_in* and *ctx_out* must be NULL. + * + * **BPF_PROG_TYPE_RAW_TRACEPOINT**, + * **BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE** + * + * *ctx_out*, *data_in* and *data_out* must be NULL. + * *repeat* must be zero. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * **ENOSPC** + * Either *data_size_out* or *ctx_size_out* is too small. + * **ENOTSUPP** + * This command is not supported by the program type of + * the program referred to by *prog_fd*. + * + * BPF_PROG_GET_NEXT_ID + * Description + * Fetch the next eBPF program currently loaded into the kernel. + * + * Looks for the eBPF program with an id greater than *start_id* + * and updates *next_id* on success. If no other eBPF programs + * remain with ids higher than *start_id*, returns -1 and sets + * *errno* to **ENOENT**. + * + * Return + * Returns zero on success. On error, or when no id remains, -1 + * is returned and *errno* is set appropriately. + * + * BPF_MAP_GET_NEXT_ID + * Description + * Fetch the next eBPF map currently loaded into the kernel. + * + * Looks for the eBPF map with an id greater than *start_id* + * and updates *next_id* on success. If no other eBPF maps + * remain with ids higher than *start_id*, returns -1 and sets + * *errno* to **ENOENT**. + * + * Return + * Returns zero on success. On error, or when no id remains, -1 + * is returned and *errno* is set appropriately. + * + * BPF_PROG_GET_FD_BY_ID + * Description + * Open a file descriptor for the eBPF program corresponding to + * *prog_id*. + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_MAP_GET_FD_BY_ID + * Description + * Open a file descriptor for the eBPF map corresponding to + * *map_id*. + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_OBJ_GET_INFO_BY_FD + * Description + * Obtain information about the eBPF object corresponding to + * *bpf_fd*. + * + * Populates up to *info_len* bytes of *info*, which will be in + * one of the following formats depending on the eBPF object type + * of *bpf_fd*: + * + * * **struct bpf_prog_info** + * * **struct bpf_map_info** + * * **struct bpf_btf_info** + * * **struct bpf_link_info** + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_PROG_QUERY + * Description + * Obtain information about eBPF programs associated with the + * specified *attach_type* hook. + * + * The *target_fd* must be a valid file descriptor for a kernel + * object which depends on the attach type of *attach_bpf_fd*: + * + * **BPF_PROG_TYPE_CGROUP_DEVICE**, + * **BPF_PROG_TYPE_CGROUP_SKB**, + * **BPF_PROG_TYPE_CGROUP_SOCK**, + * **BPF_PROG_TYPE_CGROUP_SOCK_ADDR**, + * **BPF_PROG_TYPE_CGROUP_SOCKOPT**, + * **BPF_PROG_TYPE_CGROUP_SYSCTL**, + * **BPF_PROG_TYPE_SOCK_OPS** + * + * Control Group v2 hierarchy with the eBPF controller + * enabled. Requires the kernel to be compiled with + * **CONFIG_CGROUP_BPF**. + * + * **BPF_PROG_TYPE_FLOW_DISSECTOR** + * + * Network namespace (eg /proc/self/ns/net). + * + * **BPF_PROG_TYPE_LIRC_MODE2** + * + * LIRC device path (eg /dev/lircN). Requires the kernel + * to be compiled with **CONFIG_BPF_LIRC_MODE2**. + * + * **BPF_PROG_QUERY** always fetches the number of programs + * attached and the *attach_flags* which were used to attach those + * programs. Additionally, if *prog_ids* is nonzero and the number + * of attached programs is less than *prog_cnt*, populates + * *prog_ids* with the eBPF program ids of the programs attached + * at *target_fd*. + * + * The following flags may alter the result: + * + * **BPF_F_QUERY_EFFECTIVE** + * Only return information regarding programs which are + * currently effective at the specified *target_fd*. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_RAW_TRACEPOINT_OPEN + * Description + * Attach an eBPF program to a tracepoint *name* to access kernel + * internal arguments of the tracepoint in their raw form. + * + * The *prog_fd* must be a valid file descriptor associated with + * a loaded eBPF program of type **BPF_PROG_TYPE_RAW_TRACEPOINT**. + * + * No ABI guarantees are made about the content of tracepoint + * arguments exposed to the corresponding eBPF program. + * + * Applying **close**\ (2) to the file descriptor returned by + * **BPF_RAW_TRACEPOINT_OPEN** will delete the map (but see NOTES). + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_BTF_LOAD + * Description + * Verify and load BPF Type Format (BTF) metadata into the kernel, + * returning a new file descriptor associated with the metadata. + * BTF is described in more detail at + * https://www.kernel.org/doc/html/latest/bpf/btf.html. + * + * The *btf* parameter must point to valid memory providing + * *btf_size* bytes of BTF binary metadata. + * + * The returned file descriptor can be passed to other **bpf**\ () + * subcommands such as **BPF_PROG_LOAD** or **BPF_MAP_CREATE** to + * associate the BTF with those objects. + * + * Similar to **BPF_PROG_LOAD**, **BPF_BTF_LOAD** has optional + * parameters to specify a *btf_log_buf*, *btf_log_size* and + * *btf_log_level* which allow the kernel to return freeform log + * output regarding the BTF verification process. + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_BTF_GET_FD_BY_ID + * Description + * Open a file descriptor for the BPF Type Format (BTF) + * corresponding to *btf_id*. + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_TASK_FD_QUERY + * Description + * Obtain information about eBPF programs associated with the + * target process identified by *pid* and *fd*. + * + * If the *pid* and *fd* are associated with a tracepoint, kprobe + * or uprobe perf event, then the *prog_id* and *fd_type* will + * be populated with the eBPF program id and file descriptor type + * of type **bpf_task_fd_type**. If associated with a kprobe or + * uprobe, the *probe_offset* and *probe_addr* will also be + * populated. Optionally, if *buf* is provided, then up to + * *buf_len* bytes of *buf* will be populated with the name of + * the tracepoint, kprobe or uprobe. + * + * The resulting *prog_id* may be introspected in deeper detail + * using **BPF_PROG_GET_FD_BY_ID** and **BPF_OBJ_GET_INFO_BY_FD**. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_MAP_LOOKUP_AND_DELETE_ELEM + * Description + * Look up an element with the given *key* in the map referred to + * by the file descriptor *fd*, and if found, delete the element. + * + * The **BPF_MAP_TYPE_QUEUE** and **BPF_MAP_TYPE_STACK** map types + * implement this command as a "pop" operation, deleting the top + * element rather than one corresponding to *key*. + * The *key* and *key_len* parameters should be zeroed when + * issuing this operation for these map types. + * + * This command is only valid for the following map types: + * * **BPF_MAP_TYPE_QUEUE** + * * **BPF_MAP_TYPE_STACK** + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_MAP_FREEZE + * Description + * Freeze the permissions of the specified map. + * + * Write permissions may be frozen by passing zero *flags*. + * Upon success, no future syscall invocations may alter the + * map state of *map_fd*. Write operations from eBPF programs + * are still possible for a frozen map. + * + * Not supported for maps of type **BPF_MAP_TYPE_STRUCT_OPS**. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_BTF_GET_NEXT_ID + * Description + * Fetch the next BPF Type Format (BTF) object currently loaded + * into the kernel. + * + * Looks for the BTF object with an id greater than *start_id* + * and updates *next_id* on success. If no other BTF objects + * remain with ids higher than *start_id*, returns -1 and sets + * *errno* to **ENOENT**. + * + * Return + * Returns zero on success. On error, or when no id remains, -1 + * is returned and *errno* is set appropriately. + * + * BPF_MAP_LOOKUP_BATCH + * Description + * Iterate and fetch multiple elements in a map. + * + * Two opaque values are used to manage batch operations, + * *in_batch* and *out_batch*. Initially, *in_batch* must be set + * to NULL to begin the batched operation. After each subsequent + * **BPF_MAP_LOOKUP_BATCH**, the caller should pass the resultant + * *out_batch* as the *in_batch* for the next operation to + * continue iteration from the current point. + * + * The *keys* and *values* are output parameters which must point + * to memory large enough to hold *count* items based on the key + * and value size of the map *map_fd*. The *keys* buffer must be + * of *key_size* * *count*. The *values* buffer must be of + * *value_size* * *count*. + * + * The *elem_flags* argument may be specified as one of the + * following: + * + * **BPF_F_LOCK** + * Look up the value of a spin-locked map without + * returning the lock. This must be specified if the + * elements contain a spinlock. + * + * On success, *count* elements from the map are copied into the + * user buffer, with the keys copied into *keys* and the values + * copied into the corresponding indices in *values*. + * + * If an error is returned and *errno* is not **EFAULT**, *count* + * is set to the number of successfully processed elements. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * May set *errno* to **ENOSPC** to indicate that *keys* or + * *values* is too small to dump an entire bucket during + * iteration of a hash-based map type. + * + * BPF_MAP_LOOKUP_AND_DELETE_BATCH + * Description + * Iterate and delete all elements in a map. + * + * This operation has the same behavior as + * **BPF_MAP_LOOKUP_BATCH** with two exceptions: + * + * * Every element that is successfully returned is also deleted + * from the map. This is at least *count* elements. Note that + * *count* is both an input and an output parameter. + * * Upon returning with *errno* set to **EFAULT**, up to + * *count* elements may be deleted without returning the keys + * and values of the deleted elements. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_MAP_UPDATE_BATCH + * Description + * Update multiple elements in a map by *key*. + * + * The *keys* and *values* are input parameters which must point + * to memory large enough to hold *count* items based on the key + * and value size of the map *map_fd*. The *keys* buffer must be + * of *key_size* * *count*. The *values* buffer must be of + * *value_size* * *count*. + * + * Each element specified in *keys* is sequentially updated to the + * value in the corresponding index in *values*. The *in_batch* + * and *out_batch* parameters are ignored and should be zeroed. + * + * The *elem_flags* argument should be specified as one of the + * following: + * + * **BPF_ANY** + * Create new elements or update a existing elements. + * **BPF_NOEXIST** + * Create new elements only if they do not exist. + * **BPF_EXIST** + * Update existing elements. + * **BPF_F_LOCK** + * Update spin_lock-ed map elements. This must be + * specified if the map value contains a spinlock. + * + * On success, *count* elements from the map are updated. + * + * If an error is returned and *errno* is not **EFAULT**, *count* + * is set to the number of successfully processed elements. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * May set *errno* to **EINVAL**, **EPERM**, **ENOMEM**, or + * **E2BIG**. **E2BIG** indicates that the number of elements in + * the map reached the *max_entries* limit specified at map + * creation time. + * + * May set *errno* to one of the following error codes under + * specific circumstances: + * + * **EEXIST** + * If *flags* specifies **BPF_NOEXIST** and the element + * with *key* already exists in the map. + * **ENOENT** + * If *flags* specifies **BPF_EXIST** and the element with + * *key* does not exist in the map. + * + * BPF_MAP_DELETE_BATCH + * Description + * Delete multiple elements in a map by *key*. + * + * The *keys* parameter is an input parameter which must point + * to memory large enough to hold *count* items based on the key + * size of the map *map_fd*, that is, *key_size* * *count*. + * + * Each element specified in *keys* is sequentially deleted. The + * *in_batch*, *out_batch*, and *values* parameters are ignored + * and should be zeroed. + * + * The *elem_flags* argument may be specified as one of the + * following: + * + * **BPF_F_LOCK** + * Look up the value of a spin-locked map without + * returning the lock. This must be specified if the + * elements contain a spinlock. + * + * On success, *count* elements from the map are updated. + * + * If an error is returned and *errno* is not **EFAULT**, *count* + * is set to the number of successfully processed elements. If + * *errno* is **EFAULT**, up to *count* elements may be been + * deleted. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_LINK_CREATE + * Description + * Attach an eBPF program to a *target_fd* at the specified + * *attach_type* hook and return a file descriptor handle for + * managing the link. + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_LINK_UPDATE + * Description + * Update the eBPF program in the specified *link_fd* to + * *new_prog_fd*. