summaryrefslogtreecommitdiff
path: root/arch/arm/boot
Commit message (Collapse)AuthorAgeFilesLines
* ARM: mvebu: add "jedec,spi-nor" flash compatible bindingRafał Miłecki2015-05-2512-12/+12
| | | | | | | | | | | | Starting with commit 8947e396a829 ("Documentation: dt: mtd: replace "nor-jedec" binding with "jedec, spi-nor"") we have "jedec,spi-nor" binding indicating support for JEDEC identification. Use it for all flashes that are supposed to support READ ID op according to the datasheets. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* ARM: kirkwood: add "jedec,spi-nor" flash compatible bindingRafał Miłecki2015-05-2512-12/+12
| | | | | | | | | | | | Starting with commit 8947e396a829 ("Documentation: dt: mtd: replace "nor-jedec" binding with "jedec, spi-nor"") we have "jedec,spi-nor" binding indicating support for JEDEC identification. Use it for all flashes that are supposed to support READ ID op according to the datasheets. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* ARM: mvebu: add support for the new Armada 385 based Linksys boardsImre Kaloz2015-05-254-0/+562
| | | | | | | | | | | | | | | | | | | | | This patch adds support for the Linksys WRT1200AC (Caiman) and the Linksys WRT1900AC v2 (Cobra). Both boards have: - 2 Marvell 88W8864 radios - 1 USB 3.0 port - 1 USB 2.0/eSATAp port - 2 Ethernet interfaces connected to a 88E6176 switch (1x WAN + 4x LAN) - 128MB NAND flash - 512MB RAM gregory.clement@free-electrons.com: use serial0:115200n8 in stdout-path and remove the bootargs part in the chosen node Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* ARM: mvebu: add alias for mdio on Armada 38xImre Kaloz2015-05-111-1/+1
| | | | | | This allows us to reference it later. Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
* ARM: dts: dove: Add Compulab SBC-A510 to MakefileSebastian Hesselbarth2015-05-111-1/+2
| | | | | | | | With reworked device tree files for Compulab CM-A510 SoM and SBC-A510 base board, now add the correspoding board file to Makefile again. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* ARM: dts: dove: Add proper support for Compulab CM-A510/SBC-A510Sebastian Hesselbarth2015-05-113-38/+377
| | | | | | | | | | | | | | | | | | | Existing dts file for Compulab CM-A510 was very limited due to missing hardware. Now that we actually found somebody with that board, properly rework it to provide a CoM/SoM include and a board file for Compulab's SBC-A510. Both the CM-A510 SoM and the SBC-A510 can be configured with different options, so we only enable a minimum set of options. The actual board configuration will have to be set by either the bootloader or user. Although functionally not required, repeat even disabled nodes again to increse their visibility in the dtsi/dts files. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Gabriel Dobato <dobatog@gmail.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* ARM: dts: dove: Remove Compulab CM-A510 from MakefileSebastian Hesselbarth2015-05-111-1/+0
| | | | | | | | Prior reworking Dove based Compulab CM-A510 device tree, remove it from the compiled device tree files. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* ARM: dts: dove: Add internal i2c multiplexer nodeSebastian Hesselbarth2015-05-111-2/+38
| | | | | | | | | | | | | | | | This adds a i2c-mux-pinctrl node to dove.dtsi for the internal i2c mux found on Dove SoCs. Up to now, we had no board using any of the two additional i2c busses, so make sure the change does not break any existing boards. Therefore, we rename the i2c-controller node label to "i2c" and enable it by default. Also, the dedicated sub-bus (now "i2c0") is enabled by default. The two optional sub-busses require additional external pin-muxing, so disable them by default. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds2015-04-221-1/+13
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull watchdog updates from Wim Van Sebroeck: "This contains following changes: - Octeon: convert to watchdog-API and apply some fixes - Cadence wdt: remove dependency on ARCH - add DT bindings for qcom + msm - bcm281xx: Remove use of seq_printf return value - stmp3xxx_rtc_wdt + pnx4008_wdt: fix broken email addresses" * git://www.linux-watchdog.org/linux-watchdog: watchdog: stmp3xxx_rtc_wdt: fix broken email address watchdog: pnx4008_wdt: fix broken email address watchdog: octeon: use fixed length string for register names watchdog: octeon: fix some trivial coding style issues watchdog: octeon: convert to WATCHDOG_CORE API watchdog: cadence: Remove Kconfig dependency on ARCH ARM: msm: add watchdog entries to DT timer binding doc ARM: qcom: add description of KPSS WDT for IPQ8064 watchdog: qcom: use timer devicetree binding watchdog: bcm281xx: Remove use of seq_printf return value
| * ARM: qcom: add description of KPSS WDT for IPQ8064Mathieu Olivari2015-04-221-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | Add the watchdog related entries to the Krait Processor Sub-system (KPSS) timer IPQ8064 devicetree section. Also, add a fixed-clock description of SLEEP_CLK, which will do for now. Signed-off-by: Josh Cartwright <joshc@codeaurora.org> Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* | Merge tag 'armsoc-late' of ↵Linus Torvalds2015-04-2252-1227/+2437
