From 278b45b06bf721b7cf5de67a0126786c60c720e6 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Wed, 27 Jun 2012 13:40:04 +0200 Subject: ARM: Orion: DT support for IRQ and GPIO Controllers Both IRQ and GPIO controllers can now be represented in DT. The IRQ controllers are setup first, and then the GPIO controllers. Interrupts for GPIO lines are placed directly after the main interrupts in the interrupt space. Signed-off-by: Andrew Lunn Acked-by: Sebastian Hesselbarth Acked-by: Arnd Bergmann Tested-by: Josh Coombs Tested-by: Simon Baatz --- .../devicetree/bindings/arm/mrvl/intc.txt | 20 +++++++++++++++++++ .../devicetree/bindings/gpio/mrvl-gpio.txt | 23 ++++++++++++++++++++++ 2 files changed, 43 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/arm/mrvl/intc.txt b/Documentation/devicetree/bindings/arm/mrvl/intc.txt index 80b9a94d9a23..8b53273cb22f 100644 --- a/Documentation/devicetree/bindings/arm/mrvl/intc.txt +++ b/Documentation/devicetree/bindings/arm/mrvl/intc.txt @@ -38,3 +38,23 @@ Example: reg-names = "mux status", "mux mask"; mrvl,intc-nr-irqs = <2>; }; + +* Marvell Orion Interrupt controller + +Required properties +- compatible : Should be "marvell,orion-intc". +- #interrupt-cells: Specifies the number of cells needed to encode an + interrupt source. Supported value is <1>. +- interrupt-controller : Declare this node to be an interrupt controller. +- reg : Interrupt mask address. A list of 4 byte ranges, one per controller. + One entry in the list represents 32 interrupts. + +Example: + + intc: interrupt-controller { + compatible = "marvell,orion-intc", "marvell,intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xfed20204 0x04>, + <0xfed20214 0x04>; + }; diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt index 05428f39d9ac..e13787498bcf 100644 --- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt +++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt @@ -27,3 +27,26 @@ Example: interrupt-controller; #interrupt-cells = <1>; }; + +* Marvell Orion GPIO Controller + +Required properties: +- compatible : Should be "marvell,orion-gpio" +- reg : Address and length of the register set for controller. +- gpio-controller : So we know this is a gpio controller. +- ngpio : How many gpios this controller has. +- interrupts : Up to 4 Interrupts for the controller. + +Optional properties: +- mask-offset : For SMP Orions, offset for Nth CPU + +Example: + + gpio0: gpio@10100 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0x10100 0x40>; + ngpio = <32>; + interrupts = <35>, <36>, <37>, <38>; + }; -- cgit v1.2.1