Merge tag 'arc-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc

Pull ARC architecture updates from Vineet Gupta:

 - support for HS38 cores based on ARCv2 ISA

     ARCv2 is the next generation ISA from Synopsys and basis for the
     HS3{4,6,8} families of processors which retain the traditional ARC mantra of
     low power and configurability and are now more performant and feature rich.

     HS38x is a 10 stage pipeline core which supports MMU (with huge pages) and
     SMP (upto 4 cores) among other features.

     + www.synopsys.com/dw/ipdir.php?ds=arc-hs38-processor
     + http://news.synopsys.com/2014-10-14-New-DesignWare-ARC-HS38-Processor-Doubles-Performance-for-Embedded-Linux-Applications
     + http://www.embedded.com/electronics-news/4435975/Synopsys-ARC-HS38-core-gives-2X-boost-to-Linux-based-apps

 - support for ARC SDP (Software Development platform): Main Board + CPU Cards
    = AXS101: CPU Card with ARC700 in silicon @ 700 MHz
    = AXS103: CPU Card with HS38x in FPGA

 - refactoring of ARCompact port to accomodate new ARCv2 ISA

 - misc updates/cleanups

* tag 'arc-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (72 commits)
  ARC: Fix build failures for ARCompact in linux-next after ARCv2 support
  ARCv2: Allow older gcc to cope with new regime of ARCv2/ARCompact support
  ARCv2: [vdk] dts files and defconfig for HS38 VDK
  ARCv2: [axs103] Support ARC SDP FPGA platform for HS38x cores
  ARC: [axs101] Prepare for AXS103
  ARCv2: [nsim*hs*] Support simulation platforms for HS38x cores
  ARCv2: All bits in place, allow ARCv2 builds
  ARCv2: SLC: Handle explcit flush for DMA ops (w/o IO-coherency)
  ARCv2: STAR 9000837815 workaround hardware exclusive transactions livelock
  ARC: Reduce bitops lines of code using macros
  ARCv2: barriers
  arch: conditionally define smp_{mb,rmb,wmb}
  ARC: add smp barriers around atomics per Documentation/atomic_ops.txt
  ARC: add compiler barrier to LLSC based cmpxchg
  ARCv2: SMP: intc: IDU 2nd level intc for dynamic IRQ distribution
  ARCv2: SMP: clocksource: Enable Global Real Time counter
  ARCv2: SMP: ARConnect debug/robustness
  ARCv2: SMP: Support ARConnect (MCIP) for Inter-Core-Interrupts et al
  ARC: make plat_smp_ops weak to allow over-rides
  ARCv2: clocksource: Introduce 64bit local RTC counter
  ...

