From 5eed800a68116a3cc66731162f7ea431d2732d4c Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Sat, 29 Feb 2020 11:44:20 +0800 Subject: thermal: imx8mm: Add support for i.MX8MM thermal monitoring unit i.MX8MM has a thermal monitoring unit(TMU) inside, it ONLY has one sensor for CPU, add support for reading immediate temperature of this sensor. Signed-off-by: Anson Huang Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/1582947862-11073-2-git-send-email-Anson.Huang@nxp.com --- drivers/thermal/Kconfig | 10 +++ drivers/thermal/Makefile | 1 + drivers/thermal/imx8mm_thermal.c | 131 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 142 insertions(+) create mode 100644 drivers/thermal/imx8mm_thermal.c diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index bb7b010f1ca7..770e0bd9535d 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -262,6 +262,16 @@ config IMX_SC_THERMAL sensor. It supports one critical trip point and one passive trip point for each thermal sensor. +config IMX8MM_THERMAL + tristate "Temperature sensor driver for Freescale i.MX8MM SoC" + depends on ARCH_MXC + depends on OF + help + Support for Thermal Monitoring Unit (TMU) found on Freescale i.MX8MM SoC. + It supports one critical trip point and one passive trip point. The + cpufreq is used as the cooling device to throttle CPUs when the passive + trip is crossed. + config MAX77620_THERMAL tristate "Temperature sensor driver for Maxim MAX77620 PMIC" depends on MFD_MAX77620 diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index 4d1b4e71b3e8..8c8ed7b79915 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -44,6 +44,7 @@ obj-$(CONFIG_ARMADA_THERMAL) += armada_thermal.o obj-$(CONFIG_TANGO_THERMAL) += tango_thermal.o obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o obj-$(CONFIG_IMX_SC_THERMAL) += imx_sc_thermal.o +obj-$(CONFIG_IMX8MM_THERMAL) += imx8mm_thermal.o obj-$(CONFIG_MAX77620_THERMAL) += max77620_thermal.o obj-$(CONFIG_QORIQ_THERMAL) += qoriq_thermal.o obj-$(CONFIG_DA9062_THERMAL) += da9062-thermal.o diff --git a/drivers/thermal/imx8mm_thermal.c b/drivers/thermal/imx8mm_thermal.c new file mode 100644 index 000000000000..d597cebb0545 --- /dev/null +++ b/drivers/thermal/imx8mm_thermal.c @@ -0,0 +1,131 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2020 NXP. + * + * Author: Anson Huang + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "thermal_core.h" + +#define TER 0x0 /* TMU enable */ +#define TRITSR 0x20 /* TMU immediate temp */ + +#define TER_EN BIT(31) +#define TRITSR_VAL_MASK 0xff + +#define TEMP_LOW_LIMIT 10 + +struct imx8mm_tmu { + struct thermal_zone_device *tzd; + void __iomem *base; + struct clk *clk; +}; + +static int tmu_get_temp(void *data, int *temp) +{ + struct imx8mm_tmu *tmu = data; + u32 val; + + val = readl_relaxed(tmu->base + TRITSR) & TRITSR_VAL_MASK; + if (val < TEMP_LOW_LIMIT) + return -EAGAIN; + + *temp = val * 1000; + + return 0; +} + +static struct thermal_zone_of_device_ops tmu_tz_ops = { + .get_temp = tmu_get_temp, +}; + +static int imx8mm_tmu_probe(struct platform_device *pdev) +{ + struct imx8mm_tmu *tmu; + u32 val; + int ret; + + tmu = devm_kzalloc(&pdev->dev, sizeof(struct imx8mm_tmu), GFP_KERNEL); + if (!tmu) + return -ENOMEM; + + tmu->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(tmu->base)) + return PTR_ERR(tmu->base); + + tmu->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(tmu->clk)) { + ret = PTR_ERR(tmu->clk); + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, + "failed to get tmu clock: %d\n", ret); + return ret; + } + + ret = clk_prepare_enable(tmu->clk); + if (ret) { + dev_err(&pdev->dev, "failed to enable tmu clock: %d\n", ret); + return ret; + } + + tmu->tzd = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, + tmu, &tmu_tz_ops); + if (IS_ERR(tmu->tzd)) { + dev_err(&pdev->dev, + "failed to register thermal zone sensor: %d\n", ret); + return PTR_ERR(tmu->tzd); + } + + platform_set_drvdata(pdev, tmu); + + /* enable the monitor */ + val = readl_relaxed(tmu->base + TER); + val |= TER_EN; + writel_relaxed(val, tmu->base + TER); + + return 0; +} + +static int imx8mm_tmu_remove(struct platform_device *pdev) +{ + struct imx8mm_tmu *tmu = platform_get_drvdata(pdev); + u32 val; + + /* disable TMU */ + val = readl_relaxed(tmu->base + TER); + val &= ~TER_EN; + writel_relaxed(val, tmu->base + TER); + + clk_disable_unprepare(tmu->clk); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static const struct of_device_id imx8mm_tmu_table[] = { + { .compatible = "fsl,imx8mm-tmu", }, + { }, +}; + +static struct platform_driver imx8mm_tmu = { + .driver = { + .name = "i.mx8mm_thermal", + .of_match_table = imx8mm_tmu_table, + }, + .probe = imx8mm_tmu_probe, + .remove = imx8mm_tmu_remove, +}; +module_platform_driver(imx8mm_tmu); + +MODULE_AUTHOR("Anson Huang "); +MODULE_DESCRIPTION("i.MX8MM Thermal Monitor Unit driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.1