summaryrefslogtreecommitdiff
path: root/drivers/hid/Makefile
Commit message (Collapse)AuthorAgeFilesLines
* HID: roccat: add support for Ryos MK keyboardsStefan Achatz2013-10-301-1/+1
| | | | | | | Added support for 3 keyboards with increasing illumination capabilities Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: Add new driver for non-compliant Xin-Mo devices.Olivier Scherler2013-07-291-0/+1
| | | | | | | | | | The driver currently only supports the Dual Arcade controller. It fixes the negative axis event values (the devices sends -2) to match the logical axis minimum of the HID report descriptor (the report announces -1). It is needed because hid-input discards out of bounds values. Signed-off-by: Olivier Scherler <oscherler@ithink.ch> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
*-. Merge branches 'for-3.11/wacom-fixed' and 'for-3.11/wiimote' into for-linusJiri Kosina2013-07-041-4/+1
|\ \
| | * HID: wiimote: remove old static extension supportDavid Herrmann2013-06-031-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | We now have dynamic hotplug support so the old static extensions are no longer needed nor used. Remove it along CONFIG_HID_WIIMOTE_EXT. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * HID: wiimote: add sub-device module infrastructureDavid Herrmann2013-06-031-1/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To avoid loading all sub-device drivers for every Wii Remote, even though the required hardware might not be available, we introduce a module layer. The module layer specifies which sub-devices are available on each device-type. After device detection, we only load the modules for the detected device. If module loading fails, we unload everything and mark the device as WIIMOTE_DEV_UNKNOWN. As long as a device is marked as "unknown", no sub-devices will be used and the device is considered unsupported. All the different sub-devices, including KEYS, RUMBLE, BATTERY, LEDS, ACCELEROMETER, IR and more will be ported in follow-up patches to the new module layer. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| |
| \
| \
| \
*---. \ Merge branches 'for-3.11/multitouch', 'for-3.11/sony' and ↵Jiri Kosina2013-07-041-1/+1
|\ \ \ \ | | |_|/ | |/| | | | | | | | | | | | | | | | | | 'for-3.11/upstream' into for-linus Conflicts: drivers/hid/hid-core.c
| | | * HID: add support for Huion 580 tabletMartin Rusko2013-05-281-0/+1
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add hid-huion.c with support for Huion 580 tablet, which is simple 8x5" tablet with 4000LPI resolution and 2048 levels pressure-sensitive pen manufactured by the Chinese company Huion. The driver fixes incorrect report descriptor sent by the device, performs custom initialization required to switch the tablet into its native resolution mode and inverts the in-range bit. Signed-off-by: Martin Rusko <martin.rusko@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * HID: fold ps3remote driver into generic Sony driverJiri Kosina2013-06-131-1/+0
| |/ | | | | | | | | | | | | | | | | | | Let's follow the structure we are trying to keep for most of the specific HID drivers, and let the separation follow the producing vendor. Merge functionality provided by ps3remote driver into hid-sony. Tested-by: David Dillow <dave@thedillows.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| |
| \
*-. \ Merge branches 'for-3.11/battery', 'for-3.11/elo', 'for-3.11/holtek' and ↵Jiri Kosina2013-07-041-0/+2
|\ \ \ | |_|/ |/| | | | | 'for-3.11/i2c-hid-fixed' into for-linus
| | * HID: Add driver for Holtek gaming mouse 04d9:a067Christian Ohm2013-05-281-0/+1
| |/ |/| | | | | | | | | | | | | | | This mouse is sold as Sharkoon Drakonia and Perixx MX-2000 and reports a too high usage maximum and logical maximum. This driver fixes the report descriptor so those values don't exceed HID_MAX_USAGES. Signed-off-by: Christian Ohm <chr.ohm@gmx.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * HID: add driver for ELO 4000/4500Jiri Slaby2013-05-291-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | This is a driver for ELO 4000/4500 devices which report themselves as HID devices, but do not really send HID events on touch. So we introduce a new HID 'quirk' driver with a raw_event handler where we take care of those events. What we need additionally is an input_configured hook, because the device does not mention anything about PRESSURE and TOUCH in its report descriptor, but it actually generate those. So we set the bits in the corresponding input_dev in that hook. Thanks to Petr Ostadal who was willing to test the driver. The rest of Cc's listed below had something to do with that driver over the years in our enterprise tree. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Tested-by: Petr Ostadal <postadal@suse.cz> Cc: Oliver Neukum <oliver@neukum.org> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Egbert Eich <eich@suse.com> Cc: Libor Pechacek <lpechacek@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