1 files changed, 239 insertions, 0 deletions

diff --git a/arch/arc/kernel/entry-arcv2.S b/arch/arc/kernel/entry-arcv2.S
new file mode 100644
index 000000000000..bd7105d3172f
--- /dev/null
+++ b/arch/arc/kernel/entry-arcv2.S
@@ -0,0 +1,239 @@
+/*
+ * ARCv2 ISA based core Low Level Intr/Traps/Exceptions(non-TLB) Handling
+ *
+ * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>   /* ARC_{EXTRY,EXIT} */
+#include <asm/entry.h>       /* SAVE_ALL_{INT1,INT2,TRAP...} */
+#include <asm/errno.h>
+#include <asm/arcregs.h>
+#include <asm/irqflags.h>
+
+	.cpu HS
+
+#define VECTOR	.word
+
+;############################ Vector Table #################################
+
+	.section .vector,"a",@progbits
+	.align 4
+
+# Initial 16 slots are Exception Vectors
+VECTOR	stext			; Restart Vector (jump to entry point)
+VECTOR	mem_service		; Mem exception
+VECTOR	instr_service		; Instrn Error
+VECTOR	EV_MachineCheck		; Fatal Machine check
+VECTOR	EV_TLBMissI		; Intruction TLB miss
+VECTOR	EV_TLBMissD		; Data TLB miss
+VECTOR	EV_TLBProtV		; Protection Violation
+VECTOR	EV_PrivilegeV		; Privilege Violation
+VECTOR	EV_SWI			; Software Breakpoint
+VECTOR	EV_Trap			; Trap exception
+VECTOR	EV_Extension		; Extn Instruction Exception
+VECTOR	EV_DivZero		; Divide by Zero
+VECTOR	EV_DCError		; Data Cache Error
+VECTOR	EV_Misaligned		; Misaligned Data Access
+VECTOR	reserved		; Reserved slots
+VECTOR	reserved		; Reserved slots
+
+# Begin Interrupt Vectors
+VECTOR	handle_interrupt	; (16) Timer0
+VECTOR	handle_interrupt	; unused (Timer1)
+VECTOR	handle_interrupt	; unused (WDT)
+VECTOR	handle_interrupt	; (19) ICI (inter core interrupt)
+VECTOR	handle_interrupt
+VECTOR	handle_interrupt
+VECTOR	handle_interrupt
+VECTOR	handle_interrupt	; (23) End of fixed IRQs
+
+.rept CONFIG_ARC_NUMBER_OF_INTERRUPTS - 8
+	VECTOR	handle_interrupt
+.endr
+
+	.section .text, "ax",@progbits
+
+res_service:		; processor restart
+	flag    0x1     ; not implemented
+	nop
+	nop
+
+reserved:		; processor restart
+	rtie            ; jump to processor initializations
+
+;##################### Interrupt Handling ##############################
+
+ENTRY(handle_interrupt)
+
+	INTERRUPT_PROLOGUE  irq
+
+	clri		; To make status32.IE agree with CPU internal state
+
+	lr  r0, [ICAUSE]
+
+	mov   blink, ret_from_exception
+
+	b.d  arch_do_IRQ
+	mov r1, sp
+
+END(handle_interrupt)
+
+;################### Non TLB Exception Handling #############################
+
+ENTRY(EV_SWI)
+	flag 1
+END(EV_SWI)
+
+ENTRY(EV_DivZero)
+	flag 1
+END(EV_DivZero)
+
+ENTRY(EV_DCError)
+	flag 1
+END(EV_DCError)
+
+ENTRY(EV_Misaligned)
+
+	EXCEPTION_PROLOGUE
+
+	lr  r0, [efa]	; Faulting Data address
+	mov r1, sp
+
+	FAKE_RET_FROM_EXCPN
+
+	SAVE_CALLEE_SAVED_USER
+	mov r2, sp              ; callee_regs
+
+	bl  do_misaligned_access
+
+	; TBD: optimize - do this only if a callee reg was involved
+	; either a dst of emulated LD/ST or src with address-writeback
+	RESTORE_CALLEE_SAVED_USER
+
+	b   ret_from_exception
+END(EV_Misaligned)
+
+; ---------------------------------------------
+; Protection Violation Exception Handler
+; ---------------------------------------------
+
+ENTRY(EV_TLBProtV)
+
+	EXCEPTION_PROLOGUE
+
+	lr  r0, [efa]	; Faulting Data address
+	mov r1, sp	; pt_regs
+
+	FAKE_RET_FROM_EXCPN
+
+	mov blink, ret_from_exception
+	b   do_page_fault
+
+END(EV_TLBProtV)
+
+; From Linux standpoint Slow Path I/D TLB Miss is same a ProtV as they
+; need to call do_page_fault().
+; ECR in pt_regs provides whether access was R/W/X
+
+.global        call_do_page_fault
+.set call_do_page_fault, EV_TLBProtV
+
+;############# Common Handlers for ARCompact and ARCv2 ##############
+
+#include "entry.S"
+
+;############# Return from Intr/Excp/Trap (ARCv2 ISA Specifics) ##############
+;
+; Restore the saved sys context (common exit-path for EXCPN/IRQ/Trap)
+; IRQ shd definitely not happen between now and rtie
+; All 2 entry points to here already disable interrupts
+
+.Lrestore_regs:
+
+	ld	r0, [sp, PT_status32]	; U/K mode at time of entry
+	lr	r10, [AUX_IRQ_ACT]
+
+	bmsk	r11, r10, 15	; AUX_IRQ_ACT.ACTIVE
+	breq	r11, 0, .Lexcept_ret	; No intr active, ret from Exception
+
+;####### Return from Intr #######
+
+debug_marker_l1:
+	bbit1.nt r0, STATUS_DE_BIT, .Lintr_ret_to_delay_slot
+
+.Lisr_ret_fast_path:
+	; Handle special case #1: (Entry via Exception, Return via IRQ)
+	;
+	; Exception in U mode, preempted in kernel, Intr taken (K mode), orig
+	; task now returning to U mode (riding the Intr)
+	; AUX_IRQ_ACTIVE won't have U bit set (since intr in K mode), hence SP
+	; won't be switched to correct U mode value (from AUX_SP)
+	; So force AUX_IRQ_ACT.U for such a case
+
+	btst	r0, STATUS_U_BIT		; Z flag set if K (Z clear for U)
+	bset.nz	r11, r11, AUX_IRQ_ACT_BIT_U	; NZ means U
+	sr	r11, [AUX_IRQ_ACT]
+
+	INTERRUPT_EPILOGUE  irq
+	rtie
+
+;####### Return from Exception / pure kernel mode #######
+
+.Lexcept_ret:	; Expects r0 has PT_status32
+
+debug_marker_syscall:
+	EXCEPTION_EPILOGUE
+	rtie
+
+;####### Return from Intr to insn in delay slot #######
+
+; Handle special case #2: (Entry via Exception in Delay Slot, Return via IRQ)
+;
+; Intr returning to a Delay Slot (DS) insn
+; (since IRQ NOT allowed in DS in ARCv2, this can only happen if orig
+; entry was via Exception in DS which got preempted in kernel).
+;
+; IRQ RTIE won't reliably restore DE bit and/or BTA, needs handling
+.Lintr_ret_to_delay_slot:
+debug_marker_ds:
+
+	ld	r2, [@intr_to_DE_cnt]
+	add	r2, r2, 1
+	st	r2, [@intr_to_DE_cnt]
+
+	ld	r2, [sp, PT_ret]
+	ld	r3, [sp, PT_status32]
+
+	bic  	r0, r3, STATUS_U_MASK|STATUS_DE_MASK|STATUS_IE_MASK|STATUS_L_MASK
+	st	r0, [sp, PT_status32]
+
+	mov	r1, .Lintr_ret_to_delay_slot_2
+	st	r1, [sp, PT_ret]
+
+	st	r2, [sp, 0]
+	st	r3, [sp, 4]
+
+	b	.Lisr_ret_fast_path
+
+.Lintr_ret_to_delay_slot_2:
+	sub	sp, sp, SZ_PT_REGS
+	st	r9, [sp, -4]
+
+	ld	r9, [sp, 0]
+	sr	r9, [eret]
+
+	ld	r9, [sp, 4]
+	sr	r9, [erstatus]
+
+	ld	r9, [sp, 8]
+	sr	r9, [erbta]
+
+	ld	r9, [sp, -4]
+	add	sp, sp, SZ_PT_REGS
+	rtie
+
+END(ret_from_exception)