1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
|
* Mediatek JPEG Decoder
Mediatek JPEG Decoder is the JPEG decode hardware present in Mediatek SoCs
Required properties:
- compatible : must be one of the following string:
"mediatek,mt8173-jpgdec"
"mediatek,mt2701-jpgdec"
- reg : physical base address of the jpeg decoder registers and length of
memory mapped region.
- interrupts : interrupt number to the interrupt controller.
- clocks: device clocks, see
Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
- clock-names: must contain "jpgdec-smi" and "jpgdec".
- power-domains: a phandle to the power domain, see
Documentation/devicetree/bindings/power/power_domain.txt for details.
- mediatek,larb: must contain the local arbiters in the current Socs, see
Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
for details.
- iommus: should point to the respective IOMMU block with master port as
argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
for details.
Example:
jpegdec: jpegdec@15004000 {
compatible = "mediatek,mt2701-jpgdec";
reg = <0 0x15004000 0 0x1000>;
interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
clocks = <&imgsys CLK_IMG_JPGDEC_SMI>,
<&imgsys CLK_IMG_JPGDEC>;
clock-names = "jpgdec-smi",
"jpgdec";
power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
mediatek,larb = <&larb2>;
iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
<&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
};
|
