summaryrefslogtreecommitdiff
path: root/drivers/thunderbolt/tb.h
Commit message (Collapse)AuthorAgeFilesLines
* thunderbolt: Disable ports that are not implementedNikunj A. Dadhania2020-08-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 4caf2511ec49 ("thunderbolt: Add trivial .shutdown") exposes a bug in the Thunderbolt driver, that frees an unallocated id, resulting in the following spinlock bad magic bug. [ 20.633803] BUG: spinlock bad magic on CPU#4, halt/3313 [ 20.640030] lock: 0xffff92e6ad5c97e0, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 [ 20.672139] Call Trace: [ 20.675032] dump_stack+0x97/0xdb [ 20.678950] ? spin_bug+0xa5/0xb0 [ 20.682865] do_raw_spin_lock+0x68/0x98 [ 20.687397] _raw_spin_lock_irqsave+0x3f/0x5d [ 20.692535] ida_destroy+0x4f/0x124 [ 20.696657] tb_switch_release+0x6d/0xfd [ 20.701295] device_release+0x2c/0x7d [ 20.705622] kobject_put+0x8e/0xac [ 20.709637] tb_stop+0x55/0x66 [ 20.713243] tb_domain_remove+0x36/0x62 [ 20.717774] nhi_remove+0x4d/0x58 Fix the issue by disabling ports that are enabled as per the EEPROM, but not implemented. While at it, update the kernel doc for the disabled field, to reflect this. Cc: stable@vger.kernel.org Fixes: 4caf2511ec49 ("thunderbolt: Add trivial .shutdown") Reported-by: Srikanth Nandamuri <srikanth.nandamuri@intel.com> Signed-off-by: Nikunj A. Dadhania <nikunj.dadhania@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Add support for authenticate on disconnectMario Limonciello2020-07-011-0/+9
| | | | | | | | | | | | Some external devices can support completing thunderbolt authentication when they are unplugged. For this to work though, the link controller must remain operational. The only device known to support this right now is the Dell WD19TB, so add a quirk for this. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Add support for separating the flush to SPI and authenticateMario Limonciello2020-07-011-0/+2
| | | | | | | | | | | This allows userspace to have a shorter period of time that the device is unusable and to call it at a more convenient time. For example flushing the image may happen while the user is using the machine and authenticating/rebooting may happen while logging out. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Add support for on-board retimersKranthi Kuntala2020-06-221-0/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | USB4 spec specifies standard access to retimers (both on-board and cable) through USB4 port sideband access. This makes it possible to upgrade their firmware in the same way than we already do with the routers. This enumerates on-board retimers under each USB4 port when the link comes up and adds them to the bus under the router the retimer belongs to. Retimers are exposed in sysfs with name like <device>:<port>.<index> where device is the router the retimer belongs to, port is the USB4 port the retimer is connected to and index is the retimer index under that port (starting from 1). This applies to the upstream USB4 port as well so if there is on-board retimer between the port and the router it is also added accordingly. At this time we do not add cable retimers but there is no techincal restriction to do so in the future if needed. It is not clear whether it makes sense to upgrade their firmwares and at least Thunderbolt 3 cables it has not been done outside of lab environments. The sysfs interface is made to follow the router NVM upgrade to make it easy to extend the existing userspace (fwupd) to handle these as well. Signed-off-by: Kranthi Kuntala <kranthi.kuntala@intel.com> Co-developed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Implement USB4 port sideband operations for retimer accessRajmohan Mani2020-06-221-0/+16
| | | | | | | | | | | | | | USB4 spec specifies standard set of sideband operations that are send over the low speed link to access either retimers on the link or the link parter (the other router). The USB4 retimer spec extends these and adds operations for retimer NVM upgrade. This implements the retimer access and NVM upgrade USB4 port sideband operations which we need for retimer support in the patch that follows. Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Co-developed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Split common NVM functionality into a separate fileMika Westerberg2020-06-221-5/+26
| | | | | | | | | We are going to reuse some of this functionality to implement retimer NVM upgrade so move common NVM functionality into its own file. We also rename the structure from tb_switch_nvm to tb_nvm to make it clear that it is not just for switches. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Add USB3 bandwidth managementMika Westerberg2020-06-221-2/+2
| | | | | | | | | | | | | | | | | | | | USB3 supports both isochronous and non-isochronous traffic. The former requires guaranteed bandwidth and can take up to 90% of the total bandwidth. With USB4 USB3 is tunneled over USB4 fabric which means that we need to make sure there is enough bandwidth allocated for the USB3 tunnels in addition to DisplayPort tunnels. Whereas DisplayPort bandwidth management is static and done before the DP tunnel is established, the USB3 bandwidth management is dynamic and allows increasing and decreasing the allocated bandwidth according to what is currently consumed. This is done through host router USB3 downstream adapter registers. This adds USB3 bandwidth management to the software connection manager so that we always try to allocate maximum bandwidth for DP tunnels and what is left is allocated for USB3. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Make tb_port_get_link_speed() available to other filesMika Westerberg2020-06-221-0/+2