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late changes from Olof Johansson: "We were expecting to sit on this branch through most of the merge window since the contents was merged into our tree late, but we ended up sitting on all of our contents so it can go in with the rest. The contents here is: - a large branch of cleanups of the CM/PRM blocks on OMAP. - a couple of patches plumbing up CM/PRM on OMAP5 and DRA7. - a branch with DT updates for Freescale i.MX. including some shuffling from .dts to .dtsi (include) files that causes a little churn" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (78 commits) ARM: OMAP2+: Fix booting with configs that don't have MFD_SYSCON ARM: OMAP4+: control: add support for initializing control module via DT ARM: dts: dra7: add minimal l4 bus layout with control module support ARM: dts: omap5: add minimal l4 bus layout with control module support ARM: OMAP4+: control: remove support for legacy pad read/write ARM: OMAP4: display: convert display to use syscon for dsi muxing ARM: dts: omap4: add minimal l4 bus layout with control module support ARM: dts: am4372: add minimal l4 bus layout with control module support ARM: dts: am43xx-epos-evm: fix pinmux node layout ARM: dts: am33xx: add minimal l4 bus layout with control module support ARM: dts: omap3: add minimal l4 bus layout with control module support ARM: dts: omap24xx: add minimal l4 bus layout with control module support ARM: OMAP2+: control: add syscon support for register accesses ARM: OMAP2+: id: cache omap_type value ARM: OMAP2+: control: remove API for getting control module base address ARM: OMAP2+: clock: add low-level support for regmap ARM: OMAP4+: PRM: get rid of cpu_is_omap44xx calls from interrupt init ARM: OMAP4+: PRM: setup prm_features from the PRM init time flags ARM: OMAP2+: CM: move SoC specific init calls within a generic API ARM: OMAP4+: PRM: determine prm_device_inst based on DT compatibility ...
| * \ Merge branch 'omap/dt' into next/lateArnd Bergmann2015-04-1533-68/+1449
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As pointed out by Stephen Rothwell, commit e52117638b79 ("ARM: dts: omap3: Add DT entries for OMAP 3 ISP") conflicts with b8845074cfbb ("ARM: dts: omap3: add minimal l4 bus layout with control module support") in non-obvious ways, causing a build failure when both patches are present. This merges the two branches that introduce the respective changes into the next/late branch to resolve the way that Stephen suggested, as confirmed by Tony. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lkml.org/lkml/2015/4/6/436 Acked-by: Tony Lindgren <tony@atomide.com>
| * \ \ Merge tag 'imx-dt-4.1' of ↵Arnd Bergmann2015-04-1434-759/+1789
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/late Pull "The i.MX device tree updates for 4.1" from Shawn Guo: - Convert GPC controller to use stacked interrupt domains - Add power domain descriptions for i.MX6 platforms - Improve i.MX25 pin function defines - Disable PWM devices in <soc>.dtsi by default and enable it at board level dts where the device is actually available. - Define labels for SNVS RTC device to ease the board description, where an external RTC is available. - Add dr_mode host setting to all i.MX host-only USB instances - Support Miscellaneous System Control Module (MSCM) for VF610 - Add initial i.MX6SL WaRP Board support - Add i.MX6SX SDB revision B board support - A bunch of imx28-apf28dev board updates, including gpio polarity correction and CAN, AUART device support. - SolidRun iMX6 platform updates: dual-license of GPLv2/X11, PWM setup, PCF8523 RTC, GPIO key and SGTL5000 audio support. - A number of random device additions for boards: SPI and CAN for vf-colibri, MAX7310 GPIO expander for imx6qdl-sabreauto and LCD support for imx25-pdk. Note: Branch imx/cleanup was merged as the base to solve conflict on imx25 iomux header. Branch imx/soc was merged as the base to solve conflict on arch/arm/mach-imx/gpc.c. And Jason Cooper's irqchip/vybrid branch was pulled into the base as a run-time dependency. * tag 'imx-dt-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (69 commits) ARM: dts: hummingboard: add sgtl5000 support for Hummingboard Pro ARM: dts: imx25-pinfunc: Add several pinfunctions ARM: dts: vf610: fix missing irqs ARM: dts: cubox: Map gpio-keys to gpio3 8 ARM: dts: hummingboard: Setup pwm lines ARM: dts: hummingboard: enable PCF8523 RTC support ARM: dts: Re-license SolidRun iMX6 platform DT GPL v2/X11 ARM: dts: imx28: add alternative pinmuxing for spi3 ARM: dts: imx6sx: Add label snvs_rtc ARM: dts: imx6sl: Add label snvs_rtc ARM: imx6: Warn when an old DT is detected ARM: imx6: Allow GPC interrupts affinity to be changed ARM: imx6qdl-sabreauto.dtsi: add max7310 support ARM: dts: imx6sl-warp: Add BCM4330 support ARM: dts: imx28-apf28dev: add wakeup function to user button ARM: dts: imx28-apf28dev: fix user button polarity ARM: dts: imx25-pinfunc: remove input values for pinfuncs without input register ARM: dts: vf610: add Miscellaneous System Control Module (MSCM) ARM: dts: imx6sl-warp: Pass 'bus-width' property ARM: dts: imx6qdl: disable PWMs by default ...
