summaryrefslogtreecommitdiff
path: root/drivers/clk/clk-max77686.c
Commit message (Collapse)AuthorAgeFilesLines
* clk: max77686: fix number of clocks setup for clk_hw based registrationJavier Martinez Canillas2016-10-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | The commit 9b4cac33adc7 ("clk: max77686: Migrate to clk_hw based OF and registration APIs") converted the driver to use the new provider API to register clocks using clk_hw. But unfortunately, in the conversion it missed to set the num_clks value which lead to the following error when trying to register a clk provider: [ 1.963782] of_clk_max77686_get: invalid index 0 [ 1.967460] ERROR: could not get clock /rtc@10070000:rtc_src(1) [ 1.973638] s3c-rtc 10070000.rtc: failed to find rtc source clock Fix it by correctly set the max77686_clk_driver_data num_clks member. Fixes: 9b4cac33adc7 ("clk: max77686: Migrate to clk_hw based OF and registration APIs") Reported-by: Markus Reichl <m.reichl@fivetechno.de> Suggested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Markus Reichl <m.reichl@fivetechno.de> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
* clk: max77686: Migrate to clk_hw based OF and registration APIsStephen Boyd2016-08-181-21/+21
| | | | | | | | | | | | | | Now that we have clk_hw based provider APIs to register clks, we can get rid of struct clk pointers while registering clks in these drivers, allowing us to move closer to a clear split of consumer and provider clk APIs. Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Cc: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
* clk: max77686: Add support for MAX77620 clocksLaxman Dewangan2016-08-151-0/+18
| | | | | | | | | | | | | | | Maxim Max77620 has one 32KHz clock output and the clock HW IP used on this PMIC is same as what it is there in the MAX77686. Add clock driver support for MAX77620 on the MAX77686 driver. CC: Krzysztof Kozlowski <k.kozlowski@samsung.com> CC: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
* clk: max77686: Combine Maxim max77686 and max77802 driverLaxman Dewangan2016-08-151-12/+232
| | | | | | | | | | | | | | | | | | | | | | | | | | | The clock IP used on the Maxim PMICs max77686 and max77802 are same. The configuration of clock register is also same except the number of clocks. Part of common code utilisation, there is 3 files for these chips clock driver, one for common and two files for driver registration. Combine both drivers into single file and move common code into same common file reduces the 2 files and make max77686 and max77802 clock driver in single fine. This driver does not depends on the parent driver structure. The regmap handle is acquired through regmap APIs for the register access. This combination of driver helps on adding clock driver for different Maxim PMICs which has similar clock IP like MAX77620 and MAX20024. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> CC: Krzysztof Kozlowski <k.kozlowski@samsung.com> CC: Javier Martinez Canillas <javier@dowhile0.org> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
* clk: max77{686,802}: Remove CLK_IS_ROOTStephen Boyd2016-03-151-3/+0
| | | | | | | This flag is a no-op now. Remove usage of the flag. Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
* drivers/clk: include <module.h> for clk-max77xxx modular codePaul Gortmaker2015-06-161-0/+1
| | | | | | | | | | | | These files are built off of the tristate COMMON_CLK_MAX77686 and COMMON_CLK_MAX77802 respectively. They also contains modular function calls so they should explicitly include module.h to avoid compile breakage during header shuffles done in the future. Cc: Mike Turquette <mturquette@linaro.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* clk: Remove .owner field for driverKiran Padwal2014-09-251-1/+0
| | | | | | | | | | | | | | There is no need to init .owner field. Based on the patch from Peter Griffin <peter.griffin@linaro.org> "mmc: remove .owner field for drivers using module_platform_driver" This patch removes the superflous .owner field for drivers which use the module_platform_driver API, as this is overriden in platform_driver_register anyway." Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
* clk: max77686: Convert to the generic max clock driverJavier Martinez Canillas2014-09-091-168/+8
| | | | | | | | | | | | Clocks drivers for Maxim PMIC are very similar so they can be converted to use the generic Maxim clock driver. Also, while being there use module_platform_driver() helper macro to eliminate more boilerplate code. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
* clk: max77686: Add DT include for MAX77686 PMIC clockJavier Martinez Canillas2014-09-091-6/+1
