From d4260e6dddfe642ab50ec6398aeac794a6aff151 Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Thu, 21 Jul 2011 09:19:57 +0900 Subject: gpio-pch: modify gpio_nums and mask Currently, the number of GPIO pins is set fixed value(=12). Also PIN MASK is set as '0xfff'. However the pins differs by IOH. This patch sets the value correctly. Signed-off-by: Tomoya MORINAGA Signed-off-by: Grant Likely --- drivers/gpio/gpio-pch.c | 31 +++++++++++++++++++++++++------ 1 file changed, 25 insertions(+), 6 deletions(-) (limited to 'drivers/gpio/gpio-pch.c') diff --git a/drivers/gpio/gpio-pch.c b/drivers/gpio/gpio-pch.c index d548069d3912..4ac69bd7ad4a 100644 --- a/drivers/gpio/gpio-pch.c +++ b/drivers/gpio/gpio-pch.c @@ -18,9 +18,6 @@ #include #include -#define PCH_GPIO_ALL_PINS 0xfff /* Mask for GPIO pins 0 to 11 */ -#define GPIO_NUM_PINS 12 /* Specifies number of GPIO PINS GPIO0-GPIO11 */ - struct pch_regs { u32 ien; u32 istatus; @@ -37,6 +34,19 @@ struct pch_regs { u32 reset; }; +enum pch_type_t { + INTEL_EG20T_PCH, + OKISEMI_ML7223m_IOH, /* OKISEMI ML7223 IOH PCIe Bus-m */ + OKISEMI_ML7223n_IOH /* OKISEMI ML7223 IOH PCIe Bus-n */ +}; + +/* Specifies number of GPIO PINS */ +static int gpio_pins[] = { + [INTEL_EG20T_PCH] = 12, + [OKISEMI_ML7223m_IOH] = 8, + [OKISEMI_ML7223n_IOH] = 8, +}; + /** * struct pch_gpio_reg_data - The register store data. * @po_reg: To store contents of PO register. @@ -55,6 +65,7 @@ struct pch_gpio_reg_data { * @gpio: Data for GPIO infrastructure. * @pch_gpio_reg: Memory mapped Register data is saved here * when suspend. + * @ioh: IOH ID * @spinlock: Used for register access protection in * interrupt context pch_irq_mask, * pch_irq_unmask and pch_irq_type; @@ -66,6 +77,7 @@ struct pch_gpio { struct gpio_chip gpio; struct pch_gpio_reg_data pch_gpio_reg; struct mutex lock; + enum pch_type_t ioh; spinlock_t spinlock; }; @@ -100,7 +112,7 @@ static int pch_gpio_direction_output(struct gpio_chip *gpio, unsigned nr, u32 reg_val; mutex_lock(&chip->lock); - pm = ioread32(&chip->reg->pm) & PCH_GPIO_ALL_PINS; + pm = ioread32(&chip->reg->pm) & ((1 << gpio_pins[chip->ioh]) - 1); pm |= (1 << nr); iowrite32(pm, &chip->reg->pm); @@ -122,7 +134,7 @@ static int pch_gpio_direction_input(struct gpio_chip *gpio, unsigned nr) u32 pm; mutex_lock(&chip->lock); - pm = ioread32(&chip->reg->pm) & PCH_GPIO_ALL_PINS; /*bits 0-11*/ + pm = ioread32(&chip->reg->pm) & ((1 << gpio_pins[chip->ioh]) - 1); pm &= ~(1 << nr); iowrite32(pm, &chip->reg->pm); mutex_unlock(&chip->lock); @@ -162,7 +174,7 @@ static void pch_gpio_setup(struct pch_gpio *chip) gpio->set = pch_gpio_set; gpio->dbg_show = NULL; gpio->base = -1; - gpio->ngpio = GPIO_NUM_PINS; + gpio->ngpio = gpio_pins[chip->ioh]; gpio->can_sleep = 0; } @@ -196,6 +208,13 @@ static int __devinit pch_gpio_probe(struct pci_dev *pdev, goto err_iomap; } + if (pdev->device == 0x8803) + chip->ioh = INTEL_EG20T_PCH; + else if (pdev->device == 0x8014) + chip->ioh = OKISEMI_ML7223m_IOH; + else if (pdev->device == 0x8043) + chip->ioh = OKISEMI_ML7223n_IOH; + chip->reg = chip->base; pci_set_drvdata(pdev, chip); mutex_init(&chip->lock); -- cgit v1.2.1