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_LINK_GET_FD_BY_ID + * Description + * Open a file descriptor for the eBPF Link corresponding to + * *link_id*. + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_LINK_GET_NEXT_ID + * Description + * Fetch the next eBPF link currently loaded into the kernel. + * + * Looks for the eBPF link with an id greater than *start_id* + * and updates *next_id* on success. If no other eBPF links + * remain with ids higher than *start_id*, returns -1 and sets + * *errno* to **ENOENT**. + * + * Return + * Returns zero on success. On error, or when no id remains, -1 + * is returned and *errno* is set appropriately. + * + * BPF_ENABLE_STATS + * Description + * Enable eBPF runtime statistics gathering. + * + * Runtime statistics gathering for the eBPF runtime is disabled + * by default to minimize the corresponding performance overhead. + * This command enables statistics globally. + * + * Multiple programs may independently enable statistics. + * After gathering the desired statistics, eBPF runtime statistics + * may be disabled again by calling **close**\ (2) for the file + * descriptor returned by this function. Statistics will only be + * disabled system-wide when all outstanding file descriptors + * returned by prior calls for this subcommand are closed. + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_ITER_CREATE + * Description + * Create an iterator on top of the specified *link_fd* (as + * previously created using **BPF_LINK_CREATE**) and return a + * file descriptor that can be used to trigger the iteration. + * + * If the resulting file descriptor is pinned to the filesystem + * using **BPF_OBJ_PIN**, then subsequent **read**\ (2) syscalls + * for that path will trigger the iterator to read kernel state + * using the eBPF program attached to *link_fd*. + * + * Return + * A new file descriptor (a nonnegative integer), or -1 if an + * error occurred (in which case, *errno* is set appropriately). + * + * BPF_LINK_DETACH + * Description + * Forcefully detach the specified *link_fd* from its + * corresponding attachment point. + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * BPF_PROG_BIND_MAP + * Description + * Bind a map to the lifetime of an eBPF program. + * + * The map identified by *map_fd* is bound to the program + * identified by *prog_fd* and only released when *prog_fd* is + * released. This may be used in cases where metadata should be + * associated with a program which otherwise does not contain any + * references to the map (for example, embedded in the eBPF + * program instructions). + * + * Return + * Returns zero on success. On error, -1 is returned and *errno* + * is set appropriately. + * + * NOTES + * eBPF objects (maps and programs) can be shared between processes. + * + * * After **fork**\ (2), the child inherits file descriptors + * referring to the same eBPF objects. + * * File descriptors referring to eBPF objects can be transferred over + * **unix**\ (7) domain sockets. + * * File descriptors referring to eBPF objects can be duplicated in the + * usual way, using **dup**\ (2) and similar calls. + * * File descriptors referring to eBPF objects can be pinned to the + * filesystem using the **BPF_OBJ_PIN** command of **bpf**\ (2). + * + * An eBPF object is deallocated only after all file descriptors referring + * to the object have been closed and no references remain pinned to the + * filesystem or attached (for example, bound to a program or device). + */ enum bpf_cmd { BPF_MAP_CREATE, BPF_MAP_LOOKUP_ELEM, @@ -247,6 +978,7 @@ enum bpf_attach_type { BPF_XDP_CPUMAP, BPF_SK_LOOKUP, BPF_XDP, + BPF_SK_SKB_VERDICT, __MAX_BPF_ATTACH_TYPE }; @@ -393,11 +1125,24 @@ enum bpf_link_type { * is struct/union. */ #define BPF_PSEUDO_BTF_ID 3 +/* insn[0].src_reg: BPF_PSEUDO_FUNC + * insn[0].imm: insn offset to the func + * insn[1].imm: 0 + * insn[0].off: 0 + * insn[1].off: 0 + * ldimm64 rewrite: address of the function + * verifier type: PTR_TO_FUNC. + */ +#define BPF_PSEUDO_FUNC 4 /* when bpf_call->src_reg == BPF_PSEUDO_CALL, bpf_call->imm == pc-relative * offset to another bpf function */ #define BPF_PSEUDO_CALL 1 +/* when bpf_call->src_reg == BPF_PSEUDO_KFUNC_CALL, + * bpf_call->imm == btf_id of a BTF_KIND_FUNC in the running kernel + */ +#define BPF_PSEUDO_KFUNC_CALL 2 /* flags for BPF_MAP_UPDATE_ELEM command */ enum { @@ -720,7 +1465,7 @@ union bpf_attr { * parsed and used to produce a manual page. The workflow is the following, * and requires the rst2man utility: * - * $ ./scripts/bpf_helpers_doc.py \ + * $ ./scripts/bpf_doc.py \ * --filename include/uapi/linux/bpf.h > /tmp/bpf-helpers.rst * $ rst2man /tmp/bpf-helpers.rst > /tmp/bpf-helpers.7 * $ man /tmp/bpf-helpers.7 @@ -1765,6 +2510,10 @@ union bpf_attr { * Use with ENCAP_L3/L4 flags to further specify the tunnel * type; *len* is the length of the inner MAC header. * + * * **BPF_F_ADJ_ROOM_ENCAP_L2_ETH**: + * Use with BPF_F_ADJ_ROOM_ENCAP_L2 flag to further specify the + * L2 type as Ethernet. + * * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be @@ -3915,6 +4664,34 @@ union bpf_attr { * * **BPF_MTU_CHK_RET_FRAG_NEEDED** * * **BPF_MTU_CHK_RET_SEGS_TOOBIG** * + * long bpf_for_each_map_elem(struct bpf_map *map, void *callback_fn, void *callback_ctx, u64 flags) + * Description + * For each element in **map**, call **callback_fn** function with + * **map**, **callback_ctx** and other map-specific parameters. + * The **callback_fn** should be a static function and + * the **callback_ctx** should be a pointer to the stack. + * The **flags** is used to control certain aspects of the helper. + * Currently, the **flags** must be 0. + * + * The following are a list of supported map types and their + * respective expected callback signatures: + * + * BPF_MAP_TYPE_HASH, BPF_MAP_TYPE_PERCPU_HASH, + * BPF_MAP_TYPE_LRU_HASH, BPF_MAP_TYPE_LRU_PERCPU_HASH, + * BPF_MAP_TYPE_ARRAY, BPF_MAP_TYPE_PERCPU_ARRAY + * + * long (\*callback_fn)(struct bpf_map \*map, const void \*key, void \*value, void \*ctx); + * + * For per_cpu maps, the map_value is the value on the cpu where the + * bpf_prog is running. + * + * If **callback_fn** return 0, the helper will continue to the next + * element. If return value is 1, the helper will skip the rest of + * elements and return. Other return values are not used now. + * + * Return + * The number of traversed map elements for success, **-EINVAL** for + * invalid **flags**. */ #define __BPF_FUNC_MAPPER(FN) \ FN(unspec), \ @@ -4081,6 +4858,7 @@ union bpf_attr { FN(ima_inode_hash), \ FN(sock_from_file), \ FN(check_mtu), \ + FN(for_each_map_elem), \ /* */ /* integer value in 'imm' field of BPF_CALL instruction selects which helper @@ -4174,6 +4952,7 @@ enum { BPF_F_ADJ_ROOM_ENCAP_L4_GRE = (1ULL << 3), BPF_F_ADJ_ROOM_ENCAP_L4_UDP = (1ULL << 4), BPF_F_ADJ_ROOM_NO_CSUM_RESET = (1ULL << 5), + BPF_F_ADJ_ROOM_ENCAP_L2_ETH = (1ULL << 6), }; enum { @@ -5211,7 +5990,10 @@ struct bpf_pidns_info { /* User accessible data for SK_LOOKUP programs. Add new fields at the end. */ struct bpf_sk_lookup { - __bpf_md_ptr(struct bpf_sock *, sk); /* Selected socket */ + union { + __bpf_md_ptr(struct bpf_sock *, sk); /* Selected socket */ + __u64 cookie; /* Non-zero if socket was selected in PROG_TEST_RUN */ + }; __u32 family; /* Protocol family (AF_INET, AF_INET6) */ __u32 protocol; /* IP protocol (IPPROTO_TCP, IPPROTO_UDP) */ diff --git a/include/uapi/linux/btf.h b/include/uapi/linux/btf.h index 5a667107ad2c..d27b1708efe9 100644 --- a/include/uapi/linux/btf.h +++ b/include/uapi/linux/btf.h @@ -52,7 +52,7 @@ struct btf_type { }; }; -#define BTF_INFO_KIND(info) (((info) >> 24) & 0x0f) +#define BTF_INFO_KIND(info) (((info) >> 24) & 0x1f) #define BTF_INFO_VLEN(info) ((info) & 0xffff) #define BTF_INFO_KFLAG(info) ((info) >> 31) @@ -72,7 +72,8 @@ struct btf_type { #define BTF_KIND_FUNC_PROTO 13 /* Function Proto */ #define BTF_KIND_VAR 14 /* Variable */ #define BTF_KIND_DATASEC 15 /* Section */ -#define BTF_KIND_MAX BTF_KIND_DATASEC +#define BTF_KIND_FLOAT 16 /* Floating point */ +#define BTF_KIND_MAX BTF_KIND_FLOAT #define NR_BTF_KINDS (BTF_KIND_MAX + 1) /* For some specific BTF_KIND, "struct btf_type" is immediately diff --git a/include/uapi/linux/cec.h b/include/uapi/linux/cec.h index 7d1a06c52469..dc8879d179fd 100644 --- a/include/uapi/linux/cec.h +++ b/include/uapi/linux/cec.h @@ -396,6 +396,7 @@ struct cec_drm_connector_info { * associated with the CEC adapter. * @type: connector type (if any) * @drm: drm connector info + * @raw: array to pad the union */ struct cec_connector_info { __u32 type; @@ -453,7 +454,7 @@ struct cec_event_lost_msgs { * struct cec_event - CEC event structure * @ts: the timestamp of when the event was sent. * @event: the event. - * array. + * @flags: event flags. * @state_change: the event payload for CEC_EVENT_STATE_CHANGE. * @lost_msgs: the event payload for CEC_EVENT_LOST_MSGS. * @raw: array to pad the union. diff --git a/include/uapi/linux/cyclades.h b/include/uapi/linux/cyclades.h deleted file mode 100644 index fc0add2194a9..000000000000 --- a/include/uapi/linux/cyclades.h +++ /dev/null @@ -1,494 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* $Revision: 3.0 $$Date: 1998/11/02 14:20:59 $ - * linux/include/linux/cyclades.h - * - * This file was initially written by - * Randolph Bentson <bentson@grieg.seaslug.org> and is maintained by - * Ivan Passos <ivan@cyclades.com>. - * - * This file contains the general definitions for the cyclades.c driver - *$Log: cyclades.h,v $ - *Revision 3.1 2002/01/29 11:36:16 henrique - *added throttle field on struct cyclades_port to indicate whether the - *port is throttled or not - * - *Revision 3.1 2000/04/19 18:52:52 ivan - *converted address fields to unsigned long and added fields for physical - *addresses on cyclades_card structure; - * - *Revision 3.0 1998/11/02 14:20:59 ivan - *added nports field on cyclades_card structure; - * - *Revision 2.5 1998/08/03 16:57:01 ivan - *added cyclades_idle_stats structure; - * - *Revision 2.4 1998/06/01 12:09:53 ivan - *removed closing_wait2 from cyclades_port structure; - * - *Revision 2.3 1998/03/16 18:01:12 ivan - *changes in the cyclades_port structure to get it closer to the - *standard serial port structure; - *added constants for new ioctls; - * - *Revision 2.2 1998/02/17 16:50:00 ivan - *changes in the cyclades_port structure (addition of shutdown_wait and - *chip_rev variables); - *added constants for new ioctls and for CD1400 rev. numbers. - * - *Revision 2.1 1997/10/24 16:03:00 ivan - *added rflow (which allows enabling the CD1400 special flow control - *feature) and rtsdtr_inv (which allows DTR/RTS pin inversion) to - *cyclades_port structure; - *added Alpha support - * - *Revision 2.0 1997/06/30 10:30:00 ivan - *added some new doorbell command constants related to IOCTLW and - *UART error signaling - * - *Revision 1.8 1997/06/03 15:30:00 ivan - *added constant ZFIRM_HLT - *added constant CyPCI_Ze_win ( = 2 * Cy_PCI_Zwin) - * - *Revision 1.7 1997/03/26 10:30:00 daniel - *new entries at the end of cyclades_port struct to reallocate - *variables illegally allocated within card memory. - * - *Revision 1.6 1996/09/09 18:35:30 bentson - *fold in changes for Cyclom-Z -- including structures for - *communicating with board as well modest changes to original - *structures to support new features. - * - *Revision 1.5 1995/11/13 21:13:31 bentson - *changes suggested by Michael Chastain <mec@duracef.shout.net> - *to support use of this file in non-kernel applications - * - * - */ - -#ifndef _UAPI_LINUX_CYCLADES_H -#define _UAPI_LINUX_CYCLADES_H - -#include <linux/types.h> - -struct cyclades_monitor { - unsigned long int_count; - unsigned long char_count; - unsigned long char_max; - unsigned long char_last; -}; - -/* - * These stats all reflect activity since the device was last initialized. - * (i.e., since the port was opened with no other processes already having it - * open) - */ -struct cyclades_idle_stats { - __kernel_old_time_t in_use; /* Time device has been in use (secs) */ - __kernel_old_time_t recv_idle; /* Time since last char received (secs) */ - __kernel_old_time_t xmit_idle; /* Time since last char transmitted (secs) */ - unsigned long recv_bytes; /* Bytes received */ - unsigned long xmit_bytes; /* Bytes transmitted */ - unsigned long overruns; /* Input overruns */ - unsigned long frame_errs; /* Input framing errors */ - unsigned long parity_errs; /* Input parity errors */ -}; - -#define CYCLADES_MAGIC 0x4359 - -#define CYGETMON 0x435901 -#define CYGETTHRESH 0x435902 -#define CYSETTHRESH 0x435903 -#define CYGETDEFTHRESH 0x435904 -#define CYSETDEFTHRESH 0x435905 -#define CYGETTIMEOUT 0x435906 -#define CYSETTIMEOUT 0x435907 -#define CYGETDEFTIMEOUT 0x435908 -#define CYSETDEFTIMEOUT 0x435909 -#define CYSETRFLOW 0x43590a -#define CYGETRFLOW 0x43590b -#define CYSETRTSDTR_INV 0x43590c -#define CYGETRTSDTR_INV 0x43590d -#define CYZSETPOLLCYCLE 0x43590e -#define CYZGETPOLLCYCLE 0x43590f -#define CYGETCD1400VER 0x435910 -#define CYSETWAIT 0x435912 -#define CYGETWAIT 0x435913 - -/*************** CYCLOM-Z ADDITIONS ***************/ - -#define CZIOC ('M' << 8) -#define CZ_NBOARDS (CZIOC|0xfa) -#define CZ_BOOT_START (CZIOC|0xfb) -#define CZ_BOOT_DATA (CZIOC|0xfc) -#define CZ_BOOT_END (CZIOC|0xfd) -#define CZ_TEST (CZIOC|0xfe) - -#define CZ_DEF_POLL (HZ/25) - -#define MAX_BOARD 4 /* Max number of boards */ -#define MAX_DEV 256 /* Max number of ports total */ -#define CYZ_MAX_SPEED 921600 - -#define CYZ_FIFO_SIZE 16 - -#define CYZ_BOOT_NWORDS 0x100 -struct CYZ_BOOT_CTRL { - unsigned short nboard; - int status[MAX_BOARD]; - int nchannel[MAX_BOARD]; - int fw_rev[MAX_BOARD]; - unsigned long offset; - unsigned long data[CYZ_BOOT_NWORDS]; -}; - - -#ifndef DP_WINDOW_SIZE -/* - * Memory Window Sizes - */ - -#define DP_WINDOW_SIZE (0x00080000) /* window size 512 Kb */ -#define ZE_DP_WINDOW_SIZE (0x00100000) /* window size 1 Mb (Ze and - 8Zo V.2 */ -#define CTRL_WINDOW_SIZE (0x00000080) /* runtime regs 128 bytes */ - -/* - * CUSTOM_REG - Cyclom-Z/PCI Custom Registers Set. The driver - * normally will access only interested on the fpga_id, fpga_version, - * start_cpu and stop_cpu. - */ - -struct CUSTOM_REG { - __u32 fpga_id; /* FPGA Identification Register */ - __u32 fpga_version; /* FPGA Version Number Register */ - __u32 cpu_start; /* CPU start Register (write) */ - __u32 cpu_stop; /* CPU stop Register (write) */ - __u32 misc_reg; /* Miscellaneous Register */ - __u32 idt_mode; /* IDT mode Register */ - __u32 uart_irq_status; /* UART IRQ status Register */ - __u32 clear_timer0_irq; /* Clear timer interrupt Register */ - __u32 clear_timer1_irq; /* Clear timer interrupt Register */ - __u32 clear_timer2_irq; /* Clear timer interrupt Register */ - __u32 test_register; /* Test Register */ - __u32 test_count; /* Test Count Register */ - __u32 timer_select; /* Timer select register */ - __u32 pr_uart_irq_status; /* Prioritized UART IRQ stat Reg */ - __u32 ram_wait_state; /* RAM wait-state Register */ - __u32 uart_wait_state; /* UART wait-state Register */ - __u32 timer_wait_state; /* timer wait-state Register */ - __u32 ack_wait_state; /* ACK wait State Register */ -}; - -/* - * RUNTIME_9060 - PLX PCI9060ES local configuration and shared runtime - * registers. This structure can be used to access the 9060 registers - * (memory mapped). - */ - -struct RUNTIME_9060 { - __u32 loc_addr_range; /* 00h - Local Address Range */ - __u32 loc_addr_base; /* 04h - Local Address Base */ - __u32 loc_arbitr; /* 08h - Local Arbitration */ - __u32 