/* dvb-usb.h is part of the DVB USB library. * * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de) * see dvb-usb-init.c for copyright information. * * the headerfile, all dvb-usb-drivers have to include. * * TODO: clean-up the structures for unused fields and update the comments */ #ifndef DVB_USB_H #define DVB_USB_H #include #include #include #include #include #include "dvb_frontend.h" #include "dvb_demux.h" #include "dvb_net.h" #include "dmxdev.h" #include "dvb-usb-ids.h" struct dvb_usb_driver_info { const char *name; const char *rc_map; const struct dvb_usb_device_properties *props; }; #define DVB_USB_DEVICE(vend, prod, props_, name_, rc) \ .match_flags = USB_DEVICE_ID_MATCH_DEVICE, \ .idVendor = (vend), \ .idProduct = (prod), \ .driver_info = (kernel_ulong_t) &((struct dvb_usb_driver_info) { \ .props = (props_), \ .name = (name_), \ .rc_map = (rc), \ }) struct dvb_usb_device; struct dvb_usb_adapter; struct usb_data_stream; /** * Properties of USB streaming - TODO this structure should be somewhere else * describes the kind of USB transfer used for data-streaming. * (BULK or ISOC) */ struct usb_data_stream_properties { #define USB_BULK 1 #define USB_ISOC 2 int type; int count; int endpoint; union { struct { int buffersize; /* per URB */ } bulk; struct { int framesperurb; int framesize; int interval; } isoc; } u; }; /** * struct dvb_usb_adapter_properties - properties of a dvb-usb-adapter. * A DVB-USB-Adapter is basically a dvb_adapter which is present on a * USB-device. * @caps: capabilities of the DVB USB device. * @pid_filter_count: number of PID filter position in the optional hardware * PID-filter. * @num_frontends: number of frontends of the DVB USB adapter. * @frontend_ctrl: called to power on/off active frontend. * @streaming_ctrl: called to start and stop the MPEG2-TS streaming of the * device (not URB submitting/killing). * @pid_filter_ctrl: called to en/disable the PID filter, if any. * @pid_filter: called to set/unset a PID for filtering. * @frontend_attach: called to attach the possible frontends (fill fe-field * of struct dvb_usb_device). * @tuner_attach: called to attach the correct tuner and to fill pll_addr, * pll_desc and pll_init_buf of struct dvb_usb_device). * @stream: configuration of the USB streaming */ #define MAX_NO_OF_FE_PER_ADAP 3 struct dvb_usb_adapter_properties { #define DVB_USB_ADAP_HAS_PID_FILTER 0x01 #define DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF 0x02 #define DVB_USB_ADAP_NEED_PID_FILTERING 0x04 #define DVB_USB_ADAP_RECEIVES_204_BYTE_TS 0x08 #define DVB_USB_ADAP_RECEIVES_RAW_PAYLOAD 0x10 int caps; int size_of_priv; int pid_filter_count; int (*pid_filter_ctrl) (struct dvb_usb_adapter *, int); int (*pid_filter) (struct dvb_usb_adapter *, int, u16, int); int (*fe_ioctl_override) (struct dvb_frontend *, unsigned int, void *, unsigned int); struct usb_data_stream_properties stream; }; /** * struct dvb_rc properties of remote controller, using rc-core * @rc_codes: name of rc codes table * @protocol: type of protocol(s) currently used by the driver * @allowed_protos: protocol(s) supported by the driver * @driver_type: Used to point if a device supports raw mode * @change_protocol: callback to change protocol * @rc_query: called to query an event event. * @rc_interval: time in ms between two queries. * @bulk_mode: device supports bulk mode for RC (disable polling mode) */ struct dvb_usb_rc { char *map_name; u64 allowed_protos; int (*change_protocol)(struct rc_dev *dev, u64 rc_type); int (*query) (struct dvb_usb_device *d); int interval; const enum rc_driver_type driver_type; bool bulk_mode; }; /** * struct dvb_usb_device_properties - properties of a dvb-usb-device * @owner: owner of the