| | * | | ARM: dts: hummingboard: add sgtl5000 support for Hummingboard ProRussell King2015-03-301-0/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the DT description for the SGTL5000 found on the Hummingboard Pro model. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | | ARM: dts: imx25-pinfunc: Add several pinfunctionsMarkus Pargmann2015-03-301-0/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds some not yet defined pinfunctions. It also adds two comments about mistakes in the i.MX25 reference manual so it is easier to spot the difference between reference manual and pinfunction definitions. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | | ARM: dts: vf610: fix missing irqsStefan Agner2015-03-301-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While adding the MSCM interrupt router, all interrupts have been moved to vfxxx.dtsi again. However, some properties got lost. Readd the missing interrupt properties. Fixes: 97e6466ab9d0 ("ARM: dts: vf610: add Miscellaneous System Control Module (MSCM)") Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | | ARM: dts: cubox: Map gpio-keys to gpio3 8George Joseph2015-03-301-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Cubox has a recessed button between the HDMI and RJ-45 connectors that wasn't mapped in the device tree, so I've mapped it to gpio-keys BTN_0. Signed-off-by: George Joseph <george.joseph@fairview5.com> Tested-by: George Joseph <george.joseph@fairview5.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | | ARM: dts: hummingboard: Setup pwm linesRabeeh Khoury2015-03-301-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Setup pwm lines as follows - pwm1: In case HummingBoard base carrier; this pin drives through a serial capacitor the mono out of the audio jack. In case HummingBoard pro the this pad can be reached by wiring to C8 capacitors on the board. pwm2: Setup pwm2 on gpio-1 but leave the default function of the iopad as a gpio. The user can change the io pad mux in user space and therefore use this function on gpio-1 (pin number 7 on the 26 pin header). pwm3,pwm4: unused Signed-off-by: Rabeeh Khoury <rabeeh@solid-run.com> [tweaked alias for pwm pinctrl group --rmk] Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | | ARM: dts: hummingboard: enable PCF8523 RTC supportRussell King2015-03-301-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable the commented out PCF8523 RTC support for Hummingboard pro base boards. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | | ARM: dts: Re-license SolidRun iMX6 platform DT GPL v2/X11Russell King2015-03-308-0/+304
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update SolidRun iMX6 platforms DT descriptions to be dual-licensed. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Rabeeh Khoury <rabeeh@solid-run.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | | ARM: dts: imx28: add alternative pinmuxing for spi3Uwe Kleine-König2015-03-301-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | | ARM: dts: imx6sx: Add label snvs_rtcFabio Estevam2015-03-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It may be useful to disable the internal snvs-rtc when an external rtc is available. This patch adds a label so that dts files can disable it. Based on a patch from Markus Pargmann for imx6qdl.dtsi. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | | ARM: dts: imx6sl: Add label snvs_rtcFabio Estevam2015-03-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It may be useful to disable the internal snvs-rtc when an external rtc is available. This patch adds a label so that dts files can disable it. Based on a patch from Markus Pargmann for imx6qdl.dtsi. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | | ARM: imx6qdl-sabreauto.dtsi: add max7310 supportPeter Chen2015-03-301-0/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | max7310 is an i2c interface gpio expander Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | | ARM: dts: imx6sl-warp: Add BCM4330 supportFabio Estevam2015-03-301-0/+71
