summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath
Commit message (Collapse)AuthorAgeFilesLines
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2011-04-111-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (34 commits) net: Add support for SMSC LAN9530, LAN9730 and LAN89530 mlx4_en: Restoring RX buffer pointer in case of failure mlx4: Sensing link type at device initialization ipv4: Fix "Set rt->rt_iif more sanely on output routes." MAINTAINERS: add entry for Xen network backend be2net: Fix suspend/resume operation be2net: Rename some struct members for clarity pppoe: drop PPPOX_ZOMBIEs in pppoe_flush_dev dsa/mv88e6131: add support for mv88e6085 switch ipv6: Enable RFS sk_rxhash tracking for ipv6 sockets (v2) be2net: Fix a potential crash during shutdown. bna: Fix for handling firmware heartbeat failure can: mcp251x: Allow pass IRQ flags through platform data. smsc911x: fix mac_lock acquision before calling smsc911x_mac_read iwlwifi: accept EEPROM version 0x423 for iwl6000 rt2x00: fix cancelling uninitialized work rtlwifi: Fix some warnings/bugs p54usb: IDs for two new devices wl12xx: fix potential buffer overflow in testmode nvs push zd1211rw: reset rx idle timer from tasklet ...
| * ath9k: Fix phy info print message with AR9485 chipset.Senthil Balasubramanian2011-04-041-0/+1
| | | | | | | | | | | | | | | | | | The phy information print during driver init time doesn't show the numeric part of the chip name properly for AR9485. This patch addresses this issue by adding the string to the respective array. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | Merge branch 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6Linus Torvalds2011-04-0722-50/+50
|\ \ | |/ |/| | | | | * 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6: Fix common misspellings
| * Fix common misspellingsLucas De Marchi2011-03-3122-50/+50
| | | | | | | | | | | | Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
* | carl9170: Fix tx aggregation problems with some clientsChristian Lamparter2011-03-293-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | Some clients seem to rely upon the reception of BlockAckReqs to flush their rx reorder buffer. In order to fix aggregation for these clients carl9170 should set IEEE80211_TX_STAT_AMPDU_NO_BACK to generate a BlockAckReq if the transmission of an AMPDU subframe fails. This fixes aggregation problems with Intel 5100 Windows STAs (and maybe others as well). Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: fix a chip wakeup related crash in ath9k_startFelix Fietkau2011-03-281-0/+4
|/ | | | | | | | | When the chip is still asleep when ath9k_start is called, ath9k_hw_configpcipowersave can trigger a data bus error. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Fix TX queue stuck issue.Senthil Balasubramanian2011-03-231-0/+2
| | | | | | | | | | | | | | | commit 86271e460a66003dc1f4cbfd845adafb790b7587 introduced a regression that caused mac80211 queues in stopped state. ath_drain_all_txq is called in driver flush which would reset the stopped flag and the mac80211 queues were never started after that. iperf traffic is completely stalled due to this issue. Restart the mac80211 queues in driver flush only if the txqs were drained. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Fix kernel panic caused by invalid rate index access.Senthil Balasubramanian2011-03-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the recent tx status optimization in mac80211, we bail out as and and when invalid rate index is found. So the behavior of resetting rate idx to -1 and count to 0 has changed for the rate indexes that were not part of the driver's retry series. This has resulted in ath9k using incorrect rate table index which caused the system to panic. Ideally ath9k need to loop only for the indexes that were part of the retry series and so simply use hw->max_rates as the loop counter. Pasted the stack trace of the panic issue for reference. [ 754.093192] BUG: unable to handle kernel paging request at ffff88046a9025b0 [ 754.093256] IP: [<ffffffffa02eac49>] ath_tx_status+0x209/0x2f0 [ath9k] [ 754.094888] Call Trace: [ 754.094903] <IRQ> [ 754.094928] [<ffffffffa051f883>] ieee80211_tx_status+0x203/0x9e0 [mac80211] [ 754.094975] [<ffffffffa053e305>] ? __ieee80211_wake_queue+0x125/0x140 [mac80211] [ 754.095017] [<ffffffffa02e66c9>] ath_tx_complete_buf+0x1b9/0x370 [ath9k] [ 754.095054] [<ffffffffa02e6fcf>] ath_tx_complete_aggr+0x51f/0xb50 [ath9k] [ 754.095098] [<ffffffffa05382a3>] ? ieee80211_prepare_and_rx_handle+0x173/0xab0 [mac80211] [ 754.095148] [<ffffffff81350e62>] ? _raw_spin_unlock_irqrestore+0x32/0x40 [ 754.095186] [<ffffffffa02e9735>] ath_tx_tasklet+0x365/0x4b0 [ath9k] [ 754.095224] [<ffffffff8107a2a2>] ? clockevents_program_event+0x62/0xa0 [ 754.095261] [<ffffffffa02e2628>] ath9k_tasklet+0x168/0x1c0 [ath9k] [ 754.095298] [<ffffffff8105599b>] tasklet_action+0x6b/0xe0 [ 754.095331] [<ffffffff81056278>] __do_softirq+0x98/0x120 [ 754.095361] [<ffffffff8100cd5c>] call_softirq+0x1c/0x30 [ 754.095393] [<ffffffff8100efb5>] do_softirq+0x65/0xa0 [ 754.095423] [<ffffffff810563fd>] irq_exit+0x8d/0x90 [ 754.095453] [<ffffffff8100ebc1>] do_IRQ+0x61/0xe0 [ 754.095482] [<ffffffff81351413>] ret_from_intr+0x0/0x15 [ 754.095513] <EOI> [ 754.095531] [<ffffffff81014375>] ? native_sched_clock+0x15/0x70 [ 754.096475] [<ffffffffa02bcfa6>] ? acpi_idle_enter_bm+0x24d/0x285 [processor] [ 754.096475] [<ffffffffa02bcf9f>] ? acpi_idle_enter_bm+0x246/0x285 [processor] [ 754.096475] [<ffffffff8127fab2>] cpuidle_idle_call+0x82/0x100 [ 754.096475] [<ffffffff8100a236>] cpu_idle+0xa6/0xf0 [ 754.096475] [<ffffffff81339bc1>] rest_init+0x91/0xa0 [ 754.096475] [<ffffffff814efccd>] start_kernel+0x3fd/0x408 [ 754.096475] [<ffffffff814ef347>] x86_64_start_reservations+0x132/0x136 [ 754.096475] [<ffffffff814ef451>] x86_64_start_kernel+0x106/0x115 [ 754.096475] RIP [<ffffffffa02eac49>] ath_tx_status+0x209/0x2f0 [ath9k] Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Fix kernel panic in AR2427Mohammed Shafi Shajakhan2011-03-211-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Kernel panic occurs just after AR2427 establishes connection with AP. Unless aggregation is enabled we don't initialize the TID structure. Thus accesing the elements of the TID structure when aggregation is disabled, leads to NULL pointer dereferencing. [ 191.320358] Call Trace: [ 191.320364] [<fd250ea7>] ? ath9k_tx+0xa7/0x200 [ath9k] [ 191.320376] [<fd1ec7fc>] ? __ieee80211_tx+0x5c/0x1e0 [mac80211] [ 191.320386] [<fd1edd2b>] ? ieee80211_tx+0x7b/0x90 [mac80211] [ 191.320395] [<fd1edddd>] ? ieee80211_xmit+0x9d/0x1d0 [mac80211] [ 191.320401] [<c014218f>] ? wake_up_state+0xf/0x20 [ 191.320405] [<c015dbc8>] ? signal_wake_up+0x28/0x40 [ 191.320410] [<c012a578>] ? default_spin_lock_flags+0x8/0x10 [ 191.320420] [<fd1ee308>] ? ieee80211_subif_start_xmit+0x2e8/0x7c0 [mac80211] [ 191.320425] [<c058f905>] ? do_page_fault+0x295/0x3a0 [ 191.320431] [<c04c4a3d>] ? dev_hard_start_xmit+0x1ad/0x210 [ 191.320436] [<c04d96b5>] ? sch_direct_xmit+0x105/0x170 [ 191.320445] [<fd1f161a>] ? get_sta_flags+0x2a/0x40 [mac80211] [ 191.320449] [<c04c780f>] ? dev_queue_xmit+0x37f/0x4b0 [ 191.320452] [<c04d75b0>] ? eth_header+0x0/0xb0 [ 191.320456] [<c04cc479>] ? neigh_resolve_output+0xe9/0x310 [ 191.320461] [<c053d295>] ? ip6_output_finish+0xa5/0x110 [ 191.320464] [<c053e354>] ? ip6_output2+0x134/0x250 [ 191.320468] [<c053f7dd>] ? ip6_output+0x6d/0x100 [ 191.320471] [<c0559665>] ? mld_sendpack+0x395/0x3e0 [ 191.320475] [<c0557f81>] ? add_grhead+0x31/0xa0 [ 191.320478] [<c055a83c>] ? mld_send_cr+0x1bc/0x2b0 [ 191.320482] [<c01535d9>] ? irq_exit+0x39/0x70 [ 191.320485] [<c055a940>] ? mld_ifc_timer_expire+0x10/0x40 [ 191.320489] [<c015b92e>] ? run_timer_softirq+0x13e/0x2c0 [ 191.320493] [<c0103a30>] ? common_interrupt+0x30/0x40 [ 191.320498] [<c055a930>] ? mld_ifc_timer_expire+0x0/0x40 [ 191.320502] [<c0153358>] ? __do_softirq+0x98/0x1b0 [ 191.320506] [<c01534b5>] ? do_softirq+0x45/0x50 [ 191.320509] [<c0153605>] ? irq_exit+0x65/0x70 [ 191.320513] [<c05917dc>] ? smp_apic_timer_interrupt+0x5c/0x8b [ 191.320516] [<c0103df1>] ? apic_timer_interrupt+0x31/0x40 [ 191.320521] [<c016007b>] ? k_getrusage+0x12b/0x2f0 [ 191.320525] [<c039e384>] ? acpi_idle_enter_simple+0x117/0x148 [ 191.320529] [<c04a20da>] ? cpuidle_idle_call+0x7a/0x100 [ 191.320532] [<c01021d4>] ? cpu_idle+0x94/0xd0 [ 191.320536] [<c057ab88>] ? rest_init+0x58/0x60 [ 191.320541] [<c07a58ec>] ? start_kernel+0x351/0x357 [ 191.320544] [<c07a53c7>] ? unknown_bootoption+0x0/0x19e [ 191.320548] [<c07a50aa>] ? i386_start_kernel+0xaa/0xb1 [ 191.320550] Code: 03 66 3d 00 03 0f 84 7c 02 00 00 83 c3 18 0f b6 03 8b 4d e0 89 c3 83 e3 0f 6b c3 48 89 5d d8 8d 04 06 8d 50 0c 89 55 d0 8b 40 20 <8b> 00 3b 01 0f 85 8e 02 00 00 f6 47 20 40 0f 84 29 ff ff ff 8b [ 191.320634] EIP: [<fd2586d4>] ath_tx_start+0x474/0x770 [ath9k] SS:ESP 0068:c0761a90 [ 191.320642] CR2: 0000000000000000 [ 191.320647] ---[ end trace 9296ef23b9076ece ]--- [ 191.320650] Kernel panic - not syncing: Fatal exception in interrupt Cc: stable@kernel.org Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge branch 'master' of ↵John W. Linville2011-03-1514-139/+132
