From 2b29a9fdcb92bfc6b6f4c412d71505869de61a56 Mon Sep 17 00:00:00 2001 From: Dominik Dingel Date: Fri, 26 Jul 2013 15:04:00 +0200 Subject: KVM: s390: move kvm_guest_enter,exit closer to sie Any uaccess between guest_enter and guest_exit could trigger a page fault, the page fault handler would handle it as a guest fault and translate a user address as guest address. Signed-off-by: Dominik Dingel Signed-off-by: Christian Borntraeger CC: stable@vger.kernel.org Signed-off-by: Paolo Bonzini --- arch/s390/kvm/kvm-s390.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index ba694d2ba51e..34c1c9a90be2 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -702,14 +702,25 @@ static int __vcpu_run(struct kvm_vcpu *vcpu) return rc; vcpu->arch.sie_block->icptcode = 0; - preempt_disable(); - kvm_guest_enter(); - preempt_enable(); VCPU_EVENT(vcpu, 6, "entering sie flags %x", atomic_read(&vcpu->arch.sie_block->cpuflags)); trace_kvm_s390_sie_enter(vcpu, atomic_read(&vcpu->arch.sie_block->cpuflags)); + + /* + * As PF_VCPU will be used in fault handler, between guest_enter + * and guest_exit should be no uaccess. + */ + preempt_disable(); + kvm_guest_enter(); + preempt_enable(); rc = sie64a(vcpu->arch.sie_block, vcpu->run->s.regs.gprs); + kvm_guest_exit(); + + VCPU_EVENT(vcpu, 6, "exit sie icptcode %d", + vcpu->arch.sie_block->icptcode); + trace_kvm_s390_sie_exit(vcpu, vcpu->arch.sie_block->icptcode); + if (rc > 0) rc = 0; if (rc < 0) { @@ -721,10 +732,6 @@ static int __vcpu_run(struct kvm_vcpu *vcpu) rc = kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING); } } - VCPU_EVENT(vcpu, 6, "exit sie icptcode %d", - vcpu->arch.sie_block->icptcode); - trace_kvm_s390_sie_exit(vcpu, vcpu->arch.sie_block->icptcode); - kvm_guest_exit(); memcpy(&vcpu->run->s.regs.gprs[14], &vcpu->arch.sie_block->gg14, 16); return rc; -- cgit v1.2.1 From e769ece3b129698d2b09811a6f6d304e4eaa8c29 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 26 Jul 2013 15:04:01 +0200 Subject: KVM: s390: fix pfmf non-quiescing control handling Fix the test within handle_pfmf() if the host has the NQ key-setting facility installed. Right now the code would incorrectly generate a program check in the guest if the NQ control bit for a pfmf request was set and if the host has the NQ key-setting facility installed. Signed-off-by: Heiko Carstens Reviewed-by: Thomas Huth Signed-off-by: Christian Borntraeger Signed-off-by: Paolo Bonzini --- arch/s390/kvm/priv.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c index 0da3e6eb6be6..4cdc54e63ebc 100644 --- a/arch/s390/kvm/priv.c +++ b/arch/s390/kvm/priv.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -532,8 +533,7 @@ static int handle_pfmf(struct kvm_vcpu *vcpu) return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION); /* Only provide non-quiescing support if the host supports it */ - if (vcpu->run->s.regs.gprs[reg1] & PFMF_NQ && - S390_lowcore.stfl_fac_list & 0x00020000) + if (vcpu->run->s.regs.gprs[reg1] & PFMF_NQ && !test_facility(14)) return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION); /* No support for conditional-SSKE */ -- cgit v1.2.1 From 4e90a2a7375e86827541bda9393414c03e7721c6 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Wed, 31 Jul 2013 16:31:26 +1000 Subject: powerpc: On POWERNV enable PPC_DENORMALISATION by default We want PPC_DENORMALISATION enabled when POWERNV is enabled, so update the Kconfig. Signed-off-by: Anton Blanchard Acked-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt CC: --- arch/powerpc/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 3bf72cd2c8fc..dbd9d3c991e8 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -566,7 +566,7 @@ config SCHED_SMT config PPC_DENORMALISATION bool "PowerPC denormalisation exception handling" depends on PPC_BOOK3S_64 - default "n" + default "y" if PPC_POWERNV ---help--- Add support for handling denormalisation of single precision values. Useful for bare metal only. If unsure say Y here. -- cgit v1.2.1 From 7e76f34fa103677a27d96a7cfef8ce61389a32de Mon Sep 17 00:00:00 2001 From: Aruna Balakrishnaiah Date: Thu, 8 Aug 2013 22:33:49 +0530 Subject: powerpc/pseries: Fix buffer overflow when reading from pstore When reading from pstore there is a buffer overflow during decompression due to the header added in unzip_oops. Remove unzip_oops and call pstore_decompress directly in nvram_pstore_read. Allocate buffer of size report_length of the oops header as header will not be deallocated in pstore. Since we have 'openssl' command line tool to decompress the compressed data, dump the compressed data in case decompression fails instead of not dumping anything. Signed-off-by: Aruna Balakrishnaiah Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/nvram.c | 70 ++++++++++++---------------------- 1 file changed, 24 insertions(+), 46 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/pseries/nvram.c