summaryrefslogtreecommitdiff
path: root/arch/powerpc/kernel/prom.c
Commit message (Collapse)AuthorAgeFilesLines
* powerpc/pseries: Pass PLPKS password on kexecRussell Currey2023-02-121-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | Before interacting with the PLPKS, we ask the hypervisor to generate a password for the current boot, which is then required for most further PLPKS operations. If we kexec into a new kernel, the new kernel will try and fail to generate a new password, as the password has already been set. Pass the password through to the new kernel via the device tree, in /chosen/ibm,plpks-pw. Check for the presence of this property before trying to generate a new password - if it exists, use the existing password and remove it from the device tree. This only works with the kexec_file_load() syscall, not the older kexec_load() syscall, however if you're using Secure Boot then you want to be using kexec_file_load() anyway. Signed-off-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20230210080401.345462-24-ajd@linux.ibm.com
* powerpc/64: Move paca allocation to early_setup()Nicholas Piggin2023-02-101-9/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The early paca and boot cpuid dance is complicated and currently does not quite work as expected for boot cpuid != 0 cases. early_init_devtree() currently allocates the paca_ptrs and boot cpuid paca, but until that returns and early_setup() calls setup_paca(), this thread is currently still executing with smp_processor_id() == 0. One problem this causes is the paca_ptrs[smp_processor_id()] pointer is poisoned, so valid_emergency_stack() (any backtrace) and any similar users will crash. Another is that the hardware id which is set here will not be returned by get_hard_smp_processor_id(smp_processor_id()), but it would work correctly for boot_cpuid == 0, which could lead to difficult to reproduce or find bugs. The hard id does not seem to be used by the rest of early_init_devtree(), it just looks like all this code might have been put here to allocate somewhere to store boot CPU hardware id while scanning the devtree. Rearrange things so the hwid is put in a global variable like boot_cpuid, and do all the paca allocation and boot paca setup in the 64-bit early_setup() after we have everything ready to go. The paca_ptrs[0] re-poisoning code in early_setup does not seem to have ever worked, because paca_ptrs[0] was never not-poisoned when boot_cpuid is not 0. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Fix build error on 32-bit] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221216115930.2667772-4-npiggin@gmail.com
* powerpc/prom: Fix 32-bit buildMichael Ellerman2022-12-081-1/+2
| | | | | | | | | | Add an IS_ENABLED() check to fix the build error: arch/powerpc/kernel/prom.o: in function `early_init_dt_scan_cpus': prom.c:(.init.text+0x2ea): undefined reference to `boot_cpu_node_count' Fixes: e13d23a404f2 ("powerpc: export the CPU node count") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc: export the CPU node countLaurent Dufour2022-12-071-0/+3
| | | | | | | | | | | | | | At boot time, the FDT is parsed to compute the number of CPUs. In addition count the number of CPU nodes and export it. This is useful when building the FDT for a kexeced kernel since we need to take in account the CPU node added since the boot time during CPU hotplug operations. Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221110180619.15796-2-ldufour@linux.ibm.com
* powerpc: Add device-tree model to the hardware descriptionMichael Ellerman2022-09-301-0/+19
| | | | | | | | | | | Add the model of the machine we're on to the hardware description, which is printed at boot and in case of an oops. eg: Hardware name: IBM,8247-22L Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220930082709.55830-4-mpe@ellerman.id.au
* powerpc/64: Add logical PVR to the hardware descriptionMichael Ellerman2022-09-301-1/+3
| | | | | | | | | | | If we detect a logical PVR add that to the hardware description, which is printed at boot and in case of an oops. eg: Hardware name: ... 0xf000004 Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220930082709.55830-3-mpe@ellerman.id.au
* powerpc: Add PVR & CPU name to hardware descriptionMichael Ellerman2022-09-301-0/+4
| | | | | | | | | | | Add the PVR and CPU name to the hardware description, which is printed at boot and in case of an oops. eg: Hardware name: ... POWER8E (raw) 0x4b0201 Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220930082709.55830-2-mpe@ellerman.id.au
* powerpc: Ignore DSI error caused by the copy/paste instructionHaren Myneni2022-09-281-10/+26
