summaryrefslogtreecommitdiff
path: root/drivers/acpi/ec.c
Commit message (Collapse)AuthorAgeFilesLines
* ACPI / EC: Clear stale EC events on Samsung systemsKieran Clancy2014-03-061-0/+64
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A number of Samsung notebooks (530Uxx/535Uxx/540Uxx/550Pxx/900Xxx/etc) continue to log events during sleep (lid open/close, AC plug/unplug, battery level change), which accumulate in the EC until a buffer fills. After the buffer is full (tests suggest it holds 8 events), GPEs stop being triggered for new events. This state persists on wake or even on power cycle, and prevents new events from being registered until the EC is manually polled. This is the root cause of a number of bugs, including AC not being detected properly, lid close not triggering suspend, and low ambient light not triggering the keyboard backlight. The bug also seemed to be responsible for performance issues on at least one user's machine. Juan Manuel Cabo found the cause of bug and the workaround of polling the EC manually on wake. The loop which clears the stale events is based on an earlier patch by Lan Tianyu (see referenced attachment). This patch: - Adds a function acpi_ec_clear() which polls the EC for stale _Q events at most ACPI_EC_CLEAR_MAX (currently 100) times. A warning is logged if this limit is reached. - Adds a flag EC_FLAGS_CLEAR_ON_RESUME which is set to 1 if the DMI system vendor is Samsung. This check could be replaced by several more specific DMI vendor/product pairs, but it's likely that the bug affects more Samsung products than just the five series mentioned above. Further, it should not be harmful to run acpi_ec_clear() on systems without the bug; it will return immediately after finding no data waiting. - Runs acpi_ec_clear() on initialisation (boot), from acpi_ec_add() - Runs acpi_ec_clear() on wake, from acpi_ec_unblock_transactions() References: https://bugzilla.kernel.org/show_bug.cgi?id=44161 References: https://bugzilla.kernel.org/show_bug.cgi?id=45461 References: https://bugzilla.kernel.org/show_bug.cgi?id=57271 References: https://bugzilla.kernel.org/attachment.cgi?id=126801 Suggested-by: Juan Manuel Cabo <juanmanuel.cabo@gmail.com> Signed-off-by: Kieran Clancy <clancy.kieran@gmail.com> Reviewed-by: Lan Tianyu <tianyu.lan@intel.com> Reviewed-by: Dennis Jansen <dennis.jansen@web.de> Tested-by: Kieran Clancy <clancy.kieran@gmail.com> Tested-by: Juan Manuel Cabo <juanmanuel.cabo@gmail.com> Tested-by: Dennis Jansen <dennis.jansen@web.de> Tested-by: Maurizio D'Addona <mauritiusdadd@gmail.com> Tested-by: San Zamoyski <san@plusnet.pl> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
*-. Merge branches 'acpi-gpe', 'acpi-video', 'acpi-thermal', 'acpi-processor', ↵Rafael J. Wysocki2014-01-121-1/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'acpi-sleep' * acpi-gpe: ACPI / EC: disable GPE before removing GPE handler ACPI / Button: Fix enabling button GPEs twice * acpi-video: ACPI: Blacklist Win8 OSI for some HP laptop 2013 models ACPI / video: Fix typo in video_detect.c * acpi-thermal: ACPI / thermal: remove const from thermal_zone_device_ops declaration * acpi-processor: ACPI / scan: bail out early if failed to parse APIC ID for CPU * acpi-sleep: ACPI / sleep: remove panic in case hardware has changed after S4
| * | ACPI / EC: disable GPE before removing GPE handlerLan Tianyu2013-12-191-1/+1