| | | | | | | We need to call this from tb.c when we improve the bandwidth management to take USB3 into account. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Implement USB3 bandwidth negotiation routinesMika Westerberg2020-06-221-0/+9
| | | | | | | | | | | | | Each host router USB3 downstream adapter has a set of registers that are used to negotiate bandwidth between the connection manager and the internal xHCI controller. These registers allow dynamic bandwidth management for USB3 isochronous traffic based on what is actually consumed vs. allocated at any given time. Implement these USB3 bandwidth negotiation routines to allow the software connection manager take advantage of these. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Do not tunnel USB3 if link is not USB4Mika Westerberg2020-06-221-0/+2
| | | | | | | USB3 tunneling is possible only over USB4 link so don't create USB3 tunnels if that's not the case. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Increase path length in discoveryMika Westerberg2020-06-221-1/+5
| | | | | | | | | Currently we have only supported paths that follow daisy-chain topology but USB4 also allows to build trees of devices. For this reason increase maximum path length we use for discovery to be from the lowest level to the host router and back to the same level. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Make tb_path_alloc() work with tree topologiesMika Westerberg2020-06-221-0/+12
| | | | | | | | | | | With USB4, topologies are not limited to daisy-chains anymore so when calculating how many hops are between two ports we need to walk the whole path instead. Add helper function tb_for_each_port_on_path() that can be used to walk over each port on a path and make tb_path_alloc() to use it. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Add support for USB 3.x tunnelsRajmohan Mani2019-12-181-0/+15
| | | | | | | | | | | | | | | | | | USB4 added a capability to tunnel USB 3.x protocol over the USB4 fabric. USB4 device routers may include integrated SuperSpeed HUB or a function or both. USB tunneling follows PCIe so that the tunnel is created between the parent and the child router from USB3 downstream adapter port to USB3 upstream adapter port over a single USB4 link. This adds support for USB 3.x tunneling and also capability to discover existing USB 3.x tunnels (for example created by connection manager in boot firmware). Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Co-developed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/20191217123345.31850-9-mika.westerberg@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* thunderbolt: Add support for Time Management UnitRajmohan Mani2019-12-181-0/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Time Management Unit (TMU) is included in each USB4 router. It is used to synchronize time across the USB4 fabric. By default when USB4 router is plugged to the domain, its TMU is turned off. This differs from Thunderbolt (1, 2 and 3) devices whose TMU is by default configured to bi-directional HiFi mode. Since time synchronization is needed for proper Display Port tunneling this means we need to configure the TMU on USB4 compliant devices. The USB4 spec allows some flexibility on how the TMU can be configured. This makes it possible to enable link power management states (CLx) in certain topologies, where for example DP tunneling is not used. TMU can also be re-configured dynamicaly depending on types of tunnels created over the USB4 fabric. In this patch we simply configure the TMU to be in bi-directional HiFi mode. This way we can tunnel any kind of traffic without need to perform complex steps to re-configure the domain dynamically. We can add more fine-grained TMU configuration later on when we start enabling CLx states. Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Co-developed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/20191217123345.31850-8-mika.westerberg@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* thunderbolt: Make tb_switch_find_cap() available to other filesRajmohan Mani2019-12-181-0/+1