| | | | | | | | | | | | | | | | | | | | The data storage interrupt (DSI) error will be generated when the paste operation is issued on the suspended Nest Accelerator (NX) window due to NX state changes. The hypervisor expects the partition to ignore this error during page fault handling. To differentiate DSI caused by an actual HW configuration or by the NX window, a new “ibm,pi-features” type value is defined. Byte 0, bit 3 of pi-attribute-specifier-type is now defined to indicate this DSI error. If this error is not ignored, the user space can get SIGBUS when the NX request is issued. This patch adds changes to read ibm,pi-features property and ignore DSI error during page fault handling if MMU_FTR_NX_DSI is defined. Signed-off-by: Haren Myneni <haren@linux.ibm.com> [mpe: Mention PAPR version in comment] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/b9cd844b85eb8f70459109ce1b14e44c4cc85fa7.camel@linux.ibm.com
* powerpc/64: Init jump labels before parse_early_param()Zhouyi Zhou2022-08-011-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On 64-bit, calling jump_label_init() in setup_feature_keys() is too late because static keys may be used in subroutines of parse_early_param() which is again subroutine of early_init_devtree(). For example booting with "threadirqs": static_key_enable_cpuslocked(): static key '0xc000000002953260' used before call to jump_label_init() WARNING: CPU: 0 PID: 0 at kernel/jump_label.c:166 static_key_enable_cpuslocked+0xfc/0x120 ... NIP static_key_enable_cpuslocked+0xfc/0x120 LR static_key_enable_cpuslocked+0xf8/0x120 Call Trace: static_key_enable_cpuslocked+0xf8/0x120 (unreliable) static_key_enable+0x30/0x50 setup_forced_irqthreads+0x28/0x40 do_early_param+0xa0/0x108 parse_args+0x290/0x4e0 parse_early_options+0x48/0x5c parse_early_param+0x58/0x84 early_init_devtree+0xd4/0x518 early_setup+0xb4/0x214 So call jump_label_init() just before parse_early_param() in early_init_devtree(). Suggested-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com> [mpe: Add call trace to change log and minor wording edits.] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220726015747.11754-1-zhouzhouyi@gmail.com
* powerpc: Remove asm/prom.h from asm/mpc52xx.h and asm/pci.hChristophe Leroy2022-07-281-0/+1
| | | | | | | | | | | | asm/pci.h and asm/mpc52xx.h don't need asm/prom.h Declare struct device_node locally to avoid including of.h Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> [mpe: Add missing include of prom.h to of_rtc.c] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/cf5243343e2364c2b40f22ee5ad9a6e2453d1121.1657264228.git.christophe.leroy@csgroup.eu
* powerpc: Don't include asm/setup.h in asm/machdep.hChristophe Leroy2022-06-201-1/+1
| | | | | | | | | | | | | asm/machdep.h doesn't need asm/setup.h Remove it. Add it directly in files that needs it. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/3b1dfb19a2c3265fb4abc2bfc7b6eae9261a998b.1654966508.git.christophe.leroy@csgroup.eu
* powerpc: Remove asm/prom.h from all files that don't need itChristophe Leroy2022-05-081-1/+0
| | | | | | | | | | | Several files include asm/prom.h for no reason. Clean it up. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> [mpe: Drop change to prom_parse.c as reported by lkp@intel.com] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/7c9b8fda63dcf63e1b28f43e7ebdb95182cbc286.1646767214.git.christophe.leroy@csgroup.eu
* powerpc/64: Move paca allocation later in bootMichael Ellerman2022-02-021-5/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Mahesh & Sourabh identified two problems[1][2] with ppc64_bolted_size() and paca allocation. The first is that on a Radix capable machine but with "disable_radix" on the command line, there is a window during early boot where early_radix_enabled() is true, even though it will later become false. early_init_devtree: <- early_radix_enabled() = false early_init_dt_scan_cpus: <- early_radix_enabled() = false ... check_cpu_pa_features: <- early_radix_enabled() = false ... ^ <- early_radix_enabled() = TRUE allocate_paca: | <- early_radix_enabled() = TRUE ... | ppc64_bolted_size: | <- early_radix_enabled() = TRUE if (early_radix_enabled())| <- early_radix_enabled() = TRUE return ULONG_MAX; | ... | ... | <- early_radix_enabled() = TRUE ... | <- early_radix_enabled() = TRUE mmu_early_init_devtree() V ... <- early_radix_enabled() = false This causes ppc64_bolted_size() to return ULONG_MAX for the boot CPU's paca allocation, even though later it will return a different value. This is not currently a bug because the paca allocation is also limited by the RMA size, but that is very fragile. The second issue is that when using the Hash MMU, when we call