dvb_adapter * @usb_ctrl: which USB device-side controller is in use. Needed for firmware * download. * @firmware: name of the firmware file. * @download_firmware: called to download the firmware when the usb_ctrl is * DEVICE_SPECIFIC. * @no_reconnect: device doesn't do a reconnect after downloading the firmware, * so do the warm initialization right after it * * @size_of_priv: how many bytes shall be allocated for the private field * of struct dvb_usb_device. * * @power_ctrl: called to enable/disable power of the device. * @read_mac_address: called to read the MAC address of the device. * @identify_state: called to determine the state (cold or warm), when it * is not distinguishable by the USB IDs. * @init: called after adapters are created in order to finalize device * configuration. * * @rc: remote controller properties * * @i2c_algo: i2c_algorithm if the device has I2CoverUSB. * * @generic_bulk_ctrl_endpoint: most of the DVB USB devices have a generic * endpoint which received control messages with bulk transfers. When this * is non-zero, one can use dvb_usb_generic_rw and dvb_usb_generic_write- * helper functions. * * @generic_bulk_ctrl_endpoint_response: some DVB USB devices use a separate * endpoint for responses to control messages sent with bulk transfers via * the generic_bulk_ctrl_endpoint. When this is non-zero, this will be used * instead of the generic_bulk_ctrl_endpoint when reading usb responses in * the dvb_usb_generic_rw helper function. */ #define MAX_NO_OF_ADAPTER_PER_DEVICE 2 struct dvb_usb_device_properties { const char *driver_name; struct module *owner; short *adapter_nr; u8 bInterfaceNumber; int size_of_priv; const char *firmware; int (*get_firmware_name) (struct dvb_usb_device *, const char **); #define RECONNECTS_USB 1 int (*download_firmware) (struct dvb_usb_device *, const struct firmware *); int num_adapters; int (*get_adapter_count) (struct dvb_usb_device *); struct dvb_usb_adapter_properties adapter[MAX_NO_OF_ADAPTER_PER_DEVICE]; int (*power_ctrl) (struct dvb_usb_device *, int); int (*read_config) (struct dvb_usb_device *d); int (*read_mac_address) (struct dvb_usb_device *, u8 []); int (*frontend_attach) (struct dvb_usb_adapter *); int (*tuner_attach) (struct dvb_usb_adapter *); int (*frontend_ctrl) (struct dvb_frontend *, int); int (*streaming_ctrl) (struct dvb_usb_adapter *, int); #define WARM 0 #define COLD 1 int (*identify_state) (struct dvb_usb_device *); int (*init) (struct dvb_usb_device *); void (*disconnect) (struct dvb_usb_device *); int (*get_rc_config) (struct dvb_usb_device *, struct dvb_usb_rc *); int (*get_usb_stream_config) (struct dvb_frontend *, struct usb_data_stream_properties *); int (*get_ts_config) (struct dvb_frontend *, unsigned int *); struct i2c_algorithm *i2c_algo; int generic_bulk_ctrl_endpoint; int generic_bulk_ctrl_endpoint_response; }; /** * struct usb_data_stream - generic object of an USB stream * @buf_num: number of buffer allocated. * @buf_size: size of each buffer in buf_list. * @buf_list: array containing all allocate buffers for streaming. * @dma_addr: list of dma_addr_t for each buffer in buf_list. * * @urbs_initialized: number of URBs initialized. * @urbs_submitted: number of URBs submitted. */ #define MAX_NO_URBS_FOR_DATA_STREAM 10 struct usb_data_stream { struct usb_device *udev; struct usb_data_stream_properties props; #define USB_STATE_INIT 0x00 #define USB_STATE_URB_BUF 0x01 int state; void (*complete) (struct usb_data_stream *, u8 *, size_t); struct urb *urb_list[MAX_NO_URBS_FOR_DATA_STREAM]; int buf_num; unsigned long buf_size; u8 *buf_list[MAX_NO_URBS_FOR_DATA_STREAM]; dma_addr_t dma_addr[MAX_NO_URBS_FOR_DATA_STREAM]; int urbs_initialized; int urbs_submitted; void *user_priv; }; /** * struct dvb_usb_adapter - a DVB adapter on a USB device * @id: index of this adapter (starting with 0). * * @feedcount: number of reqested feeds (used for streaming-activation) * @pid_filtering: is hardware pid_filtering used or not. * * @pll_addr: I2C address of the tuner for programming * @pll_init: array containing the initialization buffer * @pll_desc: pointer to the appropriate struct dvb_pll_desc * @tuner_pass_ctrl: called to (de)activate tuner passthru of the demod or * the board * * @dvb_adap: device's dvb_adapter. * @dmxdev: device's dmxdev. * @demux: device's software demuxer. * @dvb_net: device's dvb_net interfaces. * @dvb_frontend: device's frontend. * @max_feed_count: how many feeds can be handled simultaneously by this * device * * @fe_init: rerouted frontend-init (wakeup) function. * @fe_sleep: rerouted frontend-sleep function. * * @stream: the usb data stream. */ struct dvb_usb_adapter { #define DVB_USB_ADAP_STATE_INIT 0x000 #define DVB_USB_ADAP_STATE_DVB 0x001 int state; struct dvb_usb_device *dev; struct dvb_usb_adapter_properties props; struct usb_data_stream stream; u8 id; int pid_filtering; int feedcount; int max_feed_count; /* dvb */ struct dvb_adapter dvb_adap; struct dmxdev dmxdev; struct dvb_demux demux; struct dvb_net dvb_net; struct dvb_frontend *fe[MAX_NO_OF_FE_PER_ADAP]; int (*fe_init[MAX_NO_OF_FE_PER_ADAP]) (struct dvb_frontend *); int (*fe_sleep[MAX_NO_OF_FE_PER_ADAP]) (struct dvb_frontend *); int active_fe; int num_frontends_initialized; }; /** * struct dvb_usb_device - object of a DVB USB device * @props: copy of the struct dvb_usb_properties this device belongs to. * @desc: pointer to the device's struct dvb_usb_device_description. * @state: initialization and runtime state of the device. * * @powered: indicated whether the device is power or not. * Powered is in/decremented for each call to modify the state. * @udev: pointer to the device's struct usb_device. * * @usb_mutex: semaphore of USB control messages (reading needs two messages) * @i2c_mutex: semaphore for i2c-transfers * * @i2c_adap: device's i2c_adapter if it uses I2CoverUSB * * @rc_dev: rc device for the remote control (rc-core mode) * @input_dev: input device for the remote control (legacy mode) * @rc_query_work: struct work_struct frequent rc queries * @last_event: last triggered event * @last_state: last state (no, pressed, repeat) * @priv: private data of the actual driver (allocate by dvb-usb, size defined * in size_of_priv of dvb_usb_properties). */ struct dvb_usb_device { struct dvb_usb_device_properties props; const char *name; const char *rc_map; struct dvb_usb_rc rc; struct usb_device *udev; struct work_struct probe_work; pid_t work_pid; struct usb_interface *intf; #define DVB_USB_STATE_INIT 0x000 #define DVB_USB_STATE_I2C 0x001 #define DVB_USB_STATE_DVB 0x002 #define DVB_USB_STATE_REMOTE 0x004 int state; int powered; /* locking */ struct mutex usb_mutex; /* i2c */ struct mutex i2c_mutex; struct i2c_adapter i2c_adap; int num_adapters_initialized; struct dvb_usb_adapter adapter[MAX_NO_OF_ADAPTER_PER_DEVICE]; /* remote control */ struct rc_dev *rc_dev; struct input_dev *input_dev; char rc_phys[64]; struct delayed_work rc_query_work; void *priv; }; extern int dvb_usbv2_probe(struct usb_interface *, const struct usb_device_id *); extern void dvb_usbv2_disconnect(struct usb_interface *); extern int dvb_usbv2_suspend(struct usb_interface *, pm_message_t); extern int dvb_usbv2_resume(struct usb_interface *); /* the generic read/write method for device control */ extern int dvb_usbv2_generic_rw(struct dvb_usb_device *, u8 *, u16, u8 *, u16, int); extern int dvb_usbv2_generic_write(struct dvb_usb_device *, u8 *, u16); #endif