| |/ | | | | | | | | | | | | | | | | Adjust the order of disabling the EC GPE and removing its handler to avoid unhandled events. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> [rjw: Changelog] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | ACPI / EC: Remove unused functions and add prototype declaration in internal.hRashika2014-01-061-25/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds the prototype declarations of functions acpi_ec_add_query_handler() and acpi_ec_remove_query_handler() in header file internal.h and removes unused functions ec_burst_enable() and ec_burst_disable() in ec.c. This eliminates the following warnings in ec.c: drivers/acpi/ec.c:393:5: warning: no previous prototype for ‘ec_burst_enable’ [-Wmissing-prototypes] drivers/acpi/ec.c:402:5: warning: no previous prototype for ‘ec_burst_disable’ [-Wmissing-prototypes] drivers/acpi/ec.c:531:5: warning: no previous prototype for ‘acpi_ec_add_query_handler’ [-Wmissing-prototypes] drivers/acpi/ec.c:552:6: warning: no previous prototype for ‘acpi_ec_remove_query_handler’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | ACPI: Clean up inclusions of ACPI header filesLv Zheng2013-12-071-3/+2
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* Merge branch 'acpi-ec'Rafael J. Wysocki2013-11-191-1/+2
|\ | | | | | | | | * acpi-ec: ACPI / EC: Ensure lock is acquired before accessing ec struct members
| * ACPI / EC: Ensure lock is acquired before accessing ec struct membersPuneet Kumar2013-11-151-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A bug was introduced by commit b76b51ba0cef ('ACPI / EC: Add more debug info and trivial code cleanup') that erroneously caused the struct member to be accessed before acquiring the required lock. This change fixes it by ensuring the lock acquisition is done first. Found by Aaron Durbin <adurbin@chromium.org> Fixes: b76b51ba0cef ('ACPI / EC: Add more debug info and trivial code cleanup') References: http://crbug.com/319019 Signed-off-by: Puneet Kumar <puneetster@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> [olof: Commit message reworded a bit] Signed-off-by: Olof Johansson <olof@lixom.net> Cc: 3.8+ <stable@vger.kernel.org> # 3.8+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | ACPI / EC: Convert all printk() calls to dynamic debug functionLan Tianyu2013-09-251-25/+24
|/ | | | | | | | This patch is to convert all printks in the ec driver to pr_debug/info/err and define pr_fmt macro to replace PREFIX. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* Merge branch 'acpi-assorted'Rafael J. Wysocki2013-08-301-0/+4
|\ | | | | | | | | | | * acpi-assorted: ACPI / EC: Add ASUSTEK L4R to quirk list in order to validate ECDT ACPI / thermal: Add check of "_TZD" availability and evaluating result
| * ACPI / EC: Add ASUSTEK L4R to quirk list in order to validate ECDTLan Tianyu2013-08-281-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ECDT of ASUSTEK L4R doesn't provide correct command and data I/O ports. The DSDT provides the correct information instead. For this reason, add this machine to quirk list for ECDT validation and use the EC information from the DSDT. [rjw: Changelog] References: https://bugzilla.kernel.org/show_bug.cgi?id=60765 Reported-and-tested-by: Daniele Esposti <expo@expobrain.net> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Cc: All <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | Merge branch 'acpi-assorted'Rafael J. Wysocki2013-08-271-1/+1
|\ \ | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * acpi-assorted: ACPI / osl: Kill macro INVALID_TABLE(). earlycpio.c: Fix the confusing comment of find_cpio_data(). ACPI / x86: Print Hot-Pluggable Field in SRAT. ACPI / thermal: Use THERMAL_TRIPS_NONE macro to replace number ACPI / thermal: Remove unused macros in the driver/acpi/thermal.c ACPI / thermal: Remove the unused lock of struct acpi_thermal ACPI / osl: Fix osi_setup_entries[] __initdata attribute location ACPI / numa: Fix __init attribute location in slit_valid() ACPI / dock: Fix __init attribute location in find_dock_and_bay() ACPI / Sleep: Fix incorrect placement of __initdata ACPI / processor: Fix incorrect placement of __initdata ACPI / EC: Fix incorrect placement of __initdata ACPI / scan: Drop unnecessary label from acpi_create_platform_device() ACPI: Move acpi_bus_get_device() from bus.c to scan.c ACPI / scan: Allow platform device creation without any IO resources ACPI: Cleanup sparse warning on acpi_os_initialize1() platform / thinkpad: Remove deprecated hotkey_report_mode parameter ACPI: Remove the old /proc/acpi/event interface