b/arch/powerpc/platforms/pseries/nvram.c index 9f8671a44551..893f36053c97 100644 --- a/arch/powerpc/platforms/pseries/nvram.c +++ b/arch/powerpc/platforms/pseries/nvram.c @@ -569,35 +569,6 @@ error: return ret; } -static int unzip_oops(char *oops_buf, char *big_buf) -{ - struct oops_log_info *oops_hdr = (struct oops_log_info *)oops_buf; - u64 timestamp = oops_hdr->timestamp; - char *big_oops_data = NULL; - char *oops_data_buf = NULL; - size_t big_oops_data_sz; - int unzipped_len; - - big_oops_data = big_buf + sizeof(struct oops_log_info); - big_oops_data_sz = big_oops_buf_sz - sizeof(struct oops_log_info); - oops_data_buf = oops_buf + sizeof(struct oops_log_info); - - unzipped_len = nvram_decompress(oops_data_buf, big_oops_data, - oops_hdr->report_length, - big_oops_data_sz); - - if (unzipped_len < 0) { - pr_err("nvram: decompression failed; returned %d\n", - unzipped_len); - return -1; - } - oops_hdr = (struct oops_log_info *)big_buf; - oops_hdr->version = OOPS_HDR_VERSION; - oops_hdr->report_length = (u16) unzipped_len; - oops_hdr->timestamp = timestamp; - return 0; -} - static int nvram_pstore_open(struct pstore_info *psi) { /* Reset the iterator to start reading partitions again */ @@ -685,10 +656,9 @@ static ssize_t nvram_pstore_read(u64 *id, enum pstore_type_id *type, unsigned int err_type, id_no, size = 0; struct nvram_os_partition *part = NULL; char *buff = NULL, *big_buff = NULL; - int rc, sig = 0; + int sig = 0; loff_t p; -read_partition: read_type++; switch (nvram_type_ids[read_type]) { @@ -749,30 +719,36 @@ read_partition: *id = id_no; if (nvram_type_ids[read_type] == PSTORE_TYPE_DMESG) { + int length, unzipped_len; + oops_hdr = (struct oops_log_info *)buff; - *buf = buff + sizeof(*oops_hdr); + length = oops_hdr->report_length; + *buf = kmalloc(length, GFP_KERNEL); + if (*buf == NULL) + return -ENOMEM; + memcpy(*buf, buff + sizeof(*oops_hdr), length); + time->tv_sec = oops_hdr->timestamp; + time->tv_nsec = 0; + kfree(buff); if (err_type == ERR_TYPE_KERNEL_PANIC_GZ) { big_buff = kmalloc(big_oops_buf_sz, GFP_KERNEL); if (!big_buff) return -ENOMEM; - rc = unzip_oops(buff, big_buff); + unzipped_len = nvram_decompress(*buf, big_buff, + length, big_oops_buf_sz); - if (rc != 0) { - kfree(buff); + if (unzipped_len < 0) { + pr_err("nvram: decompression failed, returned " + "rc %d\n", unzipped_len); kfree(big_buff); - goto read_partition; + } else { + *buf = big_buff; + length = unzipped_len; } - - oops_hdr = (struct oops_log_info *)big_buff; - *buf = big_buff + sizeof(*oops_hdr); - kfree(buff); } - - time->tv_sec = oops_hdr->timestamp; - time->tv_nsec = 0; - return oops_hdr->report_length; + return length; } *buf = buff; @@ -816,6 +792,7 @@ static int nvram_pstore_init(void) static void __init nvram_init_oops_partition(int rtas_partition_exists) { int rc; + size_t size; rc = pseries_nvram_init_os_partition(&oops_log_partition); if (rc != 0) { @@ -844,8 +821,9 @@ static void __init nvram_init_oops_partition(int rtas_partition_exists) big_oops_buf_sz = (oops_data_sz * 100) / 45; big_oops_buf = kmalloc(big_oops_buf_sz, GFP_KERNEL); if (big_oops_buf) { - stream.workspace = kmalloc(zlib_deflate_workspacesize( - WINDOW_BITS, MEM_LEVEL), GFP_KERNEL); + size = max(zlib_deflate_workspacesize(WINDOW_BITS, MEM_LEVEL), + zlib_inflate_workspacesize()); + stream.workspace = kmalloc(size, GFP_KERNEL); if (!stream.workspace) { pr_err("nvram: No memory for compression workspace; " "skipping compression of %s partition data\n", -- cgit v1.2.1 From 156c9ebdaca20d9ce428dc189f2b24d2a0ec8eaf Mon Sep 17 00:00:00 2001 From: Aruna Balakrishnaiah Date: Thu, 8 Aug 2013 22:34:00 +0530 Subject: powerpc/pseries: Add backward compatibilty to read old kernel oops-log Older kernels has just length information in their header. Handle it while reading old kernel oops log from pstore. Applies on top of powerpc/pseries: Fix buffer overflow when reading from pstore Signed-off-by: Aruna Balakrishnaiah Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/nvram.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/pseries/nvram.c b/arch/powerpc/platforms/pseries/nvram.c index 893f36053c97..6a5f2b1f32ca 100644 --- a/arch/powerpc/platforms/pseries/nvram.c +++ b/arch/powerpc/platforms/pseries/nvram.c @@ -720,15 +720,25 @@ static ssize_t nvram_pstore_read(u64 *id, enum pstore_type_id *type, if (nvram_type_ids[read_type] == PSTORE_TYPE_DMESG) { int length, unzipped_len; + size_t hdr_size; oops_hdr = (struct oops_log_info *)buff; - length = oops_hdr->report_length; + if (oops_hdr->version < OOPS_HDR_VERSION) { + /* Old format oops header had 2-byte record size */ + hdr_size = sizeof(u16); + length = oops_hdr->version; + time->tv_sec = 0; + time->tv_nsec = 0; + } else { + hdr_size = sizeof(*oops_hdr); + length = oops_hdr->report_length; + time->tv_sec = oops_hdr->timestamp; + time->tv_nsec = 0; + } *buf = kmalloc(length, GFP_KERNEL); if (*buf == NULL) return -ENOMEM; - memcpy(*buf, buff + sizeof(*oops_hdr), length); - time->tv_sec = oops_hdr->timestamp; - time->tv_nsec = 0; + memcpy(*buf, buff + hdr_size, length); kfree(buff); if (err_type == ERR_TYPE_KERNEL_PANIC_GZ) { -- cgit v1.2.1 From 144136dd7a25a0ca4d86685f872168502f91f337 Mon Sep 17 00:00:00 2001 From: Mike Qiu Date: Tue, 6 Aug 2013 22:25:14 -0400 Subject: powerpc/eeh: Add missing procfs entry for PowerNV The procfs entry for global statistics has been missed on PowerNV platform and the patch is going to add that. Signed-off-by: Mike Qiu Acked-by: Gavin Shan Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/eeh.