summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeFilesLines
* [Blackfin] arch: fix bug gdb testing on hardware has regressionRobin Getz2007-12-241-7/+30
| | | | | | | | | | | | http://blackfin.uclinux.org/gf/project/toolchain/tracker/?action=TrackerItemEdit&tracker_item_id=3651 As Bernd predicted, this was only necessary because of other problems in the kenel - fixing those, and this is not necessary, so remove it. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
* [Blackfin] arch: fix bug - trap_tests fails to recover on some tests.Robin Getz2008-01-275-71/+99
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3719 When the CPLBs get a miss, we do: - find a victim in the HW table - remove the victim - find the replacement in the software table - put it into the HW table. If we can't find a replacement in the software table, we accidently leave a duplicate in the HW table. This patch ensures that duplicate is marked as not valid. What we should do is find the replacement in the software table, before we find a victim in the HW table - but its too late in the release cycle to do that much restructuring of this code. Rather that duplicate code, connect Hardware Errors (irq5) into trap_c, so user space processes get killed properly. The rest of irq_panic() can be moved into traps.c (later) There is still a small corner case that causes problems when a pheriperal interrupt goes off a single cycle before a user space hardware error. This causes a kernel panic, rather than the user space process being killed. But, this checkin makes things work in 99.9% of the cases, and is a vast improvement from what is there today (which fails 100% of the time). Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
* [Blackfin] arch: Add a note describing what is going on - no functional changesRobin Getz2008-01-271-2/+13
| | | | | | Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
* printk: revert ktime_get() timestampsIngo Molnar2008-01-271-3/+1
| | | | | | | | | | revert 19ef9309273d26cb005cb23e6a370353dca91099. Kevin Winchester reported a lockup during X startup an bisected it to this commit. Reported-by: Kevin Winchester <kjwinchester@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds2008-01-2623-97/+1052
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: [CIFS] DFS build fixes [CIFS] DFS support: provide shrinkable mounts [CIFS] Do not log path names in lookup errors [CIFS] DFS support patchset: Added mountdata [CIFS] Forgot to add two new files from previous commit [CIFS] DNS name resolution helper upcall for cifs [CIFS] fix checkpatch warnings in fs/cifs/inode.c [CIFS] hold ses sem on tcp session reconnect during mount [CIFS] Allow setting mode via cifs acl [CIFS] fix unicode string alignment in SPNEGO setup [CIFS] cifs_partialpagewrite() cleanup [CIFS] use krb5 session key from first SMB session after a NegProt [CIFS] redo existing session setup if needed in cifs_mount [CIFS] Only dump SPNEGO key if CONFIG_CIFS_DEBUG2 is set [CIFS] fix SetEA failure to some Samba versions
| * [CIFS] DFS build fixesSteve French2008-01-256-31/+61
| | | | | | | | | | | | Also includes a few minor changes suggested by Christoph Signed-off-by: Steve French <sfrench@us.ibm.com>
| * [CIFS] DFS support: provide shrinkable mountsIgor Mammedov2008-01-255-1/+387
| | | | | | | | | | Signed-off-by: Igor Mammedov <niallain@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
| * [CIFS] Do not log path names in lookup errorsSteve French2008-01-201-6/+4
| | | | | | | | | | | | | | | | | | | | Andi Kleen noticed that we were logging access denied errors (which is noisy in the dmesg log, and not needed to be logged) and that we were logging path names on that an other errors (e.g. EIO) which we should not be doing. CC: Andi Kleen <ak@suse.de> Signed-off-by: Steve French <sfrench@us.ibm.com>
| * [CIFS] DFS support patchset: Added mountdataIgor Mammedov2008-01-113-2/+41
| | | | | | | | | | | | | | Also cifs_fs_type was made not static for ussage in dfs code. Signed-off-by: Igor Mammedov <niallain@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
| * [CIFS] Forgot to add two new files from previous commitSteve French2008-01-102-0/+155
| | | | | | | | | | | | Thanks to Igor for noticing this. CC: Igor Mammedov <niallain@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
| * [CIFS] DNS name resolution helper upcall for cifsSteve French2008-01-093-14/+42
| | | | | | | | | | | | | | | | | | | | | | | | Adds additional option CIFS_DFS_UPCALL to fs/Kconfig for enabling DFS support. Resolved IP address is saved as a string in the key payload. Igor has a series of related patches that will follow which finish up CIFS DFS support Acked-by: Igor Mammedov <niallain@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