endian_descr; /* 0Ch - Big/Little Endian Descriptor */ - __u32 loc_rom_range; /* 10h - Local ROM Range */ - __u32 loc_rom_base; /* 14h - Local ROM Base */ - __u32 loc_bus_descr; /* 18h - Local Bus descriptor */ - __u32 loc_range_mst; /* 1Ch - Local Range for Master to PCI */ - __u32 loc_base_mst; /* 20h - Local Base for Master PCI */ - __u32 loc_range_io; /* 24h - Local Range for Master IO */ - __u32 pci_base_mst; /* 28h - PCI Base for Master PCI */ - __u32 pci_conf_io; /* 2Ch - PCI configuration for Master IO */ - __u32 filler1; /* 30h */ - __u32 filler2; /* 34h */ - __u32 filler3; /* 38h */ - __u32 filler4; /* 3Ch */ - __u32 mail_box_0; /* 40h - Mail Box 0 */ - __u32 mail_box_1; /* 44h - Mail Box 1 */ - __u32 mail_box_2; /* 48h - Mail Box 2 */ - __u32 mail_box_3; /* 4Ch - Mail Box 3 */ - __u32 filler5; /* 50h */ - __u32 filler6; /* 54h */ - __u32 filler7; /* 58h */ - __u32 filler8; /* 5Ch */ - __u32 pci_doorbell; /* 60h - PCI to Local Doorbell */ - __u32 loc_doorbell; /* 64h - Local to PCI Doorbell */ - __u32 intr_ctrl_stat; /* 68h - Interrupt Control/Status */ - __u32 init_ctrl; /* 6Ch - EEPROM control, Init Control, etc */ -}; - -/* Values for the Local Base Address re-map register */ - -#define WIN_RAM 0x00000001L /* set the sliding window to RAM */ -#define WIN_CREG 0x14000001L /* set the window to custom Registers */ - -/* Values timer select registers */ - -#define TIMER_BY_1M 0x00 /* clock divided by 1M */ -#define TIMER_BY_256K 0x01 /* clock divided by 256k */ -#define TIMER_BY_128K 0x02 /* clock divided by 128k */ -#define TIMER_BY_32K 0x03 /* clock divided by 32k */ - -/****************** ****************** *******************/ -#endif - -#ifndef ZFIRM_ID -/* #include "zfwint.h" */ -/****************** ****************** *******************/ -/* - * This file contains the definitions for interfacing with the - * Cyclom-Z ZFIRM Firmware. - */ - -/* General Constant definitions */ - -#define MAX_CHAN 64 /* max number of channels per board */ - -/* firmware id structure (set after boot) */ - -#define ID_ADDRESS 0x00000180L /* signature/pointer address */ -#define ZFIRM_ID 0x5557465AL /* ZFIRM/U signature */ -#define ZFIRM_HLT 0x59505B5CL /* ZFIRM needs external power supply */ -#define ZFIRM_RST 0x56040674L /* RST signal (due to FW reset) */ - -#define ZF_TINACT_DEF 1000 /* default inactivity timeout - (1000 ms) */ -#define ZF_TINACT ZF_TINACT_DEF - -struct FIRM_ID { - __u32 signature; /* ZFIRM/U signature */ - __u32 zfwctrl_addr; /* pointer to ZFW_CTRL structure */ -}; - -/* Op. System id */ - -#define C_OS_LINUX 0x00000030 /* generic Linux system */ - -/* channel op_mode */ - -#define C_CH_DISABLE 0x00000000 /* channel is disabled */ -#define C_CH_TXENABLE 0x00000001 /* channel Tx enabled */ -#define C_CH_RXENABLE 0x00000002 /* channel Rx enabled */ -#define C_CH_ENABLE 0x00000003 /* channel Tx/Rx enabled */ -#define C_CH_LOOPBACK 0x00000004 /* Loopback mode */ - -/* comm_parity - parity */ - -#define C_PR_NONE 0x00000000 /* None */ -#define C_PR_ODD 0x00000001 /* Odd */ -#define C_PR_EVEN 0x00000002 /* Even */ -#define C_PR_MARK 0x00000004 /* Mark */ -#define C_PR_SPACE 0x00000008 /* Space */ -#define C_PR_PARITY 0x000000ff - -#define C_PR_DISCARD 0x00000100 /* discard char with frame/par error */ -#define C_PR_IGNORE 0x00000200 /* ignore frame/par error */ - -/* comm_data_l - data length and stop bits */ - -#define C_DL_CS5 0x00000001 -#define C_DL_CS6 0x00000002 -#define C_DL_CS7 0x00000004 -#define C_DL_CS8 0x00000008 -#define C_DL_CS 0x0000000f -#define C_DL_1STOP 0x00000010 -#define C_DL_15STOP 0x00000020 -#define C_DL_2STOP 0x00000040 -#define C_DL_STOP 0x000000f0 - -/* interrupt enabling/status */ - -#define C_IN_DISABLE 0x00000000 /* zero, disable interrupts */ -#define C_IN_TXBEMPTY 0x00000001 /* tx buffer empty */ -#define C_IN_TXLOWWM 0x00000002 /* tx buffer below LWM */ -#define C_IN_RXHIWM 0x00000010 /* rx buffer above HWM */ -#define C_IN_RXNNDT 0x00000020 /* rx no new data timeout */ -#define C_IN_MDCD 0x00000100 /* modem DCD change */ -#define C_IN_MDSR 0x00000200 /* modem DSR change */ -#define C_IN_MRI 0x00000400 /* modem RI change */ -#define C_IN_MCTS 0x00000800 /* modem CTS change */ -#define C_IN_RXBRK 0x00001000 /* Break received */ -#define C_IN_PR_ERROR 0x00002000 /* parity error */ -#define C_IN_FR_ERROR 0x00004000 /* frame error */ -#define C_IN_OVR_ERROR 0x00008000 /* overrun error */ -#define C_IN_RXOFL 0x00010000 /* RX buffer overflow */ -#define C_IN_IOCTLW 0x00020000 /* I/O control w/ wait */ -#define C_IN_MRTS 0x00040000 /* modem RTS drop */ -#define C_IN_ICHAR 0x00080000 - -/* flow control */ - -#define C_FL_OXX 0x00000001 /* output Xon/Xoff flow control */ -#define C_FL_IXX 0x00000002 /* output Xon/Xoff flow control */ -#define C_FL_OIXANY 0x00000004 /* output Xon/Xoff (any xon) */ -#define C_FL_SWFLOW 0x0000000f - -/* flow status */ - -#define C_FS_TXIDLE 0x00000000 /* no Tx data in the buffer or UART */ -#define C_FS_SENDING 0x00000001 /* UART is sending data */ -#define C_FS_SWFLOW 0x00000002 /* Tx is stopped by received Xoff */ - -/* rs_control/rs_status RS-232 signals */ - -#define C_RS_PARAM 0x80000000 /* Indicates presence of parameter in - IOCTLM command */ -#define C_RS_RTS 0x00000001 /* RTS */ -#define C_RS_DTR 0x00000004 /* DTR */ -#define C_RS_DCD 0x00000100 /* CD */ -#define C_RS_DSR 0x00000200 /* DSR */ -#define C_RS_RI 0x00000400 /* RI */ -#define C_RS_CTS 0x00000800 /* CTS */ - -/* commands Host <-> Board */ - -#define C_CM_RESET 0x01 /* reset/flush buffers */ -#define C_CM_IOCTL 0x02 /* re-read CH_CTRL */ -#define C_CM_IOCTLW 0x03 /* re-read CH_CTRL, intr when done */ -#define C_CM_IOCTLM 0x04 /* RS-232 outputs change */ -#define C_CM_SENDXOFF 0x10 /* send Xoff */ -#define C_CM_SENDXON 0x11 /* send Xon */ -#define C_CM_CLFLOW 0x12 /* Clear flow control (resume) */ -#define C_CM_SENDBRK 0x41 /* send break */ -#define C_CM_INTBACK 0x42 /* Interrupt back */ -#define C_CM_SET_BREAK 0x43 /* Tx break on */ -#define C_CM_CLR_BREAK 0x44 /* Tx break off */ -#define C_CM_CMD_DONE 0x45 /* Previous command done */ -#define C_CM_INTBACK2 0x46 /* Alternate Interrupt back */ -#define C_CM_TINACT 0x51 /* set inactivity detection */ -#define C_CM_IRQ_ENBL 0x52 /* enable generation of interrupts */ -#define C_CM_IRQ_DSBL 0x53 /* disable generation of interrupts */ -#define C_CM_ACK_ENBL 0x54 /* enable acknowledged interrupt mode */ -#define C_CM_ACK_DSBL 0x55 /* disable acknowledged intr mode */ -#define C_CM_FLUSH_RX 0x56 /* flushes Rx buffer */ -#define C_CM_FLUSH_TX 0x57 /* flushes Tx buffer */ -#define C_CM_Q_ENABLE 0x58 /* enables queue access from the - driver */ -#define C_CM_Q_DISABLE 0x59 /* disables queue access from the - driver */ - -#define C_CM_TXBEMPTY 0x60 /* Tx buffer is empty */ -#define C_CM_TXLOWWM 0x61 /* Tx buffer low water mark */ -#define C_CM_RXHIWM 0x62 /* Rx buffer high water mark */ -#define C_CM_RXNNDT 0x63 /* rx no new data timeout */ -#define C_CM_TXFEMPTY 0x64 -#define C_CM_ICHAR 0x65 -#define C_CM_MDCD 0x70 /* modem DCD change */ -#define C_CM_MDSR 0x71 /* modem DSR change */ -#define C_CM_MRI 0x72 /* modem RI change */ -#define C_CM_MCTS 0x73 /* modem CTS change */ -#define C_CM_MRTS 0x74 /* modem RTS drop */ -#define C_CM_RXBRK 0x84 /* Break received */ -#define C_CM_PR_ERROR 0x85 /* Parity error */ -#define C_CM_FR_ERROR 0x86 /* Frame error */ -#define C_CM_OVR_ERROR 0x87 /* Overrun error */ -#define C_CM_RXOFL 0x88 /* RX buffer overflow */ -#define C_CM_CMDERROR 0x90 /* command error */ -#define C_CM_FATAL 0x91 /* fatal error */ -#define C_CM_HW_RESET 0x92 /* reset board */ - -/* - * CH_CTRL - This per port structure contains all parameters - * that control an specific port. It can be seen as the - * configuration registers of a "super-serial-controller". - */ - -struct CH_CTRL { - __u32 op_mode; /* operation mode */ - __u32 intr_enable; /* interrupt masking */ - __u32 sw_flow; /* SW flow control */ - __u32 flow_status; /* output flow status */ - __u32 comm_baud; /* baud rate - numerically specified */ - __u32 comm_parity; /* parity */ - __u32 comm_data_l; /* data length/stop */ - __u32 comm_flags; /* other flags */ - __u32 hw_flow; /* HW flow control */ - __u32 rs_control; /* RS-232 outputs */ - __u32 rs_status; /* RS-232 inputs */ - __u32 flow_xon; /* xon char */ - __u32 flow_xoff; /* xoff char */ - __u32 hw_overflow; /* hw overflow counter */ - __u32 sw_overflow; /* sw overflow counter */ - __u32 comm_error; /* frame/parity error counter */ - __u32 ichar; - __u32 filler[7]; -}; - - -/* - * BUF_CTRL - This per channel structure contains - * all Tx and Rx buffer control for a given channel. - */ - -struct BUF_CTRL { - __u32 flag_dma; /* buffers are in Host memory */ - __u32 tx_bufaddr; /* address of the tx buffer */ - __u32 tx_bufsize; /* tx buffer size */ - __u32 tx_threshold; /* tx low water mark */ - __u32 tx_get; /* tail index tx buf */ - __u32 tx_put; /* head index tx buf */ - __u32 rx_bufaddr; /* address of the rx buffer */ - __u32 rx_bufsize; /* rx buffer size */ - __u32 rx_threshold; /* rx high water mark */ - __u32 rx_get; /* tail index rx buf */ - __u32 rx_put; /* head index rx buf */ - __u32 filler[5]; /* filler to align structures */ -}; - -/* - * BOARD_CTRL - This per board structure contains all global - * control fields related to the board. - */ - -struct BOARD_CTRL { - - /* static info provided by the on-board CPU */ - __u32 n_channel; /* number of channels */ - __u32 fw_version; /* firmware version */ - - /* static info provided by the driver */ - __u32 op_system; /* op_system id */ - __u32 dr_version; /* driver version */ - - /* board control area */ - __u32 inactivity; /* inactivity control */ - - /* host to FW commands */ - __u32 hcmd_channel; /* channel number */ - __u32 hcmd_param; /* pointer to parameters */ - - /* FW to Host commands */ - __u32 fwcmd_channel; /* channel number */ - __u32 fwcmd_param; /* pointer to parameters */ - __u32 zf_int_queue_addr; /* offset for INT_QUEUE structure */ - - /* filler so the structures are aligned */ - __u32 filler[6]; -}; - -/* Host Interrupt Queue */ - -#define QUEUE_SIZE (10*MAX_CHAN) - -struct INT_QUEUE { - unsigned char intr_code[QUEUE_SIZE]; - unsigned long channel[QUEUE_SIZE]; - unsigned long param[QUEUE_SIZE]; - unsigned long put; - unsigned long get; -}; - -/* - * ZFW_CTRL - This is the data structure that includes all other - * data structures used by the Firmware. - */ - -struct ZFW_CTRL { - struct BOARD_CTRL board_ctrl; - struct CH_CTRL ch_ctrl[MAX_CHAN]; - struct BUF_CTRL buf_ctrl[MAX_CHAN]; -}; - -/****************** ****************** *******************/ -#endif - -#endif /* _UAPI_LINUX_CYCLADES_H */ diff --git a/include/uapi/linux/dm-ioctl.h b/include/uapi/linux/dm-ioctl.h index fcff6669137b..e5c6e458bdf7 100644 --- a/include/uapi/linux/dm-ioctl.h +++ b/include/uapi/linux/dm-ioctl.h @@ -193,8 +193,22 @@ struct dm_name_list { __u32 next; /* offset to the next record from the _start_ of this */ char name[0]; + + /* + * The following members can be accessed by taking a pointer that + * points immediately after the terminating zero character in "name" + * and aligning this pointer to next 8-byte boundary. + * Uuid is present if the flag DM_NAME_LIST_FLAG_HAS_UUID is set. + * + * __u32 event_nr; + * __u32 flags; + * char uuid[0]; + */ }; +#define DM_NAME_LIST_FLAG_HAS_UUID 1 +#define DM_NAME_LIST_FLAG_DOESNT_HAVE_UUID 2 + /* * Used to retrieve the target versions */ @@ -272,9 +286,9 @@ enum { #define DM_DEV_SET_GEOMETRY _IOWR(DM_IOCTL, DM_DEV_SET_GEOMETRY_CMD, struct dm_ioctl) #define DM_VERSION_MAJOR 4 -#define DM_VERSION_MINOR 44 +#define DM_VERSION_MINOR 45 #define DM_VERSION_PATCHLEVEL 0 -#define DM_VERSION_EXTRA "-ioctl (2021-02-01)" +#define DM_VERSION_EXTRA "-ioctl (2021-03-22)" /* Status bits */ #define DM_READONLY_FLAG (1 << 0) /* In/Out */ diff --git a/include/uapi/linux/dqblk_xfs.h b/include/uapi/linux/dqblk_xfs.h index c71d909addda..8cda3e62e0e7 100644 --- a/include/uapi/linux/dqblk_xfs.h +++ b/include/uapi/linux/dqblk_xfs.h @@ -219,7 +219,10 @@ struct fs_quota_statv { __s32 qs_rtbtimelimit;/* limit for rt blks timer */ __u16 qs_bwarnlimit; /* limit for num warnings */ __u16 qs_iwarnlimit; /* limit for num warnings */ - __u64 qs_pad2[8]; /* for future proofing */ + __u16 qs_rtbwarnlimit;/* limit for rt blks warnings */ + __u16 qs_pad3; + __u32 qs_pad4; + __u64 qs_pad2[7]; /* for future proofing */ }; #endif /* _LINUX_DQBLK_XFS_H */ diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index 5afea692a3f7..f91e079e3108 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -1383,15 +1383,33 @@ struct ethtool_per_queue_op { }; /** - * struct ethtool_fecparam - Ethernet forward error correction(fec) parameters + * struct ethtool_fecparam - Ethernet Forward Error Correction parameters * @cmd: Command number = %ETHTOOL_GFECPARAM or %ETHTOOL_SFECPARAM - * @active_fec: FEC mode which is active on porte - * @fec: Bitmask of supported/configured FEC modes - * @rsvd: Reserved for future extensions. i.e FEC bypass feature. + * @active_fec: FEC mode which is active on the port, single bit set, GET only. + * @fec: Bitmask of configured FEC modes. + * @reserved: Reserved for future extensions, ignore on GET, write 0 for SET. * - * Drivers should reject a non-zero setting of @autoneg when - * autoneogotiation is disabled (or not supported) for the link. + * Note that @reserved was never validated on input and ethtool user space + * left it uninitialized when calling SET. Hence going forward it can only be + * used to return a value to userspace with GET. + * + * FEC modes supported by the device can be read via %ETHTOOL_GLINKSETTINGS. + * FEC settings are configured by link autonegotiation whenever it's enabled. + * With autoneg on %ETHTOOL_GFECPARAM can be used to read the current mode. + * + * When autoneg is disabled %ETHTOOL_SFECPARAM controls the FEC settings. + * It is recommended that drivers only accept a single bit set in @fec. + * When multiple bits are set in @fec drivers may pick mode in an implementation + * dependent way. Drivers should reject mixing %ETHTOOL_FEC_AUTO_BIT with other + * FEC modes, because it's unclear whether in this case other modes constrain + * AUTO or are independent