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c index ea9414c8088d..55593ee2d5aa 100644 --- a/arch/powerpc/kernel/eeh.c +++ b/arch/powerpc/kernel/eeh.c @@ -1061,7 +1061,7 @@ static const struct file_operations proc_eeh_operations = { static int __init eeh_init_proc(void) { - if (machine_is(pseries)) + if (machine_is(pseries) || machine_is(powernv)) proc_create("powerpc/eeh", 0, NULL, &proc_eeh_operations); return 0; } -- cgit v1.2.1 From 2fb10672c828f6e08f1dbe3690167300035adddc Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Mon, 22 Jul 2013 14:32:35 +0800 Subject: powerpc/kvm: Add signed type cast for comparation 'rmls' is 'unsigned long', lpcr_rmls() will return negative number when failure occurs, so it need a type cast for comparing. 'lpid' is 'unsigned long', kvmppc_alloc_lpid() return negative number when failure occurs, so it need a type cast for comparing. Signed-off-by: Chen Gang Acked-by: Paul Mackerras Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kvm/book3s_hv.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c index 2efa9dde741a..7629cd3eb91a 100644 --- a/arch/powerpc/kvm/book3s_hv.c +++ b/arch/powerpc/kvm/book3s_hv.c @@ -1809,7 +1809,7 @@ static int kvmppc_hv_setup_htab_rma(struct kvm_vcpu *vcpu) rma_size <<= PAGE_SHIFT; rmls = lpcr_rmls(rma_size); err = -EINVAL; - if (rmls < 0) { + if ((long)rmls < 0) { pr_err("KVM: Can't use RMA of 0x%lx bytes\n", rma_size); goto out_srcu; } @@ -1874,7 +1874,7 @@ int kvmppc_core_init_vm(struct kvm *kvm) /* Allocate the guest's logical partition ID */ lpid = kvmppc_alloc_lpid(); - if (lpid < 0) + if ((long)lpid < 0) return -ENOMEM; kvm->arch.lpid = lpid; -- cgit v1.2.1 From e0e13614626bfb5a88678fd951d728ed40e3cbf6 Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Wed, 17 Jul 2013 12:10:29 -0300 Subject: powerpc/kvm/book3s_pr: Return appropriate error when allocation fails err was overwritten by a previous function call, and checked to be 0. If the following page allocation fails, 0 is going to be returned instead of -ENOMEM. Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kvm/book3s_pr.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kvm/book3s_pr.c b/arch/powerpc/kvm/book3s_pr.c index 19498a567a81..c6e13d9a9e15 100644 --- a/arch/powerpc/kvm/book3s_pr.c +++ b/arch/powerpc/kvm/book3s_pr.c @@ -1047,11 +1047,12 @@ struct kvm_vcpu *kvmppc_core_vcpu_create(struct kvm *kvm, unsigned int id) if (err) goto free_shadow_vcpu; + err = -ENOMEM; p = __get_free_page(GFP_KERNEL|__GFP_ZERO); - /* the real shared page fills the last 4k of our page */ - vcpu->arch.shared = (void*)(p + PAGE_SIZE - 4096); if (!p) goto uninit_vcpu; + /* the real shared page fills the last 4k of our page */ + vcpu->arch.shared = (void *)(p + PAGE_SIZE - 4096); #ifdef CONFIG_PPC_BOOK3S_64 /* default to book3s_64 (970fx) */ -- cgit v1.2.1 From 88f094120bd2f012ff494ae50a8d4e0d8af8f69e Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Fri, 9 Aug 2013 17:29:27 +1000 Subject: powerpc: Fix hypervisor facility unavaliable vector number Currently if we take hypervisor facility unavaliable (from 0xf80/0x4f80) we mark it as an OS facility unavaliable (0xf60) as the two share the same code path. The becomes a problem in facility_unavailable_exception() as we aren't able to see the hypervisor facility unavailable exceptions. Below fixes this by duplication the required macros. Signed-off-by: Michael Neuling Cc: [v3.10] Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/exceptions-64s.S | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index 4e00d223b2e3..902ca3c6b4b6 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -848,7 +848,7 @@ hv_facility_unavailable_relon_trampoline: . = 0x4f80 SET_SCRATCH0(r13) EXCEPTION_PROLOG_0(PACA_EXGEN) - b facility_unavailable_relon_hv + b hv_facility_unavailable_relon_hv STD_RELON_EXCEPTION_PSERIES(0x5300, 0x1300, instruction_breakpoint) #ifdef CONFIG_PPC_DENORMALISATION @@ -1175,6 +1175,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX) b .ret_from_except STD_EXCEPTION_COMMON(0xf60, facility_unavailable, .facility_unavailable_exception) + STD_EXCEPTION_COMMON(0xf80, hv_facility_unavailable, .facility_unavailable_exception) .align 7 .globl __end_handlers @@ -1188,7 +1189,7 @@ __end_handlers: STD_RELON_EXCEPTION_PSERIES_OOL(0xf20, altivec_unavailable) STD_RELON_EXCEPTION_PSERIES_OOL(0xf40, vsx_unavailable) STD_RELON_EXCEPTION_PSERIES_OOL(0xf60, facility_unavailable) - STD_RELON_EXCEPTION_HV_OOL(0xf80, facility_unavailable) + STD_RELON_EXCEPTION_HV_OOL(0xf80, hv_facility_unavailable) #if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) /* -- cgit v1.2.1 From 74e400cee6c0266ba2d940ed78d981f1e24a8167 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Fri, 9 Aug 2013 17:29:28 +1000 Subject: powerpc: Rework setting up H/FSCR bit definitions This reworks the Facility Status and Control Regsiter (FSCR) config bit definitions so that we can access the bit numbers. This is needed for a subsequent patch to fix the userspace DSCR handling. HFSCR and FSCR bit definitions are the same, so reuse them. Signed-off-by: Michael Neuling Cc: [v3.10] Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/reg.h | 31 ++++++++++++++++++++----------- 1 file changed, 20 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index a6840e4e24f7..99222e27f173 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -254,19 +254,28 @@ #define SPRN_HRMOR 0x139 /* Real mode offset register */ #define SPRN_HSRR0 0x13A /* Hypervisor Save/Restore 0 */ #define SPRN_HSRR1 0x13B /* Hypervisor Save/Restore 1 */ +/* HFSCR and FSCR bit numbers are the same */ +#define FSCR_TAR_LG 8 /* Enable Target Address Register */ +#define FSCR_EBB_LG 7 /* Enable Event Based Branching */ +#define FSCR_TM_LG 5 /* Enable Transactional Memory */ +#define FSCR_PM_LG 4 /* Enable prob/priv access to PMU SPRs */ +#define FSCR_BHRB_LG 3 /* Enable Branch History Rolling Buffer*/ +#define FSCR_DSCR_LG 2 /* Enable Data Stream Control Register */ +#define FSCR_VECVSX_LG 1 /* Enable VMX/VSX */ +#define FSCR_FP_LG 0 /* Enable Floating Point */ #define SPRN_FSCR 0x099 /* Facility Status & Control Register */ -#define FSCR_TAR (1 << (63-55)) /* Enable Target Address Register */ -#define FSCR_EBB (1 << (63-56)) /* Enable Event Based Branching */ -#define FSCR_DSCR (1 << (63-61)) /* Enable Data Stream Control Register */ +#define FSCR_TAR __MASK(FSCR_TAR_LG) +#define FSCR_EBB __MASK(FSCR_EBB_LG) +#define FSCR_DSCR __MASK(FSCR_DSCR_LG) #define SPRN_HFSCR 0xbe /* HV=1 Facility Status & Control Register */ -#define HFSCR_TAR (1 << (63-55)) /* Enable Target Address Register */ -#define HFSCR_EBB (1 << (63-56)) /* Enable Event Based Branching */ -#define HFSCR_TM (1 << (63-58)) /* Enable Transactional Memory */ -#define HFSCR_PM (1 << (63-60)) /* Enable prob/priv access to PMU SPRs */ -#define HFSCR_BHRB (1 << (63-59)) /* Enable Branch History Rolling Buffer*/ -#define HFSCR_DSCR (1 << (63-61)) /* Enable Data Stream Control Register */ -#define HFSCR_VECVSX (1 << (63-62)) /* Enable VMX/VSX */ -#define HFSCR_FP (1 << (63-63)) /* Enable Floating Point */ +#define HFSCR_TAR __MASK(FSCR_TAR_LG) +#define HFSCR_EBB __MASK(FSCR_EBB_LG) +#define HFSCR_TM __MASK(FSCR_TM_LG) +#define HFSCR_PM __MASK(FSCR_PM_LG) +#define HFSCR_BHRB __MASK(FSCR_BHRB_LG) +#define HFSCR_DSCR __MASK(FSCR_DSCR_LG) +#define HFSCR_VECVSX __MASK(FSCR_VECVSX_LG) +#define HFSCR_FP __MASK(FSCR_FP_LG) #define SPRN_TAR 0x32f /* Target Address Register */ #define SPRN_LPCR 0x13E /* LPAR Control Register */ #define LPCR_VPM0 (1ul << (63-0)) -- cgit v1.2.1 From 2517617e0de65f8f7cfe75cae745d06b1fa98586 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Fri, 9 Aug 2013 17:29:29 +1000 Subject: powerpc: Fix context switch DSCR on POWER8 POWER8 allows the DSCR to be accessed directly from userspace via a new SPR number 0x3 (Rather than 0x11. DSCR SPR number 0x11 is still used on POWER8 but like POWER7, is only accessible in HV and OS modes). Currently, we allow this by setting H/FSCR DSCR bit on boot. Unfortunately this doesn't work, as the kernel needs to see the DSCR change so that it knows to no longer restore the system wide version of DSCR on context switch (ie. to set thread.dscr_inherit). This clears the H/FSCR DSCR bit initially. If a process then accesses the DSCR (via SPR 0x3), it'll trap into the kernel where we set thread.dscr_inherit in facility_unavailable_exception(). We also change _switch() so that we set or clear the H/FSCR DSCR bit based on the thread.dscr_inherit. Signed-off-by: Michael Neuling Cc: [v3.10] Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/entry_64.S | 27 +++++++++++++++++++- arch/powerpc/kernel/traps.c | 58 +++++++++++++++++++++++++----------------- 2 files changed, 60 insertions(+), 25 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index ab15b8d057ad..4674fe647ad7 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -584,9 +584,34 @@ BEGIN_FTR_SECTION ld r7,DSCR_DEFAULT@toc(2) ld r0,THREAD_DSCR(r4) cmpwi r6,0 + li r8, FSCR_DSCR bne 1f ld r0,0(r7) -1: cmpd r0,r25 + b 3f +1: + BEGIN_FTR_SECTION_NESTED(70) + mfspr r6, SPRN_FSCR + or r6, r6, r8 + mtspr