| * ACPI / EC: Fix incorrect placement of __initdataSachin Kamat2013-08-071-1/+1
| | | | | | | | | | | | | | | | __initdata should be placed between the variable name and equal sign for the variable to be placed in the intended section. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | ACPI: introduce helper function acpi_has_method()Jiang Liu2013-07-151-3/+1
|/ | | | | | | | | Introduce helper function acpi_has_method() and use it in a number of places to simplify code. [rjw: Changelog] Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* ACPI / EC: Add HP Folio 13 to ec_dmi_table in order to skip DSDT scanLan Tianyu2013-06-271-0/+4
| | | | | | | | | | | | | HP Folio 13's BIOS defines CMOS RTC Operation Region and the EC's _REG method will access that region. To allow the CMOS RTC region handler to be installed before the EC _REG method is first invoked, add ec_skip_dsdt_scan() as HP Folio 13's callback to ec_dmi_table. References: https://bugzilla.kernel.org/show_bug.cgi?id=54621 Reported-and-tested-by: Stefan Nagy <public@stefan-nagy.at> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Cc: 3.9+ <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* ACPI / EC: Restart transaction even when the IBF flag setLan Tianyu2013-05-121-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | The EC driver works abnormally with IBF flag always set. IBF means "The host has written a byte of data to the command or data port, but the embedded controller has not yet read it". If IBF is set in the EC status and not cleared, this will cause all subsequent EC requests to fail with a timeout error. Change the EC driver so that it doesn't refuse to restart a transaction if IBF is set in the status. Also increase the number of transaction restarts to 5, as it turns out that 2 is not sufficient in some cases. This bug happens on several different machines (Asus V1S, Dell Latitude E6530, Samsung R719, Acer Aspire 5930G, Sony Vaio SR19VN and others). [rjw: Changelog] References: https://bugzilla.kernel.org/show_bug.cgi?id=14733 References: https://bugzilla.kernel.org/show_bug.cgi?id=15560 References: https://bugzilla.kernel.org/show_bug.cgi?id=15946 References: https://bugzilla.kernel.org/show_bug.cgi?id=42945 References: https://bugzilla.kernel.org/show_bug.cgi?id=48221 Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Cc: All <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* ACPI: Remove useless type argument of driver .remove() operationRafael J. Wysocki2013-01-261-1/+1
| | | | | | | | | | | | | The second argument of ACPI driver .remove() operation is only used by the ACPI processor driver and the value passed to that driver through it is always available from the given struct acpi_device object's removal_type field. For this reason, the second ACPI driver .remove() argument is in fact useless, so drop it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Jiang Liu <jiang.liu@huawei.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
* ACPI / EC: Don't count a SCI interrupt as a false oneFeng Tang2012-11-151-2/+6
| | | | | | | | | | | | | Currently when advance_transaction() is called in EC interrupt handler, if there is nothing driver can do with the interrupt, it will be taken as a false one. But this is not always true, as there may be a SCI EC interrupt fired during normal read/write operation, which should not be counted as a false one. This patch fixes the problem. Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* ACPI / EC: Add more debug info and trivial code cleanupFeng Tang2012-11-151-16/+21