| * [CIFS] fix checkpatch warnings in fs/cifs/inode.cSteve French2008-01-083-25/+31
| | | | | | | | Signed-off-by: Steve French <sfrench@us.ibm.com>
| * [CIFS] hold ses sem on tcp session reconnect during mountSteve French2008-01-031-3/+3
| | | | | | | | | | Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
| * [CIFS] Allow setting mode via cifs aclSteve French2007-12-316-13/+315
| | | | | | | | | | | | | | Requires cifsacl mount flag to be on and CIFS_EXPERIMENTAL enabled CC: Shirish Pargaonkar <shirishp@us.ibm.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
| * [CIFS] fix unicode string alignment in SPNEGO setupJeff Layton2007-12-311-1/+1
| | | | | | | | | | | | | | | | | | Unicode strings need to be word aligned, but the code that handles that is currently not taking the length of the SPNEGO blob into account. Fix it to do so. Signed-off-by: Jeff Layton <jlayton@tupile.poochiereds.net> Signed-off-by: Steve French <sfrench@us.ibm.com>
| * [CIFS] cifs_partialpagewrite() cleanupSteve French2007-12-311-5/+3
| | | | | | | | | | | | | | rc cannot be -EBADF now and condition is always true Signed-off-by: Vasily Averin <vvs@sw.ru> Signed-off-by: Steve French <sfrench@us.ibm.com>
| * [CIFS] use krb5 session key from first SMB session after a NegProtJeff Layton2007-12-311-3/+5
| | | | | | | | | | | | | | | | | | Currently, any new kerberos SMB session overwrites the server's session key. The session key should only be set by the first SMB session set up on the socket. Signed-off-by: Jeff Layton <jlayton@tupile.poochiereds.net> Signed-off-by: Steve French <sfrench@us.ibm.com>
| * [CIFS] redo existing session setup if needed in cifs_mountJeff Layton2007-12-312-2/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When cifs_mount finds an existing SMB session that it can use for a new mount, it does not check to see whether that session is in need of being reconnected. An easy way to reproduce: 1) mount //server/share1 2) watch /proc/fs/cifs/DebugData for the share to go DISCONNECTED 3) mount //server/share2 with same creds as in step 1. The second mount will fail because CIFSTCon returned -EAGAIN. If you do an operation in share1 and then reattempt the mount it will work (since the session is reestablished). The following patch fixes this by having cifs_mount check the status of the session when it picks an existing session and calling cifs_setup_session on it again if it's in need of reconnection. Thanks to Wojciech Pilorz for the initial bug report. Signed-off-by: Jeff Layton <jlayton@tupile.poochiereds.net> Signed-off-by: Steve French <sfrench@us.ibm.com>
| * [CIFS] Only dump SPNEGO key if CONFIG_CIFS_DEBUG2 is setJeff Layton2007-12-311-2/+4
| | | | | | | | | | | | | | | | The SPNEGO key data is not terribly interesting except in certain debugging situations. Only dump it to the ring buffer if needed. Signed-off-by: Jeff Layton <jlayton@tupile.poochiereds.net> Signed-off-by: Steve French <sfrench@us.ibm.com>
| * [CIFS] fix SetEA failure to some Samba versionsSteve French2007-12-302-2/+2
| | | | | | | | | | | | | | Thanks to Oleg Gvozdev for noticing the problem. CC: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Steve French <sfrench@us.ibm.com>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds2008-01-2665-1446/+999
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (63 commits) ide: remove REQ_TYPE_ATA_CMD ide: switch ide_cmd_ioctl() to use REQ_TYPE_ATA_TASKFILE requests ide: switch set_xfer_rate() to use REQ_TYPE_ATA_TASKFILE requests ide: fix final status check in drive_cmd_intr() ide: check BUSY and ERROR status bits before reading data in drive_cmd_intr() ide: don't enable local IRQs for PIO-in in driver_cmd_intr() (take 2) ide: convert "empty" REQ_TYPE_ATA_CMD requests to use REQ_TYPE_ATA_TASKFILE ide: initialize rq->cmd_type in ide_init_drive_cmd() callers ide: use wait_drive_not_busy() in drive_cmd_intr() (take 2) ide: kill DATA_READY define ide: task_end_request() fix ide: use rq->nr_sectors in task_end_request() ide: remove needless ->cursg clearing from task_end_request() ide: set IDE_TFLAG_IN_* flags before queuing/executing command ide-tape: fix handling of non-special requests in ->end_request method ide: fix final status check in task_in_intr() ide: clear HOB bit for REQ_TYPE_ATA_CMD requests in ide_end_drive_cmd() ide: fix ->io_32bit race in ide_taskfile_ioctl() cmd64x: remove /proc/ide/cmd64x ide: remove broken disk byte-swapping support ...