SPRN_FSCR, r6 + BEGIN_FTR_SECTION_NESTED(69) + mfspr r6, SPRN_HFSCR + or r6, r6, r8 + mtspr SPRN_HFSCR, r6 + END_FTR_SECTION_NESTED(CPU_FTR_HVMODE, CPU_FTR_HVMODE, 69) + b 4f + END_FTR_SECTION_NESTED(CPU_FTR_ARCH_207S, CPU_FTR_ARCH_207S, 70) +3: + BEGIN_FTR_SECTION_NESTED(70) + mfspr r6, SPRN_FSCR + andc r6, r6, r8 + mtspr SPRN_FSCR, r6 + BEGIN_FTR_SECTION_NESTED(69) + mfspr r6, SPRN_HFSCR + andc r6, r6, r8 + mtspr SPRN_HFSCR, r6 + END_FTR_SECTION_NESTED(CPU_FTR_HVMODE, CPU_FTR_HVMODE, 69) + END_FTR_SECTION_NESTED(CPU_FTR_ARCH_207S, CPU_FTR_ARCH_207S, 70) +4: cmpd r0,r25 beq 2f mtspr SPRN_DSCR,r0 2: diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index bf33c22e38a4..e435bc089ea3 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -44,9 +44,7 @@ #include #include #include -#ifdef CONFIG_PPC32 #include -#endif #ifdef CONFIG_PMAC_BACKLIGHT #include #endif @@ -1296,43 +1294,54 @@ void vsx_unavailable_exception(struct pt_regs *regs) die("Unrecoverable VSX Unavailable Exception", regs, SIGABRT); } +#ifdef CONFIG_PPC64 void facility_unavailable_exception(struct pt_regs *regs) { static char *facility_strings[] = { - "FPU", - "VMX/VSX", - "DSCR", - "PMU SPRs", - "BHRB", - "TM", - "AT", - "EBB", - "TAR", + [FSCR_FP_LG] = "FPU", + [FSCR_VECVSX_LG] = "VMX/VSX", + [FSCR_DSCR_LG] = "DSCR", + [FSCR_PM_LG] = "PMU SPRs", + [FSCR_BHRB_LG] = "BHRB", + [FSCR_TM_LG] = "TM", + [FSCR_EBB_LG] = "EBB", + [FSCR_TAR_LG] = "TAR", }; - char *facility, *prefix; + char *facility = "unknown"; u64 value; + u8 status; + bool hv; - if (regs->trap == 0xf60) { - value = mfspr(SPRN_FSCR); - prefix = ""; - } else { + hv = (regs->trap == 0xf80); + if (hv) value = mfspr(SPRN_HFSCR); - prefix = "Hypervisor "; + else + value = mfspr(SPRN_FSCR); + + status = value >> 56; + if (status == FSCR_DSCR_LG) { + /* User is acessing the DSCR. Set the inherit bit and allow + * the user to set it directly in future by setting via the + * H/FSCR DSCR bit. + */ + current->thread.dscr_inherit = 1; + if (hv) + mtspr(SPRN_HFSCR, value | HFSCR_DSCR); + else + mtspr(SPRN_FSCR, value | FSCR_DSCR); + return; } - value = value >> 56; + if ((status < ARRAY_SIZE(facility_strings)) && + facility_strings[status]) + facility = facility_strings[status]; /* We restore the interrupt state now */ if (!arch_irq_disabled_regs(regs)) local_irq_enable(); - if (value < ARRAY_SIZE(facility_strings)) - facility = facility_strings[value]; - else - facility = "unknown"; - pr_err("%sFacility '%s' unavailable, exception at 0x%lx, MSR=%lx\n", - prefix, facility, regs->nip, regs->msr); + hv ? "Hypervisor " : "", facility, regs->nip, regs->msr); if (user_mode(regs)) { _exception(SIGILL, regs, ILL_ILLOPC, regs->nip); @@ -1341,6 +1350,7 @@ void facility_unavailable_exception(struct pt_regs *regs) die("Unexpected facility unavailable exception", regs, SIGABRT); } +#endif #ifdef CONFIG_PPC_TRANSACTIONAL_MEM -- cgit v1.2.1 From c2d52644e2da8a07ecab5ca62dd0bc563089e8dc Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Fri, 9 Aug 2013 17:29:30 +1000 Subject: powerpc: Save the TAR register earlier This moves us to save the Target Address Register (TAR) a earlier in __switch_to. It introduces a new function save_tar() to do this. We need to save the TAR earlier as we will overwrite it in the transactional memory reclaim/recheckpoint path. We are going to do this in a subsequent patch which will fix saving the TAR register when it's modified inside a transaction. Signed-off-by: Michael Neuling Cc: [v3.10] Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/switch_to.h | 9 +++++++++ arch/powerpc/kernel/entry_64.S | 9 --------- arch/powerpc/kernel/process.c | 10 ++++++++++ 3 files changed, 19 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/switch_to.h b/arch/powerpc/include/asm/switch_to.h index 49a13e0ef234..294c2cedcf7a 100644 --- a/arch/powerpc/include/asm/switch_to.h +++ b/arch/powerpc/include/asm/switch_to.h @@ -15,6 +15,15 @@ extern struct task_struct *__switch_to(struct task_struct *, struct thread_struct; extern struct task_struct *_switch(struct thread_struct *prev, struct thread_struct *next); +#ifdef CONFIG_PPC_BOOK3S_64 +static inline void save_tar(struct thread_struct *prev) +{ + if (cpu_has_feature(CPU_FTR_ARCH_207S)) + prev->tar = mfspr(SPRN_TAR); +} +#else +static inline void save_tar(struct thread_struct *prev) {} +#endif extern void giveup_fpu(struct task_struct *); extern void load_up_fpu(void); diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 4674fe647ad7..2bd0b885b0fe 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -449,15 +449,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_DSCR) #ifdef CONFIG_PPC_BOOK3S_64 BEGIN_FTR_SECTION - /* - * Back up the TAR across context switches. Note that the TAR is not - * available for use in the kernel. (To provide this, the TAR should - * be backed up/restored on exception entry/exit instead, and be