| | | | | | | | | | We need to find switch capabilities in order to implement TMU support so make it available to other files as well. Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/20191217123345.31850-7-mika.westerberg@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* thunderbolt: Add initial support for USB4Mika Westerberg2019-12-181-0/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | USB4 is the public specification based on Thunderbolt 3 protocol. There are some differences in register layouts and flows. In addition to PCIe and DP tunneling, USB4 supports tunneling of USB 3.x. USB4 is also backward compatible with Thunderbolt 3 (and older generations but the spec only talks about 3rd generation). USB4 compliant devices can be identified by checking USB4 version field in router configuration space. This patch adds initial support for USB4 compliant hosts and devices which enables following features provided by the existing functionality in the driver: - PCIe tunneling - Display Port tunneling - Host and device NVM firmware upgrade - P2P networking This brings the USB4 support to the same level that we already have for Thunderbolt 1, 2 and 3 devices. Note the spec talks about host and device "routers" but in the driver we still use term "switch" in most places. Both can be used interchangeably. Co-developed-by: Rajmohan Mani <rajmohan.mani@intel.com> Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/20191217123345.31850-5-mika.westerberg@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* thunderbolt: Make tb_find_port() available to other filesMika Westerberg2019-12-181-0/+2
| | | | | | | | | | | | We will be needing this when adding initial USB4 support so make it available to other files in the driver as well. We also rename it to tb_switch_find_port() to follow conventions used in switch.c. No functional changes. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/20191217123345.31850-2-mika.westerberg@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* thunderbolt: Add bandwidth management for Display Port tunnelsMika Westerberg2019-11-021-0/+2
| | | | | | | | | | | | Titan Ridge supports Display Port 1.4 which adds HBR3 (High Bit Rate) rates that may be up to 8.1 Gb/s over 4 lanes. This translates to effective data bandwidth of 25.92 Gb/s (as 8/10 encoding is removed by the DP adapters when going over Thunderbolt fabric). If another high rate monitor is connected we may need to reduce the bandwidth it consumes so that it fits into the total 40 Gb/s available on the Thunderbolt fabric. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Add Display Port adapter pairing and resource managementMika Westerberg2019-11-021-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | To perform proper Display Port tunneling for Thunderbolt 3 devices we need to allocate DP resources for DP IN port before they can be used. The reason for this is that the user can also connect a monitor directly to the Type-C ports in which case the Thunderbolt controller acts as re-driver for Display Port (no tunneling takes place) taking the DP sinks away from the connection manager. This allocation is done using special sink allocation registers available through the link controller. We can pair DP IN to DP OUT only if * DP IN has sink allocated via link controller * DP OUT port receives hotplug event For DP IN adapters (only for the host router) we first query whether there is DP resource available (it may be the previous instance of the driver for example already allocated it) and if it is we add it to the list. We then update the list when after each plug/unplug event to a DP IN/OUT adapter. Each time the list is updated we try to find additional DP IN <-> DP OUT pairs for tunnel establishment. This strategy also makes it possible to establish another tunnel in case there are 3 monitors connected and one gets unplugged releasing the DP IN adapter for the new tunnel. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Add downstream PCIe port mappings for Alpine and Titan RidgeMika Westerberg2019-11-021-0/+25
| | | | | | | | In order to keep PCIe hierarchies consistent across hotplugs, add hard-coded PCIe downstream port to Thunderbolt port for Alpine Ridge and Titan Ridge as well. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Expand controller name in tb_switch_is_xy()Mika Westerberg2019-11-021-4/+4
| | | | | | | | | For a casual reader tb_switch_is_cr() does not tell much so instead spell out the full controller name in the function name. For example tb_switch_is_cr() becomes tb_switch_is_cactus_ridge() which is easier to understand. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Add support for lane bondingMika Westerberg2019-11-021-0/+10
| | | | | | | | | | | | | | | | | | | | Lane bonding allows aggregating two 10/20 Gb/s (depending on the generation) lanes into a single 20/40 Gb/s bonded link. This allows sharing the full bandwidth more efficiently. In order to establish lane bonding we need to check that lane bonding is possible through link controller and that both ends of the link actually supports 2x widths. This also means that all the paths should be established through the primary port so update tb_path_alloc() to handle this as well. Lane bonding is supported starting from Falcon Ridge (2nd generation) controllers. We also expose the current speed and number of lanes under each device except the host router following similar attribute naming than USB bus. Expose speed and number of lanes for both directions to allow possibility of asymmetric link in the future. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Add helper macro to iterate over switch portsMika Westerberg2019-11-011-0/+11
| | | | | | | | | | | | There are quite many places in the driver where we iterate over each port in the switch. To make it bit more convenient, add a macro that can be used to iterate over each port and convert existing call sites to use it. This is based on code by Lukas Wunner. No functional changes. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Make tb_sw_write() take const parameterMika Westerberg2019-11-011-1/+1