*-. Merge branches 'for-3.10/multitouch', 'for-3.10/roccat' and ↵Jiri Kosina2013-04-301-2/+2
|\ \ | | | | | | | | | | | | | | | | | | 'for-3.10/upstream' into for-linus Conflicts: drivers/hid/Kconfig
| * | HID: roccat: add support for Roccat Kone Pure gaming mouseStefan Achatz2013-03-141-2/+2
| |/ | | | | | | | | | | | | Userland-tools can already be found at http://sourceforge.net/projects/roccat Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | HID: appleir: add support for Apple ir devicesBenjamin Tissoires2013-04-181-0/+1
|/ | | | | | | | | | | | | | | | | This driver was originally written by James McKenzie, updated by Greg Kroah-Hartman, further updated by Bastien Nocera, with suspend support added. I ported it to the HID subsystem, in order to simplify it a litle and allow lirc to use it through hiddev. More recent versions of the IR receiver are also supported through a patch by Alex Karpenko. The patch also adds support for the 2nd and 5th generation of the controller, and the menu key on newer brushed metal remotes. Tested-by: Fabien André <fabien.andre@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
*-. Merge branches 'for-3.9/sony' and 'for-3.9/steelseries' into for-linusJiri Kosina2013-02-211-0/+1
|\ \ | | | | | | | | | | | | Conflicts: drivers/hid/hid-core.c
| | * HID: steelseries: rename driver to be compliant with other driversJiri Kosina2013-01-311-1/+1
| | | | | | | | | | | | | | | | | | | | | We usually group drivers on a per-vendor basis, implementing device-specific deviations from the standard in vendor-specific driver. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * USB: HID: SRW-S1 Gaming Wheel DriverSimon Wood2013-01-311-0/+1
| |/ | | | | | | | | | | | | | | | | | | Add support the SRW-S1 by patching HID descriptor to read axis as Generic Desktop X, Y and Z (rather than Usage page being 'Simulation'). Signed-off-by: Simon Wood <simon@mungewell.org> Tested-by: John Murphy <rosegardener@freeode.co.uk> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | HID: add ThingM blink(1) USB RGB LED supportVivien Didelot2013-02-191-0/+1
|/ | | | | | | | | | | | | | | | | | | | | The ThingM blink(1) is an open source hardware USB RGB LED. It contains an internal EEPROM, allowing to configure up to 12 light patterns. A light pattern is a RGB color plus a fade time. This driver registers a LED class instance with additional sysfs attributes to support basic functions such as setting RGB colors, fade and playing. Other functions are still accessible through the hidraw interface. At this time, the only documentation for the device is the firmware source code from ThingM, plus a few schematics. They are available at: https://github.com/todbot/blink1 This patch is version 3. It updates the name of the source file, the driver and the led sysfs entry, according to comments from Jiri Kosina and Simon Wood. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
*---. Merge branches 'for-3.7/upstream-fixes', 'for-3.8/hidraw', ↵Jiri Kosina2012-12-121-2/+4
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | 'for-3.8/i2c-hid', 'for-3.8/multitouch', 'for-3.8/roccat', 'for-3.8/sensors' and 'for-3.8/upstream' into for-linus Conflicts: drivers/hid/hid-core.c
| | | * HID: Add driver for ION iCadeBastien Nocera2012-10-311-0/+1
| |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a driver for the ION iCade mini arcade cabinet [1]. The device generates a key press and release for each joystick movement or button press or release. For example, moving the stick to the left will generate the "A" key being pressed and then released. A list of all the combinations is available in the iCade developer guide [2]. This driver hides all this and makes the device work as a generic joystick. [1]: http://www.ionaudio.com/products/details/icade [2]: http://www.ionaudio.com/downloads/iCade_Dev_Resource_v1.3.pdf Signed-off-by: Bastien Nocera <hadess@hadess.net> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * HID: roccat: add support for Roccat LuaStefan Achatz2012-10-171-2/+2
| |/ |/| | | | | | | | | | | | | | | This patch adds support for Roccat Lua gaming mouse. Userland tools can soon be found at http://sourceforge.net/projects/roccat Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * HID: i2c-hid: introduce HID over i2c specification implementationBenjamin Tissoires2012-11-191-0/+1
