From d68cd75992f95d6977956fb227f02e6d532f3d26 Mon Sep 17 00:00:00 2001 From: Linas Vepstas Date: Fri, 5 Oct 2007 15:55:04 -0400 Subject: [SCSI] sym53c8xx: PCI Error Recovery support This patch adds the PCI error recovery callbacks to the Symbios SCSI device driver. It includes support for First Failure Data Capture. Signed-off-by: Linas Vepstas Assorted changes to initial patches, including returning IRQ_NONE from the interrupt handler if the device is offline and re-using the eh_done completion in the scsi error handler. Signed-off-by: Matthew Wilcox Signed-off-by: James Bottomley --- drivers/scsi/sym53c8xx_2/sym_glue.c | 179 +++++++++++++++++++++++++++++++++++- drivers/scsi/sym53c8xx_2/sym_glue.h | 3 + drivers/scsi/sym53c8xx_2/sym_hipd.c | 25 ++++- 3 files changed, 200 insertions(+), 7 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c index 4de0692f5c4f..67a577db5d18 100644 --- a/drivers/scsi/sym53c8xx_2/sym_glue.c +++ b/drivers/scsi/sym53c8xx_2/sym_glue.c @@ -134,7 +134,7 @@ static struct scsi_transport_template *sym2_transport_template = NULL; * Driver private area in the SCSI command structure. */ struct sym_ucmd { /* Override the SCSI pointer structure */ - struct completion *eh_done; /* For error handling */ + struct completion *eh_done; /* SCSI error handling */ }; #define SYM_UCMD_PTR(cmd) ((struct sym_ucmd *)(&(cmd)->SCp)) @@ -556,6 +556,10 @@ static irqreturn_t sym53c8xx_intr(int irq, void *dev_id) { struct sym_hcb *np = dev_id; + /* Avoid spinloop trying to handle interrupts on frozen device */ + if (pci_channel_offline(np->s.device)) + return IRQ_NONE; + if (DEBUG_FLAGS & DEBUG_TINY) printf_debug ("["); spin_lock(np->s.host->host_lock); @@ -598,6 +602,7 @@ static int sym_eh_handler(int op, char *opname, struct scsi_cmnd *cmd) struct sym_hcb *np = SYM_SOFTC_PTR(cmd); struct sym_ucmd *ucmd = SYM_UCMD_PTR(cmd); struct Scsi_Host *host = cmd->device->host; + struct pci_dev *pdev = np->s.device; SYM_QUEHEAD *qp; int cmd_queued = 0; int sts = -1; @@ -605,6 +610,38 @@ static int sym_eh_handler(int op, char *opname, struct scsi_cmnd *cmd) dev_warn(&cmd->device->sdev_gendev, "%s operation started.\n", opname); + /* We may be in an error condition because the PCI bus + * went down. In this case, we need to wait until the + * PCI bus is reset, the card is reset, and only then + * proceed with the scsi error recovery. There's no + * point in hurrying; take a leisurely wait. + */ +#define WAIT_FOR_PCI_RECOVERY 35 + if (pci_channel_offline(pdev)) { + struct host_data *hostdata = shost_priv(host); + struct completion *io_reset; + int finished_reset = 0; + init_completion(&eh_done); + spin_lock_irq(host->host_lock); + /* Make sure we didn't race */ + if (pci_channel_offline(pdev)) { + if (!hostdata->io_reset) + hostdata->io_reset = &eh_done; + io_reset = hostdata->io_reset; + } else { + io_reset = NULL; + } + + if (!pci_channel_offline(pdev)) + finished_reset = 1; + spin_unlock_irq(host->host_lock); + if (!finished_reset) + finished_reset = wait_for_completion_timeout(io_reset, + WAIT_FOR_PCI_RECOVERY*HZ); + if (!finished_reset) + return SCSI_FAILED; + } + spin_lock_irq(host->host_lock); /* This one is queued in some place -> to wait for completion */ FOR_EACH_QUEUED_ELEMENT(&np->busy_ccbq, qp) { @@ -630,7 +667,7 @@ static int sym_eh_handler(int op, char *opname, struct scsi_cmnd *cmd) break; case SYM_EH_HOST_RESET: sym_reset_scsi_bus(np, 0); - sym_start_up (np, 