ppc64_bolted_size() for the boot CPU's paca allocation, we have not yet detected whether 1T segments are available. That causes ppc64_bolted_size() to return 256MB, even if the machine can actually support up to 1T. This is usually OK, we generally have space below 256MB for one paca, but for a kdump kernel placed above 256MB it causes the boot to fail. At boot we cannot discover all the features of the machine instantaneously, so there will always be some periods where we have incomplete knowledge of the system. However both the above problems stem from the fact that we allocate the boot CPU's paca (and paca pointers array) before we decide which MMU we are using, or discover its exact features. Moving the paca allocation slightly later still can solve both the issues described above, and means for a normal boot we don't do any permanent allocations until after we've discovered the MMU. Note that although we move the boot CPU's paca allocation later, we still have a temporary paca (boot_paca) accessible via r13, so code that does read only access to paca fields is safe. The only risk is that some code writes to the boot_paca, and that write will then be lost when we switch away from the boot_paca later in early_setup(). The additional code that runs before the paca allocation is primarily mmu_early_init_devtree(), which is scanning the device tree and populating globals and cur_cpu_spec with MMU related flags. I do not see any additional code that writes to paca fields. [1]: https://lore.kernel.org/r/20211018084434.217772-2-sourabhjain@linux.ibm.com [2]: https://lore.kernel.org/r/20211018084434.217772-3-sourabhjain@linux.ibm.com Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220124130544.408675-1-mpe@ellerman.id.au
* Merge tag 'powerpc-5.17-1' of ↵Linus Torvalds2022-01-141-3/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Optimise radix KVM guest entry/exit by 2x on Power9/Power10. - Allow firmware to tell us whether to disable the entry and uaccess flushes on Power10 or later CPUs. - Add BPF_PROBE_MEM support for 32 and 64-bit BPF jits. - Several fixes and improvements to our hard lockup watchdog. - Activate HAVE_DYNAMIC_FTRACE_WITH_REGS on 32-bit. - Allow building the 64-bit Book3S kernel without hash MMU support, ie. Radix only. - Add KUAP (SMAP) support for 40x, 44x, 8xx, Book3E (64-bit). - Add new encodings for perf_mem_data_src.mem_hops field, and use them on Power10. - A series of small performance improvements to 64-bit interrupt entry. - Several commits fixing issues when building with the clang integrated assembler. - Many other small features and fixes. Thanks to Alan Modra, Alexey Kardashevskiy, Ammar Faizi, Anders Roxell, Arnd Bergmann, Athira Rajeev, Cédric Le Goater, Christophe JAILLET, Christophe Leroy, Christoph Hellwig, Daniel Axtens, David Yang, Erhard Furtner, Fabiano Rosas, Greg Kroah-Hartman, Guo Ren, Hari Bathini, Jason Wang, Joel Stanley, Julia Lawall, Kajol Jain, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Mark Brown, Minghao Chi, Nageswara R Sastry, Naresh Kamboju, Nathan Chancellor, Nathan Lynch, Nicholas Piggin, Nick Child, Oliver O'Halloran, Peiwei Hu, Randy Dunlap, Ravi Bangoria, Rob Herring, Russell Currey, Sachin Sant, Sean Christopherson, Segher Boessenkool, Thadeu Lima de Souza Cascardo, Tyrel Datwyler, Xiang wangx, and Yang Guang. * tag 'powerpc-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (240 commits) powerpc/xmon: Dump XIVE information for online-only processors. powerpc/opal: use default_groups in kobj_type powerpc/cacheinfo: use default_groups in kobj_type powerpc/sched: Remove unused TASK_SIZE_OF powerpc/xive: Add missing null check after calling kmalloc powerpc/floppy: Remove usage of the deprecated "pci-dma-compat.h" API selftests/powerpc: Add a test of sigreturning to an unaligned address powerpc/64s: Use EMIT_WARN_ENTRY for SRR debug warnings powerpc/64s: Mask NIP before checking against SRR0 powerpc/perf: Fix spelling of "its" powerpc/32: Fix boot failure with GCC latent entropy plugin powerpc/code-patching: Replace patch_instruction() by ppc_inst_write() in selftests powerpc/code-patching: Move code patching selftests in its own file powerpc/code-patching: Move instr_is_branch_{i/b}form() in code-patching.h powerpc/code-patching: Move patch_exception() outside code-patching.c powerpc/code-patching: Use test_trampoline for prefixed patch test powerpc/code-patching: Fix patch_branch() return on out-of-range failure powerpc/code-patching: Reorganise do_patch_instruction() to ease error handling powerpc/code-patching: Fix unmap_patch_area() error handling powerpc/code-patching: Fix error handling in do_patch_instruction() ...