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
| * ath9k: fix aggregation related interoperability issuesFelix Fietkau2011-03-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | Some clients seems to keep track of their reorder window even after an aggregation session has been disabled. This causes issues if there are still retried but not completed frames pending for the TID. To ensure that rx does not stall in such situations, set sendbar to 1 for any frame purged from the TID queue on teardown. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: improve reliability of beacon transmission and stuck beacon handlingFelix Fietkau2011-03-143-74/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ath9k calls ath9k_hw_stoptxdma every time it sends a beacon, however there is not much point in doing that if the previous beacon and mcast traffic went out properly. On AR9380, calling that function too often can result in an increase of stuck beacons due to differences in the handling of the queue enable/disable functionality. With this patch, the queue will only be explicitly stopped if the previous data frames were not sent successfully. With the beacon code being the only remaining user of ath9k_hw_stoptxdma, this function can be simplified in order to remove the now pointless attempts at waiting for transmission completion, which would never happen at this point due to the different method of tx scheduling of the beacon queue. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: fix the .flush driver op implementationFelix Fietkau2011-03-143-51/+34
| | | | | | | | | | | | | | | | | | This patch simplifies the flush op and reuses ath_drain_all_txq for flushing out pending frames if necessary. It also uses a global timeout of 200ms instead of the per-queue 60ms timeout. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: fix stopping tx dma on resetFelix Fietkau2011-03-143-8/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In some situations, stopping Tx DMA frequently fails, leading to messages like this: ath: Failed to stop TX DMA in 100 msec after killing last frame ath: Failed to stop TX DMA! This patch uses a few MAC features to abort DMA globally instead of iterating over all hardware queues and attempting to stop them individually. Not only is that faster and works with a shorter timeout, it also makes the process much more reliable. With this change, I can no longer trigger these messages on AR9380, and on AR9280 they become much more rare. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k_hw: fix REG_SET_BIT and REG_CLR_BIT for multiple bitsFelix Fietkau2011-03-141-2/+2
| | | | | | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath5k: implement ieee80211_ops->{get,set}_ringparamJohn W. Linville2011-03-113-1/+46
| | | | | | | | | | | | set_ringparam only allows changes to tx ring at this time. Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k_hw: Increase the wait count for nf load.Vivek Natarajan2011-03-111-2/+2
| | | | | | | | | | | | | | | | Increasing the wait count makes the nf load pass in most of the cases. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k_hw: Fix PLL initialization for AR9485.Vivek Natarajan2011-03-111-2/+2
| | | | | | | | | | | | | | | | Increase the delay to make sure the initialization of pll passes. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k_hw: Improve idle power consumption for AR9485.Vivek Natarajan2011-03-111-0/+2