1); + sym_start_up(np, 1); sts = 0; break; default: @@ -1435,7 +1472,7 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt, /* * Start the SCRIPTS. */ - sym_start_up (np, 1); + sym_start_up(np, 1); /* * Start the timer daemon @@ -1823,6 +1860,134 @@ static void __devexit sym2_remove(struct pci_dev *pdev) attach_count--; } +/** + * sym2_io_error_detected() - called when PCI error is detected + * @pdev: pointer to PCI device + * @state: current state of the PCI slot + */ +static pci_ers_result_t sym2_io_error_detected(struct pci_dev *pdev, + enum pci_channel_state state) +{ + /* If slot is permanently frozen, turn everything off */ + if (state == pci_channel_io_perm_failure) { + sym2_remove(pdev); + return PCI_ERS_RESULT_DISCONNECT; + } + + disable_irq(pdev->irq); + pci_disable_device(pdev); + + /* Request that MMIO be enabled, so register dump can be taken. */ + return PCI_ERS_RESULT_CAN_RECOVER; +} + +/** + * sym2_io_slot_dump - Enable MMIO and dump debug registers + * @pdev: pointer to PCI device + */ +static pci_ers_result_t sym2_io_slot_dump(struct pci_dev *pdev) +{ + struct sym_hcb *np = pci_get_drvdata(pdev); + + sym_dump_registers(np); + + /* Request a slot reset. */ + return PCI_ERS_RESULT_NEED_RESET; +} + +/** + * sym2_reset_workarounds - hardware-specific work-arounds + * + * This routine is similar to sym_set_workarounds(), except + * that, at this point, we already know that the device was + * succesfully intialized at least once before, and so most + * of the steps taken there are un-needed here. + */ +static void sym2_reset_workarounds(struct pci_dev *pdev) +{ + u_char revision; + u_short status_reg; + struct sym_chip *chip; + + pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision); + chip = sym_lookup_chip_table(pdev->device, revision); + + /* Work around for errant bit in 895A, in a fashion + * similar to what is done in sym_set_workarounds(). + */ + pci_read_config_word(pdev, PCI_STATUS, &status_reg); + if (!(chip->features & FE_66MHZ) && (status_reg & PCI_STATUS_66MHZ)) { + status_reg = PCI_STATUS_66MHZ; + pci_write_config_word(pdev, PCI_STATUS, status_reg); + pci_read_config_word(pdev, PCI_STATUS, &status_reg); + } +} + +/** + * sym2_io_slot_reset() - called when the pci bus has been reset. + * @pdev: pointer to PCI device + * + * Restart the card from scratch. + */ +static pci_ers_result_t sym2_io_slot_reset(struct pci_dev *pdev) +{ + struct sym_hcb *np = pci_get_drvdata(pdev); + + printk(KERN_INFO "%s: recovering from a PCI slot reset\n", + sym_name(np)); + + if (pci_enable_device(pdev)) { + printk(KERN_ERR "%s: Unable to enable after PCI reset\n", + sym_name(np)); + return PCI_ERS_RESULT_DISCONNECT; + } + + pci_set_master(pdev); + enable_irq(pdev->irq); + + /* If the chip can do Memory Write Invalidate, enable it */ + if (np->features & FE_WRIE) { + if (pci_set_mwi(pdev)) + return PCI_ERS_RESULT_DISCONNECT; + } + + /* Perform work-arounds, analogous to sym_set_workarounds() */ + sym2_reset_workarounds(pdev); + + /* Perform host reset only on one instance of the card */ + if (PCI_FUNC(pdev->devfn) == 0) { + if (sym_reset_scsi_bus(np, 0)) { + printk(KERN_ERR "%s: Unable to reset scsi host\n", + sym_name(np)); + return PCI_ERS_RESULT_DISCONNECT; + } + sym_start_up(np, 1); + } + + return PCI_ERS_RESULT_RECOVERED; +} + +/** + * sym2_io_resume() - resume normal ops after PCI reset + * @pdev: pointer to PCI device + * + * Called when the error recovery