| | | | | | | | Add more debug info for EC transaction debugging, like the interrupt status register value, the detail info of a EC transaction. Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* ACPI / EC: Cleanup the member name for spinlock/mutex in structFeng Tang2012-11-151-26/+26
| | | | | | | | | | | | | | | | | | | | Current member names for mutex/spinlock are a little confusing. Change the { struct mutex lock; spinlock_t curr_lock; } to { struct mutex mutex; spinlock_t lock; } So that the code is cleaner and easier to read. Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* ACPI: EC: Add a quirk for CLEVO M720T/M730T laptopFeng Tang2012-10-061-1/+15
| | | | | | | | | | | | By enlarging the GPE storm threshold back to 20, that laptop's EC works fine with interrupt mode instead of polling mode. https://bugzilla.kernel.org/show_bug.cgi?id=45151 Reported-and-Tested-by: Francesco <trentini@dei.unipd.it> Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> cc: stable@vger.kernel.org
* ACPI: EC: Make the GPE storm threshold a module parameterFeng Tang2012-10-061-4/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | The Linux EC driver includes a mechanism to detect GPE storms, and switch from interrupt-mode to polling mode. However, polling mode sometimes doesn't work, so the workaround is problematic. Also, different systems seem to need the threshold for detecting the GPE storm at different levels. ACPI_EC_STORM_THRESHOLD was initially 20 when it's created, and was changed to 8 in 2.6.28 commit 06cf7d3c7 "ACPI: EC: lower interrupt storm threshold" to fix kernel bug 11892 by forcing the laptop in that bug to work in polling mode. However in bug 45151, it works fine in interrupt mode if we lift the threshold back to 20. This patch makes the threshold a module parameter so that user has a flexible option to debug/workaround this issue. The default is unchanged. This is also a preparation patch to fix specific systems: https://bugzilla.kernel.org/show_bug.cgi?id=45151 Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> cc: stable@vger.kernel.org
* Merge branch 'release' of ↵Linus Torvalds2012-03-301-4/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull ACPI & Power Management changes from Len Brown: - ACPI 5.0 after-ripples, ACPICA/Linux divergence cleanup - cpuidle evolving, more ARM use - thermal sub-system evolving, ditto - assorted other PM bits Fix up conflicts in various cpuidle implementations due to ARM cpuidle cleanups (ARM at91 self-refresh and cpu idle code rewritten into "standby" in asm conflicting with the consolidation of cpuidle time keeping), trivial SH include file context conflict and RCU tracing fixes in generic code. * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (77 commits) ACPI throttling: fix endian bug in acpi_read_throttling_status() Disable MCP limit exceeded messages from Intel IPS driver ACPI video: Don't start video device until its associated input device has been allocated ACPI video: Harden video bus adding. ACPI: Add support for exposing BGRT data ACPI: export acpi_kobj ACPI: Fix logic for removing mappings in 'acpi_unmap' CPER failed to handle generic error records with multiple sections ACPI: Clean redundant codes in scan.c ACPI: Fix unprotected smp_processor_id() in acpi_processor_cst_has_changed() ACPI: consistently use should_use_kmap() PNPACPI: Fix device ref leaking in acpi_pnp_match ACPI: Fix use-after-free in acpi_map_lsapic ACPI: processor_driver: add missing kfree ACPI, APEI: Fix incorrect APEI register bit width check and usage Update documentation for parameter *notrigger* in einj.txt ACPI, APEI, EINJ, new parameter to control trigger action ACPI, APEI, EINJ, limit the range of einj_param ACPI, APEI, Fix ERST header length check cpuidle: power_usage should be declared signed integer ...