| * | ide: remove REQ_TYPE_ATA_CMDBartlomiej Zolnierkiewicz2008-01-263-113/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | Based on the earlier work by Tejun Heo. All users are gone so we can finally remove it. Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * | ide: switch ide_cmd_ioctl() to use REQ_TYPE_ATA_TASKFILE requestsBartlomiej Zolnierkiewicz2008-01-262-34/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | Based on the earlier work by Tejun Heo. There should be no functionality changes caused by this patch. Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * | ide: switch set_xfer_rate() to use REQ_TYPE_ATA_TASKFILE requestsBartlomiej Zolnierkiewicz2008-01-263-12/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on the earlier work by Tejun Heo. Switch set_xfer_rate() to use REQ_TYPE_ATA_TASKFILE requests and make ide_wait_cmd() static. There should be no functionality changes caused by this patch. Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * | ide: fix final status check in drive_cmd_intr()Bartlomiej Zolnierkiewicz2008-01-261-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Don't check for READY_STAT bit being set for PIO-in protocol (makes the final status check in drive_cmd_intr() match the one in task_in_intr()). Also fix function name reported by ide_error() call while at it. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * | ide: check BUSY and ERROR status bits before reading data in drive_cmd_intr()Bartlomiej Zolnierkiewicz2008-01-261-3/+8
| | | | | | | | | | | | | | | Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * | ide: don't enable local IRQs for PIO-in in driver_cmd_intr() (take 2)Bartlomiej Zolnierkiewicz2008-01-261-6/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Don't enable local IRQs for PIO-in protocol in driver_cmd_intr(). While at it: * Remove redundant rq->cmd_type check. * Read status register after enabling local IRQs for no-data protocol. v2: * Re-add DRQ=1 check lost in v1 (noticed by Sergei). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * | ide: convert "empty" REQ_TYPE_ATA_CMD requests to use REQ_TYPE_ATA_TASKFILEBartlomiej Zolnierkiewicz2008-01-263-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | Based on the previous work by Tejun Heo. There should be no functionality changes caused by this patch. Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * | ide: initialize rq->cmd_type in ide_init_drive_cmd() callersBartlomiej Zolnierkiewicz2008-01-263-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Initialize rq->cmd_type in ide_wait_cmd(), ide_cmd_ioctl() and set_pio_mode() (other callers were aleady over-riding rq->cmd_type). * Remove no longer needed rq->cmd_type setup from ide_init_drive_cmd(). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * | ide: use wait_drive_not_busy() in drive_cmd_intr() (take 2)Bartlomiej Zolnierkiewicz2008-01-263-6/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use wait_drive_not_busy() in drive_cmd_intr(). v2: * Fix wait_drive_not_busy() comment (noticed by Sergei). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * | ide: kill DATA_READY defineBartlomiej Zolnierkiewicz2008-01-262-3/+2
| | | | | | | | | | | | | | | Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * | ide: task_end_request() fixTejun Heo2008-01-263-14/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | task_end_request() modified to always call ide_end_drive_cmd() for taskfile requests. Previously, ide_end_drive_cmd() was called only when IDE_TFLAG_FLAGGED was set. Also, ide_dma_intr() is modified to use task_end_request(). Enables TASKFILE ioctls to get valid register outputs on successful completion. Bart: - ported it over recent IDE changes Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * | ide: use rq->nr_sectors in task_end_request()Bartlomiej Zolnierkiewicz2008-01-261-2/+2
| | | | | | | | | | | | Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * | ide: remove needless ->cursg clearing from task_end_request()Bartlomiej Zolnierkiewicz2008-01-261-2/+0
| | | | | | | | | | | | Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * | ide: set IDE_TFLAG_IN_* flags before queuing/executing commandBartlomiej Zolnierkiewicz2008-01-265-23/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Add IDE_TFLAG_{HOB,TF,DEVICE} defines. * Set IDE_TFLAG_IN_* flags in {do_rw,ide_no_data,ide_raw}_taskfile() users. * Remove no longer needed ->tf_flags setup from ide_end_drive_cmd(). There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * | ide-tape: fix handling of non-special requests in ->end_request methodBartlomiej Zolnierkiewicz2008-01-261-0/+5
| | | | | | | | | | | | Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * | ide: fix final status check in task_in_intr()Bartlomiej Zolnierkiewicz2008-01-261-1/+1
| | | | | | | | | | | | | | | | | | | | | Check for DRQ bit being cleared on the final status check. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * | ide: clear HOB bit for REQ_TYPE_ATA_CMD requests in ide_end_drive_cmd()Bartlomiej Zolnierkiewicz2008-01-261-0/+2