in - * pt_regs. FIXME, this should be in pt_regs anyway (for debug).) - */ - mfspr r0,SPRN_TAR - std r0,THREAD_TAR(r3) - /* Event based branch registers */ mfspr r0, SPRN_BESCR std r0, THREAD_BESCR(r3) diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index c517dbe705fd..8083be20fe5e 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -600,6 +600,16 @@ struct task_struct *__switch_to(struct task_struct *prev, struct ppc64_tlb_batch *batch; #endif + /* Back up the TAR across context switches. + * Note that the TAR is not available for use in the kernel. (To + * provide this, the TAR should be backed up/restored on exception + * entry/exit instead, and be in pt_regs. FIXME, this should be in + * pt_regs anyway (for debug).) + * Save the TAR here before we do treclaim/trecheckpoint as these + * will change the TAR. + */ + save_tar(&prev->thread); + __switch_to_tm(prev); #ifdef CONFIG_SMP -- cgit v1.2.1 From 28e61cc466d8daace4b0f04ba2b83e0bd68f5832 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Fri, 9 Aug 2013 17:29:31 +1000 Subject: powerpc/tm: Fix context switching TAR, PPR and DSCR SPRs If a transaction is rolled back, the Target Address Register (TAR), Processor Priority Register (PPR) and Data Stream Control Register (DSCR) should be restored to the checkpointed values before the transaction began. Any changes to these SPRs inside the transaction should not be visible in the abort handler. Currently Linux doesn't save or restore the checkpointed TAR, PPR or DSCR. If we preempt a processes inside a transaction which has modified any of these, on process restore, that same transaction may be aborted we but we won't see the checkpointed versions of these SPRs. This adds checkpointed versions of these SPRs to the thread_struct and adds the save/restore of these three SPRs to the treclaim/trechkpt code. Without this if any of these SPRs are modified during a transaction, users may incorrectly see a speculated SPR value even if the transaction is aborted. Signed-off-by: Michael Neuling Cc: [v3.10] Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/processor.h | 4 ++++ arch/powerpc/kernel/asm-offsets.c | 3 +++ arch/powerpc/kernel/tm.S | 20 ++++++++++++++++++++ 3 files changed, 27 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 47a35b08b963..e378cccfca55 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -247,6 +247,10 @@ struct thread_struct { unsigned long tm_orig_msr; /* Thread's MSR on ctx switch */ struct pt_regs ckpt_regs; /* Checkpointed registers */ + unsigned long tm_tar; + unsigned long tm_ppr; + unsigned long tm_dscr; + /* * Transactional FP and VSX 0-31 register set. * NOTE: the sense of these is the opposite of the integer ckpt_regs! diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index c7e8afc2ead0..8207459efe56 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -138,6 +138,9 @@ int main(void) DEFINE(THREAD_TM_TFHAR, offsetof(struct thread_struct, tm_tfhar)); DEFINE(THREAD_TM_TEXASR, offsetof(struct thread_struct, tm_texasr)); DEFINE(THREAD_TM_TFIAR, offsetof(struct thread_struct, tm_tfiar)); + DEFINE(THREAD_TM_TAR, offsetof(struct thread_struct, tm_tar)); + DEFINE(THREAD_TM_PPR, offsetof(struct thread_struct, tm_ppr)); + DEFINE(THREAD_TM_DSCR, offsetof(struct thread_struct, tm_dscr)); DEFINE(PT_CKPT_REGS, offsetof(struct thread_struct, ckpt_regs)); DEFINE(THREAD_TRANSACT_VR0, offsetof(struct thread_struct, transact_vr[0])); diff --git a/arch/powerpc/kernel/tm.S b/arch/powerpc/kernel/tm.S index 51be8fb24803..0554d1f6d70d 100644 --- a/arch/powerpc/kernel/tm.S +++ b/arch/powerpc/kernel/tm.S @@ -233,6 +233,16 @@ dont_backup_fp: std r5, _CCR(r7) std r6, _XER(r7) + + /* ******************** TAR, PPR, DSCR ********** */ + mfspr r3, SPRN_TAR + mfspr r4, SPRN_PPR + mfspr r5, SPRN_DSCR + + std r3, THREAD_TM_TAR(r12) + std r4, THREAD_TM_PPR(r12) + std r5, THREAD_TM_DSCR(r12) + /* MSR and flags: We don't change CRs, and we don't need to alter * MSR. */ @@ -347,6 +357,16 @@ dont_restore_fp: mtmsr r6 /* FP/Vec off again! */ restore_gprs: + + /* ******************** TAR, PPR, DSCR ********** */ + ld r4, THREAD_TM_TAR(r3) + ld r5, THREAD_TM_PPR(r3) + ld r6, THREAD_TM_DSCR(r3) + + mtspr SPRN_TAR, r4 + mtspr SPRN_PPR, r5 + mtspr SPRN_DSCR, r6 + /* ******************** CR,LR,CCR,MSR ********** */ ld r3, _CTR(r7) ld r4, _LINK(r7) -- cgit v1.2.1 From 8c6b79bb1211d91fb31bcbc2a1eea8d6963d3ad9 Mon Sep 17 00:00:00 2001 From: Torsten Kaiser Date: Tue, 23 Jul 2013 19:40:49 +0200 Subject: x86, microcode, AMD: Make cpu_has_amd_erratum() use the correct struct cpuinfo_x86 cpu_has_amd_erratum() is buggy, because it uses the per-cpu cpu_info before it is filled by smp_store_boot_cpu_info() / smp_store_cpu_info(). If early microcode loading is enabled its collect_cpu_info_amd_early() will fill ->x86 and so the fallback to boot_cpu_data is not used. But ->x86_vendor was not filled and