| | | | | | The function does not modify the argument in any way so make it const. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Introduce tb_switch_is_icm()Mika Westerberg2019-11-011-0/+14
| | | | | | | | | | | We currently differentiate between SW CM (Software Connection Manager, sometimes also called External Connection Manager) and ICM (Firmware based Connection Manager, Internal Connection Manager) by looking directly at the sw->config.enabled field which may be rather hard to understand for the casual reader. For this reason introduce a wrapper function with documentation that should make the intention more clear. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Make sure device runtime resume completes before taking domain lockMika Westerberg2019-06-121-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a device is authorized from userspace by writing to authorized attribute we first take the domain lock and then runtime resume the device in question. There are two issues with this. First is that the device connected notifications are blocked during this time which means we get them only after the authorization operation is complete. Because of this the authorization needed flag from the firmware notification is not reflecting the real authorization status anymore. So what happens is that the "authorized" keeps returning 0 even if the device was already authorized properly. Second issue is that each time the controller is runtime resumed the connection_id field of device connected notification may be different than in the previous resume. We need to use the latest connection_id otherwise the firmware rejects the authorization command. Fix these by moving runtime resume operations to happen before the domain lock is taken, and waiting for the updated device connected notification from the firmware before we allow runtime resume of a device to complete. While there add missing locking to tb_switch_nvm_read(). Fixes: 09f11b6c99fe ("thunderbolt: Take domain lock in switch sysfs attribute callbacks") Reported-by: Pengfei Xu <pengfei.xu@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Make priority unsigned in struct tb_pathNathan Chancellor2019-04-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Clang warns: drivers/thunderbolt/tunnel.c:504:17: warning: implicit truncation from 'int' to bit-field changes value from 5 to -3 [-Wbitfield-constant-conversion] path->priority = 5; ^ ~ 1 warning generated. The priority member in struct tb_path is only ever assigned a positive number: $ rg -n priority drivers/thunderbolt/path.c drivers/thunderbolt/tunnel.c:99: path->priority = 3; drivers/thunderbolt/tunnel.c:308: path->priority = 2; drivers/thunderbolt/tunnel.c:323: path->priority = 1; drivers/thunderbolt/tunnel.c:504: path->priority = 5; Furthermore, that value is only assigned to an unsigned integer in tb_path_activate (the priority member in struct tb_regs_hop). Fixes: 44242d6c9703 ("thunderbolt: Add support for DMA tunnels") Link: https://github.com/ClangBuiltLinux/linux/issues/454 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Make __TB_[SW|PORT]_PRINT take const parametersMika Westerberg2019-04-181-3/+3
| | | | | | | The printing macros do not modify the passed object so make them const. While there make tb_route() to take const parameter as well. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Add support for DMA tunnelsMika Westerberg2019-04-181-0/+4
| | | | | | | | | | | | | In addition to PCIe and Display Port tunnels it is also possible to create tunnels that forward DMA traffic from the host interface adapter (NHI) to a NULL port that is connected to another domain through a Thunderbolt cable. These tunnels can be used to carry software messages such as networking packets. To support this we introduce another tunnel type (TB_TUNNEL_DMA) that supports paths from NHI to NULL port and back. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Run tb_xdp_handle_request() in system workqueueMika Westerberg2019-04-181-0/+7
| | | | | | | | | | | | | | | We run all XDomain requests during discovery in tb->wq and since it only runs one work at the time it means that sending back reply to the other domain may be delayed too much depending whether there is an active XDomain discovery request running. To make sure we can send reply to the other domain as soon as possible run tb_xdp_handle_request() in system workqueue instead. Since the device can be hot-removed in the middle we need to make sure the domain structure is still around when the function is run so increase reference count before we schedule the reply work. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Add support for Display Port tunnelsMika Westerberg2019-04-181-0/+17
| | | | | | | | | | | Display Port tunnels are somewhat more complex than PCIe tunnels as it requires 3 tunnels (AUX Rx/Tx and Video). In addition we are not supposed to create the tunnels immediately when a DP OUT is enumerated. Instead we need to wait until we get hotplug event to that adapter port or check if the port has HPD set before tunnels can be established. This adds Display Port tunneling support to the software connection manager. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Generalize port finding routines to support all port typesMika Westerberg2019-04-181-0/+1
