From 83f73168a82ff7acf25caa15a0a034d7752f775c Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 28 Sep 2022 09:01:32 +0200 Subject: ARM: omap2: remove unused USB code Some musb related code is no longer in use after commit 4d62dbda8561 ("ARM: OMAP3: Remove legacy support for am3517-evm") and can be removed. Acked-by: Tony Lindgren Signed-off-by: Arnd Bergmann --- arch/arm/mach-omap2/usb.h | 71 ----------------------------------------------- 1 file changed, 71 deletions(-) delete mode 100644 arch/arm/mach-omap2/usb.h (limited to 'arch/arm/mach-omap2/usb.h') diff --git a/arch/arm/mach-omap2/usb.h b/arch/arm/mach-omap2/usb.h deleted file mode 100644 index 740a499befce..000000000000 --- a/arch/arm/mach-omap2/usb.h +++ /dev/null @@ -1,71 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#include - -/* AM35x */ -/* USB 2.0 PHY Control */ -#define CONF2_PHY_GPIOMODE (1 << 23) -#define CONF2_OTGMODE (3 << 14) -#define CONF2_NO_OVERRIDE (0 << 14) -#define CONF2_FORCE_HOST (1 << 14) -#define CONF2_FORCE_DEVICE (2 << 14) -#define CONF2_FORCE_HOST_VBUS_LOW (3 << 14) -#define CONF2_SESENDEN (1 << 13) -#define CONF2_VBDTCTEN (1 << 12) -#define CONF2_REFFREQ_24MHZ (2 << 8) -#define CONF2_REFFREQ_26MHZ (7 << 8) -#define CONF2_REFFREQ_13MHZ (6 << 8) -#define CONF2_REFFREQ (0xf << 8) -#define CONF2_PHYCLKGD (1 << 7) -#define CONF2_VBUSSENSE (1 << 6) -#define CONF2_PHY_PLLON (1 << 5) -#define CONF2_RESET (1 << 4) -#define CONF2_PHYPWRDN (1 << 3) -#define CONF2_OTGPWRDN (1 << 2) -#define CONF2_DATPOL (1 << 1) - -/* TI81XX specific definitions */ -#define USBCTRL0 0x620 -#define USBSTAT0 0x624 - -/* TI816X PHY controls bits */ -#define TI816X_USBPHY0_NORMAL_MODE (1 << 0) -#define TI816X_USBPHY_REFCLK_OSC (1 << 8) - -/* TI814X PHY controls bits */ -#define USBPHY_CM_PWRDN (1 << 0) -#define USBPHY_OTG_PWRDN (1 << 1) -#define USBPHY_CHGDET_DIS (1 << 2) -#define USBPHY_CHGDET_RSTRT (1 << 3) -#define USBPHY_SRCONDM (1 << 4) -#define USBPHY_SINKONDP (1 << 5) -#define USBPHY_CHGISINK_EN (1 << 6) -#define USBPHY_CHGVSRC_EN (1 << 7) -#define USBPHY_DMPULLUP (1 << 8) -#define USBPHY_DPPULLUP (1 << 9) -#define USBPHY_CDET_EXTCTL (1 << 10) -#define USBPHY_GPIO_MODE (1 << 12) -#define USBPHY_DPOPBUFCTL (1 << 13) -#define USBPHY_DMOPBUFCTL (1 << 14) -#define USBPHY_DPINPUT (1 << 15) -#define USBPHY_DMINPUT (1 << 16) -#define USBPHY_DPGPIO_PD (1 << 17) -#define USBPHY_DMGPIO_PD (1 << 18) -#define USBPHY_OTGVDET_EN (1 << 19) -#define USBPHY_OTGSESSEND_EN (1 << 20) -#define USBPHY_DATA_POLARITY (1 << 23) - -struct usbhs_phy_data { - int port; /* 1 indexed port number */ - int reset_gpio; - int vcc_gpio; - bool vcc_polarity; /* 1 active high, 0 active low */ -}; - -extern void usb_musb_init(struct omap_musb_board_data *board_data); -extern void usbhs_init(struct usbhs_omap_platform_data *pdata); -extern int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys); - -extern void am35x_musb_reset(void); -extern void am35x_musb_phy_power(u8 on); -extern void am35x_musb_clear_irq(void); -extern void am35x_set_mode(u8 musb_mode); -- cgit v1.2.1