| * powerpc/kernel: Add __init attribute to eligible functionsNick Child2021-12-231-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Some functions defined in `arch/powerpc/kernel` (and one in `arch/powerpc/ kexec`) are deserving of an `__init` macro attribute. These functions are only called by other initialization functions and therefore should inherit the attribute. Also, change function declarations in header files to include `__init`. Signed-off-by: Nick Child <nick.child@ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211216220035.605465-2-nick.child@ibm.com
| * powerpc/64s: Move hash MMU support code under CONFIG_PPC_64S_HASH_MMUNicholas Piggin2021-12-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Compiling out hash support code when CONFIG_PPC_64S_HASH_MMU=n saves 128kB kernel image size (90kB text) on powernv_defconfig minus KVM, 350kB on pseries_defconfig minus KVM, 40kB on a tiny config. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Fixup defined(ARCH_HAS_MEMREMAP_COMPAT_ALIGN), which needs CONFIG. Fix radix_enabled() use in setup_initial_memory_limit(). Add some stubs to reduce number of ifdefs.] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211201144153.2456614-18-npiggin@gmail.com
* | of/fdt: Rework early_init_dt_scan_memory() to call directlyRob Herring2021-12-161-11/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use of the of_scan_flat_dt() function predates libfdt and is discouraged as libfdt provides a nicer set of APIs. Rework early_init_dt_scan_memory() to be called directly and use libfdt. Cc: John Crispin <john@phrozen.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: linux-mips@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Reviewed-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org> Tested-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211215150102.1303588-1-robh@kernel.org
* | of/fdt: Rework early_init_dt_scan_root() to call directlyRob Herring2021-12-161-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use of the of_scan_flat_dt() function predates libfdt and is discouraged as libfdt provides a nicer set of APIs. Rework early_init_dt_scan_root() to be called directly and use libfdt. Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Frank Rowand <frank.rowand@sony.com> Link: https://lore.kernel.org/r/20211118181213.1433346-3-robh@kernel.org
* | of/fdt: Rework early_init_dt_scan_chosen() to call directlyRob Herring2021-12-161-1/+1
|/ | | | | | | | | | | | | | | Use of the of_scan_flat_dt() function predates libfdt and is discouraged as libfdt provides a nicer set of APIs. Rework early_init_dt_scan_chosen() to be called directly and use libfdt. Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Frank Rowand <frank.rowand@sony.com> Link: https://lore.kernel.org/r/20211118181213.1433346-2-robh@kernel.org
* Merge tag 'kbuild-v5.15' of ↵Linus Torvalds2021-09-031-1/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Add -s option (strict mode) to merge_config.sh to make it fail when any symbol is redefined. - Show a warning if a different compiler is used for building external modules. - Infer --target from ARCH for CC=clang to let you cross-compile the kernel without CROSS_COMPILE. - Make the integrated assembler default (LLVM_IAS=1) for CC=clang. - Add <linux/stdarg.h> to the kernel source instead of borrowing <stdarg.h> from the compiler. - Add Nick Desaulniers as a Kbuild reviewer. - Drop stale cc-option tests. - Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG to handle symbols in inline assembly. - Show a warning if 'FORCE' is missing for if_changed rules. - Various cleanups * tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits) kbuild: redo fake deps at include/ksym/*.h kbuild: clean up objtool_args slightly modpost: get the *.mod file path more simply checkkconfigsymbols.py: Fix the '--ignore' option kbuild: merge vmlinux_link() between ARCH=um and other architectures kbuild: do not remove 'linux' link in scripts/link-vmlinux.sh kbuild: merge vmlinux_link() between the ordinary link and Clang LTO kbuild: remove stale *.symversions kbuild: remove unused quiet_cmd_update_lto_symversions gen_compile_commands: extract compiler command from a series of commands x86: remove cc-option-yn test for -mtune= arc: replace cc-option-yn uses with cc-option s390: replace cc-option-yn uses with cc-option ia64: move core-y in arch/ia64/Makefile to arch/ia64/Kbuild sparc: move the install rule to arch/sparc/Makefile security: remove unneeded subdir-$(CONFIG_...) kbuild: sh: remove unused install script kbuild: Fix 'no symbols' warning when CONFIG_TRIM_UNUSD_KSYMS=y kbuild: Switch to 'f' variants of integrated assembler flag kbuild: Shuffle blank line to improve comment meaning ...
