From e57cb3b3f10d005410f09d4598cc6d62b833f2b0 Mon Sep 17 00:00:00 2001 From: Pierre Yves MORDRET Date: Tue, 13 Mar 2018 17:42:06 +0100 Subject: dmaengine: stm32-dma: fix incomplete configuration in cyclic mode When in cyclic mode, the configuration is updated after having started the DMA hardware (STM32_DMA_SCR_EN) leading to incomplete configuration of SMxAR registers. Signed-off-by: Pierre-Yves MORDRET Signed-off-by: Hugues Fruchet Signed-off-by: Vinod Koul --- drivers/dma/stm32-dma.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers/dma/stm32-dma.c') diff --git a/drivers/dma/stm32-dma.c b/drivers/dma/stm32-dma.c index 4099948b6914..fae7de54f00a 100644 --- a/drivers/dma/stm32-dma.c +++ b/drivers/dma/stm32-dma.c @@ -441,6 +441,8 @@ static void stm32_dma_dump_reg(struct stm32_dma_chan *chan) dev_dbg(chan2dev(chan), "SFCR: 0x%08x\n", sfcr); } +static void stm32_dma_configure_next_sg(struct stm32_dma_chan *chan); + static void stm32_dma_start_transfer(struct stm32_dma_chan *chan) { struct stm32_dma_device *dmadev = stm32_dma_get_dev(chan); @@ -483,6 +485,9 @@ static void stm32_dma_start_transfer(struct stm32_dma_chan *chan) if (status) stm32_dma_irq_clear(chan, status); + if (chan->desc->cyclic) + stm32_dma_configure_next_sg(chan); + stm32_dma_dump_reg(chan); /* Start DMA */ @@ -576,8 +581,7 @@ static void stm32_dma_issue_pending(struct dma_chan *c) if (vchan_issue_pending(&chan->vchan) && !chan->desc && !chan->busy) { dev_dbg(chan2dev(chan), "vchan %p: issued\n", &chan->vchan); stm32_dma_start_transfer(chan); - if (chan->desc->cyclic) - stm32_dma_configure_next_sg(chan); + } spin_unlock_irqrestore(&chan->vchan.lock, flags); } -- cgit v1.2.1