From b78ea84a7d45b9e5ad2eee429a2140065a39d755 Mon Sep 17 00:00:00 2001 From: Andreas Kemnade Date: Thu, 25 Aug 2016 00:27:59 +0200 Subject: phy-twl4030-usb: initialize charging-related stuff via pm_runtime twl4030_phy_power_on() initializes some bits which are required for charging. As they are not set in twl4030_usb_runtime_resume() a call to pm_runtime_get_sync() is not sufficient to enable charging. This patch moves the initialization to twl4030_usb_runtime_resume() so everything needed for charging is initialized upon pm_runtime_get_sync(). That also gives improved possibilities to debug problems in that area because the relevant parts can be checked separately. Charging can be enabled without having the musb subsystem active. As a side effect this hides some bugs in musb which causes unbalanced calls to phy_power_off()/phy_power_on() so that phy->power_count becomes -1. The result is that e.g. the GTA04 phone (dm3730 + twl4030) works finally as a usb gadget again and charging is working. Signed-off-by: Andreas Kemnade Acked-by: Tony Lindgren Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/phy-twl4030-usb.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) (limited to 'drivers/phy') diff --git a/drivers/phy/phy-twl4030-usb.c b/drivers/phy/phy-twl4030-usb.c index 81067b461098..87e6334eab93 100644 --- a/drivers/phy/phy-twl4030-usb.c +++ b/drivers/phy/phy-twl4030-usb.c @@ -440,6 +440,17 @@ static int __maybe_unused twl4030_usb_runtime_resume(struct device *dev) (PHY_CLK_CTRL_CLOCKGATING_EN | PHY_CLK_CTRL_CLK32K_EN)); + twl4030_i2c_access(twl, 1); + twl4030_usb_set_mode(twl, twl->usb_mode); + if (twl->usb_mode == T2_USB_MODE_ULPI) + twl4030_i2c_access(twl, 0); + /* + * According to the TPS65950 TRM, there has to be at least 50ms + * delay between setting POWER_CTRL_OTG_ENAB and enabling charging + * so wait here so that a fully enabled phy can be expected after + * resume + */ + msleep(50); return 0; } @@ -460,11 +471,6 @@ static int twl4030_phy_power_on(struct phy *phy) dev_dbg(twl->dev, "%s\n", __func__); pm_runtime_get_sync(twl->dev); - twl4030_i2c_access(twl, 1); - twl4030_usb_set_mode(twl, twl->usb_mode); - if (twl->usb_mode == T2_USB_MODE_ULPI) - twl4030_i2c_access(twl, 0); - twl->linkstat = MUSB_UNKNOWN; schedule_delayed_work(&twl->id_workaround_work, HZ); return 0; -- cgit v1.2.1