1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
|
/*
* OMAP3 thermal driver.
*
* Copyright (C) 2011-2012 Texas Instruments Inc.
* Copyright (C) 2014 Pavel Machek <pavel@ucw.cz>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Note
* http://www.ti.com/lit/er/sprz278f/sprz278f.pdf "Advisory
* 3.1.1.186 MMC OCP Clock Not Gated When Thermal Sensor Is Used"
*
* Also TI says:
* Just be careful when you try to make thermal policy like decisions
* based on this sensor. Placement of the sensor w.r.t the actual logic
* generating heat has to be a factor as well. If you are just looking
* for an approximation temperature (thermometerish kind), you might be
* ok with this. I am not sure we'd find any TI data around this.. just a
* heads up.
*/
#include "ti-thermal.h"
#include "ti-bandgap.h"
/*
* OMAP34XX has one instance of thermal sensor for MPU
* need to describe the individual bit fields
*/
static struct temp_sensor_registers
omap34xx_mpu_temp_sensor_registers = {
.temp_sensor_ctrl = 0,
.bgap_soc_mask = BIT(8),
.bgap_eocz_mask = BIT(7),
.bgap_dtemp_mask = 0x7f,
.bgap_mode_ctrl = 0,
.mode_ctrl_mask = BIT(9),
};
/* Thresholds and limits for OMAP34XX MPU temperature sensor */
static struct temp_sensor_data omap34xx_mpu_temp_sensor_data = {
.min_freq = 32768,
.max_freq = 32768,
.max_temp = 125000,
.min_temp = -40000,
.hyst_val = 5000,
};
/*
* Temperature values in milli degree celsius
*/
static const int
omap34xx_adc_to_temp[128] = {
-40000, -40000, -40000, -40000, -40000, -39000, -38000, -36000,
-34000, -32000, -31000, -29000, -28000, -26000, -25000, -24000,
-22000, -21000, -19000, -18000, -17000, -15000, -14000, -12000,
-11000, -9000, -8000, -7000, -5000, -4000, -2000, -1000, 0000,
1000, 3000, 4000, 5000, 7000, 8000, 10000, 11000, 13000, 14000,
15000, 17000, 18000, 20000, 21000, 22000, 24000, 25000, 27000,
28000, 30000, 31000, 32000, 34000, 35000, 37000, 38000, 39000,
41000, 42000, 44000, 45000, 47000, 48000, 49000, 51000, 52000,
53000, 55000, 56000, 58000, 59000, 60000, 62000, 63000, 65000,
66000, 67000, 69000, 70000, 72000, 73000, 74000, 76000, 77000,
79000, 80000, 81000, 83000, 84000, 85000, 87000, 88000, 89000,
91000, 92000, 94000, 95000, 96000, 98000, 99000, 100000,
102000, 103000, 105000, 106000, 107000, 109000, 110000, 111000,
113000, 114000, 116000, 117000, 118000, 120000, 121000, 122000,
124000, 124000, 125000, 125000, 125000, 125000, 125000
};
/* OMAP34XX data */
const struct ti_bandgap_data omap34xx_data = {
.features = TI_BANDGAP_FEATURE_CLK_CTRL | TI_BANDGAP_FEATURE_UNRELIABLE,
.fclock_name = "ts_fck",
.div_ck_name = "ts_fck",
.conv_table = omap34xx_adc_to_temp,
.adc_start_val = 0,
.adc_end_val = 127,
.expose_sensor = ti_thermal_expose_sensor,
.remove_sensor = ti_thermal_remove_sensor,
.sensors = {
{
.registers = &omap34xx_mpu_temp_sensor_registers,
.ts_data = &omap34xx_mpu_temp_sensor_data,
.domain = "cpu",
.slope = 0,
.constant = 20000,
.slope_pcb = 0,
.constant_pcb = 20000,
.register_cooling = NULL,
.unregister_cooling = NULL,
},
},
.sensor_count = 1,
};
|