| | | | | | | | | | | This patch adds a dt-binding include for Maxim 77686 PMIC clock IDs that can be used by both the max77686 clock driver and Device Tree source files. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
* clk: max77686: Register OF clock providerTomasz Figa2014-01-081-0/+24
| | | | | | | | | | | If max77686 chip is instantiated from device tree, it is desirable to have an OF clock provider to allow device tree based look-up of clocks. This patch adds OF clock provider registration to the clk-max77686 driver. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
* clk: max77686: Refactor driver data handlingTomasz Figa2014-01-081-13/+14
| | | | | | | | | | As a prerequisite for further patch adding OF clock provider support to the driver, this patch changes the driver to store an array of struct clk * as driver data. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
* clk: max77686: Fix clean-up in error and remove pathsTomasz Figa2014-01-081-19/+10
| | | | | | | | | | This patch fixes invalid kfree() and adds missing call to clk_unregister() in error and remove paths in max77686_clk_probe(). While at it, error handling is also cleaned up. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
* clk: max77686: Make max77686_clk_register() return struct clk *Tomasz Figa2014-01-081-7/+10
| | | | | | | | | | As a preparation for further patches, this patch modifies the clock registration helper function to return a pointer to the newly registered clock. No functional change is done to the driver. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
* clk: max77686: Refactor successful exit of probe functionTomasz Figa2014-01-081-2/+1
| | | | | | | | | | The function can simply return 0, without jumping to a separate label, which does exactly the same. This patch does not introduce any functional change, just a clean-up. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
* clk: max77686: Provide .recalc_rate() operationTomasz Figa2014-01-081-0/+7
| | | | | | | | | It is usually nice to know frequency of a clock, so this patch adds a .recalc_rate() callback returning rates of provided clocks. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
* clk: max77686: Correct callback used for checking clock statusTomasz Figa2014-01-081-2/+2
| | | | | | | | | | | Changing status of clock gates in max77686 requires i2c transfers, which can sleep, so this is done in prepare and unprepare callbacks. Due to this, checking whether whether the clock is ungated must be done in is_prepared() callback as well, for consistency. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
* clk: max77686: Remove redundant breakSachin Kamat2013-12-261-2/+0
| | | | | | | | 'break' after 'goto' is redundant. Remove it. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
* clk: max77686: Avoid double free at remove timeLaurent Pinchart2013-01-151-2/+1
| | | | | | | | | | | | The clk_lookup entry is dropped at remove time by a call to clkdev_drop(). That function frees the entry, which is also freed by the driver core as it has been allocated through devm_kzalloc(). This results in a double free. Use kzalloc() instead of devm_kzalloc() to fix this. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
* clk: max77686: Remove unnecessary NULL checking for container_of()Axel Lin2013-01-151-21/+7
| | | | | | | | container_of() never returns NULL, thus remove the NULL checking for it. Also rename get_max77686_clk() to to_max77686_clk() for better readability. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
* clk: max77686: Fix return value checking for devm_kzallocAxel Lin2013-01-111-3/+3
| | | | | | | devm_kzalloc returns NULL on failure. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
* clk: remove use of __devexitBill Pemberton2012-11-281-1/+1
| | | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Mike Turquette <mturquette@linaro.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: remove use of __devinitBill Pemberton2012-11-281-1/+1
| | | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Mike Turquette <mturquette@linaro.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: remove use of __devexit_pBill Pemberton2012-11-281-1/+1
| | | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Mike Turquette <mturquette@linaro.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clock: max77686: Add driver for Maxim 77686 32Khz crystal oscillator.Jonghwa Lee2012-09-061-0/+244
This patch supports max77686 mfd's clock driver using common clock frame work. max77686 has 3 clock ouputs which all are generated from crystal oscillator and SOC can enable/disable them via I2C bus. All clocks are fixed-rate clock sources so that it doesn't supply interface for changing clock rate. Driver uses regmap API to communicate with internal register. Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
View Lorry Controller Status