is still X86_VENDOR_INTEL resulting in no errata fixes getting applied and my system hangs on boot. Using cpu_info in cpu_has_amd_erratum() is wrong anyway: its only caller init_amd() will have a struct cpuinfo_x86 as parameter and the set_cpu_bug() that is controlled by cpu_has_amd_erratum() also only uses that struct. So pass the struct cpuinfo_x86 from init_amd() to cpu_has_amd_erratum() and the broken fallback can be dropped. [ Boris: Drop WARN_ON() since we're called only from init_amd() ] Signed-off-by: Torsten Kaiser Signed-off-by: Borislav Petkov --- arch/x86/kernel/cpu/amd.c | 20 +++++--------------- 1 file changed, 5 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index f654ecefea5b..08a089043ccf 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -512,7 +512,7 @@ static void early_init_amd(struct cpuinfo_x86 *c) static const int amd_erratum_383[]; static const int amd_erratum_400[]; -static bool cpu_has_amd_erratum(const int *erratum); +static bool cpu_has_amd_erratum(struct cpuinfo_x86 *cpu, const int *erratum); static void init_amd(struct cpuinfo_x86 *c) { @@ -729,11 +729,11 @@ static void init_amd(struct cpuinfo_x86 *c) value &= ~(1ULL << 24); wrmsrl_safe(MSR_AMD64_BU_CFG2, value); - if (cpu_has_amd_erratum(amd_erratum_383)) + if (cpu_has_amd_erratum(c, amd_erratum_383)) set_cpu_bug(c, X86_BUG_AMD_TLB_MMATCH); } - if (cpu_has_amd_erratum(amd_erratum_400)) + if (cpu_has_amd_erratum(c, amd_erratum_400)) set_cpu_bug(c, X86_BUG_AMD_APIC_C1E); rdmsr_safe(MSR_AMD64_PATCH_LEVEL, &c->microcode, &dummy); @@ -878,23 +878,13 @@ static const int amd_erratum_400[] = static const int amd_erratum_383[] = AMD_OSVW_ERRATUM(3, AMD_MODEL_RANGE(0x10, 0, 0, 0xff, 0xf)); -static bool cpu_has_amd_erratum(const int *erratum) + +static bool cpu_has_amd_erratum(struct cpuinfo_x86 *cpu, const int *erratum) { - struct cpuinfo_x86 *cpu = __this_cpu_ptr(&cpu_info); int osvw_id = *erratum++; u32 range; u32 ms; - /* - * If called early enough that current_cpu_data hasn't been initialized - * yet, fall back to boot_cpu_data. - */ - if (cpu->x86 == 0) - cpu = &boot_cpu_data; - - if (cpu->x86_vendor != X86_VENDOR_AMD) - return false; - if (osvw_id >= 0 && osvw_id < 65536 && cpu_has(cpu, X86_FEATURE_OSVW)) { u64 osvw_len; -- cgit v1.2.1 From 84516098b58e05821780dc0b89abcee434b4dca5 Mon Sep 17 00:00:00 2001 From: Torsten Kaiser Date: Thu, 8 Aug 2013 19:38:18 +0200 Subject: x86, microcode, AMD: Fix early microcode loading load_microcode_amd() (and the helper it is using) should not have an cpu parameter. The microcode loading does not depend on the CPU wrt the patches loaded since they will end up in a global list for all CPUs anyway. The change from cpu to x86family in load_microcode_amd() now allows to drop the code messing with cpu_data(cpu) from collect_cpu_info_amd_early(), which is wrong anyway because at that point the per-cpu cpu_info is not yet setup (These values would later be overwritten by smp_store_boot_cpu_info() / smp_store_cpu_info()). Fold the rest of collect_cpu_info_amd_early() into load_ucode_amd_ap(), because its only used at one place and without the cpuinfo_x86 accesses it was not much left. Signed-off-by: Torsten Kaiser [ Fengguang: build fix ] Signed-off-by: Fengguang Wu [ Boris: adapt it to current tree. ] Signed-off-by: Borislav Petkov --- arch/x86/include/asm/microcode_amd.h | 2 +- arch/x86/kernel/microcode_amd.c | 27 +++++++++++++-------------- arch/x86/kernel/microcode_amd_early.c | 27 +++++++++++++-------------- 3 files changed, 27 insertions(+), 29 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/microcode_amd.h b/arch/x86/include/asm/microcode_amd.h index 50e5c58ced23..4c019179a57d 100644 --- a/arch/x86/include/asm/microcode_amd.h +++ b/arch/x86/include/asm/microcode_amd.h @@ -59,7 +59,7 @@ static inline u16 find_equiv_id(struct equiv_cpu_entry *equiv_cpu_table, extern int __apply_microcode_amd(struct microcode_amd *mc_amd); extern int apply_microcode_amd(int cpu); -extern enum ucode_state load_microcode_amd(int cpu, const u8 *data, size_t size); +extern enum ucode_state load_microcode_amd(u8 family, const u8 *data, size_t size); #ifdef CONFIG_MICROCODE_AMD_EARLY #ifdef CONFIG_X86_32 diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c index 7a0adb7ee433..7123b5df479d 100644 --- a/arch/x86/kernel/microcode_amd.c +++ b/arch/x86/kernel/microcode_amd.c @@ -145,10 +145,9 @@ static int collect_cpu_info_amd(int cpu, struct cpu_signature *csig) return 0; } -static unsigned int verify_patch_size(int cpu, u32 patch_size, +static unsigned int verify_patch_size(u8 family, u32 patch_size, unsigned int size) { - struct cpuinfo_x86 *c = &cpu_data(cpu); u32 max_size; #define F1XH_MPB_MAX_SIZE 2048 @@ -156,7 +155,7 @@ static unsigned int verify_patch_size(int cpu, u32 patch_size, #define F15H_MPB_MAX_SIZE 4096 #define F16H_MPB_MAX_SIZE 3458 - switch (c->x86) { + switch (family) { case 