|/ | | | | | | | | | | | | | | | Microsoft published the protocol specification of HID over i2c: http://msdn.microsoft.com/en-us/library/windows/hardware/hh852380.aspx This patch introduces an implementation of this protocol. This implementation does not includes the ACPI part of the specification. This will come when ACPI 5.0 devices enumeration will be available. Once the ACPI part is done, OEM will not have to declare HID over I2C devices in their platform specific driver. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* Merge tag 'staging-3.6' of ↵Linus Torvalds2012-10-011-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging tree update from Greg Kroah-Hartman: "Here is the big staging tree update for the 3.7-rc1 merge window. There are a few patches in here that are outside of the staging area, namely HID and IIO patches, but all of them have been acked by the relevant subsystem maintainers. The IIO stuff is still coming in through this tree as it hasn't entirely moved out of the staging tree, but is almost there. Other than that, there wa a ton of work on the comedi drivers to make them more readable and the correct style. Doing that removed a lot of code, but we added a new driver to the staging tree, so we didn't end up with a net reduction this time around: 662 files changed, 51649 insertions(+), 26582 deletions(-) All of these patches have been in the linux-next tree already. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'staging-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1094 commits) staging: comedi: jr3_pci: fix iomem dereference staging: comedi: drivers: use comedi_fc.h cmdtest helpers Staging: winbond: usb_free_urb(NULL) is safe Staging: winbond: checkpatch cleanup Staging: winbond: Removed undesired spaces, lines and tabs Staging: winbond: Typo corrections in comments Staging: winbond: Changed c99 comments to c89 comments staging: r8712u: Do not queue cloned skb staging: comedi: ni_mio_common: always lock in ni_ai_poll() staging: comedi: s626: add FIXME comment staging: comedi: s626: don't dereference insn->data staging: comedi: s526: fix if() check in s526_gpct_winsn() staging: comedi: s626: cleanup comments in s626_initialize() staging: comedi: s626: remove clear of kzalloc'ed data staging: comedi: s626: remove 'WDInterval' from private data staging: comedi: s626: remove 'ChargeEnabled' from private data staging: comedi: s626: remove 'IsBoardRevA' comment staging: comedi: s626: #if 0 out the "SAA7146 BUG WORKAROUND" staging: comedi: s626: remove 'allocatedBuf' from private data staging: comedi: s626: add final attach message ...
| * HID: sensors: introduce sensor frameworksrinivas pandruvada2012-09-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adding processing for HID Sensor usage table as defined by HID 1.12, Request #: HUTRR39, dated 05 May, 2011. This driver uses HID driver framework to register, send and receive events. This uses MFD framework, so that actual processing for a specific usage id can be done in a different driver. For example an accelerometer driver can be a separate driver and use the interface provided by this driver to register for events. Signed-off-by: srinivas pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| |
| \
*-. \ Merge branches 'from-henrik', 'hidraw', 'logitech', 'picolcd', 'ps3', ↵Jiri Kosina2012-10-011-0/+21
|\ \ \ | |_|/ |/| | | | | 'uclogic', 'wacom' and 'wiimote' into for-linus
| | * HID: Add support for Sony PS3 BD Remote ControlDavid Dillow2012-10-011-0/+1
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Sony PS3 Blue-ray Disc Remote Control used to be supported by the BlueZ project's user space, but the code that handled it was recently removed as its functionality conflicted with a real HSP implementation and the mapping was thought to be better handled in the kernel. This is a port of the mapping logic from the fakehid driver by Marcel Holtmann to the in-kernel HID layer. We also add support for the Logitech Harmony Adapter for PS3, which emulates the BD Remote. Signed-off-by: David Dillow <dave@thedillows.org> Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * HID: picoLCD: split driver codeBruno Prémont2012-08-151-0/+20
|/ | | | | | | | In order to make code maintenance easier, split the vairous functions into individial files (this removes a bunch of #ifdefs). Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* Merge branch 'uhid' into for-linusJiri Kosina2012-07-241-0/+1
|\ | | | | | | | | Conflicts: drivers/hid/Kconfig
| * HID: uhid: introduce user-space I/O driver support for HIDDavid Herrmann2012-06-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | This adds a dummy driver that will support user-space I/O drivers for the HID subsystem. This allows to write transport-level drivers like USB-HID and Bluetooth-HID in user-space. Low-Energy Bluetooth needs this to feed HID data that is parsed in user-space back into the kernel. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| |
