1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
|
/*
* Board setup routines for the Emerson/Artesyn MVME7100
*
* Copyright 2016 Elettra-Sincrotrone Trieste S.C.p.A.
*
* Author: Alessio Igor Bogani <alessio.bogani@elettra.eu>
*
* Based on earlier code by:
*
* Ajit Prem <ajit.prem@emerson.com>
* Copyright 2008 Emerson
*
* USB host fixup is borrowed by:
*
* Martyn Welch <martyn.welch@ge.com>
* Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/pci.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/of_address.h>
#include <asm/udbg.h>
#include <asm/mpic.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
#include "mpc86xx.h"
#define MVME7100_INTERRUPT_REG_2_OFFSET 0x05
#define MVME7100_DS1375_MASK 0x40
#define MVME7100_MAX6649_MASK 0x20
#define MVME7100_ABORT_MASK 0x10
/*
* Setup the architecture
*/
static void __init mvme7100_setup_arch(void)
{
struct device_node *bcsr_node;
void __iomem *mvme7100_regs = NULL;
u8 reg;
if (ppc_md.progress)
ppc_md.progress("mvme7100_setup_arch()", 0);
#ifdef CONFIG_SMP
mpc86xx_smp_init();
#endif
fsl_pci_assign_primary();
/* Remap BCSR registers */
bcsr_node = of_find_compatible_node(NULL, NULL,
"artesyn,mvme7100-bcsr");
if (bcsr_node) {
mvme7100_regs = of_iomap(bcsr_node, 0);
of_node_put(bcsr_node);
}
if (mvme7100_regs) {
/* Disable ds1375, max6649, and abort interrupts */
reg = readb(mvme7100_regs + MVME7100_INTERRUPT_REG_2_OFFSET);
reg |= MVME7100_DS1375_MASK | MVME7100_MAX6649_MASK
| MVME7100_ABORT_MASK;
writeb(reg, mvme7100_regs + MVME7100_INTERRUPT_REG_2_OFFSET);
} else
pr_warn("Unable to map board registers\n");
pr_info("MVME7100 board from Artesyn\n");
}
/*
* Called very early, device-tree isn't unflattened
*/
static int __init mvme7100_probe(void)
{
unsigned long root = of_get_flat_dt_root();
return of_flat_dt_is_compatible(root, "artesyn,MVME7100");
}
static void mvme7100_usb_host_fixup(struct pci_dev *pdev)
{
unsigned int val;
if (!machine_is(mvme7100))
return;
/* Ensure only ports 1 & 2 are enabled */
pci_read_config_dword(pdev, 0xe0, &val);
pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x2);
/* System clock is 48-MHz Oscillator and EHCI Enabled. */
pci_write_config_dword(pdev, 0xe4, 1 << 5);
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB,
mvme7100_usb_host_fixup);
machine_arch_initcall(mvme7100, mpc86xx_common_publish_devices);
define_machine(mvme7100) {
.name = "MVME7100",
.probe = mvme7100_probe,
.setup_arch = mvme7100_setup_arch,
.init_IRQ = mpc86xx_init_irq,
.get_irq = mpic_get_irq,
.time_init = mpc86xx_time_init,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
#ifdef CONFIG_PCI
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
#endif
};
|
