summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/tegra20-paz00.dts
Commit message (Collapse)AuthorAgeFilesLines
* ARM: tegra: Align gpio-keys node names with dtschemaKrzysztof Kozlowski2022-06-241-1/+1
| | | | | | | | The node names should be generic and DT schema expects certain pattern (e.g. with key/button/switch). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
* ARM: tegra: paz00: Add MMC aliasesDmitry Osipenko2022-02-241-2/+4
| | | | | | | | Add MMC aliases to ensure that the /dev/mmcblk IDs won't change depending on the probe order of the MMC drivers. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
* ARM: tegra: paz00: Enable S/PDIF and HDMI audioDmitry Osipenko2021-12-161-0/+8
| | | | | | | | | | Enable S/PDIF controller to enable HDMI audio support on Toshiba AC100. Use nvidia,fixed-parent-rate property that prevents audio rate conflict between S/PDIF and I2S. Tested-by: Agneli <poczt@protonmail.ch> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
* ARM: tegra: Add OPP tables and power domains to Tegra20 device-treesDmitry Osipenko2021-12-161-0/+1
| | | | | | | | | | Add OPP tables and power domains to all peripheral devices which support power management on Tegra20 SoC. Tested-by: Paul Fertser <fercerpav@gmail.com> # PAZ00 T20 Tested-by: Nicolas Chauvet <kwizart@gmail.com> # PAZ00 T20 Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
* ARM: tegra: Add dummy backlight power suppliesThierry Reding2021-12-151-0/+3
| | | | | | | | | | | | | | | | | | | | The Medcom Wide and PAZ00 boards don't specify the power supply for the backlight, which means that the Linux driver will provide a dummy one. Wire up an explicit dummy to also make the DT schema validation succeed. Unfortunately I don't have access to the schematics for the Medcom Wide, so I don't know if a more accurate description is possible. The AC100 (PAZ00) schematics from here: https://www.s-manuals.com/pdf/motherboard/compal/compal_la-6352p_r1.0a_schematics.pdf aren't entirely clear which one of the supplies powers backlight, but the panel supply is probably close enough. Based on work by David Heidelberg <david@ixit.cz>. Signed-off-by: Thierry Reding <treding@nvidia.com>
* ARM: tegra: Remove PHY reset GPIO references from USB controller nodeThierry Reding2021-12-151-2/+0
| | | | | | | | The PHY reset GPIO references belong in the USB PHY nodes, where they already exist. There is no need to keep them in the USB controller's device tree node as well. Signed-off-by: Thierry Reding <treding@nvidia.com>
* ARM: tegra: Rename CPU and EMC OPP table device-tree nodesDmitry Osipenko2021-12-141-1/+1
| | | | | | | | | OPP table name now should start with "opp-table" and OPP entries shouldn't contain commas and @ signs in accordance to the new schema requirement. Reorganize CPU and EMC OPP table device-tree nodes. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
* ARM: tegra: Rename top-level regulatorsDmitry Osipenko2021-12-141-2/+2
| | | | | | | | | | | | | | | | Regulators defined at the top level in device tree are no longer part of a simple bus and therefore don't have a reg property. Nodes without a reg property shouldn't have a unit-address either, so drop the unit address from the node names. To ensure nodes aren't duplicated (in which case they would end up merged in the final DTB), append the name of the regulator to the node name. [treding@nvidia.com: factored out patch and wrote commit message] Signed-off-by: David Heidelberg <david@ixit.cz> Co-developed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
* ARM: tegra: Rename top-level clocksDavid Heidelberg2021-12-141-1/+1
| | | | | | | | | | | | | | | | Clocks defined at the top level in device tree are no longer part of a simple bus and therefore don't have a reg property. Nodes without a reg property shouldn't have a unit-address either, so drop the unit address from the node names. To ensure nodes aren't duplicated (in which case they would end up merged in the final DTB), append the name of the clock to the node name. [treding@nvidia.com: factored out patch and wrote commit message] Signed-off-by: David Heidelberg <david@ixit.cz> Co-developed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
* ARM: tegra: Remove unused backlight-boot-off propertyDavid Heidelberg2021-10-071-2/+0
| | | | | | | | | | The backlight-boot-off property was proposed as a patch, but ended not being accepted since different solution was already in the place: https://patchwork.kernel.org/project/linux-arm-kernel/patch/1406806970-12561-1-git-send-email-thierry.reding@gmail.com/#21327479 Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Thierry Reding <treding@nvidia.com>
* ARM: tegra: paz00: Add interrupt to temperature sensor nodeDmitry Osipenko2021-08-131-0/+4