| | | | | | | | | | | | | | Set some GPIO pins to Pull-down mode to save power. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: remove support for the FIF_PROMISC_IN_BSS filter flagFelix Fietkau2011-03-111-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The hardware rx filter flag triggered by FIF_PROMISC_IN_BSS is overly broad and covers even frames with PHY errors. When this flag is enabled, this message shows up frequently during scanning or hardware resets: ath: Could not stop RX, we could be confusing the DMA engine when we start RX up Since promiscuous mode is usually not particularly useful, yet enabled by default by bridging (either used normally in 4-addr mode, or with hacks for various virtualization software), we should sacrifice it for better reliability during normal operation. This patch leaves it enabled if there are active monitor mode interfaces, since it's very useful for debugging. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | Merge branch 'master' of ↵John W. Linville2011-03-118-56/+133
|\ \ | |/ | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
| * ath5k: restrict AR5K_TX_QUEUE_ID_DATA_MAX to reflect the [0,3] rangeJohn W. Linville2011-03-091-1/+1
| | | | | | | | | | | | | | This just matches reality... Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Bob Copeland <me@bobcopeland.com>
| * wireless:ath: use resource_size() help functionShan Wei2011-03-072-2/+2
| | | | | | | | | | Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath5k: Put hardware in PROMISC mode if there is more than 1 stations.Ben Greear2011-03-073-31/+53
| | | | | | | | | | | | | | | | | | | | It seems ath5k has issues receiving broadcast packets (ARPs) when using multiple STA interfaces associated with multiple APs. This patch ensures the NIC is always in PROMISC mode if there are more than 1 stations associated. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: Fix txq memory address printing in debugfs.Ben Greear2011-03-041-4/+4
| | | | | | | | | | | | | | | | No use printing addresses of pointers, just print the pointers themselves. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k_hw: Read noise floor only for available chains for AR9003Vasanthakumar Thiagarajan2011-03-041-18/+19
| | | | | | | | | | Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: Add a debugfs interface to dump chip registersVasanthakumar Thiagarajan2011-03-041-0/+54
| | | | | | | | | | | | | | | | | | /<debugfs_root>/ieee80211/phyX/ath9k/regdump is the interface to dump the registers. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | Merge branch 'for-davem' of ↵David S. Miller2011-03-0421-403/+769
|\ \ | |/ | | | | ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
| * ath9k_htc: Handle BSSID/AID for multiple interfacesSujith Manoharan2011-03-013-20/+81
| | | | | | | | | | | | | | | | | | | | | | The AID and BSSID should be set in the HW only for the first station interface or adhoc interface. Also, cancel the ANI timer in stop() for multi-STA scenario. And finally configure the HW beacon timers only for the first station interface. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: Fix incorrect GPIO LED pin for AR9485Senthil Balasubramanian2011-02-282-0/+3
| | | | | | | | | | | | | | | | AR9485 doesn't use the default GPIO pin for LED and GPIO 6 is actually used for this. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: use generic mac80211 LED blinking codeFelix Fietkau2011-02-284-170/+61
| | | | | | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: Fix compilation warning.Vivek Natarajan2011-02-251-1/+1
| | | | | | | | | | | | | | | | | | | | Initialize txq to avoid this warning: drivers/net/wireless/ath/ath9k/main.c: In function ‘ath9k_flush’: drivers/net/wireless/ath/ath9k/main.c:2138: warning: ‘txq’ may be used uninitialized in this function Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: Cancel pll_work while disabling radio.Vivek Natarajan2011-02-251-0/+4
| | | | | | | | | | | | | | | | pll_work should be cancelled on full_sleep or it may cause redundant chip reset. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k_hw: Fix pcie_serdes setting for AR9485 1.1 version.Vivek Natarajan2011-02-251-4/+4
| | | | | | | | | | Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mac80211: make tx() operation return voidJohannes Berg2011-02-259-24/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The return value of the tx operation is commonly misused by drivers, leading to errors. All drivers will drop frames if they fail to TX the frame, and they must also properly manage the queues (if they didn't, mac80211 would already warn). Removing the ability for drivers to return a BUSY value also allows significant cleanups of the TX TX handling code in mac80211. Note that this also fixes a bug in ath9k_htc, the old "return -1" there was wrong. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Tested-by: Sedat Dilek <sedat.dilek@googlemail.com> [ath5k] Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> [rt2x00] Acked-by: Larry Finger <Larry.Finger@lwfinger.net> [b43, rtl8187, rtlwifi] Acked-by: Luciano Coelho <coelho@ti.com> [wl12xx] Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mac80211: rename RX_FLAG_TSFTJohannes Berg2011-02-233-3/+3
| | | | | | | | | | | | | | | | | | | | The flag isn't very descriptive -- the intention is that the driver provides a TSF timestamp at the beginning of the MPDU -- make that clearer by renaming the flag to RX_FLAG_MACTIME_MPDU. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k_htc: Fix error path in URB allocationSujith Manoharan2011-02-231-3/+1
| | | | | | | | | | | | | | | | | | | | ath9k_hif_usb_alloc_urbs() takes care of freeing all the allocated URBs for the various endpoints when an error occurs. Calling ath9k_hif_usb_dealloc_urbs() would cause a panic since the URBs have already been freed. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k_htc: Add debug code to print endpoint mappingSujith Manoharan2011-02-231-0/+17
| | | | | | | | | | Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k_htc: Fix RX filtersSujith Manoharan2011-02-231-2/+7
| | | | | | | | | | | | | | | | Add ATH9K_RX_FILTER_UNCOMP_BA_BAR and ATH9K_RX_FILTER_PSPOLL when mac80211 requires it. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k_htc: Fix host RX initializationSujith Manoharan2011-02-231-8/+0
| | | | | | | | | | | | | | | | | | There is no need to set the BSSID mask or opmode when initializing RX, they would be set correctly in the HW reset routine. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k_htc: Fix TBTT calculation for IBSS modeSujith Manoharan2011-02-231-4/+15
| | | | | | | | | | | | | | | | | | | | The target beacon transmission time has to be synced with the HW TSF when configuring beacon timers in Adhoc mode. Failing to do this would cause erroneous beacon transmission, for example, on completion of a scan run to check for IBSS merges. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k_htc: Configure beacon timers in AP modeSujith Manoharan2011-02-234-15/+115
| | | | | | | | | | | | | | | | Handle multi-interface situations by checking if AP interfaces are already present. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k_htc: Add ANI for AP modeSujith Manoharan2011-02-233-17/+43
| | | | | | | | | | | | | | | | The time granularity for the ANI task is different for AP and station mode. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k_htc: Calculate and set the HW opmodeSujith Manoharan2011-02-231-1/+14
| | | | | | | | | | Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k_htc: Allow AP interface to be createdSujith Manoharan2011-02-232-0/+19
| | | | | | | | | | Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k_htc: Maintain individual counters for interfacesSujith Manoharan2011-02-232-2/+40
| | | | | | | | | | | | | | | | This is required for allowing only one IBSS interface to be configured. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k_htc: Protect ampdu_action with a mutexSujith Manoharan2011-02-231-0/+4
| | | | | | | | | | | | | | This is required when issuing commands to the firmware. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k_htc: Use VIF from the packet's control dataSujith Manoharan2011-02-231-1/+7
| | | | | | | | | | | | | | There is no need to use a locally stored reference. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k_htc: Make sequence number calculation per-VIFSujith Manoharan2011-02-232-3/+3
| | | | | | | | | | Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k_htc: Set the BSSID mask for multiple interfacesSujith Manoharan2011-02-232-0/+40
| | | | | | | | | | Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
View Lorry Controller Status