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Warp has a Murata chip based on a BCM4330 that provides Wifi and Bluetooth functionality. Add support for it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | | ARM: dts: imx28-apf28dev: add wakeup function to user buttonGwenhael Goavec-Merou2015-03-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | | ARM: dts: imx28-apf28dev: fix user button polarityGwenhael Goavec-Merou2015-03-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | | ARM: dts: imx25-pinfunc: remove input values for pinfuncs without input registerMarkus Pargmann2015-03-301-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | input values are only useful for pin functions which define a input register. This patch removes all input values of pin functions which do not have an input configuration register. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | | ARM: dts: vf610: add Miscellaneous System Control Module (MSCM)Stefan Agner2015-03-302-137/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the Miscellaneous System Control Module (MSCM) to the base device tree for Vybrid SoC's. This module contains registers to get information of the individual and current (accessing) CPU. In a second block, there is an interrupt router, which handles the routing of the interrupts between the two CPU cores on VF6xx variants of the SoC. However, also on single core variants the interrupt router needs to be configured in order to receive interrupts on the CPU's interrupt controller. Almost all peripheral interrupts are routed through the router, hence the MSCM module is the default interrupt parent for this SoC. In a earlier commit the interrupt nodes were moved out of the peripheral nodes and specified in the CPU specific vf500.dtsi device tree. This allowed to use the base device tree vfxxx.dtsi also for a Cortex-M4 specific device tree, which uses different interrupt nodes due to the NVIC interrupt controller. However, since the interrupt parent for peripherals is the MSCM module independently which CPU the device tree is used for, we can move the interrupt nodes into the base device tree vfxxx.dtsi again. Depending on which CPU this base device tree will be used with, the correct parent interrupt controller has to be assigned to the MSCM-IR node (GIC or NVIC). The driver takes care of the parent interrupt controller specific needs (interrupt-cells). Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | | ARM: dts: imx6sl-warp: Pass 'bus-width' propertyFabio Estevam2015-03-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | USDHC2 port uses all the 8 data signals, so pass the 'bus-width' property accordingly. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | | ARM: dts: imx6qdl: disable PWMs by defaultPhilipp Zabel2015-03-301-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since PWMs are only useful if they are actually connected to an output pin, let users enable them explicitly in their device trees where they should also set up the pin configuration. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | | ARM: dts: hummingboard/cubox-i: enable front LED PWM explicitlyPhilipp Zabel2015-03-301-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All PWM users should explicitly enable the used PWMs in their device tree so they can be disabled by default in imx6qdl.dtsi. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | | ARM: dts: imx6dl-aristainetos: enable backlight PWM explicitlyPhilipp Zabel2015-03-302-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All PWM users should explicitly enable the used PWMs in their device tree so they can be disabled by default in imx6qdl.dtsi. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | | ARM: dts: imx6qdl: Allow disabling the PU regulator, add a enable ramp delayPhilipp Zabel2015-03-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PU regulator is enabled during boot, but not necessarily always-on. It can be disabled by the generic pm domain framework when the PU power domain is shut down. The ramp delay of 150 us might be a bit conservative, the value is taken from the Freescale kernel. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | | ARM: dts: imx6sl: Add power-domain information to gpc nodePhilipp Zabel2015-03-301-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PGC that is part of GPC controls isolation and power sequencing of the power domains. The PU power domain will be handled by the generic pm domain framework. It needs a phandle to the PU regulator to turn off power when the domain is disabled and a list of clocks to be enabled during powerup for reset propagation. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | | ARM: dts: imx6qdl: Add power-domain information to gpc nodePhilipp Zabel2015-03-301-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PGC that is part of GPC controls isolation and power sequencing of the power domains. The PU power domain will be handled by the generic pm domain framework. It needs a phandle to the PU regulator to turn off power when the domain is disabled, and a list of phandles to all clocks that must be enabled during powerup for reset propagation. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | | ARM: dts: imx: Add dr_mode host setting to all host-only usb instancesMatt Porter2015-03-309-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The chipidea driver adds an extra line of spam to the log when a host-only chipidea instance is left set to the default of a dual role controller. [ 2.010873] ci_hdrc ci_hdrc.1: doesn't support gadget Set the dr_mode property to host on all the host-only nodes to avoid this warning. Signed-off-by: Matt Porter <mporter@konsulko.com> Acked-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | | ARM: dts: warp: Add initial WaRP Board supportOtavio Salvador2015-03-302-1/+192