choices. + * Drivers must reject SET requests if they support none of the requested modes. + * + * If device does not support FEC drivers may use %ETHTOOL_FEC_NONE instead + * of returning %EOPNOTSUPP from %ETHTOOL_GFECPARAM. * + * See enum ethtool_fec_config_bits for definition of valid bits for both + * @fec and @active_fec. */ struct ethtool_fecparam { __u32 cmd; @@ -1403,11 +1421,16 @@ struct ethtool_fecparam { /** * enum ethtool_fec_config_bits - flags definition of ethtool_fec_configuration - * @ETHTOOL_FEC_NONE: FEC mode configuration is not supported - * @ETHTOOL_FEC_AUTO: Default/Best FEC mode provided by driver - * @ETHTOOL_FEC_OFF: No FEC Mode - * @ETHTOOL_FEC_RS: Reed-Solomon Forward Error Detection mode - * @ETHTOOL_FEC_BASER: Base-R/Reed-Solomon Forward Error Detection mode + * @ETHTOOL_FEC_NONE_BIT: FEC mode configuration is not supported. Should not + * be used together with other bits. GET only. + * @ETHTOOL_FEC_AUTO_BIT: Select default/best FEC mode automatically, usually + * based link mode and SFP parameters read from module's + * EEPROM. This bit does _not_ mean autonegotiation. + * @ETHTOOL_FEC_OFF_BIT: No FEC Mode + * @ETHTOOL_FEC_RS_BIT: Reed-Solomon FEC Mode + * @ETHTOOL_FEC_BASER_BIT: Base-R/Reed-Solomon FEC Mode + * @ETHTOOL_FEC_LLRS_BIT: Low Latency Reed Solomon FEC Mode (25G/50G Ethernet + * Consortium) */ enum ethtool_fec_config_bits { ETHTOOL_FEC_NONE_BIT, diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h index a286635ac9b8..9612dcd48a6a 100644 --- a/include/uapi/linux/ethtool_netlink.h +++ b/include/uapi/linux/ethtool_netlink.h @@ -42,6 +42,9 @@ enum { ETHTOOL_MSG_CABLE_TEST_ACT, ETHTOOL_MSG_CABLE_TEST_TDR_ACT, ETHTOOL_MSG_TUNNEL_INFO_GET, + ETHTOOL_MSG_FEC_GET, + ETHTOOL_MSG_FEC_SET, + ETHTOOL_MSG_MODULE_EEPROM_GET, /* add new constants above here */ __ETHTOOL_MSG_USER_CNT, @@ -80,6 +83,9 @@ enum { ETHTOOL_MSG_CABLE_TEST_NTF, ETHTOOL_MSG_CABLE_TEST_TDR_NTF, ETHTOOL_MSG_TUNNEL_INFO_GET_REPLY, + ETHTOOL_MSG_FEC_GET_REPLY, + ETHTOOL_MSG_FEC_NTF, + ETHTOOL_MSG_MODULE_EEPROM_GET_REPLY, /* add new constants above here */ __ETHTOOL_MSG_KERNEL_CNT, @@ -629,6 +635,36 @@ enum { ETHTOOL_A_TUNNEL_INFO_MAX = (__ETHTOOL_A_TUNNEL_INFO_CNT - 1) }; +/* FEC */ + +enum { + ETHTOOL_A_FEC_UNSPEC, + ETHTOOL_A_FEC_HEADER, /* nest - _A_HEADER_* */ + ETHTOOL_A_FEC_MODES, /* bitset */ + ETHTOOL_A_FEC_AUTO, /* u8 */ + ETHTOOL_A_FEC_ACTIVE, /* u32 */ + + __ETHTOOL_A_FEC_CNT, + ETHTOOL_A_FEC_MAX = (__ETHTOOL_A_FEC_CNT - 1) +}; + +/* MODULE EEPROM */ + +enum { + ETHTOOL_A_MODULE_EEPROM_UNSPEC, + ETHTOOL_A_MODULE_EEPROM_HEADER, /* nest - _A_HEADER_* */ + + ETHTOOL_A_MODULE_EEPROM_OFFSET, /* u32 */ + ETHTOOL_A_MODULE_EEPROM_LENGTH, /* u32 */ + ETHTOOL_A_MODULE_EEPROM_PAGE, /* u8 */ + ETHTOOL_A_MODULE_EEPROM_BANK, /* u8 */ + ETHTOOL_A_MODULE_EEPROM_I2C_ADDRESS, /* u8 */ + ETHTOOL_A_MODULE_EEPROM_DATA, /* nested */ + + __ETHTOOL_A_MODULE_EEPROM_CNT, + ETHTOOL_A_MODULE_EEPROM_MAX = (__ETHTOOL_A_MODULE_EEPROM_CNT - 1) +}; + /* generic netlink info */ #define ETHTOOL_GENL_NAME "ethtool" #define ETHTOOL_GENL_VERSION 1 diff --git a/include/uapi/linux/icmp.h b/include/uapi/linux/icmp.h index fb169a50895e..222325d1d80e 100644 --- a/include/uapi/linux/icmp.h +++ b/include/uapi/linux/icmp.h @@ -20,6 +20,9 @@ #include <linux/types.h> #include <asm/byteorder.h> +#include <linux/in.h> +#include <linux/if.h> +#include <linux/in6.h> #define ICMP_ECHOREPLY 0 /* Echo Reply */ #define ICMP_DEST_UNREACH 3 /* Destination Unreachable */ @@ -66,6 +69,23 @@ #define ICMP_EXC_TTL 0 /* TTL count exceeded */ #define ICMP_EXC_FRAGTIME 1 /* Fragment Reass time exceeded */ +/* Codes for EXT_ECHO (PROBE) */ +#define ICMP_EXT_ECHO 42 +#define ICMP_EXT_ECHOREPLY 43 +#define ICMP_EXT_MAL_QUERY 1 /* Malformed Query */ +#define ICMP_EXT_NO_IF 2 /* No such Interface */ +#define ICMP_EXT_NO_TABLE_ENT 3 /* No such Table Entry */ +#define ICMP_EXT_MULT_IFS 4 /* Multiple Interfaces Satisfy Query */ + +/* Constants for EXT_ECHO (PROBE) */ +#define EXT_ECHOREPLY_ACTIVE (1 << 2)/* active bit in reply message */ +#define EXT_ECHOREPLY_IPV4 (1 << 1)/* ipv4 bit in reply message */ +#define EXT_ECHOREPLY_IPV6 1 /* ipv6 bit in reply message */ +#define EXT_ECHO_CTYPE_NAME 1 +#define EXT_ECHO_CTYPE_INDEX 2 +#define EXT_ECHO_CTYPE_ADDR 3 +#define ICMP_AFI_IP 1 /* Address Family Identifier for ipv4 */ +#define ICMP_AFI_IP6 2 /* Address Family Identifier for ipv6 */ struct icmphdr { __u8 type; @@ -118,4 +138,26 @@ struct icmp_extobj_hdr { __u8 class_type; }; +/* RFC 8335: 2.1 Header for c-type 3 payload */ +struct icmp_ext_echo_ctype3_hdr { + __be16 afi; + __u8 addrlen; + __u8 reserved; +}; + +/* RFC 8335: 2.1 Interface Identification Object */ +struct icmp_ext_echo_iio { + struct icmp_extobj_hdr extobj_hdr; + union { + char name[IFNAMSIZ]; + __be32 ifindex; + struct { + struct icmp_ext_echo_ctype3_hdr ctype3_hdr; + union { + struct in_addr ipv4_addr; + struct in6_addr ipv6_addr; + } ip_addr; + } addr; + } ident; +}; #endif /* _UAPI_LINUX_ICMP_H */ diff --git a/include/uapi/linux/icmpv6.h b/include/uapi/linux/icmpv6.h index 0564fd7ccde4..ecaece3af38d 100644 --- a/include/uapi/linux/icmpv6.h +++ b/include/uapi/linux/icmpv6.h @@ -140,6 +140,9 @@ struct icmp6hdr { #define ICMPV6_UNK_OPTION 2 #define ICMPV6_HDR_INCOMP 3 +/* Codes for EXT_ECHO (PROBE) */ +#define ICMPV6_EXT_ECHO_REQUEST 160 +#define ICMPV6_EXT_ECHO_REPLY 161 /* * constants for (set|get)sockopt */ diff --git a/include/uapi/linux/idxd.h b/include/uapi/linux/idxd.h index 236d437947bc..e33997b4d750 100644 --- a/include/uapi/linux/idxd.h +++ b/include/uapi/linux/idxd.h @@ -247,8 +247,8 @@ struct dsa_completion_record { uint32_t rsvd2:8; }; - uint16_t delta_rec_size; - uint16_t crc_val; + uint32_t delta_rec_size; + uint32_t crc_val; /* DIF check & strip */ struct { diff --git a/include/uapi/linux/if_fddi.h b/include/uapi/linux/if_fddi.h index 7239aa9c0766..8df2d9934bcd 100644 --- a/include/uapi/linux/if_fddi.h +++ b/include/uapi/linux/if_fddi.h @@ -9,7 +9,7 @@ * Version: @(#)if_fddi.h 1.0.3 Oct 6 2018 * * Author: Lawrence V. Stefani, <stefani@yahoo.com> - * Maintainer: Maciej W. Rozycki, <macro@linux-mips.org> + * Maintainer: Maciej W. Rozycki, <macro@orcam.me.uk> * * if_fddi.h is based on previous if_ether.h and if_tr.h work by * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> diff --git a/include/uapi/linux/iio/buffer.h b/include/uapi/linux/iio/buffer.h new file mode 100644 index 000000000000..13939032b3f6 --- /dev/null +++ b/include/uapi/linux/iio/buffer.h @@ -0,0 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* industrial I/O buffer definitions needed both in and out of kernel + */ + +#ifndef _UAPI_IIO_BUFFER_H_ +#define _UAPI_IIO_BUFFER_H_ + +#define IIO_BUFFER_GET_FD_IOCTL _IOWR('i', 0x91, int) + +#endif /* _UAPI_IIO_BUFFER_H_ */ diff --git a/include/uapi/linux/io_uring.h b/include/uapi/linux/io_uring.h index 2514eb6b1cf2..5beaa6bbc6db 100644 --- a/include/uapi/linux/io_uring.h +++ b/include/uapi/linux/io_uring.h @@ -160,6 +160,21 @@ enum { #define SPLICE_F_FD_IN_FIXED (1U << 31) /* the last bit of __u32 */ /* + * POLL_ADD flags. Note that since sqe->poll_events is the flag space, the + * command flags for POLL_ADD are stored in sqe->len. + * + * IORING_POLL_ADD_MULTI Multishot poll. Sets IORING_CQE_F_MORE if + * the poll handler will continue to report + * CQEs on behalf of the same SQE. + * + * IORING_POLL_UPDATE Update existing poll request, matching + * sqe->addr as the old user_data field. + */ +#define IORING_POLL_ADD_MULTI (1U << 0) +#define IORING_POLL_UPDATE_EVENTS (1U << 1) +#define IORING_POLL_UPDATE_USER_DATA (1U << 2) + +/* * IO completion data structure (Completion Queue Entry) */ struct io_uring_cqe { @@ -172,8 +187,10 @@ struct io_uring_cqe { * cqe->flags * * IORING_CQE_F_BUFFER If set, the upper 16 bits are the buffer ID + * IORING_CQE_F_MORE If set, parent SQE will generate more CQE entries */ #define IORING_CQE_F_BUFFER (1U << 0) +#define IORING_CQE_F_MORE (1U << 1) enum { IORING_CQE_BUFFER_SHIFT = 16, diff --git a/include/uapi/linux/iommu.h b/include/uapi/linux/iommu.h index e1d9e75f2c94..59178fc229ca 100644 --- a/include/uapi/linux/iommu.h +++ b/include/uapi/linux/iommu.h @@ -288,7 +288,8 @@ struct iommu_gpasid_bind_data_vtd { #define IOMMU_SVA_VTD_GPASID_PWT (1 << 3) /* page-level write through */ #define IOMMU_SVA_VTD_GPASID_EMTE (1 << 4) /* extended mem type enable */ #define IOMMU_SVA_VTD_GPASID_CD (1 << 5) /* PASID-level cache disable */ -#define IOMMU_SVA_VTD_GPASID_LAST (1 << 6) +#define IOMMU_SVA_VTD_GPASID_WPE (1 << 6) /* Write protect enable */ +#define IOMMU_SVA_VTD_GPASID_LAST (1 << 7) __u64 flags; __u32 pat; __u32 emt; diff --git a/include/uapi/linux/kfd_ioctl.h b/include/uapi/linux/kfd_ioctl.h index 695b606da4b1..bf5e7d7846dd 100644 --- a/include/uapi/linux/kfd_ioctl.h +++ b/include/uapi/linux/kfd_ioctl.h @@ -29,9 +29,10 @@ /* * - 1.1 - initial version * - 1.3 - Add SMI events support + * - 1.4 - Indicate new SRAM EDC bit in device properties */ #define KFD_IOCTL_MAJOR_VERSION 1 -#define KFD_IOCTL_MINOR_VERSION 3 +#define KFD_IOCTL_MINOR_VERSION 4 struct kfd_ioctl_get_version_args { __u32 major_version; /* from KFD */ @@ -351,6 +352,7 @@ struct kfd_ioctl_acquire_vm_args { #define KFD_IOC_ALLOC_MEM_FLAGS_NO_SUBSTITUTE (1 << 28) #define KFD_IOC_ALLOC_MEM_FLAGS_AQL_QUEUE_MEM (1 << 27) #define KFD_IOC_ALLOC_MEM_FLAGS_COHERENT (1 << 26) +#define KFD_IOC_ALLOC_MEM_FLAGS_UNCACHED (1 << 25) /* Allocate memory for later SVM (shared virtual memory) mapping. * diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index f6afee209620..0e0f70c0d0dc 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -1078,6 +1078,7 @@ struct kvm_ppc_resize_hpt { #define KVM_CAP_DIRTY_LOG_RING 192 #define KVM_CAP_X86_BUS_LOCK_EXIT 193 #define KVM_CAP_PPC_DAWR1 194 +#define KVM_CAP_PTP_KVM 195 #ifdef KVM_CAP_IRQ_ROUTING diff --git a/include/uapi/linux/landlock.h b/include/uapi/linux/landlock.h new file mode 100644 index 000000000000..ba946a1e40b2 --- /dev/null +++ b/include/uapi/linux/landlock.h @@ -0,0 +1,129 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Landlock - User space API + * + * Copyright © 2017-2020 Mickaël Salaün <mic@digikod.net> + * Copyright © 2018-2020 ANSSI + */ + +#ifndef _UAPI_LINUX_LANDLOCK_H +#define _UAPI_LINUX_LANDLOCK_H + +#include <linux/types.h> + +/** + * struct landlock_ruleset_attr - Ruleset definition + * + * Argument of sys_landlock_create_ruleset(). This structure can grow in + * future versions. + */ +struct landlock_ruleset_attr { + /** + * @handled_access_fs: Bitmask of actions (cf. `Filesystem flags`_) + * that is handled by this ruleset and should then be forbidden if no + * rule explicitly allow them. This is needed for backward + * compatibility reasons. + */ + __u64 handled_access_fs; +}; + +/** + * enum landlock_rule_type - Landlock rule type + * + * Argument of sys_landlock_add_rule(). + */ +enum landlock_rule_type { + /** + * @LANDLOCK_RULE_PATH_BENEATH: Type of a &struct + * landlock_path_beneath_attr . + */ + LANDLOCK_RULE_PATH_BENEATH = 1, +}; + +/** + * struct landlock_path_beneath_attr - Path hierarchy definition + * + * Argument of sys_landlock_add_rule(). + */ +struct landlock_path_beneath_attr { + /** + * @allowed_access: Bitmask of allowed actions for this file hierarchy + * (cf. `Filesystem flags`_). + */ + __u64 allowed_access; + /** + * @parent_fd: File descriptor, open with ``O_PATH``, which identifies + * the parent directory of a file hierarchy, or just a file. + */ + __s32 parent_fd; + /* + * This struct is packed to avoid trailing reserved members. + * Cf. security/landlock/syscalls.c:build_check_abi() + */ +} __attribute__((packed)); + +/** + * DOC: fs_access + * + * A set of actions on kernel objects may be defined by an attribute (e.g. + * &struct landlock_path_beneath_attr) including a bitmask of access. + * + * Filesystem flags + * ~~~~~~~~~~~~~~~~ + * + * These flags enable to restrict a sandboxed process to a set of actions on + * files and directories. Files or directories opened before the sandboxing + * are not subject to these restrictions. + * + * A file can only receive these access rights: + * + * - %LANDLOCK_ACCESS_FS_EXECUTE: Execute a file. + * - %LANDLOCK_ACCESS_FS_WRITE_FILE: Open a file with write access. + * - %LANDLOCK_ACCESS_FS_READ_FILE: Open a file with read access. + * + * A directory can receive access rights related to files or directories. The + * following access right is applied to the directory itself, and the + * directories beneath it: + * + * - %LANDLOCK_ACCESS_FS_READ_DIR: Open a directory or list its content. + * + * However, the following access rights only apply to the content of a + * directory, not the directory itself: + * + * - %LANDLOCK_ACCESS_FS_REMOVE_DIR: Remove an empty directory or rename one. + * - %LANDLOCK_ACCESS_FS_REMOVE_FILE: Unlink (or rename) a file. + * - %LANDLOCK_ACCESS_FS_MAKE_CHAR: Create (or rename or link) a character + * device. + * - %LANDLOCK_ACCESS_FS_MAKE_DIR: Create (or rename) a directory. + * - %LANDLOCK_ACCESS_FS_MAKE_REG: Create (or rename or link) a regular file. + * - %LANDLOCK_ACCESS_FS_MAKE_SOCK: Create (or rename or link) a UNIX domain + * socket. + * - %LANDLOCK_ACCESS_FS_MAKE_FIFO: Create (or rename or link) a named pipe. + * - %LANDLOCK_ACCESS_FS_MAKE_BLOCK: Create (or rename or link) a block device. + * - %LANDLOCK_ACCESS_FS_MAKE_SYM: Create (or rename or link) a symbolic link. + * + * .. warning:: + * + * It is currently not possible to restrict some file-related actions + * accessible through these syscall families: :manpage:`chdir(2)`, + * :manpage:`truncate(2)`, :manpage:`stat(2)`, :manpage:`flock(2)`, + * :manpage:`chmod(2)`, :manpage:`chown(2)`, :manpage:`setxattr(2)`, + * :manpage:`utime(2)`, :manpage:`ioctl(2)`, :manpage:`fcntl(2)`, + * :manpage:`access(2)`. + * Future Landlock evolutions will enable to restrict them. + */ +#define LANDLOCK_ACCESS_FS_EXECUTE (1ULL << 0) +#define LANDLOCK_ACCESS_FS_WRITE_FILE (1ULL << 1) +#define LANDLOCK_ACCESS_FS_READ_FILE (1ULL << 2) +#define LANDLOCK_ACCESS_FS_READ_DIR (1ULL << 3) +#define LANDLOCK_ACCESS_FS_REMOVE_DIR (1ULL << 4) +#define LANDLOCK_ACCESS_FS_REMOVE_FILE (1ULL << 5) +#define LANDLOCK_ACCESS_FS_MAKE_CHAR (1ULL << 6) +#define LANDLOCK_ACCESS_FS_MAKE_DIR (1ULL << 7) +#define LANDLOCK_ACCESS_FS_MAKE_REG (1ULL << 8) +#define LANDLOCK_ACCESS_FS_MAKE_SOCK (1ULL << 9) +#define LANDLOCK_ACCESS_FS_MAKE_FIFO (1ULL << 10) +#define LANDLOCK_ACCESS_FS_MAKE_BLOCK (1ULL << 11) +#define LANDLOCK_ACCESS_FS_MAKE_SYM (1ULL << 12) + +#endif /* _UAPI_LINUX_LANDLOCK_H */ diff --git a/include/uapi/linux/major.h b/include/uapi/linux/major.h index 7e5fa8e15c43..4e5f2b3a3d54 100644 --- a/include/uapi/linux/major.h +++ b/include/uapi/linux/major.h @@ -34,8 +34,6 @@ #define GOLDSTAR_CDROM_MAJOR 16 #define OPTICS_CDROM_MAJOR 17 #define SANYO_CDROM_MAJOR 18 -#define CYCLADES_MAJOR 19 -#define CYCLADESAUX_MAJOR 20 #define MITSUMI_X_CDROM_MAJOR 20 #define MFM_ACORN_MAJOR 21 /* ARM Linux /dev/mfm */ #define SCSI_GENERIC_MAJOR 21 diff --git a/include/uapi/linux/map_to_7segment.h b/include/uapi/linux/map_to_7segment.h index 8b02088f96e3..04c8b55812e7 100644 --- a/include/uapi/linux/map_to_7segment.h +++ b/include/uapi/linux/map_to_7segment.h @@ -1,20 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ /* * Copyright (c) 2005 Henk Vergonet <Henk.Vergonet@gmail.