| | | | | | | | The TEMP_ALERT pin of LM90 temperature sensor is connected to Tegra SoC. Add interrupt property to the temperature sensor for completeness. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
* ARM: tegra: paz00: Add CPU thermal zoneDmitry Osipenko2021-05-311-2/+40
| | | | | | | | | | | Add thermal zone with a passive cooling trip for CPU. Attach it to the LM90 sensor which monitors CPU temperature. Now CPU frequencies will be throttled once trip point is reached, preventing critical overheat. Tested-by: Agneli <poczt@protonmail.ch> Tested-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
* ARM: tegra: Add reg property to Tegra20 EMC table device-tree nodesDmitry Osipenko2021-05-311-0/+1
| | | | | | | | | | The reg property is now specified for the emc-tables nodes in the Tegra20 device-tree binding. Add reg property to the EMC table device-tree nodes of Tegra20 board device-trees in order to silence dt_binding_check warning about the missing property. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
* ARM: tegra: paz00: Enable full voltage scaling ranges for CPU and Core domainsDmitry Osipenko2021-03-241-7/+7
| | | | | | | | Enable full voltage scaling ranges for CPU and Core power domains. Tested-by: Nicolas Chauvet <kwizart@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
* ARM: tegra: Add EMC OPP properties to Tegra20 device-treesDmitry Osipenko2020-11-261-0/+4
| | | | | | | | Add EMC OPP DVFS tables and update board device-trees by removing unsupported OPPs. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
* ARM: tegra: Use standard names for LED nodesThierry Reding2020-06-251-1/+1
| | | | | | LED nodes should be named led-* to match the bindings. Signed-off-by: Thierry Reding <treding@nvidia.com>
* ARM: tegra: Use numeric unit-addressesThierry Reding2020-06-251-1/+1
| | | | | | | Unit-addresses should be numeric. This fixes a validation failure seen using the json-schema tooling. Signed-off-by: Thierry Reding <treding@nvidia.com>
* ARM: tegra: Rename sdhci nodes to mmcThierry Reding2020-06-251-2/+2
| | | | | | | | | The new json-schema based validation tools require SD/MMC controller nodes to be named mmc. Rename all references to them. Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
* ARM: tegra: Remove simple regulators busThierry Reding2020-06-231-23/+15
| | | | | | | The standard way to do this is to list out the regulators at the top level. Adopt the standard way to fix validation. Signed-off-by: Thierry Reding <treding@nvidia.com>
* ARM: tegra: Remove simple clocks busThierry Reding2020-06-231-11/+4
| | | | | | | The standard way to do this is to list out the clocks at the top-level. Adopt the standard way to fix validation. Signed-off-by: Thierry Reding <treding@nvidia.com>
* ARM: tegra: Kill off "simple-panel" compatiblesRob Herring2020-04-171-1/+1
| | | | | | | | | | | "simple-panel" is a Linux driver and has never been an accepted upstream compatible string, so remove it. Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: linux-tegra@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
* ARM: dts: tegra20: paz00: Add memory timingsDmitry Osipenko2020-01-101-0/+46
| | | | | | | | | | | | PAZ00 board has two variants of DDR2 SDRAM devices for External Memory: one is Hynix HY5PS1G831CLFP-Y5 and the other is Micron MT47H128M8CF-25:H. The Micron variant doesn't have official timings in the wild, hence only timings for the Hynix are added. The memory frequency-scaling was tested using the Tegra20 devfreq driver. Tested-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
* ARM: tegra: paz00: Add CPU Operating Performance PointsDmitry Osipenko2019-10-291-0/+14
| | | | | | | | Utilize common Tegra20 CPU OPP table. CPU DVFS is available now on AC100. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
* ARM: tegra: paz00: Set up voltage regulators for DVFSDmitry Osipenko2019-10-291-7/+20
| | | | | | | | Set minimum and maximum voltages, and couple CPU/CORE/RTC regulators. Tested-by: Nicolas Chauvet <kwizart@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
* ARM: dts: paz00: fix wakeup gpio keycodeMarc Dietrich2018-09-261-3/+3
| | | | | | | | | | The power key is controlled solely by the EC, which only tiggeres this gpio after wakeup. Fixes immediately return to suspend after wake from LP1. Signed-off-by: Marc Dietrich <marvin24@gmx.de> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
* ARM: tegra: tegra20: Fix mixed tabs-spaces indentationKrzysztof Kozlowski2018-09-261-3/+3
| | | | | | | | | | | | | Fix indentation and alignment when spaces were used instead of tabs. This fixes checkpatch errors like: ERROR: code indent should use tabs where possible #306: FILE: arch/arm/boot/dts/tegra20-paz00.dts:306: +^I^I <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;$ Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