| \
*-. \ Merge branches 'hidraw', 'magicmouse', 'multitouch', 'roccat', ↵Jiri Kosina2012-07-241-1/+4
|\ \ \ | |_|/ |/| | | | | 'suspend-fixes' and 'upstream' into for-linus
| | * HID: Add driver for Holtek based keyboards with broken HIDTom Harwood2012-07-121-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Corrects two HID descriptor issues, which prevent some Holtek based (USB ID 04d9:a055) keyboards from working. The error when not using the driver is: generic-usb: probe ... failed with error -22 . Signed-off-by: Tom Harwood <tomharwood@fastmail.fm> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * HID: Driver for Lenovo Keyboard with TrackpointBernhard Seibold2012-06-081-0/+1
| |/ |/| | | | | | | | | | | | | | | This driver for the "Lenovo ThinkPad USB Keyboard with Trackpoint" supports setting various device attributes, controlling mute and microphone mute LEDs and enables use of the microphone mute key. Signed-off-by: Bernhard Seibold <mail@bernhard-seibold.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * HID: roccat: add support for Roccat SavuStefan Achatz2012-06-281-1/+2
|/ | | | | | | | | | | | This patch adds rupport for Roccat Savu gaming mouse. In comparison to the other Roccat modules I tried to move even more functionality to userland. Userland tools can soon be found at http://sourceforge.net/projects/roccat Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* Merge branch 'upstream' into for-linusJiri Kosina2012-05-221-0/+1
|\ | | | | | | | | Conflicts: drivers/hid/hid-core.c
| * HID: Aureal Remote Control Device DriverJosenivaldo Benito Junior2012-04-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Devices like Aureal Cy se W-01RN USB_V3.1 and some derived hardware have a bogus HID Report Descriptor. According to that report descriptor, the maximum logical value for key events is 1 and not 101 (101 keys). This quirk fixes this wrong Report Descriptor. Signed-off-by: Josenivaldo Benito Junior <jrbenito@benito.qsl.br> Signed-off-by: Franco Catrin <fcatrin@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | HID: Create a common generic driverHenrik Rydberg2012-05-011-0/+2
|/ | | | | | | | | | Move the hid drivers of the bus drivers to a common generic hid driver, and make it a proper module. This ought to simplify device handling moving forward. Cc: Gustavo Padovan <gustavo@padovan.org> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* Merge branch 'upstream' into for-linusJiri Kosina2012-03-201-0/+2
|\ | | | | | | | | Conflicts: drivers/hid/Makefile
| * HID: add new driver for non-compliant Saitek devicesAndreas Hübner2012-02-221-0/+1
| | | | | | | | | | | | | | | | | | The driver currently only supports the PS1000 controller. It fixes the report descriptor by removing a non-existing axis and clearing the constant bit on the d-pad and button input reports. Signed-off-by: Andreas Hübner <andreas@k4n.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * HID: add support for tivo slide remoteJarod Wilson2012-02-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch finishes off adding full support for the TiVo Slide remote, which is a mostly pure HID device from the perspective of the kernel. There are a few mappings that use a vendor-specific usage page, and a few keys in the consumer usage page that I think make sense to remap slightly, to better fit their key labels' intended use. Doing this in a stand-alone hid-tivo.c makes the modifications only matter for this specific device. What's actually connected to the computer is a Broadcom-made usb dongle, which has an embedded hub, bluetooth adapter, mouse and keyboard devices. You pair with the dongle, then the remote sends data that its converted into HID on the keyboard interface (the mouse interface doesn't do anything interesting, so far as I can tell). lsusb for this device: Bus 004 Device 005: ID 0a5c:2190 Broadcom Corp. Bus 004 Device 004: ID 0a5c:4503 Broadcom Corp. Bus 004 Device 003: ID 150a:1201 Bus 004 Device 002: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth) Speaking of the keyboard interface, the remote actually does contain a keyboard as well. The top slides away, revealing a reasonably functional qwerty keyboard (not unlike many slide cell phones), thus the product name. CC: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | HID: roccat: Only one Kconfig entry for all roccat driversStefan Achatz2012-02-051-8/+3
|/ | | | | | | | To cleanup Kconfig space and ease selection for users there is now a single entry that selects all roccat related drivers at once. Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