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The WaRP Board is a Wearable Reference Plaform. The board features: - Freescale i.MX6 SoloLite processor with 512MB of RAM - Freescale FXOS8700CQ 6-axis Xtrinsic sensor - Freescale Kinetis KL16 MCU - Freescale Xtrinsic MMA955xL intelligent motion sensing platform The board implements a hybrid architecture to address the evolving needs of the wearables market. The platform consists of a main board and an example daughtercard with the ability to add additional daughtercards for different usage models. For more information about the project, visit: http://www.warpboard.org/ Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | | ARM: dts: vf610: remove unused gpio-range-cells propertyStefan Agner2015-03-301-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The anyway depricated gpio-range-cells property was never used by the pin controller driver. This patch removes it. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | | ARM: imx6: convert GPC to stacked domainsMarc Zyngier2015-03-303-3/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | IMX6 has been (ab)using the gic_arch_extn to provide wakeup from suspend, and it makes a lot of sense to convert this code to use stacked domains instead. This patch does just this, updating the DT files to actually reflect what the HW provides. BIG FAT WARNING: because the DTs were so far lying by not exposing the fact that the GPC block is actually the first interrupt controller in the chain, kernels with this patch applied wont have any suspend-resume facility when booted with old DTs, and old kernels with updated DTs won't even boot. Tested-by: Stefan Agner <stefan@agner.ch> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | | ARM: dts: imx25-pdk: Add LCD supportFabio Estevam2015-03-301-0/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the CLAA057VC01CW display. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | | ARM: dts: imx25-pinfunc: more definesUwe Kleine-König2015-03-301-5/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add some defines currently missing, fix ordering to make the list sorted by (mux_reg, mux_val), make sure pins are grouped by mux_reg. The same definitions are missing from the old pinmux header (arch/arm/mach-imx/iomux-mx25.h) but as only legacy machine support uses that and therefor the existing list is obviously good enough I didn't spend the effort to add the corresponding definitions there, too. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | | ARM: imx25: fix some wrong iomux definitionsUwe Kleine-König2015-03-301-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Noticed while looking over the pad definitions. None of the bogus definitions is used in-tree. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | | ARM: dts: imx6qdl: Add label snvs_rtcMarkus Pargmann2015-03-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It may be useful to disable the internal rtc snvs-rtc because an external rtc is available. This patch adds a label so that board files can disable this rtc. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | | ARM: dts: imx28-apf28dev: add support for auart0Gwenhael Goavec-Merou2015-03-301-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Sebastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | | ARM: dts: imx28-apf28dev: add support for can0Gwenhael Goavec-Merou2015-03-301-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Sebastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | | ARM: dts: imx28-apf28dev: fix mac1 gpio location and polarityGwenhael Goavec-Merou2015-03-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Sebastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | | ARM: dts: imx28-apf28: fix mac0 gpio polarityGwenhael Goavec-Merou2015-03-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Sebastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | | ARM: dts: imx28-apf28dev: Add pinctrl for USB OTG ID pinGwenhael Goavec-Merou2015-03-301-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Sebastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | | ARM: dts: imx6qdl: Move existing MIPI DSI ports into a new 'ports' nodeLiu Ying2015-03-302-18/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MIPI DSI node contains some ports which represent possible DRM CRTCs it can connect with. Each port has a 'reg' property embedded. This property will be wrongly interpretted by the MIPI DSI bus driver, because the driver will take each subnode which contains a 'reg' property as a DSI peripheral device. This patch moves the existing MIPI DSI ports into a new 'ports' node so that the MIPI DSI bus driver may distinguish its DSI peripheral device(s) from the existing ports. Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Liu Ying <Ying.Liu@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
View Lorry Controller Status