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef MAP_TO_7SEGMENT_H diff --git a/include/uapi/linux/mdio.h b/include/uapi/linux/mdio.h index 3f302e2523b2..bdf77dffa5a4 100644 --- a/include/uapi/linux/mdio.h +++ b/include/uapi/linux/mdio.h @@ -120,6 +120,8 @@ #define MDIO_PMA_SPEED_100 0x0020 /* 100M capable */ #define MDIO_PMA_SPEED_10 0x0040 /* 10M capable */ #define MDIO_PCS_SPEED_10P2B 0x0002 /* 10PASS-TS/2BASE-TL capable */ +#define MDIO_PCS_SPEED_2_5G 0x0040 /* 2.5G capable */ +#define MDIO_PCS_SPEED_5G 0x0080 /* 5G capable */ /* Device present registers. */ #define MDIO_DEVS_PRESENT(devad) (1 << (devad)) diff --git a/include/uapi/linux/mptcp.h b/include/uapi/linux/mptcp.h index e1172c1ffdfd..8eb3c0844bff 100644 --- a/include/uapi/linux/mptcp.h +++ b/include/uapi/linux/mptcp.h @@ -174,10 +174,21 @@ enum mptcp_event_attr { MPTCP_ATTR_FLAGS, /* u16 */ MPTCP_ATTR_TIMEOUT, /* u32 */ MPTCP_ATTR_IF_IDX, /* s32 */ + MPTCP_ATTR_RESET_REASON,/* u32 */ + MPTCP_ATTR_RESET_FLAGS, /* u32 */ __MPTCP_ATTR_AFTER_LAST }; #define MPTCP_ATTR_MAX (__MPTCP_ATTR_AFTER_LAST - 1) +/* MPTCP Reset reason codes, rfc8684 */ +#define MPTCP_RST_EUNSPEC 0 +#define MPTCP_RST_EMPTCP 1 +#define MPTCP_RST_ERESOURCE 2 +#define MPTCP_RST_EPROHIBIT 3 +#define MPTCP_RST_EWQ2BIG 4 +#define MPTCP_RST_EBADPERF 5 +#define MPTCP_RST_EMIDDLEBOX 6 + #endif /* _UAPI_MPTCP_H */ diff --git a/include/uapi/linux/nexthop.h b/include/uapi/linux/nexthop.h index 2d4a1e784cf0..d8ffa8c9ca78 100644 --- a/include/uapi/linux/nexthop.h +++ b/include/uapi/linux/nexthop.h @@ -21,7 +21,10 @@ struct nexthop_grp { }; enum { - NEXTHOP_GRP_TYPE_MPATH, /* default type if not specified */ + NEXTHOP_GRP_TYPE_MPATH, /* hash-threshold nexthop group + * default type if not specified + */ + NEXTHOP_GRP_TYPE_RES, /* resilient nexthop group */ __NEXTHOP_GRP_TYPE_MAX, }; @@ -52,8 +55,50 @@ enum { NHA_FDB, /* flag; nexthop belongs to a bridge fdb */ /* if NHA_FDB is added, OIF, BLACKHOLE, ENCAP cannot be set */ + /* nested; resilient nexthop group attributes */ + NHA_RES_GROUP, + /* nested; nexthop bucket attributes */ + NHA_RES_BUCKET, + __NHA_MAX, }; #define NHA_MAX (__NHA_MAX - 1) + +enum { + NHA_RES_GROUP_UNSPEC, + /* Pad attribute for 64-bit alignment. */ + NHA_RES_GROUP_PAD = NHA_RES_GROUP_UNSPEC, + + /* u16; number of nexthop buckets in a resilient nexthop group */ + NHA_RES_GROUP_BUCKETS, + /* clock_t as u32; nexthop bucket idle timer (per-group) */ + NHA_RES_GROUP_IDLE_TIMER, + /* clock_t as u32; nexthop unbalanced timer */ + NHA_RES_GROUP_UNBALANCED_TIMER, + /* clock_t as u64; nexthop unbalanced time */ + NHA_RES_GROUP_UNBALANCED_TIME, + + __NHA_RES_GROUP_MAX, +}; + +#define NHA_RES_GROUP_MAX (__NHA_RES_GROUP_MAX - 1) + +enum { + NHA_RES_BUCKET_UNSPEC, + /* Pad attribute for 64-bit alignment. */ + NHA_RES_BUCKET_PAD = NHA_RES_BUCKET_UNSPEC, + + /* u16; nexthop bucket index */ + NHA_RES_BUCKET_INDEX, + /* clock_t as u64; nexthop bucket idle time */ + NHA_RES_BUCKET_IDLE_TIME, + /* u32; nexthop id assigned to the nexthop bucket */ + NHA_RES_BUCKET_NH_ID, + + __NHA_RES_BUCKET_MAX, +}; + +#define NHA_RES_BUCKET_MAX (__NHA_RES_BUCKET_MAX - 1) + #endif diff --git a/include/uapi/linux/nfsd/nfsfh.h b/include/uapi/linux/nfsd/nfsfh.h index ff0ca88b1c8f..427294dd56a1 100644 --- a/include/uapi/linux/nfsd/nfsfh.h +++ b/include/uapi/linux/nfsd/nfsfh.h @@ -64,13 +64,24 @@ struct nfs_fhbase_old { * in include/linux/exportfs.h for currently registered values. */ struct nfs_fhbase_new { - __u8 fb_version; /* == 1, even => nfs_fhbase_old */ - __u8 fb_auth_type; - __u8 fb_fsid_type; - __u8 fb_fileid_type; - __u32 fb_auth[1]; -/* __u32 fb_fsid[0]; floating */ -/* __u32 fb_fileid[0]; floating */ + union { + struct { + __u8 fb_version_aux; /* == 1, even => nfs_fhbase_old */ + __u8 fb_auth_type_aux; + __u8 fb_fsid_type_aux; + __u8 fb_fileid_type_aux; + __u32 fb_auth[1]; + /* __u32 fb_fsid[0]; floating */ + /* __u32 fb_fileid[0]; floating */ + }; + struct { + __u8 fb_version; /* == 1, even => nfs_fhbase_old */ + __u8 fb_auth_type; + __u8 fb_fsid_type; + __u8 fb_fileid_type; + __u32 fb_auth_flex[]; /* flexible-array member */ + }; + }; }; struct knfsd_fh { @@ -97,7 +108,7 @@ struct knfsd_fh { #define fh_fsid_type fh_base.fh_new.fb_fsid_type #define fh_auth_type fh_base.fh_new.fb_auth_type #define fh_fileid_type fh_base.fh_new.fb_fileid_type -#define fh_fsid fh_base.fh_new.fb_auth +#define fh_fsid fh_base.fh_new.fb_auth_flex /* Do not use, provided for userspace compatiblity. */ #define fh_auth fh_base.fh_new.fb_auth diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index ac78da99fccd..18dfe744bcb5 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -655,6 +655,9 @@ * When a security association was established on an 802.1X network using * fast transition, this event should be followed by an * %NL80211_CMD_PORT_AUTHORIZED event. + * Following a %NL80211_CMD_ROAM event userspace can issue + * %NL80211_CMD_GET_SCAN in order to obtain the scan information for the + * new BSS the card/driver roamed to. * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify * userspace that a connection was dropped by the AP or due to other * reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and @@ -6295,11 +6298,13 @@ struct nl80211_vendor_cmd_info { * @NL80211_TDLS_PEER_HT: TDLS peer is HT capable. * @NL80211_TDLS_PEER_VHT: TDLS peer is VHT capable. * @NL80211_TDLS_PEER_WMM: TDLS peer is WMM capable. + * @NL80211_TDLS_PEER_HE: TDLS peer is HE capable. */ enum nl80211_tdls_peer_capability { NL80211_TDLS_PEER_HT = 1<<0, NL80211_TDLS_PEER_VHT = 1<<1, NL80211_TDLS_PEER_WMM = 1<<2, + NL80211_TDLS_PEER_HE = 1<<3, }; /** diff --git a/include/uapi/linux/perf_event.h b/include/uapi/linux/perf_event.h index ad15e40d7f5d..63971eaef127 100644 --- a/include/uapi/linux/perf_event.h +++ b/include/uapi/linux/perf_event.h @@ -1156,10 +1156,15 @@ enum perf_callchain_context { /** * PERF_RECORD_AUX::flags bits */ -#define PERF_AUX_FLAG_TRUNCATED 0x01 /* record was truncated to fit */ -#define PERF_AUX_FLAG_OVERWRITE 0x02 /* snapshot from overwrite mode */ -#define PERF_AUX_FLAG_PARTIAL 0x04 /* record contains gaps */ -#define PERF_AUX_FLAG_COLLISION 0x08 /* sample collided with another */ +#define PERF_AUX_FLAG_TRUNCATED 0x01 /* record was truncated to fit */ +#define PERF_AUX_FLAG_OVERWRITE 0x02 /* snapshot from overwrite mode */ +#define PERF_AUX_FLAG_PARTIAL 0x04 /* record contains gaps */ +#define PERF_AUX_FLAG_COLLISION 0x08 /* sample collided with another */ +#define PERF_AUX_FLAG_PMU_FORMAT_TYPE_MASK 0xff00 /* PMU specific trace format type */ + +/* CoreSight PMU AUX buffer formats */ +#define PERF_AUX_FLAG_CORESIGHT_FORMAT_CORESIGHT 0x0000 /* Default for backward compatibility */ +#define PERF_AUX_FLAG_CORESIGHT_FORMAT_RAW 0x0100 /* Raw format of the source */ #define PERF_FLAG_FD_NO_GROUP (1UL << 0) #define PERF_FLAG_FD_OUTPUT (1UL << 1) diff --git a/include/uapi/linux/pkt_cls.h b/include/uapi/linux/pkt_cls.h index 7ea59cfe1fa7..025c40fef93d 100644 --- a/include/uapi/linux/pkt_cls.h +++ b/include/uapi/linux/pkt_cls.h @@ -190,6 +190,8 @@ enum { TCA_POLICE_PAD, TCA_POLICE_RATE64, TCA_POLICE_PEAKRATE64, + TCA_POLICE_PKTRATE64, + TCA_POLICE_PKTBURST64, __TCA_POLICE_MAX #define TCA_POLICE_RESULT TCA_POLICE_RESULT }; diff --git a/include/uapi/linux/psample.h b/include/uapi/linux/psample.h index bff5032c98df..e585db5bf2d2 100644 --- a/include/uapi/linux/psample.h +++ b/include/uapi/linux/psample.h @@ -13,6 +13,13 @@ enum { PSAMPLE_ATTR_GROUP_REFCOUNT, PSAMPLE_ATTR_TUNNEL, + PSAMPLE_ATTR_PAD, + PSAMPLE_ATTR_OUT_TC, /* u16 */ + PSAMPLE_ATTR_OUT_TC_OCC, /* u64, bytes */ + PSAMPLE_ATTR_LATENCY, /* u64, nanoseconds */ + PSAMPLE_ATTR_TIMESTAMP, /* u64, nanoseconds */ + PSAMPLE_ATTR_PROTO, /* u16 */ + __PSAMPLE_ATTR_MAX }; diff --git a/include/uapi/linux/ptrace.h b/include/uapi/linux/ptrace.h index 83ee45fa634b..3747bf816f9a 100644 --- a/include/uapi/linux/ptrace.h +++ b/include/uapi/linux/ptrace.h @@ -102,6 +102,16 @@ struct ptrace_syscall_info { }; }; +#define PTRACE_GET_RSEQ_CONFIGURATION 0x420f + +struct ptrace_rseq_configuration { + __u64 rseq_abi_pointer; + __u32 rseq_abi_size; + __u32 signature; + __u32 flags; + __u32 pad; +}; + /* * These values are stored in task->ptrace_message * by tracehook_report_syscall_* to describe the current syscall-stop. diff --git a/include/uapi/linux/rkisp1-config.h b/include/uapi/linux/rkisp1-config.h index 36e3efb81b01..583ca0d9a79d 100644 --- a/include/uapi/linux/rkisp1-config.h +++ b/include/uapi/linux/rkisp1-config.h @@ -15,7 +15,7 @@ #define RKISP1_CIF_ISP_MODULE_BLS (1U << 1) /* Sensor De-gamma */ #define RKISP1_CIF_ISP_MODULE_SDG (1U << 2) -/* Histogram */ +/* Histogram statistics configuration */ #define RKISP1_CIF_ISP_MODULE_HST (1U << 3) /* Lens Shade Control */ #define RKISP1_CIF_ISP_MODULE_LSC (1U << 4) @@ -31,13 +31,13 @@ #define RKISP1_CIF_ISP_MODULE_GOC (1U << 9) /* Color Processing */ #define RKISP1_CIF_ISP_MODULE_CPROC (1U << 10) -/* Auto Focus Control */ +/* Auto Focus Control statistics configuration */ #define RKISP1_CIF_ISP_MODULE_AFC (1U << 11) -/* Auto White Balancing */ +/* Auto White Balancing statistics configuration */ #define RKISP1_CIF_ISP_MODULE_AWB (1U << 12) /* Image Effect */ #define RKISP1_CIF_ISP_MODULE_IE (1U << 13) -/* Auto Exposure Control */ +/* Auto Exposure Control statistics configuration */ #define RKISP1_CIF_ISP_MODULE_AEC (1U << 14) /* Wide Dynamic Range */ #define RKISP1_CIF_ISP_MODULE_WDR (1U << 15) @@ -411,7 +411,7 @@ struct rkisp1_cif_isp_cproc_config { }; /** - * struct rkisp1_cif_isp_awb_meas_config - Configuration used by auto white balance + * struct rkisp1_cif_isp_awb_meas_config - Configuration for the AWB statistics * * @awb_mode: the awb meas mode. From enum rkisp1_cif_isp_awb_mode_type. * @awb_wnd: white balance measurement window (in pixels) @@ -550,7 +550,7 @@ struct rkisp1_cif_isp_goc_config { }; /** - * struct rkisp1_cif_isp_hst_config - Configuration used by Histogram + * struct rkisp1_cif_isp_hst_config - Configuration for Histogram statistics * * @mode: histogram mode (from enum rkisp1_cif_isp_histogram_mode) * @histogram_predivider: process every stepsize pixel, all other pixels are @@ -575,7 +575,7 @@ struct rkisp1_cif_isp_hst_config { }; /** - * struct rkisp1_cif_isp_aec_config - Configuration used by Auto Exposure Control + * struct rkisp1_cif_isp_aec_config - Configuration for Auto Exposure statistics * * @mode: Exposure measure mode (from enum rkisp1_cif_isp_exp_meas_mode) * @autostop: stop mode (from enum rkisp1_cif_isp_exp_ctrl_autostop) @@ -588,7 +588,7 @@ struct rkisp1_cif_isp_aec_config { }; /** - * struct rkisp1_cif_isp_afc_config - Configuration used by Auto Focus Control + * struct rkisp1_cif_isp_afc_config - Configuration for the Auto Focus statistics * * @num_afm_win: max RKISP1_CIF_ISP_AFM_MAX_WINDOWS * @afm_win: coordinates of the meas window diff --git a/include/uapi/linux/rpmsg.h b/include/uapi/linux/rpmsg.h index e14c6dab4223..f5ca8740f3fb 100644 --- a/include/uapi/linux/rpmsg.h +++ b/include/uapi/linux/rpmsg.h @@ -9,11 +9,13 @@ #include <linux/ioctl.h> #include <linux/types.h> +#define RPMSG_ADDR_ANY 0xFFFFFFFF + /** * struct rpmsg_endpoint_info - endpoint info representation * @name: name of service - * @src: local address - * @dst: destination address + * @src: local address. To set to RPMSG_ADDR_ANY if not used. + * @dst: destination address. To set to RPMSG_ADDR_ANY if not used. */ struct rpmsg_endpoint_info { char name[32]; @@ -21,7 +23,14 @@ struct rpmsg_endpoint_info { __u32 dst; }; +/** + * Instantiate a new rmpsg char device endpoint. + */ #define RPMSG_CREATE_EPT_IOCTL _IOW(0xb5, 0x1, struct rpmsg_endpoint_info) + +/** + * Destroy a rpmsg char device endpoint created by the RPMSG_CREATE_EPT_IOCTL. + */ #define RPMSG_DESTROY_EPT_IOCTL _IO(0xb5, 0x2) #endif diff --git a/include/uapi/linux/rtnetlink.h b/include/uapi/linux/rtnetlink.h index 91e4ca064d61..5888492a5257 100644 --- a/include/uapi/linux/rtnetlink.h +++ b/include/uapi/linux/rtnetlink.h @@ -178,6 +178,13 @@ enum { RTM_GETVLAN, #define RTM_GETVLAN RTM_GETVLAN + RTM_NEWNEXTHOPBUCKET = 116, +#define RTM_NEWNEXTHOPBUCKET RTM_NEWNEXTHOPBUCKET + RTM_DELNEXTHOPBUCKET, +#define RTM_DELNEXTHOPBUCKET RTM_DELNEXTHOPBUCKET + RTM_GETNEXTHOPBUCKET, +#define RTM_GETNEXTHOPBUCKET RTM_GETNEXTHOPBUCKET + __RTM_MAX, #define RTM_MAX (((__RTM_MAX + 3) & ~3) - 1) }; @@ -283,6 +290,7 @@ enum { #define RTPROT_MROUTED 17 /* Multicast daemon */ #define RTPROT_KEEPALIVED 18 /* Keepalived daemon */ #define RTPROT_BABEL 42 /* Babel daemon */ +#define RTPROT_OPENR 99 /* Open Routing (Open/R) Routes */ #define RTPROT_BGP 186 /* BGP Routes */ #define RTPROT_ISIS 187 /* ISIS Routes */ #define RTPROT_OSPF 188 /* OSPF Routes */ diff --git a/include/uapi/linux/serial.h b/include/uapi/linux/serial.h index 93eb3c496ff1..fa6b16e5fdd8 100644 --- a/include/uapi/linux/serial.h +++ b/include/uapi/linux/serial.h @@ -52,11 +52,11 @@ struct serial_struct { #define PORT_16450 2 #define PORT_16550 3 #define PORT_16550A 4 -#define PORT_CIRRUS 5 /* usurped by cyclades.c */ +#define PORT_CIRRUS 5 #define