0x14: max_size = F14H_MPB_MAX_SIZE; break; @@ -277,9 +276,8 @@ static void cleanup(void) * driver cannot continue functioning normally. In such cases, we tear * down everything we've used up so far and exit. */ -static int verify_and_add_patch(unsigned int cpu, u8 *fw, unsigned int leftover) +static int verify_and_add_patch(u8 family, u8 *fw, unsigned int leftover) { - struct cpuinfo_x86 *c = &cpu_data(cpu); struct microcode_header_amd *mc_hdr; struct ucode_patch *patch; unsigned int patch_size, crnt_size, ret; @@ -299,7 +297,7 @@ static int verify_and_add_patch(unsigned int cpu, u8 *fw, unsigned int leftover) /* check if patch is for the current family */ proc_fam = ((proc_fam >> 8) & 0xf) + ((proc_fam >> 20) & 0xff); - if (proc_fam != c->x86) + if (proc_fam != family) return crnt_size; if (mc_hdr->nb_dev_id || mc_hdr->sb_dev_id) { @@ -308,7 +306,7 @@ static int verify_and_add_patch(unsigned int cpu, u8 *fw, unsigned int leftover) return crnt_size; } - ret = verify_patch_size(cpu, patch_size, leftover); + ret = verify_patch_size(family, patch_size, leftover); if (!ret) { pr_err("Patch-ID 0x%08x: size mismatch.\n", mc_hdr->patch_id); return crnt_size; @@ -339,7 +337,8 @@ static int verify_and_add_patch(unsigned int cpu, u8 *fw, unsigned int leftover) return crnt_size; } -static enum ucode_state __load_microcode_amd(int cpu, const u8 *data, size_t size) +static enum ucode_state __load_microcode_amd(u8 family, const u8 *data, + size_t size) { enum ucode_state ret = UCODE_ERROR; unsigned int leftover; @@ -362,7 +361,7 @@ static enum ucode_state __load_microcode_amd(int cpu, const u8 *data, size_t siz } while (leftover) { - crnt_size = verify_and_add_patch(cpu, fw, leftover); + crnt_size = verify_and_add_patch(family, fw, leftover); if (crnt_size < 0) return ret; @@ -373,22 +372,22 @@ static enum ucode_state __load_microcode_amd(int cpu, const u8 *data, size_t siz return UCODE_OK; } -enum ucode_state load_microcode_amd(int cpu, const u8 *data, size_t size) +enum ucode_state load_microcode_amd(u8 family, const u8 *data, size_t size) { enum ucode_state ret; /* free old equiv table */ free_equiv_cpu_table(); - ret = __load_microcode_amd(cpu, data, size); + ret = __load_microcode_amd(family, data, size); if (ret != UCODE_OK) cleanup(); #if defined(CONFIG_MICROCODE_AMD_EARLY) && defined(CONFIG_X86_32) /* save BSP's matching patch for early load */ - if (cpu_data(cpu).cpu_index == boot_cpu_data.cpu_index) { - struct ucode_patch *p = find_patch(cpu); + if (cpu_data(smp_processor_id()).cpu_index == boot_cpu_data.cpu_index) { + struct ucode_patch *p = find_patch(smp_processor_id()); if (p) { memset(amd_bsp_mpb, 0, MPB_MAX_SIZE); memcpy(amd_bsp_mpb, p->data, min_t(u32, ksize(p->data), @@ -441,7 +440,7 @@ static enum ucode_state request_microcode_amd(int cpu, struct device *device, goto fw_release; } - ret = load_microcode_amd(cpu, fw->data, fw->size); + ret = load_microcode_amd(c->x86, fw->data, fw->size); fw_release: release_firmware(fw); diff --git a/arch/x86/kernel/microcode_amd_early.c b/arch/x86/kernel/microcode_amd_early.c index 1d14ffee5749..6073104ccaa3 100644 --- a/arch/x86/kernel/microcode_amd_early.c +++ b/arch/x86/kernel/microcode_amd_early.c @@ -238,25 +238,17 @@ static void __init collect_cpu_sig_on_bsp(void *arg) uci->cpu_sig.sig = cpuid_eax(0x00000001); } #else -static void collect_cpu_info_amd_early(struct cpuinfo_x86 *c, - struct ucode_cpu_info *uci) +void load_ucode_amd_ap(void) { + unsigned int cpu = smp_processor_id(); + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; u32 rev, eax; rdmsr(MSR_AMD64_PATCH_LEVEL, rev, eax); eax = cpuid_eax(0x00000001); - uci->cpu_sig.sig = eax; uci->cpu_sig.rev = rev; - c->microcode = rev; - c->x86 = ((eax >> 8) & 0xf) + ((eax >> 20) & 0xff); -} - -void load_ucode_amd_ap(void) -{ - unsigned int cpu = smp_processor_id(); - - collect_cpu_info_amd_early(&cpu_data(cpu), ucode_cpu_info + cpu); + uci->cpu_sig.sig = eax; if (cpu && !ucode_loaded) { void *ucode; @@ -265,8 +257,10 @@ void load_ucode_amd_ap(void) return; ucode = (void *)(initrd_start + ucode_offset); - if (load_microcode_amd(0, ucode, ucode_size) != UCODE_OK) + eax = ((eax >> 8) & 0xf) + ((eax >> 20) & 0xff); + if (load_microcode_amd(eax, ucode, ucode_size) != UCODE_OK) return; + ucode_loaded = true; } @@ -278,6 +272,8 @@ int __init save_microcode_in_initrd_amd(void) { enum ucode_state ret; void *ucode; + u32 eax; + #ifdef CONFIG_X86_32 unsigned int bsp = boot_cpu_data.cpu_index; struct ucode_cpu_info *uci = ucode_cpu_info + bsp; @@ -293,7 +289,10 @@ int __init save_microcode_in_initrd_amd(void) return 0; ucode = (void *)(initrd_start + ucode_offset); - ret = load_microcode_amd(0, ucode, ucode_size); + eax = cpuid_eax(0x00000001); + eax = ((eax >> 8) & 0xf) + ((eax >> 20) & 0xff); + + ret = load_microcode_amd(eax, ucode, ucode_size); if (ret != UCODE_OK) return -EINVAL; -- cgit v1.2.1