From 9dcba7f2b7697db787741cf6698bf5c95130ffce Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 27 Apr 2008 15:38:30 +0200 Subject: gayle: add "doubler" parameter * Add "doubler" parameter to enable support for IDE doublers. * Obsolete "ide=doubler" kernel parameter. Cc: Geert Uytterhoeven Signed-off-by: Bartlomiej Zolnierkiewicz --- Documentation/ide/ide.txt | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) (limited to 'Documentation/ide/ide.txt') diff --git a/Documentation/ide/ide.txt b/Documentation/ide/ide.txt index caf24b21e7f5..0c78f4b1d9d9 100644 --- a/Documentation/ide/ide.txt +++ b/Documentation/ide/ide.txt @@ -181,12 +181,6 @@ driver using the "options=" keyword to insmod, while replacing any ',' with Summary of ide driver parameters for kernel command line -------------------------------------------------------- - "ide=doubler" : probe/support IDE doublers on Amiga - -There may be more options than shown -- use the source, Luke! - -Everything else is rejected with a "BAD OPTION" message. - For legacy IDE VLB host drivers (ali14xx/dtc2278/ht6560b/qd65xx/umc8672) you need to explicitly enable probing by using "probe" kernel parameter, i.e. to enable probing for ALI M14xx chipsets (ali14xx host driver) use: @@ -203,6 +197,9 @@ are detected automatically). You also need to use "probe" kernel parameter for ide-4drives driver (support for IDE generic chipset with four drives on one port). +To enable support for IDE doublers on Amiga use "doubler" kernel parameter +for gayle host driver (i.e. "gayle.doubler" if the driver is built-in). + To force ignoring cable detection (this should be needed only if you're using short 40-wires cable which cannot be automatically detected - if this is not a case please report it as a bug instead) use "ignore_cable" kernel parameter: -- cgit v1.2.1