| * ACPI: ec: Do request_region outside WARN()Andi Kleen2012-03-301-4/+4
| | | | | | | | | | | | | | | | WARN() is not supposed to have side effects, so move the request_regions outside. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* | ACPI: EC: Add ec_get_handle()Seth Forshee2012-03-201-0/+10
|/ | | | | | | | | toshiba_acpi needs to execute an AML method within the EC namespace to make hotkeys work on some platforms. Provide an interface to allow it to easily get a handle to the EC namespace for this purpose. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
* Merge branch 'ec-cleanup' into releaseLen Brown2011-05-291-7/+1
|\ | | | | | | | | Conflicts: drivers/platform/x86/compal-laptop.c
| * ACPI EC: remove redundant codeZhang Rui2011-05-291-2/+0
| | | | | | | | | | | | | | ec->handle is set in ec_parse_device(), so don't bother to set it again. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
| * ACPI EC: remove dead codeThomas Renninger2011-04-011-5/+1
| | | | | | | | | | | | | | | | | | | | | | static void acpi_ec_gpe_query(void *ec_cxt); -> The function is right above this declaration -> not needed. poll_force is also not used, cleaned up in ec.c and its users: compal-laptop and msi-laptop. Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
| |
| \
*-. \ Merge branches 'acpica', 'aml-custom', 'bugzilla-16548', 'bugzilla-20242', ↵Len Brown2011-05-291-0/+11
|\ \ \ | |_|/ |/| | | | | 'd3-cold', 'ec-asus' and 'thermal-fix' into release
| | * ACPI: EC: add another DMI check for ASUS hardwarePeter Collingbourne2011-04-251-0/+3
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 0adf3c746a73684b3f8c2821a584e1db998f61e9 introduced a regression by making the ECDT validation test for ASUS hardware more restrictive. The previous test used the dmi_name_in_vendors function which searches a number of DMI fields, while the new test checked only the BIOS vendor, which is known to not match on an ASUS F5GL laptop which requires ECDT validation. Add a rule to ec_dmi_table based on an alternative DMI pattern for ASUS hardware as found elsewhere in the kernel. Signed-off-by: Peter Collingbourne <peter@pcc.me.uk> Signed-off-by: Len Brown <len.brown@intel.com>
| * ACPI EC: enable MSI workaround for Quanta laptopsZhang Rui2011-05-291-0/+8
|/ | | | | | | | | Enable MSI workaround for Quanta laptops. https://bugzilla.kernel.org/show_bug.cgi?id=20242 Tested-by: Jan-Matthias Braun <jan_braun@gmx.net> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* ACPICA: Implicit notify supportLin Ming2011-01-121-1/+1
| | | | | | | | | | | | This feature provides an automatic device notification for wake devices when a wakeup GPE occurs and there is no corresponding GPE method or handler. Rather than ignoring such a GPE, an implicit AML Notify operation is performed on the parent device object. This feature is not part of the ACPI specification and is provided for Windows compatibility only. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* ACPICA: New GPE handler callback definitionLin Ming2011-01-121-1/+2
| | | | | | | | | | | The new GPE handler callback has 2 additional parameters, gpe_device and gpe_number. typedef u32 (*acpi_gpe_handler) (acpi_handle gpe_device, u32 gpe_number, void *context); Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* ACPI: EC: Add another dmi match entry for MSI hardwareAlexey Starikovskiy2010-12-091-0/+3
| | | | | | | | http://bugzilla.kernel.org/show_bug.cgi?id=15418 Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> cc: stable@kernel.org Signed-off-by: Len Brown <len.brown@intel.com>
* ACPI: Make Embedded Controller command timeout delay configurableThomas Renninger2010-10-221-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Here and then there show up machines which need higher timeout values. Finding this on affected machines can be cumbersome, because ACPI_EC_DELAY is a compile option -> make it configurable via boot param. This can even be provided writable at runtime via: /sys/modules/acpi/parameters/ec_delay Known machines where this helps: Some HP machines where for whatever reasons specific EC accesses take very long at resume from S3 (in _WAK function). The AE_TIME error is passed upwards and the ACPI interpreter will not execute the rest of the _WAK function which results in not properly initialized devices/variables with different side-effects. Afaik, on some MSI machines this helped as well. If this param is needed there probably are underlying problems like: - EC firmware bug - A kernel EC driver bug - An ACPI interpreter behavior (e.g. timings when specific EC accesses happen and how) which the EC does not like - ... which should get evaluated further, but often are nasty or impossible to fix from OS side. Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
* Merge branch 'acpica' of ↵Linus Torvalds2010-08-071-32/+7
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'acpica' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (27 commits) ACPI / ACPICA: Simplify acpi_ev_initialize_gpe_block() ACPI / ACPICA: Fail acpi_gpe_wakeup() if ACPI_GPE_CAN_WAKE is unset ACPI / ACPICA: Do not execute _PRW methods during initialization ACPI: Fix bogus GPE test in acpi_bus_set_run_wake_flags() ACPICA: Update version to 20100702 ACPICA: Fix for Alias references within Package objects ACPICA: Fix lint warning for 64-bit constant ACPICA: Remove obsolete GPE function ACPICA: Update debug output components ACPICA: Add support for WDDT - Watchdog Descriptor Table ACPICA: Drop acpi_set_gpe ACPICA: Use low-level GPE enable during GPE block initialization ACPI / EC: Do not use acpi_set_gpe ACPI / EC: Drop suspend and resume routines ACPICA: Remove wakeup GPE reference counting which is not used ACPICA: Introduce acpi_gpe_wakeup() ACPICA: Rename acpi_hw_gpe_register_bit ACPICA: Update version to 20100528 ACPICA: Add signatures for undefined tables: ATKG, GSCI, IEIT ACPICA: Optimization: Reduce the number of namespace walks ...