driver tells us that its + * OK to resume normal operation. Use completion to allow + * halted scsi ops to resume. + */ +static void sym2_io_resume(struct pci_dev *pdev) +{ + struct sym_hcb *np = pci_get_drvdata(pdev); + struct Scsi_Host *shost = np->s.host; + struct host_data *hostdata = shost_priv(shost); + + spin_lock_irq(shost->host_lock); + if (hostdata->io_reset) + complete_all(hostdata->io_reset); + hostdata->io_reset = NULL; + spin_unlock_irq(shost->host_lock); +} + static void sym2_get_signalling(struct Scsi_Host *shost) { struct sym_hcb *np = sym_get_hcb(shost); @@ -1985,11 +2150,19 @@ static struct pci_device_id sym2_id_table[] __devinitdata = { MODULE_DEVICE_TABLE(pci, sym2_id_table); +static struct pci_error_handlers sym2_err_handler = { + .error_detected = sym2_io_error_detected, + .mmio_enabled = sym2_io_slot_dump, + .slot_reset = sym2_io_slot_reset, + .resume = sym2_io_resume, +}; + static struct pci_driver sym2_driver = { .name = NAME53C8XX, .id_table = sym2_id_table, .probe = sym2_probe, .remove = __devexit_p(sym2_remove), + .err_handler = &sym2_err_handler, }; static int __init sym2_init(void) diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.h b/drivers/scsi/sym53c8xx_2/sym_glue.h index bea7bcc69ebd..d5ba5aae6c5a 100644 --- a/drivers/scsi/sym53c8xx_2/sym_glue.h +++ b/drivers/scsi/sym53c8xx_2/sym_glue.h @@ -40,6 +40,7 @@ #ifndef SYM_GLUE_H #define SYM_GLUE_H +#include #include #include #include @@ -220,6 +221,7 @@ struct sym_device { */ struct host_data { struct sym_hcb *ncb; + struct completion *io_reset; /* PCI error handling */ }; static inline struct sym_hcb * sym_get_hcb(struct Scsi_Host *host) @@ -265,5 +267,6 @@ void sym_xpt_async_bus_reset(struct sym_hcb *np); void sym_xpt_async_sent_bdr(struct sym_hcb *np, int target); int sym_setup_data_and_start (struct sym_hcb *np, struct scsi_cmnd *csio, struct sym_ccb *cp); void sym_log_bus_error(struct sym_hcb *np); +void sym_dump_registers(struct sym_hcb *np); #endif /* SYM_GLUE_H */ diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c index 21cd4c7f5289..af24c447b195 100644 --- a/drivers/scsi/sym53c8xx_2/sym_hipd.c +++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c @@ -1180,10 +1180,10 @@ static void sym_log_hard_error(struct sym_hcb *np, u_short sist, u_char dstat) scr_to_cpu((int) *(u32 *)(script_base + script_ofs))); } - printf ("%s: regdump:", sym_name(np)); - for (i=0; i<24;i++) - printf (" %02x", (unsigned)INB_OFF(np, i)); - printf (".\n"); + printf("%s: regdump:", sym_name(np)); + for (i = 0; i < 24; i++) + printf(" %02x", (unsigned)INB_OFF(np, i)); + printf(".\n"); /* * PCI BUS error. @@ -1192,6 +1192,16 @@ static void sym_log_hard_error(struct sym_hcb *np, u_short sist, u_char dstat) sym_log_bus_error(np); } +void sym_dump_registers(struct sym_hcb *np) +{ + u_short sist; + u_char dstat; + + sist = INW(np, nc_sist); + dstat = INB(np, nc_dstat); + sym_log_hard_error(np, sist, dstat); +} + static struct sym_chip sym_dev_table[] = { {PCI_DEVICE_ID_NCR_53C810, 0x0f, "810", 4, 8, 4, 64, FE_ERL} @@ -2809,6 +2819,13 @@ void sym_interrupt (struct sym_hcb *np) dstat |= INB(np, nc_dstat); istatc = INB(np, nc_istat); istat |= istatc; + + /* Prevent deadlock waiting on a condition that may + * never clear. */ + if (unlikely(sist == 0xffff && dstat == 0xff)) { + if (pci_channel_offline(np->s.device)) + return; + } } while (istatc & (SIP|DIP)); if (DEBUG_FLAGS & DEBUG_TINY) -- cgit v1.2.1