Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull final round of SCSI updates from James Bottomley:
 "Sorry for the delay in this patch which was mostly caused by getting
  the merger of the mpt2/mpt3sas driver, which was seen as an essential
  item of maintenance work to do before the drivers diverge too much.
  Unfortunately, this caused a compile failure (detected by linux-next),
  which then had to be fixed up and incubated.

  In addition to the mpt2/3sas rework, there are updates from pm80xx,
  lpfc, bnx2fc, hpsa, ipr, aacraid, megaraid_sas, storvsc and ufs plus
  an assortment of changes including some year 2038 issues, a fix for a
  remove before detach issue in some drivers and a couple of other minor
  issues"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits)
  mpt3sas: fix inline markers on non inline function declarations
  sd: Clear PS bit before Mode Select.
  ibmvscsi: set max_lun to 32
  ibmvscsi: display default value for max_id, max_lun and max_channel.
  mptfusion: don't allow negative bytes in kbuf_alloc_2_sgl()
  scsi: pmcraid: replace struct timeval with ktime_get_real_seconds()
  mvumi: 64bit value for seconds_since1970
  be2iscsi: Fix bogus WARN_ON length check
  scsi_scan: don't dump trace when scsi_prep_async_scan() is called twice
  mpt3sas: Bump mpt3sas driver version to 09.102.00.00
  mpt3sas: Single driver module which supports both SAS 2.0 & SAS 3.0 HBAs
  mpt2sas, mpt3sas: Update the driver versions
  mpt3sas: setpci reset kernel oops fix
  mpt3sas: Added OEM Gen2 PnP ID branding names
  mpt3sas: Refcount fw_events and fix unsafe list usage
  mpt3sas: Refcount sas_device objects and fix unsafe list usage
  mpt3sas: sysfs attribute to report Backup Rail Monitor Status
  mpt3sas: Ported WarpDrive product SSS6200 support
  mpt3sas: fix for driver fails EEH, recovery from injected pci bus error
  mpt3sas: Manage MSI-X vectors according to HBA device type
  ...

1 files changed, 10 insertions, 1 deletions

diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
index 53579197eca2..03c0e989e020 100644
--- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
+++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
@@ -4,11 +4,18 @@ UFSHC nodes are defined to describe on-chip UFS host controllers.
 Each UFS controller instance should have its own node.
 
 Required properties:
-- compatible        : compatible list, contains "jedec,ufs-1.1"
+- compatible		: must contain "jedec,ufs-1.1", may also list one or more
+					  of the following:
+					  "qcom,msm8994-ufshc"
+					  "qcom,msm8996-ufshc"
+					  "qcom,ufshc"
 - interrupts        : <interrupt mapping for UFS host controller IRQ>
 - reg               : <registers mapping>
 
 Optional properties:
+- phys                  : phandle to UFS PHY node
+- phy-names             : the string "ufsphy" when is found in a node, along
+                          with "phys" attribute, provides phandle to UFS PHY node
 - vdd-hba-supply        : phandle to UFS host controller supply regulator node
 - vcc-supply            : phandle to VCC supply regulator node
 - vccq-supply           : phandle to VCCQ supply regulator node
@@ -54,4 +61,6 @@ Example:
 		clocks = <&core 0>, <&ref 0>, <&iface 0>;
 		clock-names = "core_clk", "ref_clk", "iface_clk";
 		freq-table-hz = <100000000 200000000>, <0 0>, <0 0>;
+		phys = <&ufsphy1>;
+		phy-names = "ufsphy";
 	};