| * isystem: trim/fixup stdarg.h and other headersAlexey Dobriyan2021-08-191-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | Delete/fixup few includes in anticipation of global -isystem compile option removal. Note: crypto/aegis128-neon-inner.c keeps <stddef.h> due to redefinition of uintptr_t error (one definition comes from <stddef.h>, another from <linux/types.h>). Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
* | powerpc/prom: Fix unused variable ‘reserve_map’ when CONFIG_PPC32 is not setCédric Le Goater2021-08-231-2/+3
|/ | | | | | | | | | | | | | | This fixes a compile error with W=1. arch/powerpc/kernel/prom.c: In function ‘early_reserve_mem’: arch/powerpc/kernel/prom.c:625:10: error: variable ‘reserve_map’ set but not used [-Werror=unused-but-set-variable] __be64 *reserve_map; ^~~~~~~~~~~ cc1: all warnings being treated as errors Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210823090039.166120-2-clg@kaod.org
* powerpc: Remove klimitChristophe Leroy2021-06-251-1/+1
| | | | | | | | | | | | | | | klimit is a global variable initialised at build time with the value of _end. This variable is never modified, so _end symbol can be used directly. Remove klimit. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/9fa9ba6807c17f93f35a582c199c646c4a8bfd9c.1622800638.git.christophe.leroy@csgroup.eu
* powerpc/smp: Cache CPU to chip lookupSrikar Dronamraju2021-04-171-4/+15
| | | | | | | | | | | | | | | | | | | | | | On systems with large CPUs per node, even with the filtered matching of related CPUs, there can be large number of calls to cpu_to_chip_id for the same CPU. For example with 4096 vCPU, 1 node QEMU configuration, with 4 threads per core, system could be see upto 1024 calls to cpu_to_chip_id() for the same CPU. On a given system, cpu_to_chip_id() for a given CPU would always return the same. Hence cache the result in a lookup table for use in subsequent calls. Since all CPUs sharing the same core will belong to the same chip, the lookup_table has an entry for one CPU per core. chip_id_lookup_table is not being freed and would be used on subsequent CPU online post CPU offline. Reported-by: Daniel Henrique Barboza <danielhb413@gmail.com> Suggested-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210415120934.232271-4-srikar@linux.vnet.ibm.com
* powerpc/prom: Mark identical_pvr_fixup as __initNathan Chancellor2021-03-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If identical_pvr_fixup() is not inlined, there are two modpost warnings: WARNING: modpost: vmlinux.o(.text+0x54e8): Section mismatch in reference from the function identical_pvr_fixup() to the function .init.text:of_get_flat_dt_prop() The function identical_pvr_fixup() references the function __init of_get_flat_dt_prop(). This is often because identical_pvr_fixup lacks a __init annotation or the annotation of of_get_flat_dt_prop is wrong. WARNING: modpost: vmlinux.o(.text+0x551c): Section mismatch in reference from the function identical_pvr_fixup() to the function .init.text:identify_cpu() The function identical_pvr_fixup() references the function __init identify_cpu(). This is often because identical_pvr_fixup lacks a __init annotation or the annotation of identify_cpu is wrong. identical_pvr_fixup() calls two functions marked as __init and is only called by a function marked as __init so it should be marked as __init as well. At the same time, remove the inline keywork as it is not necessary to inline this function. The compiler is still free to do so if it feels it is worthwhile since commit 889b3c1245de ("compiler: remove CONFIG_OPTIMIZE_INLINING entirely"). Fixes: 14b3d926a22b ("[POWERPC] 4xx: update 440EP(x)/440GR(x) identical PVR issue workaround") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://github.com/ClangBuiltLinux/linux/issues/1316 Link: https://lore.kernel.org/r/20210302200829.2680663-1-nathan@kernel.org
* powerpc: remove unneeded semicolonsChengyang Fan2021-02-091-1/+1
| | | | | | | | Remove superfluous semicolons after function definitions. Signed-off-by: Chengyang Fan <cy.fan@huawei.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210125095338.1719405-1-cy.fan@huawei.com
* powerpc/feature: Remove CPU_FTR_NODSISRALIGNChristophe Leroy2020-12-041-1/+0
| | | | | | | | | | | | CPU_FTR_NODSISRALIGN has not been used since commit 31bfdb036f12 ("powerpc: Use instruction emulation infrastructure to handle alignment faults") Remove it. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/05d98136b24bbf11525445414bb18cffe2724f48.1602587470.git.christophe.leroy@csgroup.eu
* powerpc/mm/book3s: Split radix and hash MAX_PHYSMEM limitAneesh Kumar K.V2020-09-151-0/+5
| | | | | | | | | | | | | MAX_PHYSMEM #define is used along with sparsemem to determine the SECTION_SHIFT value. Powerpc also uses the same value to limit the max memory enabled on the system. With 4K PAGE_SIZE and hash translation mode, we want to limit the max memory enabled to 64TB due to page table size restrictions. However, with radix translation, we don't have these restrictions. Hence split the radix and hash MA_PHYSMEM limit and use different limit for each of them. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200608070904.387440-4-aneesh.kumar@linux.ibm.com
