From 8614206a054a2b53237d5d5c47f8669477cf267f Mon Sep 17 00:00:00 2001 From: Alexander Sverdlin Date: Mon, 24 Jul 2017 22:51:45 +0200 Subject: iio: adc: New driver for Cirrus Logic EP93xx ADC New driver adding support for ADC found on Cirrus Logic EP93xx series of SoCs. Board specific code must take care to create plaform device with all necessary resources. Signed-off-by: Alexander Sverdlin Acked-by: Jonathan Cameron Signed-off-by: Jonathan Cameron --- Documentation/iio/ep93xx_adc.txt | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 Documentation/iio/ep93xx_adc.txt (limited to 'Documentation/iio') diff --git a/Documentation/iio/ep93xx_adc.txt b/Documentation/iio/ep93xx_adc.txt new file mode 100644 index 000000000000..23053e7817bd --- /dev/null +++ b/Documentation/iio/ep93xx_adc.txt @@ -0,0 +1,29 @@ +Cirrus Logic EP93xx ADC driver. + +1. Overview + +The driver is intended to work on both low-end (EP9301, EP9302) devices with +5-channel ADC and high-end (EP9307, EP9312, EP9315) devices with 10-channel +touchscreen/ADC module. + +2. Channel numbering + +Numbering scheme for channels 0..4 is defined in EP9301 and EP9302 datasheets. +EP9307, EP9312 and EP9312 have 3 channels more (total 8), but the numbering is +not defined. So the last three are numbered randomly, let's say. + +Assuming ep93xx_adc is IIO device0, you'd find the following entries under +/sys/bus/iio/devices/iio:device0/: + + +-----------------+---------------+ + | sysfs entry | ball/pin name | + +-----------------+---------------+ + | in_voltage0_raw | YM | + | in_voltage1_raw | SXP | + | in_voltage2_raw | SXM | + | in_voltage3_raw | SYP | + | in_voltage4_raw | SYM | + | in_voltage5_raw | XP | + | in_voltage6_raw | XM | + | in_voltage7_raw | YP | + +-----------------+---------------+ -- cgit v1.2.1