* ARM: tegra: Fix unit_address_vs_reg DTC warnings for /memoryKrzysztof Kozlowski2018-07-091-1/+1
| | | | | | | | | | | | | | | | Add a generic /memory node in each Tegra DTSI (with empty reg property, to be overidden by each DTS) and set proper unit address for /memory nodes to fix the DTC warnings: arch/arm/boot/dts/tegra20-harmony.dtb: Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name The DTB after the change is the same as before except adding unit-address to /memory node. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Thierry Reding <treding@nvidia.com>
* License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman2017-11-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ARM: tegra: Enable UDC on AC100Dmitry Osipenko2017-08-171-0/+2
| | | | | | | | | | Override the compatible string of the first USB controller to enable device mode. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Tested-by: Marc Dietrich <marvin24@gmx.de> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
* ARM: tegra: paz00: Mark panel regulator as enabled on bootMarc Dietrich2017-01-251-0/+1
| | | | | | | | | Current U-Boot enables the display already. Marking the regulator as enabled on boot fixes sporadic panel initialization failures. Signed-off-by: Marc Dietrich <marvin24@gmx.de> Tested-by: Misha Komarovskiy <zombah@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
* ARM: tegra: Add spaces around = in propertiesThierry Reding2016-07-111-1/+1
| | | | | | | | This seems to have been copied and pasted since the beginning of time, though only until Tegra124, likely because that DT was written from scratch or it was fixed along the way. Signed-off-by: Thierry Reding <treding@nvidia.com>
* ARM: tegra: Add stdout-path for various boardsJon Hunter2016-04-121-0/+4
| | | | | | | | | | | | | For Tegra boards, the device-tree alias serial0 is used for the console and so add the stdout-path information so that the console no longer needs to be passed via the kernel boot parameters. This has been tested on boards, tegra20-trimslice, tegra30-beaver, tegra114-dalmore and tegra124-jetson-tk1. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Thierry Reding <treding@nvidia.com>
* ARM: tegra: Replace legacy *,wakeup property with wakeup-sourceSudeep Holla2016-04-121-1/+1
| | | | | | | | | | | | | | | | | Though the keyboard and other driver will continue to support the legacy "gpio-key,wakeup", "nvidia,wakeup-source" boolean property to enable the wakeup source, "wakeup-source" is the new standard binding. This patch replaces all the legacy wakeup properties with the unified "wakeup-source" property in order to avoid any further copy-paste duplication. Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: linux-tegra@vger.kernel.org Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
* ARM: dts: tegra: move serial aliases to per-boardOlof Johansson2014-11-131-0/+2
| | | | | | | | | | | | | | There are general changes pending to make the /aliases/serial* entries number the serial ports on the system. On Tegra, so far the ports have been just numbered dynamically as they are configured so that makes them change. To avoid this, add specific aliases per board to keep the old numbers. This allows us to change the numbering by default on future SoCs while keeping the numbering on existing boards. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Thierry Reding <treding@nvidia.com>
* ARM: tegra: paz00: Fix some indentation inconsistenciesThierry Reding2014-07-301-3/+3
| | | | | | | | | | Indentation of the clock property used a hodgepodge of tabs and spaces. Make them more consistent (tabs for indentation followed by spaces for alignment). Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
* ARM: tegra: paz00: Add LVDS support to device treeMarc Dietrich2014-02-051-1/+45
| | | | | | | Add backlight and panel nodes for the PAZ00 TFT LCD panel. Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
* ARM: tegra: set up /aliases entries for RTCsStephen Warren2013-12-181-0/+5
| | | | | | | | | | This ensures that the PMIC RTC provides the system time, rather than the on-SoC RTC, which is not battery-backed. tegra124-venice2.dts isn't touched yet since we haven't added any off- SoC RTC device to its device tree. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* ARM: tegra: convert dts files of Tegra20 platforms to use pinctrl definesLaxman Dewangan2013-12-161-15/+15
| | | | | | | | Use Tegra pinconrol dt-binding macro to set the values of different pinmux properties of Tegra20 platforms. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
* ARM: tegra: convert device tree files to use key definesLaxman Dewangan2013-12-161-1/+2