* powerpc/drmem: Make LMB walk a bit more flexibleHari Bathini2020-07-291-5/+8
| | | | | | | | | | | | | | | | | | | | Currently, numa & prom are the only users of drmem LMB walk code. Loading kdump with kexec_file also needs to walk the drmem LMBs to setup the usable memory ranges for kdump kernel. But there are couple of issues in using the code as is. One, walk_drmem_lmb() code is built into the .init section currently, while kexec_file needs it later. Two, there is no scope to pass data to the callback function for processing and/or erroring out on certain conditions. Fix that by, moving drmem LMB walk code out of .init section, adding scope to pass data to the callback function and bailing out when an error is encountered in the callback function. Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Tested-by: Pingfan Liu <piliu@redhat.com> Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/159602282727.575379.3979857013827701828.stgit@hbathini
* powerpc/watchpoint: Set CPU_FTR_DAWR1 based on pa-features bitRavi Bangoria2020-07-261-0/+2
| | | | | | | | | | | | | As per the PAPR, bit 0 of byte 64 in pa-features property indicates availability of 2nd DAWR registers. i.e. If this bit is set, 2nd DAWR is present, otherwise not. Host generally uses "cpu-features", which masks "pa-features". But "cpu-features" are still not used for guests and thus this change is mostly applicable for guests only. Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Tested-by: Jordan Niethe <jniethe5@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200723090813.303838-7-ravi.bangoria@linux.ibm.com
* powerpc/book3s64/pkeys: Add MMU_FTR_PKEYAneesh Kumar K.V2020-07-201-0/+5
| | | | | | | | | | | | Parse storage keys related device tree entry in early_init_devtree and enable MMU feature MMU_FTR_PKEY if pkeys are supported. MMU feature is used instead of CPU feature because this enables us to group MMU_FTR_KUAP and MMU_FTR_PKEY in asm feature fixup code. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200709032946.881753-14-aneesh.kumar@linux.ibm.com
* powerpc/prom: Enable Radix GTSE in cpu pa-featuresNicholas Piggin2020-07-201-1/+1
| | | | | | | | | | | | | | | | When '029ab30b4c0a ("powerpc/mm: Enable radix GTSE only if supported.")' made GTSE an MMU feature, it was enabled by default in powerpc-cpu-features but was missed in pa-features. This causes random memory corruption during boot of PowerNV kernels where CONFIG_PPC_DT_CPU_FTRS isn't enabled. Fixes: 029ab30b4c0a ("powerpc/mm: Enable radix GTSE only if supported.") Reported-by: Qian Cai <cai@lca.pw> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Bharata B Rao <bharata@linux.ibm.com> [mpe: Unwrap long line] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200720044258.863574-1-bharata@linux.ibm.com
* mm: reorder includes after introduction of linux/pgtable.hMike Rapoport2020-06-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include of the latter in the middle of asm includes. Fix this up with the aid of the below script and manual adjustments here and there. import sys import re if len(sys.argv) is not 3: print "USAGE: %s <file> <header>" % (sys.argv[0]) sys.exit(1) hdr_to_move="#include <linux/%s>" % sys.argv[2] moved = False in_hdrs = False with open(sys.argv[1], "r") as f: lines = f.readlines() for _line in lines: line = _line.rstrip(' ') if line == hdr_to_move: continue if line.startswith("#include <linux/"): in_hdrs = True elif not moved and in_hdrs: moved = True print hdr_to_move print line Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mm: introduce include/linux/pgtable.hMike Rapoport2020-06-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The include/linux/pgtable.h is going to be the home of generic page table manipulation functions. Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and make the latter include asm/pgtable.h. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* powerpc/64s: Save FSCR to init_task.thread.fscr after feature initMichael Ellerman2020-06-021-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At boot the FSCR is initialised via one of two paths. On most systems it's set to a hard coded value in __init_FSCR(). On newer skiboot systems we use the device tree CPU features binding, where firmware can tell Linux what bits to set in FSCR (and HFSCR). In both cases the value that's configured at boot is not propagated into the init_task.thread.fscr value prior to the initial fork of init (pid 1), which means the value is not used by any processes other than swapper (the idle task). For the __init_FSCR() case this is OK, because the value in init_task.thread.fscr is initialised to something sensible. However it does mean that the value set in __init_FSCR() is not used other than for swapper, which is odd and confusing. The bigger problem is for the device tree CPU features case it prevents firmware from setting (or clearing) FSCR bits for use by user space. This means all existing kernels can not have features enabled/disabled by firmware if those features require setting/clearing FSCR bits. We can handle both cases by saving the FSCR value into init_task.thread.fscr after we have initialised it at boot. This fixes the bug for device tree CPU features, and will allow us to simplify the initialisation for the __init_FSCR() case in a future patch. Fixes: 5a61ef74f269 ("powerpc/64s: Support new device tree binding for discovering CPU features") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200527145843.2761782-3-mpe@ellerman.id.au