| | | | | | | We will be needing these routines to find Display Port adapters as well so modify them to take port type as the second parameter. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Scan only valid NULL adapter ports in hotplugMika Westerberg2019-04-181-0/+5
| | | | | | | | | | | | The only way to expand Thunderbolt topology is through the NULL adapter ports (typically ports 1, 2, 3 and 4). There is no point handling Thunderbolt hotplug events on any other port. Add a helper function (tb_port_is_null()) that can be used to determine if the port is NULL port, and use it in software connection manager code when hotplug event is handled. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Add support for full PCIe daisy chainsMika Westerberg2019-04-181-0/+27
| | | | | | | | | | | | | | | Currently the software connection manager (tb.c) has only supported creating a single PCIe tunnel, no PCIe device daisy chaining has been supported so far. This updates the software connection manager so that it now can create PCIe tunnels for full chain of six devices. Because PCIe allows DMA and opens possibility for DMA attacks we change security level to "user" meaning that PCIe tunneling requires that the userspace authorizes the devices first. This makes it possible to block PCIe tunneling completely while still allowing other types of tunnels to be automatically created. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Discover preboot PCIe paths the boot firmware establishedMika Westerberg2019-04-181-0/+18
| | | | | | | | | | | | | | In Apple Macs the boot firmware (EFI) connects all devices automatically when the system is started, before it hands over to the OS. Instead of ignoring we discover all those PCIe tunnels and record them using our internal structures, just like we do when a device is connected after the OS is already up. By doing this we can properly tear down tunnels when devices are disconnected. Also this allows us to resume the existing tunnels after system suspend/resume cycle. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Extend tunnel creation to more than 2 adjacent switchesMika Westerberg2019-04-181-11/+43
| | | | | | | | | | | | | Now that we can allocate hop IDs per port on a path, we can take advantage of this and create tunnels covering longer paths than just between two adjacent switches. PCIe actually does not need this as it is typically a daisy chain between two adjacent switches but this way we do not need to hard-code creation of the tunnel. While there add name to struct tb_path to make debugging easier, and update kernel-doc comments. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Add helper function to iterate from one port to anotherMika Westerberg2019-04-181-0/+2
| | | | | | | | | We need to be able to walk from one port to another when we are creating paths where there are multiple switches between two ports. For this reason introduce a new function tb_next_port_on_path(). Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Lukas Wunner <lukas@wunner.de>
* thunderbolt: Assign remote for both ports in case of dual linkMika Westerberg2019-04-181-5/+31
| | | | | | | | | | | | | | | | | | | Currently the driver only assigns remote port for the primary port if in case of dual link. This makes things such as walking from one port to another more complex than necessary because the code needs to change from secondary to primary port if the path that is established is created using secondary links. In order to always assign both remote pointers we need to prevent the scanning code from following the secondary link. Failing to do that might cause problems as the same switch may be enumerated twice (or removed in case of unplug). Handle that properly by introducing a new function tb_port_has_remote() that returns true only for the primary port. We also update tb_is_upstream_port() to support both dual link ports, make it take const port pointer and move it below tb_upstream_port() to keep similar functions close. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Add functions for allocating and releasing HopIDsMika Westerberg2019-04-181-0/+11
| | | | | | | | | | | | | | Each port has a separate path configuration space that is used for finding the next hop (switch) in the path. HopID is an index to this configuration space. HopIDs 0 - 7 are reserved by the protocol. In order to get next available HopID for each direction we provide two pairs of helper functions that can be used to allocate and release HopIDs for a given port. While there remove obsolete TODO comment. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Generalize tunnel creation functionalityMika Westerberg2019-04-181-0/+2
| | | | | | | | | | | | To be able to tunnel non-PCIe traffic, separate tunnel functionality into generic and PCIe specific parts. Rename struct tb_pci_tunnel to tb_tunnel, and make it hold an array of paths instead of just two. Update all the tunneling functions to take this structure as parameter. We also move tb_pci_port_active() to switch.c (and rename it) where we will be keeping all port and switch related functions. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Cache adapter specific capability offset into struct portMika Westerberg2019-04-181-0/+2