PORT_16650 6 #define PORT_16650V2 7 #define PORT_16750 8 -#define PORT_STARTECH 9 /* usurped by cyclades.c */ +#define PORT_STARTECH 9 #define PORT_16C950 10 /* Oxford Semiconductor */ #define PORT_16654 11 #define PORT_16850 12 diff --git a/include/uapi/linux/surface_aggregator/dtx.h b/include/uapi/linux/surface_aggregator/dtx.h new file mode 100644 index 000000000000..0833aab0d819 --- /dev/null +++ b/include/uapi/linux/surface_aggregator/dtx.h @@ -0,0 +1,146 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * Surface DTX (clipboard detachment system driver) user-space interface. + * + * Definitions, structs, and IOCTLs for the /dev/surface/dtx misc device. This + * device allows user-space to control the clipboard detachment process on + * Surface Book series devices. + * + * Copyright (C) 2020-2021 Maximilian Luz <luzmaximilian@gmail.com> + */ + +#ifndef _UAPI_LINUX_SURFACE_AGGREGATOR_DTX_H +#define _UAPI_LINUX_SURFACE_AGGREGATOR_DTX_H + +#include <linux/ioctl.h> +#include <linux/types.h> + +/* Status/error categories */ +#define SDTX_CATEGORY_STATUS 0x0000 +#define SDTX_CATEGORY_RUNTIME_ERROR 0x1000 +#define SDTX_CATEGORY_HARDWARE_ERROR 0x2000 +#define SDTX_CATEGORY_UNKNOWN 0xf000 + +#define SDTX_CATEGORY_MASK 0xf000 +#define SDTX_CATEGORY(value) ((value) & SDTX_CATEGORY_MASK) + +#define SDTX_STATUS(code) ((code) | SDTX_CATEGORY_STATUS) +#define SDTX_ERR_RT(code) ((code) | SDTX_CATEGORY_RUNTIME_ERROR) +#define SDTX_ERR_HW(code) ((code) | SDTX_CATEGORY_HARDWARE_ERROR) +#define SDTX_UNKNOWN(code) ((code) | SDTX_CATEGORY_UNKNOWN) + +#define SDTX_SUCCESS(value) (SDTX_CATEGORY(value) == SDTX_CATEGORY_STATUS) + +/* Latch status values */ +#define SDTX_LATCH_CLOSED SDTX_STATUS(0x00) +#define SDTX_LATCH_OPENED SDTX_STATUS(0x01) + +/* Base state values */ +#define SDTX_BASE_DETACHED SDTX_STATUS(0x00) +#define SDTX_BASE_ATTACHED SDTX_STATUS(0x01) + +/* Runtime errors (non-critical) */ +#define SDTX_DETACH_NOT_FEASIBLE SDTX_ERR_RT(0x01) +#define SDTX_DETACH_TIMEDOUT SDTX_ERR_RT(0x02) + +/* Hardware errors (critical) */ +#define SDTX_ERR_FAILED_TO_OPEN SDTX_ERR_HW(0x01) +#define SDTX_ERR_FAILED_TO_REMAIN_OPEN SDTX_ERR_HW(0x02) +#define SDTX_ERR_FAILED_TO_CLOSE SDTX_ERR_HW(0x03) + +/* Base types */ +#define SDTX_DEVICE_TYPE_HID 0x0100 +#define SDTX_DEVICE_TYPE_SSH 0x0200 + +#define SDTX_DEVICE_TYPE_MASK 0x0f00 +#define SDTX_DEVICE_TYPE(value) ((value) & SDTX_DEVICE_TYPE_MASK) + +#define SDTX_BASE_TYPE_HID(id) ((id) | SDTX_DEVICE_TYPE_HID) +#define SDTX_BASE_TYPE_SSH(id) ((id) | SDTX_DEVICE_TYPE_SSH) + +/** + * enum sdtx_device_mode - Mode describing how (and if) the clipboard is + * attached to the base of the device. + * @SDTX_DEVICE_MODE_TABLET: The clipboard is detached from the base and the + * device operates as tablet. + * @SDTX_DEVICE_MODE_LAPTOP: The clipboard is attached normally to the base + * and the device operates as laptop. + * @SDTX_DEVICE_MODE_STUDIO: The clipboard is attached to the base in reverse. + * The device operates as tablet with keyboard and + * touchpad deactivated, however, the base battery + * and, if present in the specific device model, dGPU + * are available to the system. + */ +enum sdtx_device_mode { + SDTX_DEVICE_MODE_TABLET = 0x00, + SDTX_DEVICE_MODE_LAPTOP = 0x01, + SDTX_DEVICE_MODE_STUDIO = 0x02, +}; + +/** + * struct sdtx_event - Event provided by reading from the DTX device file. + * @length: Length of the event payload, in bytes. + * @code: Event code, detailing what type of event this is. + * @data: Payload of the event, containing @length bytes. + * + * See &enum sdtx_event_code for currently valid event codes. + */ +struct sdtx_event { + __u16 length; + __u16 code; + __u8 data[]; +} __attribute__((__packed__)); + +/** + * enum sdtx_event_code - Code describing the type of an event. + * @SDTX_EVENT_REQUEST: Detachment request event type. + * @SDTX_EVENT_CANCEL: Cancel detachment process event type. + * @SDTX_EVENT_BASE_CONNECTION: Base/clipboard connection change event type. + * @SDTX_EVENT_LATCH_STATUS: Latch status change event type. + * @SDTX_EVENT_DEVICE_MODE: Device mode change event type. + * + * Used in &struct sdtx_event to describe the type of the event. Further event + * codes are reserved for future use. Any event parser should be able to + * gracefully handle unknown events, i.e. by simply skipping them. + * + * Consult the DTX user-space interface documentation for details regarding + * the individual event types. + */ +enum sdtx_event_code { + SDTX_EVENT_REQUEST = 1, + SDTX_EVENT_CANCEL = 2, + SDTX_EVENT_BASE_CONNECTION = 3, + SDTX_EVENT_LATCH_STATUS = 4, + SDTX_EVENT_DEVICE_MODE = 5, +}; + +/** + * struct sdtx_base_info - Describes if and what type of base is connected. + * @state: The state of the connection. Valid values are %SDTX_BASE_DETACHED, + * %SDTX_BASE_ATTACHED, and %SDTX_DETACH_NOT_FEASIBLE (in case a base + * is attached but low clipboard battery prevents detachment). Other + * values are currently reserved. + * @base_id: The type of base connected. Zero if no base is connected. + */ +struct sdtx_base_info { + __u16 state; + __u16 base_id; +} __attribute__((__packed__)); + +/* IOCTLs */ +#define SDTX_IOCTL_EVENTS_ENABLE _IO(0xa5, 0x21) +#define SDTX_IOCTL_EVENTS_DISABLE _IO(0xa5, 0x22) + +#define SDTX_IOCTL_LATCH_LOCK _IO(0xa5, 0x23) +#define SDTX_IOCTL_LATCH_UNLOCK _IO(0xa5, 0x24) + +#define SDTX_IOCTL_LATCH_REQUEST _IO(0xa5, 0x25) +#define SDTX_IOCTL_LATCH_CONFIRM _IO(0xa5, 0x26) +#define SDTX_IOCTL_LATCH_HEARTBEAT _IO(0xa5, 0x27) +#define SDTX_IOCTL_LATCH_CANCEL _IO(0xa5, 0x28) + +#define SDTX_IOCTL_GET_BASE_INFO _IOR(0xa5, 0x29, struct sdtx_base_info) +#define SDTX_IOCTL_GET_DEVICE_MODE _IOR(0xa5, 0x2a, __u16) +#define SDTX_IOCTL_GET_LATCH_STATUS _IOR(0xa5, 0x2b, __u16) + +#endif /* _UAPI_LINUX_SURFACE_AGGREGATOR_DTX_H */ diff --git a/include/uapi/linux/thermal.h b/include/uapi/linux/thermal.h index c105054cbb57..9aa2fedfa309 100644 --- a/include/uapi/linux/thermal.h +++ b/include/uapi/linux/thermal.h @@ -60,7 +60,7 @@ enum thermal_genl_event { THERMAL_GENL_EVENT_UNSPEC, THERMAL_GENL_EVENT_TZ_CREATE, /* Thermal zone creation */ THERMAL_GENL_EVENT_TZ_DELETE, /* Thermal zone deletion */ - THERMAL_GENL_EVENT_TZ_DISABLE, /* Thermal zone disabed */ + THERMAL_GENL_EVENT_TZ_DISABLE, /* Thermal zone disabled */ THERMAL_GENL_EVENT_TZ_ENABLE, /* Thermal zone enabled */ THERMAL_GENL_EVENT_TZ_TRIP_UP, /* Trip point crossed the way up */ THERMAL_GENL_EVENT_TZ_TRIP_DOWN, /* Trip point crossed the way down */ diff --git a/include/uapi/linux/tty_flags.h b/include/uapi/linux/tty_flags.h index 900a32e63424..cf25056d4b27 100644 --- a/include/uapi/linux/tty_flags.h +++ b/include/uapi/linux/tty_flags.h @@ -39,7 +39,7 @@ * WARNING: These flags are no longer used and have been superceded by the * TTY_PORT_ flags in the iflags field (and not userspace-visible) */ -#ifndef _KERNEL_ +#ifndef __KERNEL__ #define ASYNCB_INITIALIZED 31 /* Serial port was initialized */ #define ASYNCB_SUSPENDED 30 /* Serial port is suspended */ #define ASYNCB_NORMAL_ACTIVE 29 /* Normal device is active */ @@ -73,15 +73,15 @@ #define ASYNC_MAGIC_MULTIPLIER (1U << ASYNCB_MAGIC_MULTIPLIER) #define ASYNC_FLAGS ((1U << (ASYNCB_LAST_USER + 1)) - 1) -#define ASYNC_DEPRECATED (ASYNC_SESSION_LOCKOUT | ASYNC_PGRP_LOCKOUT | \ - ASYNC_CALLOUT_NOHUP | ASYNC_AUTOPROBE) +#define ASYNC_DEPRECATED (ASYNC_SPLIT_TERMIOS | ASYNC_SESSION_LOCKOUT | \ + ASYNC_PGRP_LOCKOUT | ASYNC_CALLOUT_NOHUP | ASYNC_AUTOPROBE) #define ASYNC_USR_MASK (ASYNC_SPD_MASK|ASYNC_CALLOUT_NOHUP| \ ASYNC_LOW_LATENCY) #define ASYNC_SPD_CUST (ASYNC_SPD_HI|ASYNC_SPD_VHI) #define ASYNC_SPD_WARP (ASYNC_SPD_HI|ASYNC_SPD_SHI) #define ASYNC_SPD_MASK (ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI) -#ifndef _KERNEL_ +#ifndef __KERNEL__ /* These flags are no longer used (and were always masked from userspace) */ #define ASYNC_INITIALIZED (1U << ASYNCB_INITIALIZED) #define ASYNC_NORMAL_ACTIVE (1U << ASYNCB_NORMAL_ACTIVE) diff --git a/include/uapi/linux/usb/video.h b/include/uapi/linux/usb/video.h index d854cb19c42c..bfdae12cdacf 100644 --- a/include/uapi/linux/usb/video.h +++ b/include/uapi/linux/usb/video.h @@ -302,9 +302,10 @@ struct uvc_processing_unit_descriptor { __u8 bControlSize; __u8 bmControls[2]; __u8 iProcessing; + __u8 bmVideoStandards; } __attribute__((__packed__)); -#define UVC_DT_PROCESSING_UNIT_SIZE(n) (9+(n)) +#define UVC_DT_PROCESSING_UNIT_SIZE(n) (10+(n)) /* 3.7.2.6. Extension Unit Descriptor */ struct uvc_extension_unit_descriptor { diff --git a/include/uapi/linux/uvcvideo.h b/include/uapi/linux/uvcvideo.h index f80f05b3c423..8288137387c0 100644 --- a/include/uapi/linux/uvcvideo.h +++ b/include/uapi/linux/uvcvideo.h @@ -76,11 +76,11 @@ struct uvc_xu_control_query { /** * struct uvc_meta_buf - metadata buffer building block - * @ns - system timestamp of the payload in nanoseconds - * @sof - USB Frame Number - * @length - length of the payload header - * @flags - payload header flags - * @buf - optional device-specific header data + * @ns: system timestamp of the payload in nanoseconds + * @sof: USB Frame Number + * @length: length of the payload header + * @flags: payload header flags + * @buf: optional device-specific header data * * UVC metadata nodes fill buffers with possibly multiple instances of this * struct. The first two fields are added by the driver, they can be used for diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h index 039c0d7add1b..d43bec5f1afd 100644 --- a/include/uapi/linux/v4l2-controls.h +++ b/include/uapi/linux/v4l2-controls.h @@ -66,6 +66,7 @@ #define V4L2_CTRL_CLASS_RF_TUNER 0x00a20000 /* RF tuner controls */ #define V4L2_CTRL_CLASS_DETECT 0x00a30000 /* Detection controls */ #define V4L2_CTRL_CLASS_CODEC_STATELESS 0x00a40000 /* Stateless codecs controls */ +#define V4L2_CTRL_CLASS_COLORIMETRY 0x00a50000 /* Colorimetry controls */ /* User-class control IDs */ @@ -428,6 +429,11 @@ enum v4l2_mpeg_video_multi_slice_mode { #define V4L2_CID_MPEG_VIDEO_MV_V_SEARCH_RANGE (V4L2_CID_CODEC_BASE+228) #define V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME (V4L2_CID_CODEC_BASE+229) #define V4L2_CID_MPEG_VIDEO_BASELAYER_PRIORITY_ID (V4L2_CID_CODEC_BASE+230) +#define V4L2_CID_MPEG_VIDEO_AU_DELIMITER (V4L2_CID_CODEC_BASE+231) +#define V4L2_CID_MPEG_VIDEO_LTR_COUNT (V4L2_CID_CODEC_BASE+232) +#define V4L2_CID_MPEG_VIDEO_FRAME_LTR_INDEX (V4L2_CID_CODEC_BASE+233) +#define V4L2_CID_MPEG_VIDEO_USE_LTR_FRAMES (V4L2_CID_CODEC_BASE+234) +#define V4L2_CID_MPEG_VIDEO_DEC_CONCEAL_COLOR (V4L2_CID_CODEC_BASE+235) /* CIDs for the MPEG-2 Part 2 (H.262) codec */ #define V4L2_CID_MPEG_VIDEO_MPEG2_LEVEL (V4L2_CID_CODEC_BASE+270) @@ -797,6 +803,9 @@ enum v4l2_mpeg_video_frame_skip_mode { #define V4L2_CID_MPEG_VIDEO_HEVC_B_FRAME_MIN_QP (V4L2_CID_CODEC_BASE + 651) #define V4L2_CID_MPEG_VIDEO_HEVC_B_FRAME_MAX_QP (V4L2_CID_CODEC_BASE + 652) +#define V4L2_CID_MPEG_VIDEO_DEC_DISPLAY_DELAY (V4L2_CID_CODEC_BASE + 653) +#define V4L2_CID_MPEG_VIDEO_DEC_DISPLAY_DELAY_ENABLE (V4L2_CID_CODEC_BASE + 654) + /* MPEG-class control IDs specific to the CX2341x driver as defined by V4L2 */ #define V4L2_CID_CODEC_CX2341X_BASE (V4L2_CTRL_CLASS_CODEC | 0x1000) #define V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE (V4L2_CID_CODEC_CX2341X_BASE+0) @@ -1329,7 +1338,7 @@ struct v4l2_ctrl_h264_sps { * struct v4l2_ctrl_h264_pps - H264 picture parameter set * * Except where noted, all the members on this picture parameter set - * structure match the sequence parameter set syntax as specified + * structure match the picture parameter set syntax as specified * by the H264 specification. * * In particular, V4L2_H264_PPS_FLAG_SCALING_MATRIX_PRESENT flag @@ -1657,6 +1666,236 @@ struct v4l2_ctrl_fwht_params { __u32 quantization; }; +/* Stateless VP8 control */ + +#define V4L2_VP8_SEGMENT_FLAG_ENABLED 0x01 +#define V4L2_VP8_SEGMENT_FLAG_UPDATE_MAP 0x02 +#define V4L2_VP8_SEGMENT_FLAG_UPDATE_FEATURE_DATA 0x04 +#define V4L2_VP8_SEGMENT_FLAG_DELTA_VALUE_MODE 0x08 + +/** + * struct v4l2_vp8_segment - VP8 segment-based adjustments parameters + * + * @quant_update: update values for the segment quantizer. + * @lf_update: update values for the loop filter level. + * @segment_probs: branch probabilities of the segment_id decoding tree. + * @padding: padding field. Should be zeroed by applications. + * @flags: see V4L2_VP8_SEGMENT_FLAG_{}. + * + * This structure contains segment-based adjustments related parameters. + * See the 'update_segmentation()' part of the frame header syntax, + * and section '9.3. Segment-Based Adjustments' of the VP8 specification + * for more details. + */ +struct v4l2_vp8_segment { + __s8 quant_update[4]; + __s8 lf_update[4]; + __u8 segment_probs[3]; + __u8 padding; + __u32 flags; +}; + +#define V4L2_VP8_LF_ADJ_ENABLE 0x01 +#define V4L2_VP8_LF_DELTA_UPDATE 0x02 +#define V4L2_VP8_LF_FILTER_TYPE_SIMPLE 0x04 + +/** + * struct v4l2_vp8_loop_filter - VP8 loop filter parameters + * + * @ref_frm_delta: Reference frame signed delta values. + * @mb_mode_delta: MB prediction mode signed delta values. + * @sharpness_level: matches sharpness_level syntax element. + * @level: matches loop_filter_level syntax element. + * @padding: padding field. Should be zeroed by applications. + * @flags: see V4L2_VP8_LF_FLAG_{}. + * + * This structure contains loop filter related parameters. + * See the 'mb_lf_adjustments()' part of the frame header syntax, + * and section '9.4. Loop Filter Type and Levels' of the VP8 specification + * for more details. + */ +struct v4l2_vp8_loop_filter { + __s8 ref_frm_delta[4]; + __s8 mb_mode_delta[4]; + __u8 sharpness_level; + __u8 level; + __u16 padding; + __u32 flags; +}; + +/** + * struct v4l2_vp8_quantization - VP8 quantizattion indices + * + * @y_ac_qi: luma AC coefficient table index. + * @y_dc_delta: luma DC delta vaue. + * @y2_dc_delta: y2 block DC delta value. + * @y2_ac_delta: y2 block AC delta value. + * @uv_dc_delta: chroma DC delta value. + * @uv_ac_delta: chroma AC delta value. + * @padding: padding field. Should be zeroed by applications. + * + * This structure contains the quantization indices present + * in 'quant_indices()' part of the frame header syntax. + * See section '9.6. Dequantization Indices' of the VP8 specification + * for more details. + */ +struct v4l2_vp8_quantization { + __u8 y_ac_qi; + __s8 y_dc_delta; + __s8 y2_dc_delta; + __s8 y2_ac_delta; + __s8 uv_dc_delta; + __s8 uv_ac_delta; + __u16 padding; +}; + +#define V4L2_VP8_COEFF_PROB_CNT 11 +#define V4L2_VP8_MV_PROB_CNT 19 + +/** + * struct v4l2_vp8_entropy - VP8 update probabilities + * + * @coeff_probs: coefficient probability update values. + * @y_mode_probs: luma intra-prediction probabilities. + * @uv_mode_probs: chroma intra-prediction probabilities. + * @mv_probs: mv decoding probability. + * @padding: padding field. Should be zeroed by applications. + * + * This structure contains the update probabilities present in + * 'token_prob_update()' and 'mv_prob_update()' part of the frame header. + * See section '17.2. Probability Updates' of the VP8 specification + * for more details. + */ +struct v4l2_vp8_entropy { + __u8 coeff_probs[4][8][3][V4L2_VP8_COEFF_PROB_CNT]; + __u8 y_mode_probs[4]; + __u8 uv_mode_probs[3]; + __u8 mv_probs[2][V4L2_VP8_MV_PROB_CNT]; + __u8 padding[3]; +}; + +/** + * struct v4l2_vp8_entropy_coder_state - VP8 boolean coder state + * + * @range: coder state value for "Range" + * @value: coder state value for "Value" + * @bit_count: number of bits left in range "Value". + * @padding: padding field. Should be zeroed by applications. + * + * This structure contains the state for the boolean coder, as + * explained in section '7. Boolean Entropy Decoder' of the VP8 specification. + */ +struct v4l2_vp8_entropy_coder_state { + __u8 range; + __u8 value; + __u8 bit_count; + __u8 padding; +}; + +#define V4L2_VP8_FRAME_FLAG_KEY_FRAME 0x01 +#define V4L2_VP8_FRAME_FLAG_EXPERIMENTAL 0x02 +#define V4L2_VP8_FRAME_FLAG_SHOW_FRAME 0x04 +#define V4L2_VP8_FRAME_FLAG_MB_NO_SKIP_COEFF 0x08 +#define V4L2_VP8_FRAME_FLAG_SIGN_BIAS_GOLDEN 0x10 +#define V4L2_VP8_FRAME_FLAG_SIGN_BIAS_ALT 0x20 + +#define V4L2_VP8_FRAME_IS_KEY_FRAME(hdr) \ + (!!