| | | | | | | | | | | | | | | | | | | | | ide_dump_status() may set HOB bit before ide_end_drive_cmd() is called. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * | ide: fix ->io_32bit race in ide_taskfile_ioctl()Tejun Heo2008-01-262-5/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In ide_taskfile_ioctl(), there was a race condition involving drive->io_32bit. It was cleared and restored during ioctl requests but there was no synchronization with other requests. So, other requests could execute with the altered ->io_32bit setting or updated drive->io_32bit could be overwritten by ide_taskfile_ioctl(). This patch adds IDE_TFLAG_IO_16BIT flag to indicate to ide_pio_datablock() that 16-bit I/O is needed regardless of drive->io_32bit settting. Bart: - ported it over recent IDE changes Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * | cmd64x: remove /proc/ide/cmd64xBartlomiej Zolnierkiewicz2008-01-261-113/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This belongs to user-space (and only if really needed). text data bss dec hex filename 3874 180 28 4082 ff2 drivers/ide/pci/cmd64x.o.before 2231 180 0 2411 96b drivers/ide/pci/cmd64x.o.after Additionaly to being bloat the code reported incorrect UDMA modes for the reserved values of UDIDETCR0/1 registers. Also while at it remove unused CNTRL_DIS_RA0/1 defines. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * | ide: remove broken disk byte-swapping supportBartlomiej Zolnierkiewicz2008-01-265-41/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove broken disk byte-swapping support: - it can cause a data corruption on SMP (or if using PREEMPT on UP) - all data coming from disk are byte-swapped by taskfile_*_data() which results in incorrect identify data being reported by /proc/ide/ and IOCTLs - "hdx=bswap/byteswap" kernel parameter has been broken on m68k host drivers (including Atari/Q40 ones) since 2.5.x days (because of 'hwif' zero-ing) - byte-swapping is limited to PIO transfers (for working with TiVo disks on x86 machines using user-space solutions or dm-byteswap should result in much better performance because DMA can be used) For previous discussions please see: http://www.ussg.iu.edu/hypermail/linux/kernel/0201.0/0768.html http://lkml.org/lkml/2004/2/28/111 [ I have dm-byteswap device mapper target if somebody is interested (patch is for 2.6.4 though but I'll dust it off if needed). ] Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * | ide: add ide_busy_sleep() helperBartlomiej Zolnierkiewicz2008-01-261-22/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add ide_busy_sleep() helper and use it in do_probe(), enable_nest() and probe_hwif(). As a nice side-effect this fixes a minor bug in do_probe() (the code was reading status register without any delay). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * | ide: make CONFIG_IDEPCI_PCIBUS_ORDER visible and deprecate itBartlomiej Zolnierkiewicz2008-01-261-1/+13
| | | | | | | | | | | | | | | Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * | ide: move CONFIG_IDEPCI_PCIBUS_ORDER code to ide-scan-pci.cBartlomiej Zolnierkiewicz2008-01-262-103/+110
| | | | | | | | | | | | Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * | ide: print banner message once per controller in m68k host driversBartlomiej Zolnierkiewicz2008-01-265-35/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Print banner message once per controller in m68k host drivers. * Change printk() level to KERN_INFO in buddha, falconide and gayle. * Add banner message to q40ide. This is basically a preparation for the future IDE layer changes. Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * | ide: add ide_set_irq() inline helperBartlomiej Zolnierkiewicz2008-01-265-22/+17
| | | | | | | | | | | | | | | | | | There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * | ide-pmac: use custom hwif->sg_max_nents only if DMA support is enabledBartlomiej Zolnierkiewicz2008-01-261-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Move setting hwif->sg_max_nents from pmac_ide_setup_device() to pmac_ide_setup_dma(). Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * | rapide: remove write-only hwif->hwif_dataBartlomiej Zolnierkiewicz2008-01-261-2/+0
| | | | | | | | | | | | | | | | | | Cc: Russell King <rmk@arm.linux.org.uk> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * | ide: use ide_init_port_hw() in setup-pci.cBartlomiej Zolnierkiewicz2008-01-261-16/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Move setting hwif->gendev.parent from ide_pci_setup_ports() to ide_hwif_configure(). * Always set hwif->io_ports in ide_hwif_configure(). * Use ide_init_port_hw() in ide_hwif_configure(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * | ide: always use ide_std_init_ports() in setup-pci.cBartlomiej Zolnierkiewicz2008-01-261-5/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * ide_init_hwif_ports() call in setup-pci.c::ide_hwif_configure() doesn't depend on the default cotrol register offset, default IRQ or ppc_ide_md.ide_init_hwif implementations so ide_std_init_ports() can always be used. * Since 'base' is always non-zero and thus hwif->io_ports[IDE_DATA_OFFSET] is also non-zero always clear hwif->noprobe. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
View Lorry Controller Status