From 072e78b12bf5182a3e2e460388214a291023ef1c Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Mon, 10 Nov 2014 14:43:53 +0100 Subject: regulator: of: Add regulator desc param to of_get_regulator_init_data() The of_get_regulator_init_data() function is used to extract the regulator init_data but information on how to extract certain data is defined in the static regulator descriptor (e.g: how to map the hardware operating modes). Add a const struct regulator_desc * parameter to the function signature so the parsing logic could use the information in the struct regulator_desc. of_get_regulator_init_data() relies on of_get_regulation_constraints() to actually extract the init_data so it has to pass the struct regulator_desc but that is modified on a later patch. Signed-off-by: Javier Martinez Canillas Signed-off-by: Mark Brown --- drivers/regulator/max8952.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/regulator/max8952.c') diff --git a/drivers/regulator/max8952.c b/drivers/regulator/max8952.c index f7f9efcfedb7..6e54d786b22c 100644 --- a/drivers/regulator/max8952.c +++ b/drivers/regulator/max8952.c @@ -174,7 +174,7 @@ static struct max8952_platform_data *max8952_parse_dt(struct device *dev) if (of_property_read_u32(np, "max8952,ramp-speed", &pd->ramp_speed)) dev_warn(dev, "max8952,ramp-speed property not specified, defaulting to 32mV/us\n"); - pd->reg_data = of_get_regulator_init_data(dev, np); + pd->reg_data = of_get_regulator_init_data(dev, np, ®ulator); if (!pd->reg_data) { dev_err(dev, "Failed to parse regulator init data\n"); return NULL; -- cgit v1.2.1