* powerpc/kernel: Enables memory hot-remove after reboot on pseries guestsLeonardo Bras2020-06-021-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While providing guests, it's desirable to resize it's memory on demand. By now, it's possible to do so by creating a guest with a small base memory, hot-plugging all the rest, and using 'movable_node' kernel command-line parameter, which puts all hot-plugged memory in ZONE_MOVABLE, allowing it to be removed whenever needed. But there is an issue regarding guest reboot: If memory is hot-plugged, and then the guest is rebooted, all hot-plugged memory goes to ZONE_NORMAL, which offers no guaranteed hot-removal. It usually prevents this memory to be hot-removed from the guest. It's possible to use device-tree information to fix that behavior, as it stores flags for LMB ranges on ibm,dynamic-memory-vN. It involves marking each memblock with the correct flags as hotpluggable memory, which mm/memblock.c puts in ZONE_MOVABLE during boot if 'movable_node' is passed. For carrying such information, the new flag DRCONF_MEM_HOTREMOVABLE was proposed and accepted into Power Architecture documentation. This flag should be: - true (b=1) if the hypervisor may want to hot-remove it later, and - false (b=0) if it does not care. During boot, guest kernel reads the device-tree, early_init_drmem_lmb() is called for every added LMBs. Here, checking for this new flag and marking memblocks as hotplugable memory is enough to get the desirable behavior. This should cause no change if 'movable_node' parameter is not passed in kernel command-line. Signed-off-by: Leonardo Bras <leonardo@linux.ibm.com> Reviewed-by: Bharata B Rao <bharata@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200402195156.626430-1-leonardo@linux.ibm.com
* powerpc: Replace _ALIGN_UP() by ALIGN()Christophe Leroy2020-05-111-2/+2
| | | | | | | | | | | | _ALIGN_UP() is specific to powerpc ALIGN() is generic and does the same Replace _ALIGN_UP() by ALIGN() Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/8a6d7e45f7904c73a0af539642d3962e2a3c7268.1587407777.git.christophe.leroy@c-s.fr
* powerpc: Replace _ALIGN_DOWN() by ALIGN_DOWN()Christophe Leroy2020-05-111-3/+3
| | | | | | | | | | | | _ALIGN_DOWN() is specific to powerpc ALIGN_DOWN() is generic and does the same Replace _ALIGN_DOWN() by ALIGN_DOWN() Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/3911a86d6b5bfa7ad88cd7c82416fbe6bb47e793.1587407777.git.christophe.leroy@c-s.fr
* powerpc/fadump: add support to preserve crash data on FADUMP disabled kernelHari Bathini2019-09-141-2/+2
| | | | | | | | | | | | | | | | | | | | Add a new kernel config option, CONFIG_PRESERVE_FA_DUMP that ensures that crash data, from previously crash'ed kernel, is preserved. This helps in cases where FADump is not enabled but the subsequent memory preserving kernel boot is likely to process this crash data. One typical usecase for this config option is petitboot kernel. As OPAL allows registering address with it in the first kernel and retrieving it after MPIPL, use it to store the top of boot memory. A kernel that intends to preserve crash data retrieves it and avoids using memory beyond this address. Move arch_reserved_kernel_pages() function as it is needed for both FA_DUMP and PRESERVE_FA_DUMP configurations. Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/156821375751.5656.11459483669542541602.stgit@hbathini.in.ibm.com
* powerpc/powernv: Introduce FW_FEATURE_ULTRAVISORClaudio Carvalho2019-08-301-0/+4
| | | | | | | | | | | | | | | | | In PEF enabled systems, some of the resources which were previously hypervisor privileged are now ultravisor privileged and controlled by the ultravisor firmware. This adds FW_FEATURE_ULTRAVISOR to indicate if PEF is enabled. The host kernel can use FW_FEATURE_ULTRAVISOR, for instance, to skip accessing resources (e.g. PTCR and LDBAR) in case PEF is enabled. Signed-off-by: Claudio Carvalho <cclaudio@linux.ibm.com> [ andmike: Device node name to "ibm,ultravisor" ] Signed-off-by: Michael Anderson <andmike@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190822034838.27876-4-cclaudio@linux.ibm.com
* treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner2019-05-301-5/+1