| * ACPI / EC: Do not use acpi_set_gpeRafael J. Wysocki2010-07-061-11/+4
| | | | | | | | | | | | | | | | | | | | The EC driver is the last user of acpi_set_gpe() and since it is guaranteed that the EC GPE will not be shared, acpi_disable_gpe() and acpi_enable_gpe() may be used for disabling the GPE temporarilty if a GPE storm is detected and re-enabling it during EC transactions. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
| * ACPI / EC: Drop suspend and resume routinesRafael J. Wysocki2010-07-061-18/+0
| | | | | | | | | | | | | | | | | | | | The suspend and resume routines provided by the EC driver are not really necessary, because the handler of the GPE disabled by them is not going to be executed after suspend_device_irqs() and before resume_device_irqs() anyway. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
| * ACPICA: Remove wakeup GPE reference counting which is not usedRafael J. Wysocki2010-07-061-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After the previous patch that introduced acpi_gpe_wakeup() and modified the ACPI suspend and wakeup code to use it, the third argument of acpi_{enable|disable}_gpe() and the GPE wakeup reference counter are not necessary any more. Remove them and modify all of the users of acpi_{enable|disable}_gpe() accordingly. Also drop GPE type constants that aren't used any more. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* | acpi ec: Fix possible double io port registrationThomas Renninger2010-08-031-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | which will result in a harmless but ugly WARN message on some machines. Signed-off-by: Thomas Renninger <trenn@suse.de> CC: mjg59@srcf.ucam.org CC: platform-driver-x86@vger.kernel.org CC: linux-acpi@vger.kernel.org CC: astarikovskiy@suse.de CC: akpm@linux-foundation.org Signed-off-by: Matthew Garrett <mjg@redhat.com>
* | ACPI: Register EC io ports in /proc/ioportsThomas Renninger2010-08-031-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Formerly these have been exposed through /proc/.. Better register them where all IO ports should get registered and scream loud if someone else claims to use them. EC data and command port typically should show up like this then: ... 0060-0060 : keyboard 0062-0062 : EC data 0064-0064 : keyboard 0066-0066 : EC command 0070-0071 : rtc0 ... Signed-off-by: Thomas Renninger <trenn@suse.de> CC: Alexey Starikovskiy <astarikovskiy@suse.de> CC: Len Brown <lenb@kernel.org> CC: linux-kernel@vger.kernel.org CC: linux-acpi@vger.kernel.org CC: Bjorn Helgaas <bjorn.helgaas@hp.com> CC: platform-driver-x86@vger.kernel.org Signed-off-by: Matthew Garrett <mjg@redhat.com>
* | ACPI: Provide /sys/kernel/debug/ec/...Thomas Renninger2010-08-031-13/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch provides the same information through debugfs, which previously was provided through /proc/acpi/embedded_controller/*/info This is the gpe the EC is connected to and whether the global lock gets used. The io ports used are added to /proc/ioports in another patch. Beside the fact that /proc/acpi is deprecated for quite some time, this info is not needed for applications and thus can be moved to debugfs instead of a public interface like /sys. Signed-off-by: Thomas Renninger <trenn@suse.de> CC: Alexey Starikovskiy <astarikovskiy@suse.de> CC: Len Brown <lenb@kernel.org> CC: linux-kernel@vger.kernel.org CC: linux-acpi@vger.kernel.org CC: Bjorn Helgaas <bjorn.helgaas@hp.com> CC: platform-driver-x86@vger.kernel.org Signed-off-by: Matthew Garrett <mjg@redhat.com>
* | ACPI: Remove /proc/acpi/embedded_controller/..Thomas Renninger2010-08-031-80/+1