((hdr)->flags & V4L2_VP8_FRAME_FLAG_KEY_FRAME)) + +#define V4L2_CID_STATELESS_VP8_FRAME (V4L2_CID_CODEC_STATELESS_BASE + 200) +/** + * struct v4l2_ctrl_vp8_frame - VP8 frame parameters + * + * @segment: segmentation parameters. See &v4l2_vp8_segment for more details + * @lf: loop filter parameters. See &v4l2_vp8_loop_filter for more details + * @quant: quantization parameters. See &v4l2_vp8_quantization for more details + * @entropy: update probabilities. See &v4l2_vp8_entropy for more details + * @coder_state: boolean coder state. See &v4l2_vp8_entropy_coder_state for more details + * @width: frame width. + * @height: frame height. + * @horizontal_scale: horizontal scaling factor. + * @vertical_scale: vertical scaling factor. + * @version: bitstream version. + * @prob_skip_false: frame header syntax element. + * @prob_intra: frame header syntax element. + * @prob_last: frame header syntax element. + * @prob_gf: frame header syntax element. + * @num_dct_parts: number of DCT coefficients partitions. + * @first_part_size: size of the first partition, i.e. the control partition. + * @first_part_header_bits: size in bits of the first partition header portion. + * @dct_part_sizes: DCT coefficients sizes. + * @last_frame_ts: "last" reference buffer timestamp. + * The timestamp refers to the timestamp field in struct v4l2_buffer. + * Use v4l2_timeval_to_ns() to convert the struct timeval to a __u64. + * @golden_frame_ts: "golden" reference buffer timestamp. + * @alt_frame_ts: "alt" reference buffer timestamp. + * @flags: see V4L2_VP8_FRAME_FLAG_{}. + */ +struct v4l2_ctrl_vp8_frame { + struct v4l2_vp8_segment segment; + struct v4l2_vp8_loop_filter lf; + struct v4l2_vp8_quantization quant; + struct v4l2_vp8_entropy entropy; + struct v4l2_vp8_entropy_coder_state coder_state; + + __u16 width; + __u16 height; + + __u8 horizontal_scale; + __u8 vertical_scale; + + __u8 version; + __u8 prob_skip_false; + __u8 prob_intra; + __u8 prob_last; + __u8 prob_gf; + __u8 num_dct_parts; + + __u32 first_part_size; + __u32 first_part_header_bits; + __u32 dct_part_sizes[8]; + + __u64 last_frame_ts; + __u64 golden_frame_ts; + __u64 alt_frame_ts; + + __u64 flags; +}; + +#define V4L2_CID_COLORIMETRY_CLASS_BASE (V4L2_CTRL_CLASS_COLORIMETRY | 0x900) +#define V4L2_CID_COLORIMETRY_CLASS (V4L2_CTRL_CLASS_COLORIMETRY | 1) + +#define V4L2_CID_COLORIMETRY_HDR10_CLL_INFO (V4L2_CID_COLORIMETRY_CLASS_BASE + 0) + +struct v4l2_ctrl_hdr10_cll_info { + __u16 max_content_light_level; + __u16 max_pic_average_light_level; +}; + +#define V4L2_CID_COLORIMETRY_HDR10_MASTERING_DISPLAY (V4L2_CID_COLORIMETRY_CLASS_BASE + 1) + +#define V4L2_HDR10_MASTERING_PRIMARIES_X_LOW 5 +#define V4L2_HDR10_MASTERING_PRIMARIES_X_HIGH 37000 +#define V4L2_HDR10_MASTERING_PRIMARIES_Y_LOW 5 +#define V4L2_HDR10_MASTERING_PRIMARIES_Y_HIGH 42000 +#define V4L2_HDR10_MASTERING_WHITE_POINT_X_LOW 5 +#define V4L2_HDR10_MASTERING_WHITE_POINT_X_HIGH 37000 +#define V4L2_HDR10_MASTERING_WHITE_POINT_Y_LOW 5 +#define V4L2_HDR10_MASTERING_WHITE_POINT_Y_HIGH 42000 +#define V4L2_HDR10_MASTERING_MAX_LUMA_LOW 50000 +#define V4L2_HDR10_MASTERING_MAX_LUMA_HIGH 100000000 +#define V4L2_HDR10_MASTERING_MIN_LUMA_LOW 1 +#define V4L2_HDR10_MASTERING_MIN_LUMA_HIGH 50000 + +struct v4l2_ctrl_hdr10_mastering_display { + __u16 display_primaries_x[3]; + __u16 display_primaries_y[3]; + __u16 white_point_x; + __u16 white_point_y; + __u32 max_display_mastering_luminance; + __u32 min_display_mastering_luminance; +}; + /* MPEG-compression definitions kept for backwards compatibility */ #ifndef __KERNEL__ #define V4L2_CTRL_CLASS_MPEG V4L2_CTRL_CLASS_CODEC diff --git a/include/uapi/linux/v4l2-subdev.h b/include/uapi/linux/v4l2-subdev.h index a38454d9e0f5..658106f5b5dc 100644 --- a/include/uapi/linux/v4l2-subdev.h +++ b/include/uapi/linux/v4l2-subdev.h @@ -44,6 +44,7 @@ enum v4l2_subdev_format_whence { * @which: format type (from enum v4l2_subdev_format_whence) * @pad: pad number, as reported by the media API * @format: media bus format (format code and frame size) + * @reserved: drivers and applications must zero this array */ struct v4l2_subdev_format { __u32 which; @@ -57,6 +58,7 @@ struct v4l2_subdev_format { * @which: format type (from enum v4l2_subdev_format_whence) * @pad: pad number, as reported by the media API * @rect: pad crop rectangle boundaries + * @reserved: drivers and applications must zero this array */ struct v4l2_subdev_crop { __u32 which; @@ -78,6 +80,7 @@ struct v4l2_subdev_crop { * @code: format code (MEDIA_BUS_FMT_ definitions) * @which: format type (from enum v4l2_subdev_format_whence) * @flags: flags set by the driver, (V4L2_SUBDEV_MBUS_CODE_*) + * @reserved: drivers and applications must zero this array */ struct v4l2_subdev_mbus_code_enum { __u32 pad; @@ -90,10 +93,15 @@ struct v4l2_subdev_mbus_code_enum { /** * struct v4l2_subdev_frame_size_enum - Media bus format enumeration - * @pad: pad number, as reported by the media API * @index: format index during enumeration + * @pad: pad number, as reported by the media API * @code: format code (MEDIA_BUS_FMT_ definitions) + * @min_width: minimum frame width, in pixels + * @max_width: maximum frame width, in pixels + * @min_height: minimum frame height, in pixels + * @max_height: maximum frame height, in pixels * @which: format type (from enum v4l2_subdev_format_whence) + * @reserved: drivers and applications must zero this array */ struct v4l2_subdev_frame_size_enum { __u32 index; @@ -111,6 +119,7 @@ struct v4l2_subdev_frame_size_enum { * struct v4l2_subdev_frame_interval - Pad-level frame rate * @pad: pad number, as reported by the media API * @interval: frame interval in seconds + * @reserved: drivers and applications must zero this array */ struct v4l2_subdev_frame_interval { __u32 pad; @@ -127,6 +136,7 @@ struct v4l2_subdev_frame_interval { * @height: frame height in pixels * @interval: frame interval in seconds * @which: format type (from enum v4l2_subdev_format_whence) + * @reserved: drivers and applications must zero this array */ struct v4l2_subdev_frame_interval_enum { __u32 index; diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h index 8ce36c1d53ca..34b1f53a3901 100644 --- a/include/uapi/linux/vfio.h +++ b/include/uapi/linux/vfio.h @@ -333,17 +333,10 @@ struct vfio_region_info_cap_type { #define VFIO_REGION_SUBTYPE_INTEL_IGD_LPC_CFG (3) /* 10de vendor PCI sub-types */ -/* - * NVIDIA GPU NVlink2 RAM is coherent RAM mapped onto the host address space. - */ -#define VFIO_REGION_SUBTYPE_NVIDIA_NVLINK2_RAM (1) +/* subtype 1 was VFIO_REGION_SUBTYPE_NVIDIA_NVLINK2_RAM, don't use */ /* 1014 vendor PCI sub-types */ -/* - * IBM NPU NVlink2 ATSD (Address Translation Shootdown) register of NPU - * to do TLB invalidation on a GPU. - */ -#define VFIO_REGION_SUBTYPE_IBM_NVLINK2_ATSD (1) +/* subtype 1 was VFIO_REGION_SUBTYPE_IBM_NVLINK2_ATSD, don't use */ /* sub-types for VFIO_REGION_TYPE_GFX */ #define VFIO_REGION_SUBTYPE_GFX_EDID (1) @@ -637,32 +630,9 @@ struct vfio_device_migration_info { */ #define VFIO_REGION_INFO_CAP_MSIX_MAPPABLE 3 -/* - * Capability with compressed real address (aka SSA - small system address) - * where GPU RAM is mapped on a system bus. Used by a GPU for DMA routing - * and by the userspace to associate a NVLink bridge with a GPU. - */ -#define VFIO_REGION_INFO_CAP_NVLINK2_SSATGT 4 - -struct vfio_region_info_cap_nvlink2_ssatgt { - struct vfio_info_cap_header header; - __u64 tgt; -}; +/* subtype 4 was VFIO_REGION_INFO_CAP_NVLINK2_SSATGT, don't use */ -/* - * Capability with an NVLink link speed. The value is read by - * the NVlink2 bridge driver from the bridge's "ibm,nvlink-speed" - * property in the device tree. The value is fixed in the hardware - * and failing to provide the correct value results in the link - * not working with no indication from the driver why. - */ -#define VFIO_REGION_INFO_CAP_NVLINK2_LNKSPD 5 - -struct vfio_region_info_cap_nvlink2_lnkspd { - struct vfio_info_cap_header header; - __u32 link_speed; - __u32 __pad; -}; +/* subtype 5 was VFIO_REGION_INFO_CAP_NVLINK2_LNKSPD, don't use */ /** * VFIO_DEVICE_GET_IRQ_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 9, diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h index 79dbde3bcf8d..311a01cc5775 100644 --- a/include/uapi/linux/videodev2.h +++ b/include/uapi/linux/videodev2.h @@ -586,6 +586,7 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_YUV444 v4l2_fourcc('Y', '4', '4', '4') /* 16 xxxxyyyy uuuuvvvv */ #define V4L2_PIX_FMT_YUV555 v4l2_fourcc('Y', 'U', 'V', 'O') /* 16 YUV-5-5-5 */ #define V4L2_PIX_FMT_YUV565 v4l2_fourcc('Y', 'U', 'V', 'P') /* 16 YUV-5-6-5 */ +#define V4L2_PIX_FMT_YUV24 v4l2_fourcc('Y', 'U', 'V', '3') /* 24 YUV-8-8-8 */ #define V4L2_PIX_FMT_YUV32 v4l2_fourcc('Y', 'U', 'V', '4') /* 32 YUV-8-8-8-8 */ #define V4L2_PIX_FMT_AYUV32 v4l2_fourcc('A', 'Y', 'U', 'V') /* 32 AYUV-8-8-8-8 */ #define V4L2_PIX_FMT_XYUV32 v4l2_fourcc('X', 'Y', 'U', 'V') /* 32 XYUV-8-8-8-8 */ @@ -694,6 +695,7 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_VC1_ANNEX_G v4l2_fourcc('V', 'C', '1', 'G') /* SMPTE 421M Annex G compliant stream */ #define V4L2_PIX_FMT_VC1_ANNEX_L v4l2_fourcc('V', 'C', '1', 'L') /* SMPTE 421M Annex L compliant stream */ #define V4L2_PIX_FMT_VP8 v4l2_fourcc('V', 'P', '8', '0') /* VP8 */ +#define V4L2_PIX_FMT_VP8_FRAME v4l2_fourcc('V', 'P', '8', 'F') /* VP8 parsed frame */ #define V4L2_PIX_FMT_VP9 v4l2_fourcc('V', 'P', '9', '0') /* VP9 */ #define V4L2_PIX_FMT_HEVC v4l2_fourcc('H', 'E', 'V', 'C') /* HEVC aka H.265 */ #define V4L2_PIX_FMT_FWHT v4l2_fourcc('F', 'W', 'H', 'T') /* Fast Walsh Hadamard Transform (vicodec) */ @@ -975,8 +977,10 @@ struct v4l2_requestbuffers { * pointing to this plane * @fd: when memory is V4L2_MEMORY_DMABUF, a userspace file * descriptor associated with this plane + * @m: union of @mem_offset, @userptr and @fd * @data_offset: offset in the plane to the start of data; usually 0, * unless there is a header in front of the data + * @reserved: drivers and applications must zero this array * * Multi-planar buffers consist of one or more planes, e.g. an YCbCr buffer * with two planes can have one plane for Y, and another for interleaved CbCr @@ -1018,10 +1022,14 @@ struct v4l2_plane { * a userspace file descriptor associated with this buffer * @planes: for multiplanar buffers; userspace pointer to the array of plane * info structs for this buffer + * @m: union of @offset, @userptr, @planes and @fd * @length: size in bytes of the buffer (NOT its payload) for single-plane * buffers (when type != *_MPLANE); number of elements in the * planes array for multi-plane buffers + * @reserved2: drivers and applications must zero this field * @request_fd: fd of the request that this buffer should use + * @reserved: for backwards compatibility with applications that do not know + * about @request_fd * * Contains data exchanged by application and driver using one of the Streaming * I/O methods. @@ -1059,7 +1067,7 @@ struct v4l2_buffer { #ifndef __KERNEL__ /** * v4l2_timeval_to_ns - Convert timeval to nanoseconds - * @ts: pointer to the timeval variable to be converted + * @tv: pointer to the timeval variable to be converted * * Returns the scalar nanosecond representation of the timeval * parameter. @@ -1120,6 +1128,7 @@ static inline __u64 v4l2_timeval_to_ns(const struct timeval *tv) * @flags: flags for newly created file, currently only O_CLOEXEC is * supported, refer to manual of open syscall for more details * @fd: file descriptor associated with DMABUF (set by driver) + * @reserved: drivers and applications must zero this array * * Contains data used for exporting a video buffer as DMABUF file descriptor. * The buffer is identified by a 'cookie' returned by VIDIOC_QUERYBUF @@ -1737,6 +1746,7 @@ struct v4l2_ext_control { struct v4l2_ctrl_h264_slice_params __user *p_h264_slice_params; struct v4l2_ctrl_h264_decode_params __user *p_h264_decode_params; struct v4l2_ctrl_fwht_params __user *p_fwht_params; + struct v4l2_ctrl_vp8_frame __user *p_vp8_frame; void __user *ptr; }; } __attribute__ ((packed)); @@ -1784,6 +1794,9 @@ enum v4l2_ctrl_type { V4L2_CTRL_TYPE_U32 = 0x0102, V4L2_CTRL_TYPE_AREA = 0x0106, + V4L2_CTRL_TYPE_HDR10_CLL_INFO = 0x0110, + V4L2_CTRL_TYPE_HDR10_MASTERING_DISPLAY = 0x0111, + V4L2_CTRL_TYPE_H264_SPS = 0x0200, V4L2_CTRL_TYPE_H264_PPS = 0x0201, V4L2_CTRL_TYPE_H264_SCALING_MATRIX = 