| | | | | | | | | | | | | | | | | | | | | Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc: use memblock functions returning virtual addressChristophe Leroy2019-03-121-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since only the virtual address of allocated blocks is used, lets use functions returning directly virtual address. Those functions have the advantage of also zeroing the block. [rppt@linux.ibm.com: powerpc: remove duplicated alloc_stack() function] Link: http://lkml.kernel.org/r/20190226064032.GA5873@rapoport-lnx [rppt@linux.ibm.com: updated error message in alloc_stack() to be more verbose] [rppt@linux.ibm.com: convereted several additional call sites ] Link: http://lkml.kernel.org/r/1548057848-15136-3-git-send-email-rppt@linux.ibm.com Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* powerpc/prom: move the device tree if not in declared memory.Christophe Leroy2018-12-201-2/+2
| | | | | | | | | If the device tree doesn't reside in the memory which is declared inside it, it has to be moved as well as this memory will not be mapped by the kernel. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/prom: fix early DEBUG messagesChristophe Leroy2018-12-201-3/+3
| | | | | | | | | | This patch fixes early DEBUG messages in prom.c: - Use %px instead of %p to see the addresses - Cast memblock_phys_mem_size() with (unsigned long long) to avoid build failure when phys_addr_t is not 64 bits. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* memblock: rename memblock_alloc{_nid,_try_nid} to memblock_phys_alloc*Mike Rapoport2018-10-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make it explicit that the caller gets a physical address rather than a virtual one. This will also allow using meblock_alloc prefix for memblock allocations returning virtual address, which is done in the following patches. The conversion is done using the following semantic patch: @@ expression e1, e2, e3; @@ ( - memblock_alloc(e1, e2) + memblock_phys_alloc(e1, e2) | - memblock_alloc_nid(e1, e2, e3) + memblock_phys_alloc_nid(e1, e2, e3) | - memblock_alloc_try_nid(e1, e2, e3) + memblock_phys_alloc_try_nid(e1, e2, e3) ) Link: http://lkml.kernel.org/r/1536927045-23536-7-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* powerpc: clean the inclusion of stringify.hChristophe Leroy2018-07-301-1/+0
| | | | | | | Only include linux/stringify.h is files using __stringify() Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/mm: Check memblock_add against MAX_PHYSMEM_BITS rangeAneesh Kumar K.V2018-07-241-3/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With SPARSEMEM config enabled, we make sure that we don't add sections beyond MAX_PHYSMEM_BITS range. This results in not building vmemmap mapping for range beyond max range. But our memblock layer looks the device tree and create mapping for the full memory range. Prevent this by checking against MAX_PHSYSMEM_BITS when doing memblock_add. We don't do similar check for memeblock_reserve_range. If reserve range is beyond MAX_PHYSMEM_BITS we expect that to be configured with 'nomap'. Any other reserved range should come from existing memblock ranges which we already filtered while adding. This avoids crash as below when running on a system with system ram config above MAX_PHSYSMEM_BITS Unable to handle kernel paging request for data at address 0xc00a001000000440 Faulting instruction address: 0xc000000001034118 cpu 0x0: Vector: 300 (Data Access) at [c00000000124fb30] pc: c000000001034118: __free_pages_bootmem+0xc0/0x1c0 lr: c00000000103b258: free_all_bootmem+0x19c/0x22c sp: c00000000124fdb0 msr: 9000000002001033 dar: c00a001000000440 dsisr: 40000000 current = 0xc00000000120dd00 paca = 0xc000000001f60000^I irqmask: 0x03^I irq_happened: 0x01 pid = 0, comm = swapper [c00000000124fe20] c00000000103b258 free_all_bootmem+0x19c/0x22c [c00000000124fee0] c000000001010a68 mem_init+0x3c/0x5c [c00000000124ff00] c00000000100401c start_kernel+0x298/0x5e4 [c00000000124ff90] c00000000000b57c start_here_common+0x1c/0x520 Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/prom: Drop support for old FDT versionsMichael Ellerman2018-05-111-19/+4
| | | | | | | | | | | In commit e6a6928c3ea1 ("of/fdt: Convert FDT functions to use libfdt") (Apr 2014), the generic flat device tree code dropped support for flat device tree's older than version 0x10 (16). We still have code in our CPU scanning to cope with flat device tree versions earlier than 2, which can now never trigger, so drop it. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* Merge branch 'topic/paca' into nextMichael Ellerman2018-03-311-2/+13
|\ | | | | | | | | | | | | | | Bring in yet another series that touches KVM code, and might need to be merged into the kvm-ppc branch to resolve conflicts. This required some changes in pnv_power9_force_smt4_catch/release() due to the paca array becomming an array of pointers.
| * powerpc/64: Defer paca allocation until memory topology is discoveredNicholas Piggin2018-03-301-2/+3
| | | | | | | | | | | | Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Rename the dummy allocate_pacas() to fix 32-bit build] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
View Lorry Controller Status