*-----. Merge branches 'hyperv', 'multitouch', 'roccat', 'upstream', ↵Jiri Kosina2012-01-051-1/+9
|\ \ \ \ | | | | | | | | | | | | | | | 'upstream-fixes', 'wacom' and 'wiimote' into for-linus
| | | | * HID: wiimote: Add debugfs support stubsDavid Herrmann2011-11-221-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add initializer and deinitializer for debugfs support. This will later allow raw eeprom access and direct DRM modifications to debug wiimote behaviour and further protocol reverse-engineerings. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | | | * HID: wiimote: Add extension support stubDavid Herrmann2011-11-221-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The wiimote supports several extensions. This adds a separate source file which handles all extensions and can be disabled at compile-time. The driver reacts on "plug"-events on the extension port and starts a worker which initializes or deinitializes the extensions. Currently, the initialization logic is not fully understood and we can only detect and enable all extensions when all extensions are deactivated. Therefore, we need to disable all extensions, then detect and activate them again to react on "plug"-events. However, deactivating extensions will generate a new "plug"-event and we will never leave that loop. Hence, we only support extensions if they are plugged before the wiimote is connected (or before the ext-input device is opened). In the future we may support full extension hotplug support, but reverse-engineering this may take a while. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | | | * HID: wiimote: Rename driver to allow multiple source filesDavid Herrmann2011-11-221-0/+2
| | | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Extension and sound support for the wiimote are quite complex and will be implemented in separate source files. Hence rename the current driver to "-core" suffix so multiple files can be linked into this module. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * | HID: roccat: Add support for Isku keyboardStefan Achatz2011-12-061-0/+1
| | |/ | | | | | | | | | | | | | | | | | | | | | This patch adds support for Roccat Isku keyboard. Userland tools can be found at http://sourceforge.net/projects/roccat Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * | HID: multitouch: merge quanta driver into hid-multitouchBenjamin Tissoires2011-11-301-1/+0
| |/ | | | | | | | | | | | | | | | | | | This patch merge the last old-style hid multitouch driver to the generic one. It also adds 2 more quanta pids. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | HID: hyperv: fixup Kconfig / Makefile entriesJiri Kosina2011-11-221-1/+1
| | | | | | | | | | | | | | | | Rename the Kconfig entry for hyperv mouse driver so that it has HID_ prefix as all the other drivers; while at it, place the entry for this driver to properly ordered place in Makefile and Kconfig. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | HID: Move the hid-hyperv driver out of stagingK. Y. Srinivasan2011-11-221-0/+1
|/ | | | | | | | | | | | | | | | The file hid-hyperv.c implements a hid compliant mouse driver for use on a Hyper-V based system. This driver is currently in the staging area and as part of the effort to move this driver out of staging, I had posted the driver code for community review a few weeks ago. This current patch addresses all the review comments I have gotten to date. All the relevant patches have already been submitted to the staging tree as well. As per Greg's suggestion, this patch does not get rid of the code from the staging area. Once the mouse driver lands under the hid directory, we will cleanup the staging directory. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* Merge branch 'upstream' into for-linusJiri Kosina2011-10-251-0/+1
|\ | | | | | | | | | | Conflicts: drivers/hid/hid-core.c drivers/hid/hid-ids.h
| * HID: support primax keyboards violating USB HID specTerry Lambert2011-10-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Primax keyboards with the issue this driver addresses report modifier keys as in band key events instead of as out of band modifier bits, resulting in the modifier keys generating key up events immediately before the keys they are intended to modify. This driver rewrites the raw report data from such keyboards into USB HID 1.11 compliant report data. It only matches the USB vendor and product IDs for the keyboard it has been tested on. Since there are several keyboards, notably a number of laptops and folding USB keyboards known to have similar unresolved problem reports, the list is expected to grow. Signed-off-by: Terry Lambert <tlambert@chromium.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
View Lorry Controller Status