0x0202, @@ -1792,6 +1805,8 @@ enum v4l2_ctrl_type { V4L2_CTRL_TYPE_H264_PRED_WEIGHTS = 0x0205, V4L2_CTRL_TYPE_FWHT_PARAMS = 0x0220, + + V4L2_CTRL_TYPE_VP8_FRAME = 0x0240, }; /* Used in the VIDIOC_QUERYCTRL ioctl for querying controls */ @@ -2229,6 +2244,7 @@ struct v4l2_mpeg_vbi_fmt_ivtv { * this plane will be used * @bytesperline: distance in bytes between the leftmost pixels in two * adjacent lines + * @reserved: drivers and applications must zero this array */ struct v4l2_plane_pix_format { __u32 sizeimage; @@ -2247,8 +2263,10 @@ struct v4l2_plane_pix_format { * @num_planes: number of planes for this format * @flags: format flags (V4L2_PIX_FMT_FLAG_*) * @ycbcr_enc: enum v4l2_ycbcr_encoding, Y'CbCr encoding + * @hsv_enc: enum v4l2_hsv_encoding, HSV encoding * @quantization: enum v4l2_quantization, colorspace quantization * @xfer_func: enum v4l2_xfer_func, colorspace transfer function + * @reserved: drivers and applications must zero this array */ struct v4l2_pix_format_mplane { __u32 width; @@ -2273,6 +2291,7 @@ struct v4l2_pix_format_mplane { * struct v4l2_sdr_format - SDR format definition * @pixelformat: little endian four character code (fourcc) * @buffersize: maximum size in bytes required for data + * @reserved: drivers and applications must zero this array */ struct v4l2_sdr_format { __u32 pixelformat; @@ -2299,6 +2318,8 @@ struct v4l2_meta_format { * @vbi: raw VBI capture or output parameters * @sliced: sliced VBI capture or output parameters * @raw_data: placeholder for future extensions and custom formats + * @fmt: union of @pix, @pix_mp, @win, @vbi, @sliced, @sdr, @meta + * and @raw_data */ struct v4l2_format { __u32 type; diff --git a/include/uapi/linux/virtio_blk.h b/include/uapi/linux/virtio_blk.h index d888f013d9ff..bbd3978b9d08 100644 --- a/include/uapi/linux/virtio_blk.h +++ b/include/uapi/linux/virtio_blk.h @@ -40,6 +40,7 @@ #define VIRTIO_BLK_F_MQ 12 /* support more than one vq */ #define VIRTIO_BLK_F_DISCARD 13 /* DISCARD is supported */ #define VIRTIO_BLK_F_WRITE_ZEROES 14 /* WRITE ZEROES is supported */ +#define VIRTIO_BLK_F_LIFETIME 15 /* LIFETIME is supported */ /* Legacy feature bits */ #ifndef VIRTIO_BLK_NO_LEGACY @@ -149,6 +150,9 @@ struct virtio_blk_config { /* Get device ID command */ #define VIRTIO_BLK_T_GET_ID 8 +/* Get device lifetime command */ +#define VIRTIO_BLK_T_GET_LIFETIME 10 + /* Discard command */ #define VIRTIO_BLK_T_DISCARD 11 @@ -196,6 +200,13 @@ struct virtio_scsi_inhdr { }; #endif /* !VIRTIO_BLK_NO_LEGACY */ +/* Lifetime information for virtio_blk device */ +struct virtio_blk_lifetime { + __le16 pre_eol_info; + __le16 device_life_time_est_typ_a; + __le16 device_life_time_est_typ_b; +}; + /* And this is the final byte of the write scatter-gather list. */ #define VIRTIO_BLK_S_OK 0 #define VIRTIO_BLK_S_IOERR 1 diff --git a/include/uapi/linux/virtio_bt.h b/include/uapi/linux/virtio_bt.h new file mode 100644 index 000000000000..a7bd48daa9a9 --- /dev/null +++ b/include/uapi/linux/virtio_bt.h @@ -0,0 +1,31 @@ +/* SPDX-License-Identifier: BSD-3-Clause */ + +#ifndef _UAPI_LINUX_VIRTIO_BT_H +#define _UAPI_LINUX_VIRTIO_BT_H + +#include <linux/virtio_types.h> + +/* Feature bits */ +#define VIRTIO_BT_F_VND_HCI 0 /* Indicates vendor command support */ +#define VIRTIO_BT_F_MSFT_EXT 1 /* Indicates MSFT vendor support */ +#define VIRTIO_BT_F_AOSP_EXT 2 /* Indicates AOSP vendor support */ + +enum virtio_bt_config_type { + VIRTIO_BT_CONFIG_TYPE_PRIMARY = 0, + VIRTIO_BT_CONFIG_TYPE_AMP = 1, +}; + +enum virtio_bt_config_vendor { + VIRTIO_BT_CONFIG_VENDOR_NONE = 0, + VIRTIO_BT_CONFIG_VENDOR_ZEPHYR = 1, + VIRTIO_BT_CONFIG_VENDOR_INTEL = 2, + VIRTIO_BT_CONFIG_VENDOR_REALTEK = 3, +}; + +struct virtio_bt_config { + __u8 type; + __u16 vendor; + __u16 msft_opcode; +} __attribute__((packed)); + +#endif /* _UAPI_LINUX_VIRTIO_BT_H */ diff --git a/include/uapi/linux/virtio_ids.h b/include/uapi/linux/virtio_ids.h index bc1c0621f5ed..f0c35ce8628c 100644 --- a/include/uapi/linux/virtio_ids.h +++ b/include/uapi/linux/virtio_ids.h @@ -51,8 +51,10 @@ #define VIRTIO_ID_PSTORE 22 /* virtio pstore device */ #define VIRTIO_ID_IOMMU 23 /* virtio IOMMU */ #define VIRTIO_ID_MEM 24 /* virtio mem */ +#define VIRTIO_ID_SOUND 25 /* virtio sound */ #define VIRTIO_ID_FS 26 /* virtio filesystem */ #define VIRTIO_ID_PMEM 27 /* virtio pmem */ +#define VIRTIO_ID_BT 28 /* virtio bluetooth */ #define VIRTIO_ID_MAC80211_HWSIM 29 /* virtio mac80211-hwsim */ #endif /* _LINUX_VIRTIO_IDS_H */ diff --git a/include/uapi/linux/virtio_snd.h b/include/uapi/linux/virtio_snd.h new file mode 100644 index 000000000000..dfe49547a7b0 --- /dev/null +++ b/include/uapi/linux/virtio_snd.h @@ -0,0 +1,334 @@ +/* SPDX-License-Identifier: BSD-3-Clause */ +/* + * Copyright (C) 2021 OpenSynergy GmbH + */ +#ifndef VIRTIO_SND_IF_H +#define VIRTIO_SND_IF_H + +#include <linux/virtio_types.h> + +/******************************************************************************* + * CONFIGURATION SPACE + */ +struct virtio_snd_config { + /* # of available physical jacks */ + __le32 jacks; + /* # of available PCM streams */ + __le32 streams; + /* # of available channel maps */ + __le32 chmaps; +}; + +enum { + /* device virtqueue indexes */ + VIRTIO_SND_VQ_CONTROL = 0, + VIRTIO_SND_VQ_EVENT, + VIRTIO_SND_VQ_TX, + VIRTIO_SND_VQ_RX, + /* # of device virtqueues */ + VIRTIO_SND_VQ_MAX +}; + +/******************************************************************************* + * COMMON DEFINITIONS + */ + +/* supported dataflow directions */ +enum { + VIRTIO_SND_D_OUTPUT = 0, + VIRTIO_SND_D_INPUT +}; + +enum { + /* jack control request types */ + VIRTIO_SND_R_JACK_INFO = 1, + VIRTIO_SND_R_JACK_REMAP, + + /* PCM control request types */ + VIRTIO_SND_R_PCM_INFO = 0x0100, + VIRTIO_SND_R_PCM_SET_PARAMS, + VIRTIO_SND_R_PCM_PREPARE, + VIRTIO_SND_R_PCM_RELEASE, + VIRTIO_SND_R_PCM_START, + VIRTIO_SND_R_PCM_STOP, + + /* channel map control request types */ + VIRTIO_SND_R_CHMAP_INFO = 0x0200, + + /* jack event types */ + VIRTIO_SND_EVT_JACK_CONNECTED = 0x1000, + VIRTIO_SND_EVT_JACK_DISCONNECTED, + + /* PCM event types */ + VIRTIO_SND_EVT_PCM_PERIOD_ELAPSED = 0x1100, + VIRTIO_SND_EVT_PCM_XRUN, + + /* common status codes */ + VIRTIO_SND_S_OK = 0x8000, + VIRTIO_SND_S_BAD_MSG, + VIRTIO_SND_S_NOT_SUPP, + VIRTIO_SND_S_IO_ERR +}; + +/* common header */ +struct virtio_snd_hdr { + __le32 code; +}; + +/* event notification */ +struct virtio_snd_event { + /* VIRTIO_SND_EVT_XXX */ + struct virtio_snd_hdr hdr; + /* optional event data */ + __le32 data; +}; + +/* common control request to query an item information */ +struct virtio_snd_query_info { + /* VIRTIO_SND_R_XXX_INFO */ + struct virtio_snd_hdr hdr; + /* item start identifier */ + __le32 start_id; + /* item count to query */ + __le32 count; + /* item information size in bytes */ + __le32 size; +}; + +/* common item information header */ +struct virtio_snd_info { + /* function group node id (High Definition Audio Specification 7.1.2) */ + __le32 hda_fn_nid; +}; + +/******************************************************************************* + * JACK CONTROL MESSAGES + */ +struct virtio_snd_jack_hdr { + /* VIRTIO_SND_R_JACK_XXX */ + struct virtio_snd_hdr hdr; + /* 0 ... virtio_snd_config::jacks - 1 */ + __le32 jack_id; +}; + +/* supported jack features */ +enum { + VIRTIO_SND_JACK_F_REMAP = 0 +}; + +struct virtio_snd_jack_info { + /* common header */ + struct virtio_snd_info hdr; + /* supported feature bit map (1 << VIRTIO_SND_JACK_F_XXX) */ + __le32 features; + /* pin configuration (High Definition Audio Specification 7.3.3.31) */ + __le32 hda_reg_defconf; + /* pin capabilities (High Definition Audio Specification 7.3.4.9) */ + __le32 hda_reg_caps; + /* current jack connection status (0: disconnected, 1: connected) */ + __u8 connected; + + __u8 padding[7]; +}; + +/* jack remapping control request */ +struct virtio_snd_jack_remap { + /* .code = VIRTIO_SND_R_JACK_REMAP */ + struct virtio_snd_jack_hdr hdr; + /* selected association number */ + __le32 association; + /* selected sequence number */ + __le32 sequence; +}; + +/******************************************************************************* + * PCM CONTROL MESSAGES + */ +struct virtio_snd_pcm_hdr { + /* VIRTIO_SND_R_PCM_XXX */ + struct virtio_snd_hdr hdr; + /* 0 ... virtio_snd_config::streams - 1 */ + __le32 stream_id; +}; + +/* supported PCM stream features */ +enum { + VIRTIO_SND_PCM_F_SHMEM_HOST = 0, + VIRTIO_SND_PCM_F_SHMEM_GUEST, + VIRTIO_SND_PCM_F_MSG_POLLING, + VIRTIO_SND_PCM_F_EVT_SHMEM_PERIODS, + VIRTIO_SND_PCM_F_EVT_XRUNS +}; + +/* supported PCM sample formats */ +enum { + /* analog formats (width / physical width) */ + VIRTIO_SND_PCM_FMT_IMA_ADPCM = 0, /* 4 / 4 bits */ + VIRTIO_SND_PCM_FMT_MU_LAW, /* 8 / 8 bits */ + VIRTIO_SND_PCM_FMT_A_LAW, /* 8 / 8 bits */ + VIRTIO_SND_PCM_FMT_S8, /* 8 / 8 bits */ + VIRTIO_SND_PCM_FMT_U8, /* 8 / 8 bits */ + VIRTIO_SND_PCM_FMT_S16, /* 16 / 16 bits */ + VIRTIO_SND_PCM_FMT_U16, /* 16 / 16 bits */ + VIRTIO_SND_PCM_FMT_S18_3, /* 18 / 24 bits */ + VIRTIO_SND_PCM_FMT_U18_3, /* 18 / 24 bits */ + VIRTIO_SND_PCM_FMT_S20_3, /* 20 / 24 bits */ + VIRTIO_SND_PCM_FMT_U20_3, /* 20 / 24 bits */ + VIRTIO_SND_PCM_FMT_S24_3, /* 24 / 24 bits */ + VIRTIO_SND_PCM_FMT_U24_3, /* 24 / 24 bits */ + VIRTIO_SND_PCM_FMT_S20, /* 20 / 32 bits */ + VIRTIO_SND_PCM_FMT_U20, /* 20 / 32 bits */ + VIRTIO_SND_PCM_FMT_S24, /* 24 / 32 bits */ + VIRTIO_SND_PCM_FMT_U24, /* 24 / 32 bits */ + VIRTIO_SND_PCM_FMT_S32, /* 32 / 32 bits */ + VIRTIO_SND_PCM_FMT_U32, /* 32 / 32 bits */ + VIRTIO_SND_PCM_FMT_FLOAT, /* 32 / 32 bits */ + VIRTIO_SND_PCM_FMT_FLOAT64, /* 64 / 64 bits */ + /* digital formats (width / physical width) */ + VIRTIO_SND_PCM_FMT_DSD_U8, /* 8 / 8 bits */ + VIRTIO_SND_PCM_FMT_DSD_U16, /* 16 / 16 bits */ + VIRTIO_SND_PCM_FMT_DSD_U32, /* 32 / 32 bits */ + VIRTIO_SND_PCM_FMT_IEC958_SUBFRAME /* 32 / 32 bits */ +}; + +/* supported PCM frame rates */ +enum { + VIRTIO_SND_PCM_RATE_5512 = 0, + VIRTIO_SND_PCM_RATE_8000, + VIRTIO_SND_PCM_RATE_11025, + VIRTIO_SND_PCM_RATE_16000, + VIRTIO_SND_PCM_RATE_22050, + VIRTIO_SND_PCM_RATE_32000, + VIRTIO_SND_PCM_RATE_44100, + VIRTIO_SND_PCM_RATE_48000, + VIRTIO_SND_PCM_RATE_64000, + VIRTIO_SND_PCM_RATE_88200, + VIRTIO_SND_PCM_RATE_96000, + VIRTIO_SND_PCM_RATE_176400, + VIRTIO_SND_PCM_RATE_192000, + VIRTIO_SND_PCM_RATE_384000 +}; + +struct virtio_snd_pcm_info { + /* common header */ + struct virtio_snd_info hdr; + /* supported feature bit map (1 << VIRTIO_SND_PCM_F_XXX) */ + __le32 features; + /* supported sample format bit map (1 << VIRTIO_SND_PCM_FMT_XXX) */ + __le64 formats; + /* supported frame rate bit map (1 << VIRTIO_SND_PCM_RATE_XXX) */ + __le64 rates; + /* dataflow direction (VIRTIO_SND_D_XXX) */ + __u8 direction; + /* minimum # of supported channels */ + __u8 channels_min; + /* maximum # of supported channels */ + __u8 channels_max; + + __u8 padding[5]; +}; + +/* set PCM stream format */ +struct virtio_snd_pcm_set_params { + /* .code = VIRTIO_SND_R_PCM_SET_PARAMS */ + struct virtio_snd_pcm_hdr hdr; + /* size of the hardware buffer */ + __le32 buffer_bytes; + /* size of the hardware period */ + __le32 period_bytes; + /* selected feature bit map (1 << VIRTIO_SND_PCM_F_XXX) */ + __le32 features; + /* selected # of channels */ + __u8 channels; + /* selected sample format (VIRTIO_SND_PCM_FMT_XXX) */ + __u8 format; + /* selected frame rate (VIRTIO_SND_PCM_RATE_XXX) */ + __u8 rate; + + __u8 padding; +}; + +/******************************************************************************* + * PCM I/O MESSAGES + */ + +/* I/O request header */ +struct virtio_snd_pcm_xfer { + /* 0 ... virtio_snd_config::streams - 1 */ + __le32 stream_id; +}; + +/* I/O request status */ +struct virtio_snd_pcm_status { + /* VIRTIO_SND_S_XXX */ + __le32 status; + /* current device latency */ + __le32 latency_bytes; +}; + +/******************************************************************************* + * CHANNEL MAP CONTROL MESSAGES + */ +struct virtio_snd_chmap_hdr { + /* VIRTIO_SND_R_CHMAP_XXX */ + struct virtio_snd_hdr hdr; + /* 0 ... virtio_snd_config::chmaps - 1 */ + __le32 chmap_id; +}; + +/* standard channel position definition */ +enum { + VIRTIO_SND_CHMAP_NONE = 0, /* undefined */ + VIRTIO_SND_CHMAP_NA, /* silent */ + VIRTIO_SND_CHMAP_MONO, /* mono stream */ + VIRTIO_SND_CHMAP_FL, /* front left */ + VIRTIO_SND_CHMAP_FR, /* front right */ + VIRTIO_SND_CHMAP_RL, /* rear left */ + VIRTIO_SND_CHMAP_RR, /* rear right */ + VIRTIO_SND_CHMAP_FC, /* front center */ + VIRTIO_SND_CHMAP_LFE, /* low frequency (LFE) */ + VIRTIO_SND_CHMAP_SL, /* side left */ + VIRTIO_SND_CHMAP_SR, /* side right */ + VIRTIO_SND_CHMAP_RC, /* rear center */ + VIRTIO_SND_CHMAP_FLC, /* front left center */ + VIRTIO_SND_CHMAP_FRC, /* front right center */ + VIRTIO_SND_CHMAP_RLC, /* rear left center */ + VIRTIO_SND_CHMAP_RRC, /* rear right center */ + VIRTIO_SND_CHMAP_FLW, /* front left wide */ + VIRTIO_SND_CHMAP_FRW, /* front right wide */ + VIRTIO_SND_CHMAP_FLH, /* front left high */ + VIRTIO_SND_CHMAP_FCH, /* front center high */ + VIRTIO_SND_CHMAP_FRH, /* front right high */ + VIRTIO_SND_CHMAP_TC, /* top center */ + VIRTIO_SND_CHMAP_TFL, /* top front left */ + VIRTIO_SND_CHMAP_TFR, /* top front right */ + VIRTIO_SND_CHMAP_TFC, /* top front center */ + VIRTIO_SND_CHMAP_TRL, /* top rear left */ + VIRTIO_SND_CHMAP_TRR, /* top rear right */ + VIRTIO_SND_CHMAP_TRC, /* top rear center */ + VIRTIO_SND_CHMAP_TFLC, /* top front left center */ + VIRTIO_SND_CHMAP_TFRC, /* top front right center */ + VIRTIO_SND_CHMAP_TSL, /* top side left */ + VIRTIO_SND_CHMAP_TSR, /* top side right */ + VIRTIO_SND_CHMAP_LLFE, /* left LFE */ + VIRTIO_SND_CHMAP_RLFE, /* right LFE */ + VIRTIO_SND_CHMAP_BC, /* bottom center */ + VIRTIO_SND_CHMAP_BLC, /* bottom left center */ + VIRTIO_SND_CHMAP_BRC /* bottom right center */ +}; + +/* maximum possible number of channels */ +#define VIRTIO_SND_CHMAP_MAX_SIZE 18 + +struct virtio_snd_chmap_info { + /* common header */ + struct virtio_snd_info hdr; + /* dataflow direction (VIRTIO_SND_D_XXX) */ + __u8 direction; + /* # of valid channel position values */ + __u8 channels; + /* channel position values (VIRTIO_SND_CHMAP_XXX) */ + __u8 positions[VIRTIO_SND_CHMAP_MAX_SIZE]; +}; + +#endif /* VIRTIO_SND_IF_H */ |