| | | | | | | | | | | | | Use key code macros for all key code refernced for keys. For tegra20-seaboard.dts and tegra20-harmony.dts: The key comment for key (16th row and 1st column) is KEY_KPSLASH but code is 0x004e which is the key code for KEY_KPPLUS. As there other key exist with KY_KPPLUS, I am assuming key code is wrong and comment is fine. With this assumption, I am keeping the key code as KEY_KPSLASH. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
* ARM: tegra: add missing unit addresses to DTStephen Warren2013-12-161-6/+6
| | | | | | | | | | DT node names should include a unit address iff the node has a reg property. For Tegra DTs at least, we were previously applying a different rule, namely that node names only needed to include a unit address if it was required to make the node name unique. Consequently, many unit addresses are missing. Add them. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* ARM: tegra: update DT files to add reset propertiesStephen Warren2013-12-111-0/+2
| | | | | | | | | | | | An earlier patch updated the Tegra DT bindings to require resets and reset-names properties to be filled in. This patch updates the DT files to include those properties. Note that any legacy clocks and clock-names entries that are replaced by reset properties are not yet removed; the drivers must be updated to use the new resets and reset-names properties first. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* ARM: tegra: enable LP1 suspend modeJoseph Lo2013-08-121-1/+1
| | | | | | | | Enabling the LP1 suspend mode for Tegra devices. Tested-by: Marc Dietrich <marvin24@gmx.de> # paz00 board Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
* ARM: tegra20: convert device tree files to use CLK definesHiroshi Doyu2013-05-281-2/+5
| | | | | | | | | | | | Use the Tegra20 CAR binding header (tegra20-car.h) to replace magic numbers in the device tree. For example, - clocks = <&tegra_car 28>; + clocks = <&tegra_car CLK_HOST1X>; Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> [swarren, updated since tegra20-car.h moved for consistency] Signed-off-by: Stephen Warren <swarren@nvidia.com>
* ARM: tegra: convert device tree files to use IRQ definesStephen Warren2013-05-281-2/+2
| | | | | | Use the GIC and standard IRQ binding defines in all IRQ specifiers. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* ARM: tegra: convert device tree files to use GPIO definesStephen Warren2013-05-281-10/+14
| | | | | | | Use TEGRA_GPIO() macro to name all GPIOs referenced by GPIO properties, and some interrupts properties. Use standard GPIO flag defines too. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* ARM: tegra: use #include for all device treesStephen Warren2013-05-281-1/+1
| | | | | | | | | | | | | Replace /include/ (dtc) with #include (C pre-processor) for all Tegra DT files, so that gcc -E handles the entire include tree, and hence any of those files can #include some other file e.g. for constant definitions. This allows future use of #defines and header files in order to define names for various constants, such as the IDs and flags in GPIO specifiers. Use of those features will increase the readability of the device tree files. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* ARM: tegra: update device trees for USB binding reworkVenu Byravarasu2013-05-171-0/+9
| | | | | | | | | | | | | This patch updates all Tegra board files so that they contain all the properties required by the updated USB DT binding. Note that this patch only adds the new properties and does not yet remove the old properties, in order to maintain bisectability. The old properties will be removed once the driver has been updated to assume the new bindings. Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com> [swarren: fixed some newly added regulator-name properties to better match schematic, avoided duplicate regulator-name on Whistler.] Signed-off-by: Stephen Warren <swarren@nvidia.com>
* ARM: tegra: modify ULPI reset GPIO propertiesVenu Byravarasu2013-05-171-5/+5
| | | | | | | | | | 1. All Tegra20 ULPI reset GPIO DT properties are modified to indicate active low nature of the GPIO. 2. Placed USB PHY DT node immediately below the EHCI controller DT nodes and corrected reg value in the name of USB PHY DT node. Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
* clk: tegra: Fix cdev1 and cdev2 IDsPrashant Gaikwad2013-04-041-1/+1
| | | | | | | | Correct IDs for cdev1 and cdev2 are 94 and 93 respectively. Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> [swarren: split into separate driver and device-tree patches] Signed-off-by: Stephen Warren <swarren@nvidia.com>
* ARM: dts: tegra: add the PM configurations of PMCJoseph Lo2013-04-041-0/+6
| | | | | | | | Adding the PM configuration of PMC when the platform support suspend function. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
View Lorry Controller Status