| | | | | | | | | | | The adapter specific capability either is there or not if the port does not hold an adapter. Instead of always finding it on-demand we read the offset just once when the port is initialized. While there we update the struct port documentation to follow kernel-doc format. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Set sleep bit when suspending switchMika Westerberg2019-04-181-0/+1
| | | | | | | | Thunderbolt 2 devices and beyond link controller needs to be notified when a switch is going to be suspended by setting bit 31 in LC_SX_CTRL register. Add this functionality to the software connection manager. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Configure lanes when switch is initializedMika Westerberg2019-04-181-0/+2
| | | | | | | | | Thunderbolt 2 devices and beyond need to have additional bits set in link controller specific registers. This includes two bits in LC_SX_CTRL that tell the link controller which lane is connected and whether it is upstream facing or not. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Move LC specific functionality into a separate fileMika Westerberg2019-04-181-0/+3
| | | | | | | | We will be adding more link controller functionality in subsequent patches and it does not make sense to keep all that in switch.c, so separate LC functionality into its own file. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Enable TMU access when accessing port space on legacy devicesMika Westerberg2019-04-181-0/+10
| | | | | | | | Light Ridge and Eagle Ridge both need to have TMU access enabled before port space can be fully accessed so make sure it happens on those. This allows us to get rid of the offset quirk in tb_port_find_cap(). Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Do not allocate switch if depth is greater than 6Mika Westerberg2019-04-181-0/+1
| | | | | | | | | | Maximum depth in Thunderbolt topology is 6 so make sure it is not possible to allocate switches that exceed the depth limit. While at it update tb_switch_alloc() to use upper/lower_32_bits() following tb_switch_alloc_safe_mode(). Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Take domain lock in switch sysfs attribute callbacksMika Westerberg2019-04-181-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | switch_lock was introduced because it allowed serialization of device authorization requests from userspace without need to take the big domain lock (tb->lock). This was fine because device authorization with ICM is just one command that is sent to the firmware. Now that we start to handle all tunneling in the driver switch_lock is not enough because we need to walk over the topology to establish paths. For this reason drop switch_lock from the driver completely in favour of big domain lock. There is one complication, though. If userspace is waiting for the lock in tb_switch_set_authorized(), it keeps the device_del() from removing the sysfs attribute because it waits for active users to release the attribute first which leads into following splat: INFO: task kworker/u8:3:73 blocked for more than 61 seconds. Tainted: G W 5.1.0-rc1+ #244 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kworker/u8:3 D12976 73 2 0x80000000 Workqueue: thunderbolt0 tb_handle_hotplug [thunderbolt] Call Trace: ? __schedule+0x2e5/0x740 ? _raw_spin_lock_irqsave+0x12/0x40 ? prepare_to_wait_event+0xc5/0x160 schedule+0x2d/0x80 __kernfs_remove.part.17+0x183/0x1f0 ? finish_wait+0x80/0x80 kernfs_remove_by_name_ns+0x4a/0x90 remove_files.isra.1+0x2b/0x60 sysfs_remove_group+0x38/0x80 sysfs_remove_groups+0x24/0x40 device_remove_attrs+0x3d/0x70 device_del+0x14c/0x360 device_unregister+0x15/0x50 tb_switch_remove+0x9e/0x1d0 [thunderbolt] tb_handle_hotplug+0x119/0x5a0 [thunderbolt] ? process_one_work+0x1b7/0x420 process_one_work+0x1b7/0x420 worker_thread+0x37/0x380 ? _raw_spin_unlock_irqrestore+0xf/0x30 ? process_one_work+0x420/0x420 kthread+0x118/0x130 ? kthread_create_on_node+0x60/0x60 ret_from_fork+0x35/0x40 We deal this by following what network stack did for some of their attributes and use mutex_trylock() with restart_syscall(). This makes userspace release the attribute allowing sysfs attribute removal to progress before the write is restarted and eventually fail when the attribute is removed. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Block reads and writes if switch is unpluggedMika Westerberg2019-04-181-0/+8
| | | | | | | If switch is already disconnected there is no point sending it commands and waiting for timeout. Instead in that case return error immediately. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* thunderbolt: Drop duplicated get_switch_at_route()Mika Westerberg2019-04-181-1/+0
| | | | | | | | tb_switch_find_by_route() does the same already so use it instead and remove duplicated get_switch_at_route(). Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Lukas Wunner <lukas@wunner.de>
* thunderbolt: Remove unused work field in struct tb_switchMika Westerberg2019-04-181-2/+0
| | | | | | | This field is not used anywhere so remove it. Reported-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
View Lorry Controller Status