|/ | | | | | | | | | | | | | | | | | Other patches in this series add the same info to /sys/... and /proc/ioports. The info removed should never have been used in an application, eventually someone read it manually. /proc/acpi is deprecated for more than a year anyway... Signed-off-by: Thomas Renninger <trenn@suse.de> CC: Alexey Starikovskiy <astarikovskiy@suse.de> CC: Len Brown <lenb@kernel.org> CC: linux-kernel@vger.kernel.org CC: linux-acpi@vger.kernel.org CC: platform-driver-x86@vger.kernel.org Signed-off-by: Matthew Garrett <mjg@redhat.com>
* Merge branches 'bugzilla-14668' and 'misc-2.6.35' into releaseLen Brown2010-06-011-2/+1
|\
| * ACPI: EC: Use kmemdupJulia Lawall2010-05-201-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use kmemdup when some other buffer is immediately copied into the allocated region. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; statement S; @@ - to = \(kmalloc\|kzalloc\)(size,flag); + to = kmemdup(from,size,flag); if (to==NULL || ...) S - memcpy(to, from, size); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
* | ACPI / EC / PM: Fix names of functions that block/unblock EC transactionsRafael J. Wysocki2010-05-281-8/+8
| | | | | | | | | | | | | | | | | | | | | | The names of the functions used for blocking/unblocking EC transactions during suspend/hibernation suggest that the transactions are suspended and resumed by them, while in fact they are disabled and enabled. Rename the functions (and the flag used by them) to better reflect what they really do. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
* | ACPI / EC / PM: Fix race between EC transactions and system suspendRafael J. Wysocki2010-05-281-0/+10
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There still is a race that may result in suspending the system in the middle of an EC transaction in progress, which leads to problems (like the kernel thinking that the ACPI global lock is held during resume while in fact it's not). To remove the race condition, modify the ACPI platform suspend and hibernate callbacks so that EC transactions are blocked right after executing the _PTS global control method and are allowed to happen again right after the low-level wakeup. Introduce acpi_pm_freeze() that will disable GPEs, wait until the event queues are empty and block EC transactions. Use it wherever GPEs are disabled in preparation for switching local interrupts off. Introduce acpi_pm_thaw() that will allow EC transactions to happen again and enable runtime GPEs. Use it to balance acpi_pm_freeze() wherever necessary. In addition to that use acpi_ec_resume_transactions_early() to unblock EC transactions as early as reasonably possible during resume. Also unblock EC transactions in acpi_hibernation_finish() and in the analogous suspend routine to make sure that the EC transactions are enabled in all error paths. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=14668 Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reported-and-tested-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
*-. Merge branches 'battery', 'bugzilla-14667', 'bugzilla-15096', ↵Len Brown2010-04-061-26/+10
|\ \ | | | | | | | | | 'bugzilla-15480', 'bugzilla-15521', 'bugzilla-15605', 'gpe-reference-counters', 'misc', 'pxm-fix' and 'video-random-key' into release
| | * include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-301-0/+1
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
| * ACPI: EC: Allow multibyte access to ECAlexey Starikovskiy2010-03-171-26/+9
|/ | | | | | | http://bugzilla.kernel.org/show_bug.cgi?id=14667 Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
*---. Merge branches 'battery-2.6.34', 'bugzilla-10805', 'bugzilla-14668', ↵Len Brown2010-03-141-55/+130
|\ \ \ | | | | | | | | | | | | 'bugzilla-531916-power-state', 'ht-warn-2.6.34', 'pnp', 'processor-rename', 'sony-2.6.34', 'suse-bugzilla-531547', 'tz-check', 'video' and 'misc-2.6.34' into release
View Lorry Controller Status